Terms of Payment to determine due date as last date of the month

Hi Experts,
Does any one know how to configure a Terms of Payment to determine due date as last date of the month ?
I tried by puting fixed date as 31 in the Terms of Payment in FI but when I am creating in FI-CA it gives me an error "_Term of payment Z003 is inconsistent/not planned_"
Please advice.
Thanks & Regards
Satyajeet

Hi Satyajeet,
It seems the settings that you have maintained in FI are correct.
When you are assigning the payment terms in FI-CA, you need to assign a factory calendar as well to the payment terms in the following config-
IMG->Financial Accounting ->Contract Accounts Receivable and Payable->Postings and Documents->Document->Maintain Payment Terms
If you have already assigned the factory calendar and still the problem persists, can you give the message ID and the message number of the error that you are getting?
Thanks,
Amlan

Similar Messages

Terms of payment in past due date ???

hi ...
Is it possible to maintain due date in past in terms of payment ?
In bizz scenario , if i maintain terms of payment in past due date in stead of future so that automatic posting can happen ....
Regards
mkc

Hi MKC
Your question is unclear - What should post automatically?
James

Terms of payment in CRM order is not getting copied to the Accout

Hi Experts
The terms of payment which has been selected inthe CRM order under the billing tab is appearing up to the invoice created in CRM . But the same terms of payment is not appearing inthe accounting documents generated in ECC.
Can any one suggest how the configuration done or how to do the setting for the same in ECC or at CRM
Regards
Rajesh
Edited by: Rajesh s on Feb 10, 2009 12:55 AM

Hi,
You need to check in ECC if the customer master has the payment terms maitained or not. This could be the reason for the payment terms not being populated into the ECC billing documents.
hope this helps
Shiloo

BIP eBusiness Suite Dates - How to include the last day of the month?

How can I get my report to include the last day of the month 'without' forcing my users to enter the non-intuitive first of the next month as a parm?
I have a report that will generally be run for a month but can be run for any pair of dates representing the first and last date to be included in the report.
When we pass the dates from Oracle Apps to the report it is truncating the date to midnight. This results in the last date entered 'NOT' being included in the report as the second date is marked as "midnight". When I attempt to simply add "=1" to the end date it fails due to formatting issues in apps (only). I have gotten this to work on our Enterprise edition server that we use for testing (only) but it fails in our apps environment.
In APPs we input the date in the format "01-AUG-2007", and this is how it shows in the parm line before the report is submitted as well as in the "View Details" after the report is executed: http://home.swbell.net/grog1//work/req_details_5607586.jpg
However it is odd in that we in the "View Log" entry it shows the date formatted as "2007/08/01 00:00:00": http://home.swbell.net/grog1/work/view_log_5607586.jpg
Even odder is that under diagnostics, "View XML" the date is formatted third way as: "2007/08/01 00:00:00.0" (note it now includes tenths of a second): http://home.swbell.net/grog1/work/view_xml_5607586.jpg
This of course makes it difficult to perform conversions and calculations on the date in the SQL.
Is APPs doing some sort of 'timestamp' conversion?
How can I get my report to include the last day of the month 'without' forcing my users to enter the non-intuitive first of the next month as a parm?
Any feedback is appreciated,
Scott

No. The problem/error occurs long before the data is formatted into xml for presentation to the format template.
The error occurs in the SQL in the 'data' template when I attempt to add a day to the date. It either does not like the implicit conversion with the "+1" and then the use of the "between" with another date or if I attempt to manually convert it has problems with the format mask.
Scott

First date and last date of current year

Hi
how can i get first and last date of current year, thanks for your help

hi,
use FM......... FIRST_AND_LAST_DAY_IN_YEAR_GET
DATA: first LIKE sy-datum,
      last LIKE sy-datum.
CALL FUNCTION 'FIRST_AND_LAST_DAY_IN_YEAR_GET'
EXPORTING
    i_gjahr     = '2007'
    i_periv     = '24'
IMPORTING
    e_first_day = first
    e_last_day = last.
WRITE: / 'First Date', first, '    Last Date', last.
Regards
CNU

Show data of last day of previous month against any day of current month

Hi,
I have fact table which contains data at date level (we have data for oct-2009 to april-2010). Our requirement is to show data of last day of previous month against any day of current month in obiee 11g. I am facing problem in Feb 2010 its picking data of 28-Jan-2010 instead of 31-jan-2010 and for April its picking data of 30-mar-2010 instead of 31-mar -2010.
Any suggestion ???

You're asking to filter your data set to only include rows between:
1) last day of the previous month
2) any day of the current month
This can be achieved with prompting in OBIEE Answers.
last day of previous month = TIMESTAMPADD( SQL_TSI_DAY , -(1), TIMESTAMPADD( SQL_TSI_DAY , DAYOFMONTH( CURRENT_DATE) * -(1) + 1, CURRENT_DATE)) . The problem is you need to make query work within Oracle's Answer syntax.
In the prompt, select the operator type for your date dimension as 'between' and default to 'SQL Results'.
For the 'last day of previous month' , use the query:
SELECT
case when 1=0 then Time."Fiscal Date" else TIMESTAMPADD( SQL_TSI_DAY , -(1), TIMESTAMPADD( SQL_TSI_DAY , DAYOFMONTH( CURRENT_DATE) * -(1) + 1, CURRENT_DATE))
end
FROM ENTER_YOUR_PRESENTATION_FACT_FOLDER_HERE
For the current date, use the query:
SELECT
case when 1=0 then Time."Fiscal Date" else CURRENT_DATE
end
FROM ENTER_YOUR_PRESENTATION_FACT_FOLDER_HERE
Another option is to create a last_date_pervious_month variable in the RPD and have that as the default value in your prompt.

Date of last inventory for the storage bin

Hello,
We would like confirm that when use the T-code LX26 for Carry out Inventory using the Cycle counting method.
Date of last inventory for the storage bin i,e. date when inventory was last taken in the Warehouse number for a any storage bin shows as 00.00.0000(It is not displaying the any date).
Whether this is a System standard behavoiur or Any other reason.
Please guide me waiting for your reply.
Regards
Sarin.

Hi,
Thanks for your reply.
I have checked in the Field,it showing in the Field.
In T-code LX26 if i take a report for entire WM number it show for some of the Old Inventory date for the some of material
You mean to Say bins were not taken into account for the cycle counting.
How it will be,there is any reason for this .
I am waiting for your reply.
Regards
Sridhar

Object date - how to get the last day of the month?

hi all,
I have a date object in which I would like to get the last day of the month. any idea?
eg AUG=31
Feb = 28 (depends if a leap year)
thanks

Use java.util.Calendar
Add 1 month to the day.
Set the day of month to be 1.
Subtract 1 day.
Now you are on the last day of the month you wanted.

Starting date of every week of the month

dear members
how can i find from dual, the start date of every week of the month in a year.
start of week days is the 'Monday'
year month week day date
2011 JAN 1 Monday 03-jan-2011
2011 JAN 2 Monday 10-jan-2011
2011 JAN 3 Monday 17-jan-2011
2011 JAN 4 Monday 24-jan-2011
2011 JAN 5 Monday 31-jan-2011
thanks
teefu

Hello,
You can use this :
with t as (select to_date ('01/01/2011', 'DD/MM/YYYY') start_date from dual)
select date_calc
from (
        select start_date,
                (level-1)*7+trunc (start_date , 'D')+1   as date_calc
        from t
        connect by level <=53)
where trunc(date_calc,'YYYY')=trunc(start_date,'YYYY') ;Regards,
Sylvie

Reference date of last data load in query

Is it possible to referece the date of the data load in a query via user exit / formula variable or some other way?
We have a requirement to display data in a query based on when the data was last loaded. If the data load has not occured this month, then only records from the previous month should come into the result set.
Has anyone ever done anything like this? Or can you think of a way using SY-DATUM in the update rules that would allow you to segment data on the front end?
Thanks!
Adam

Defenitely there would be a better way.
For short term you can use a date filed in cube which is filled using your update rule as sy-datum.
Later you can fiter out while running the query
try using the Infopackage load tables.
if 2004s, try using any of RSDDSTAT*
Mey

Expression - First date and last date of current month, current year

Hi
I need to have 2 ssrs expression as I can use as default parameters in my report where I can - out from my Time dimension, get the
first date of the current, current year - and one where I get last date, current month, current year.
My data source is a SSAS cube and my timedimension is structured like this:
[Time].[Days].&[2009-01-16T00:00:00]
Any suggestions how to solve this ?

Hi ,
You can use below in Default Values in ssrs ;
for first Day of current month and year
="[Time].[Days].&[" +Format(dateadd("m",0,dateserial(year(Today),month(Today),1)), "yyyy-MM-dd")+"T00:00:00]"
output will be ;
[Time].[Days].&[2014-09-01T00:00:00]
For last day of current month and year
="[Time].[Days].&[" +Format(DateSerial(Year(Now()), Month(Now()), "1").AddMonths(1).AddDays(-1), "yyyy-MM-dd")+"T00:00:00]"
output will be ;
[Time].[Days].&[2014-09-30T00:00:00]
Please correct me if I misunderstood your requirement.
Thanks
Please Mark This As Answer or vote for Helpful Post if this helps you to solve your question/problem.

Successive dates with last day of that month being added to succesive date

Hi ,
I have a piece of code that displays the succuessive dates from the given date to tilll date with a date interval of 30 days. My requirement goes some thing like this. since the given date is '26-nov-08' the next successive date should be the number of days in nov(30) added to '26-nov-08'. that will be around 26-dec-08. For this date it has to add the number of days in December(31) to '26-dec-08' and that turns out to be '26-jan-09'. and this must go on till date.
In the below code i have used 30 for the interval of 30 days but the interval has to the last day of the successive date's month( for dec the interval has to 31 and for january the interval has to be 31 and for february 28)
select to_date('26-nov-08', 'dd-mon-yy') + (level - 1) * 30
from dual
connect by level <= trunc((sysdate-to_date('26-nov-08', 'dd-mon-yy'))/30 )Please advice

hi ,
the query sent by you is correct and could it be in corporated for this query :
SELECT TRUNC(inst_due_date) + (LEVEL-1 ) * (ilpa_term_type),iloan_code,LOAN_AMT,FEE_AMT,
LOAN_DATE,LOAN_STATUS_ID
FROM (
SELECT inst_due_date,sm.iloan_code,LOAN_AMT,
FEE_AMT,
LOAN_DATE,
LOAN_STATUS_ID,
decode(sm.ilp_term_type, 26 ,14,24,15,12,(select to_number(to_char(last_day(inst_due_date),'dd')) from dual)) as ilpa_term_type
FROM ST_IL_SCHEDULE sc,ST_IL_MASTER sm
WHERE sc.iloan_code = sm.iloan_code
AND sc.inst_num = (SELECT MAX(inst_num) FROM ST_IL_SCHEDULE b WHERE b.iloan_code = sc.iloan_code)
AND sc.iloan_code =123456789)
CONNECT BY LEVEL <= TRUNC((TRUNC(SYSDATE)-TRUNC(inst_due_date))/(ilpa_term_type) )
Here we are using the decode concept if ilp_term_type = 26 then 14 but we need to implement the code of adding the number of days to that month in place of this code :
select to_number(to_char(last_day(inst_due_date),'dd')) from dual:
Please advice

Month end accrual posting date- Last day of the month

Hi Experts,
I have set up month end accruals for PY US by configuring posting dates, LDCD, WageType accrual processing class, Schema changes. I have also set the closing dates as the end of the month.
Now after I do the posting , there are three documents getting generated.
1. Accrual posting document with first day of the current month
2. Normal Payroll posting document with payroll period posting date
3. Accrual reversal document with first day of the following month.
My Question is: As per standard SAP configuration, the month end accrual will have first day of the month. Can we customize this to end of the month for doc#1 - accrual document?
Please do let me know your suggestion and ideas.
Thanks,
Amosha

Hello,
I have a similar question and I hope to have more details on how to change the posting date.
The point is that I have an amount of 1200 and I have to post 100 for each month.
Key Date for Accruals: 31.01.2011
I posted 100 with Document date: 31.01.2011 and Posting date 31.01.2011
Key Date for Accruals: 28.01.2011
I posted 200 with Document date: 28.02.2011 and Posting date 28.02.2011
Also I reversed the amount posted in the previous month (100) with Document date: 31.01.2011 Posting date 28.02.2011
And so on...
The problem are the dates because I need to post the amount at the end of each month (28/02) and to reverse the previous amount at the beginning of the next month (01/02).
How can I change these dates?
Thanks a lot in advance
Kind Regards,
E.

How to calculate start date and last date for current week

Dear All.
i want to calculate the start of the current week as well as the last date of the current week, our week start from Saturday and ends of Friday i.e. Saturday is the first day of the week and Friday is the last day of the week.
How can i acheive this in universe Designer?.
Please help...

Hi
the formulas in webi will be as follows
for startdate
=RelativeDate(LastDayOfWeek(CurrentDate());-8)
for enddate:
=RelativeDate(LastDayOfWeek(CurrentDate());-2)
Regards,
Ranganath

Display data for last working day of month

Hi
I am trying to chart values for the last six years but only to plot the value for the last working day of the month, except for the current month where I am taking an average of the month so far. Everything I've tried has so far failed spectacularly. Has anyone resolved a similar problem?

If I understand your dilemma correctly, you may want to create a cross-tab and then create the chart off of the cross-tab. Is the data in your tables that you want to chart on something like this:
         4/30   5/30   6/30   7/31   8/29       Sept.
Row 1    20      30      10      25      20    (avg for month)
Row 2    5         10      8       15     15    (avg for month)
etc.
If so, 1) can you show an example of the data and 2) what kind of chart do you want to create?

Terms of Payment to determine due date as last date of the month

Similar Messages

Maybe you are looking for