Test Drive DBADMIN password

Anybody know what the default DBADMIN user id is in the test drive DB N4S?
I am trying to run dbanalyzer on N4s database tried sqdn4s with password that I setup on install.
But not working.
Tried sdb also no success.
Thanks Bryan
Edited by: Bryan Kelley on Feb 19, 2009 1:31 AM

Figured it out,
sapn4sadm is password.
Also running dbanalyzer as n4sadm works with no prompts.
Thanks

Similar Messages

N4S Test Drive SAP* Password in New Client

I've just installed the N4S Test Drive, and created a new client to explore in. However, I can't log into that client as SAP* with the same default password used to log into client 001.
I've also tried the original date password, but without success - does anyone know what I should be using?
Many thanks.

Hi,
first create following parameter in instance profile using RZ10,
login/no_automatic_user_sapstar -> 0
save and activate profile.
restart sap server.
now login with SAP* and password
regards,
kaushal

Running "Flex test drive" - Got error while attempting to connect to data service

Hi,
I'm a Flex / Flash builder beginner. I downloaded the 60 days evaluation, and started to run the "Flex test drive" :
http://www.adobe.com/devnet/flex/testdrive.html
My configuration :
XP SP3 PRO french edition
Tomcat 6.0
My local Eclipse :eclipse-jee-helios-SR2-win32 (but also got the issue on the Flash Builder Eclipse, which version is 3.4.0 (Generation ID M20090211-1700)
Flash Builder 4 with Eclipse plug-in
All on same PC
The Test Drive proposes examples in three technologies : Cold Fusion, PHP and Java. I'm doing the Java examples.
Installation of Flash Builder, as well as step 1 of the Test Drive (Build the user interface) went fine. I could run the project, which at the end of step 1 correctly displayed the UI in my browser.
Only one problem, I don't know if it is relevant for the rest of this post : I first got an error, saying that ports 8080, 8005 and 8009, requested by Tomcat, where used. After a short Google search, I fixed it by changing these ports to 8081, 8006, and 8010, in the Tomcat 6.0\conf\server.xml file.
The Test drive second step is "Connect to data". I found some discrepancies between the Test Drive doc, and what is displayed in Flash Builder. The Test Drive says :
"Use the Data menu and the Service Wizard to create a service for your application server. For ColdFusion and Java, specify the service file you put on your application server earlier (see Figure 9 for a PHP example). For Java, select the No password required check box, select the employeeService destination, and change the service package to services.employeeservice."
--> But there is no "No password required check box".
Also, when running the "Connect to data/service..." wizard, it was not at first completely clear what to choose. The proposed choices were :
BlazeDS
ColdFusion
HTTP
LCDS
PHP
Web Service
XML
Since all others choices, when tried, declared to be unconsistent with my project's server type, I finally selected "Web Service".
In the next wizard's form, according to the Test Drive indications, I specified the URI of my EmployeeService class : C:\Program Files\Apache Software Foundation\Tomcat 6.0\webapps\testdrive\WEB-INF\classes\services\EmployeeService.class
That defined correctly the other fields.
But when pressing the "Next >" button, Flash Builder issued the following error message :
English translation : Unable to extract operations and entities from specified WSDL. Reason : an error occured while instrospecting the service.
And the full error text is :
An error occured while instrospecting the service. WSDLException: faultCode=PARSER_ERROR: Problem parsing 'file:/C:/Program%20Files/Apache%20Software%20Foundation/Tomcat%206.0/webapps/testdrive/W EB-INF/classes/services/EmployeeService.class'.: com.sun.org.apache.xerces.internal.impl.io.MalformedByteSequenceException: Invalid byte 2 of 2-byte UTF-8 sequence.
It is usually relatively easy to find fixes through Google searches, but this time, it didn't work. So here I am, expecting a bunch of wise answers from all the nice Flex / FB gurus that I'm sure haunt this forum .
Thanks and best regards.
Marc.

For those who would have the same problem, here is how I could eventually fix it.
Since the Flex Test Drive is sometimes out of sync with flash builder 4, I recreated a project using other help pages on Adobe site :
Entry point :
http://help.adobe.com/en_US/Flex/4.0/AccessingData/WSbde04e3d3e6474c4-668f02f4120d422cf08- 7ffd.html
As suggested, I used the New Project wizard to create a new project, with :
Application server type : J2EE
Check the radio button "Use remote object access service : BlazeDS"
Then, as indicated in following pages (section "Accessing BlazeDS")... :
file:///C:/Mes%20documents%20C/Commun/Developpement/Documentation/HT-Tracks/AccessingData/ help.adobe.com/en_US/Flex/4.0/AccessingData/WSbde04e3d3e6474c4-668f02f4120d422cf08-7ffe.ht ml#WSbde04e3d3e6474c4-19a3f0e0122be55e1b7-8000
...I selected the "Data / Connect to Data/Services..." menu option, which started the Data/service connection wizard.
There, I selected a BlazeDS (and not Web Services) service type, and everything went fine.
Suggestion to adobe staff : maybe it would be useful to update the Flex Test Drive to reflect Flash Builder 4 ?
Very nice product anyway, so far, congratulations...
Rgds
Marc.

Why the LDAP server does not accept any connection upon the installation of iPlanet Application Server Enterprise Edition 6.0 Test Drive Phase II

"I am carrying my tests under W2000 with all the default installation options. I've checked the user ID (admin), password and port are correct. However, I was not able to start the Netscape Console and also, the kregedit exited with messages:
Could not connect to LDAP server on cr7260et017 port 389 as user cn=Directory Manager: Can't contact LDAP server
GXBindInit: GXBindBasic failed
GXContextInit: GXBindInit failed 2
[18/Jan/2002 13:56:48:3] error: ENGINE-context_init_failed: EngineClassSpace ContextModule.createContextInit failed:
error: could not get context
*** Errors in initialization from registry ***
Errors in initialization, exiting ..."
(previously submitted to Portal Services/Wireless)

Hi,
I'm not sure if there are known issues with iAS test drive and Windows 2000 howevere I would like to help you in cracking the error.
The GXBIND error appears only when the iAS is not able to communicate with the directory server. In our case, let us proceed by the following...
1. Check if the directory server is running. Verify this by checking the services and look for an entry for directory server and it must look something like
"Netscape Directory Server 4.1 (machine name)" and the status is started.
2. Next, if you are not able to start the console of directory server, then you must check if the directory administrative server is running. This is also verified with the services and look for the entry...
"Netscape Administration Server 4.2" and the status is started.
3. Next, if both of the above are running, then you need to login to directory server console by using cn=Directory Server and issuing the password. If you are able to login successfully then, iAS will work, if not, then rectify the problem with directory server and I'm sure iAS will work.
4. If you have forgotten the password for cn=Directory Manager, then there is a work around for fixing the password in directory server and iAS.
Please let the outcome once you have done this.
Regards
Raj

How to create a new connection from SAPGUI to Test drive?

Hi,
I have installed Sap Netweaver Test drive on a linux virtual machine (windows host). The installation was successful and I was able to start the instance (application server and the database), yet I don't know how to create a new connection from my SAPGUI client (7.20) to this server. The static IP address of the server is 192.168.1.160.
I entered the following values for my new connection entry
Description: SAP Netweaver
Application server: 192.168.1.160
Instance number: 01
System ID: DB2
SAProuter: /H/192.168.1.160/S/3201/H/
But it does not work. Any idea about the values needed for creating a new entry?
Thanks in advance,
Dariyoosh

>
Dibya R Das wrote:
> Why are you entering a router string? Can't you reach a box directly from your machine?
>
> Doesn't a ping to that host & a "telnet <host/ip address> 3201" work from your machine to the SAP System.
>
> Remove the router string you wont need if the above works.
>
> - Regards, Dibya
Hello there,
Thank you very much for your answer which solved my problem. In fact there was no need of providing router string.
Kind Regards,
Dariyoosh

New Mac Mini + Office 2004 Test Drive

Hi everyone. Not sure if this is the correct place to post this question, but I'll give it a shot...
I bought a new Mac Mini a few weeks ago. I just downloaded a Word document from my e-mail and it opened up Office 2004 Test Drive automatically... I agreed to the User Agreement, opened up my Word document, yada yada...
Now, however, it bugs me that this is trial software and I have 30 days to evaluate it. Thing is I actually own Office 2004 and just never got around to installing it on my Mac Mini yet...
So what is the proper way to install it? Do I need to remove Office Test Drive 2004 first, or do I just run the installer off the Office 2004 DVD? What are the proper steps I need to take?
Thank you,
Keith

Remove MS Office Test Drive
On your hard disk, open Microsoft Office 2004 folder that contains the Test Drive. Any documents you saved in the Microsoft Office 2004 Test Drive should be moved somewhere in your documents folder.
In the Microsoft Office 2004 folder, double-click "Remove Office". In the Results window, choose Microsoft Office 2004 (including Test Drive) and then click "continue" and follow the prompts.
http://www.microsoft.com/mac/default.aspx?pid=office2004td
-mj
[email protected]

Problem Installing ABAP Engine of SAP WAS 6.20(TEST DRIVE VERSION)

Hi
I am trying to install ABAP Engine of SAP WAS 6.20(TEST DRIVE VERSION) which I got with the official ABAP Reference book of SAP press.
It is installing upto 91% and giving the following errors:
RC code form SyCoprocessWait = -2 .
Error: DBR3LICENSECREATE ExecuteCheck 2 718
Exit code from C:\MiniWAS\saplicense: -2.
Error: DBR3LICENSECREATE InternalInstallationDo 2 718
Phase failed.
Error: DBR3LICENSECREATE InstallationDo 2 718
Phase failed.
Error: Main {} 2 718
Installation aborted.
I am trying to learn ABAP and need to practise it. Could someone please help me in this matter.

Restart the install and search this forum for "MiniWAS", "Mini Was", "620 install" and you'll find half a dozen people who had the same problem.

Office Test Drive is a pain

Bought new MacBook - great!
FireWire all my work and applications from iMac - great!
Start using Office (purchased 2yrs ago) and Test Drive wants me to buy again - not so great!
Removed Test Drive using "Remove" application residing in Test Drive folder and change all my files in "Get info" to open using my original version of Office but get error 10660. Now all my existing and new files will not open and come up with error 10660. The only way to open them is to change "open with" in "Get info" on every single file
(this is 100s) even although I changed "open with" to "chnage all". When I go to the "open with" menu I can still see the old version of Test Drive as default even although I used the remove application - pain in the **
This is another case of Microsoft trying to take over the world. Why has Apple allowed this?
Any suggestions would be very welcome.
thx
MacBook Mac OS X (10.4.8)

I didn't install Office just used the FireWire cable to transfer. Surely this is the whole idea that you don't need to install your exisiting software again! It was a couple of days before I realised that Test Drive had taken control of my computer.
Thanks for your comments anyway but I still think Apple should re-think pre-loading Test Drive. It has and will cost me time to put it right. Who do you think I should send the bill to?
Ok I've stopped moaning now!
Thanks again
MacBook Mac OS X (10.4.8)

Office Test Drive: relaunching the initial Entourage setup?

I have been playing about with the Office Test Drive--does anyone know how to run the initial setup that Entourage performs on its first launch, again? I was testing the import of an old database; now that I see it works well I want to trash that database and rerun the initial setup again, but there is no option to do so that I can find.
1. "Import" does not work as it won't allow me to select from the Office Identities or Main Identity or Database folder/files. (I want to do this from a backup of the database and not from a program itself. This worked on the initial setup but does not seem to want to work in the "Import" command.)
2. I cannot seem to trash the old identity; when I drag it to the trash it goes into the trash but the trash will not allow me to empty it as it says the Database is in use.
3. Holding down the option key upon launching Entourage worked once--it went to launch Database Utility but quit unexpectedly, and when I launched Entourage it was wiped clean and gave me the "new import" option, but I wasn't prepared to install the new database at that moment and now launching Entourage again does not give me that option. Also, when I have tried that trick again--holding down the option key during the lauch of Entourage--Database Utility launches correctly now! It does not "wipe clean" the program this time.
Should I delete the Office Test Drive and reinstall a new copy? I found it on Mactopia; I'm just worried that the computer will detect that I'm reinstalling Test Drive and refuse to allow it. (I still have 30 days left of the Test Drive as it stands now.)
Any other suggestions?

It doesn't make sense to me that you would have a
problem like this. I have bought 2 iMacs this year.
One of them was about 7 weeks old when I got it and
my installation of the test drive worked just fine.
Bought a 3 month old e Mac last year and used the
test drive for 30 days while awaiting delivery of my
full version of Office.
It has nothing to do with the date the software was
installed but from the date it was first opened.
Wierd problem. Did you buy this Mac new?
yes brand new, from the apple store online at apple.com,, I talked to some guy on the apple help chat thing and he said my machine was manufactured on 10/22/05 I ordered it 11/28/05. Anyway I did trash it lastnight and am going to try and reinstall it it. The tech suggested it then he said he didnt think it would work lol. I also downloaded the program suggested and it works well also.. so either way Im covered now.

Office test drive expires b4 30 days...

i juz purchased macbookpro in early april. it comes with the office 2004 test drive, and i'm supposed to be able to use it for 30 days. but as i've changed the clock once by accident, it expires right away!! no matter how many times i reset the clock in system preferences, it juz doesn't help...
and, i find out that i can't even transfer the excel file back to my PC to edit...seems that the file is somehow "locked" when the office expires. when i transfer the excel to my PC, it changes to 1k, and simply can't be opened.
is there anyway i can set back the expiry date to a correct one?!? it's kindda urgent... i juz need more time b4 i can purchase an official copy...million thanx!!
macbookpro Mac OS X (10.4.6)

hi barry~
thx for replying!
i think it's not solely a problem with Microsoft..
as the same thing happens for adobe photoshop.. =(
i downloaded the tryout version yesterday, and it expires today...
i think it's bcoz of the system clock..
aniDa

Microsoft office test drive expired new PowerBook, help

hi. I don't know where else to ask this question. I have had my PowerBook for about 6 hours and I am already frustrated ... I tired to use the Microsoft Office Test Drive that is on the machine only to have it tell me that my 30 day trial has expired. How can it be expired when the PowerBook has only been used for less than 6 hours and Office for the install only? Any suggestions on how to get this to work? Or who to complain to? To Apple? It is almost impossible to complain to Microsoft or to get an answer from them.
I have purchased a copy of Microsoft Office but it hasn't shown up yet.
Thanks for the help.
Paloma

Hi, PalomaMouse, et al. - There is a new KBase article containing the solution to this issue, here:
http://docs.info.apple.com/article.html?artnum=302930
Tuttle
1460/8168

Microsoft office test drive - Expired??

Hi there. I bought an emac about 2 months ago, and it had 'microsoft office 2004 for mac test drive' which is supposed to be a 30 day free test drive. But as soon as i tried to open it it said it had expired!
I rang up the store and the lady said to drag it to the trash, then re-install it by using my grey 'Mac OS X install Disc'
But when i use the disk and go to 'Optional Installs' i get to the 'custom install' page and there is no 'microsoft office test drive' to tick. under applications it only has iLife, iTunes and about 6 others.
Anyone out there who could help me?

You can download MS Office 2004 for Mac Test Drive from the MS website, also. Here is the link:
MS Office 2004 for Mac Test Drive Download
iMac Intel Core Duo 20", 1.5 GB RAM, LaCie 200 GB FW HD Mac OS X (10.4.4) eMac 1.42GHz, 1 GB RAM, 160 GB HD, SD; iPod w/ video 30 GB

Microsoft Office 2004 Test Drive Question

Hello all,
Please forgive me if this is the wrong forum, but I'm looking for help here... or possibly somebody has a forum elsewhere where I might ask this question:
I have recently purchased a brand new Macbook Pro.
I installed Office 2004 (Student/Teacher Edition).
When I double-click on a document created by Word (from my PC that I transferred over), instead of my "real" Word 2004 opening the document... I get the Office 2004 Test Drive opening it...and a warning saying "I have 29 days remaining until it expires".
My question is: How can I either remove the Office 2004 Test Drive and/or get it so that my document is opened with the "real" Office, instead of the test drive?
As I said, I apologize if this is the wrong forum... but if you can please a) direct me to the correct forum or b) help me out with a link... I'd VERY much appreciate it.
Thanks very much!
Macbook Pro Mac OS X (10.4.8)

If you installed (used) the Trial version of Office then merely dragging the folder to the Trash won't do the trick. You will instead have to run the Office Uninstaller (in the /Office 2004/Additional Tools/Remove Office/ folder) and completely remove both the Trial and the licensed version of Office including preferences. Then reinstall your licensed version. This is the only sure way of avoiding any conflicts between the two versions.
You were obviously pleased with the help provided by the other poster. Consider rewarding his/her effort:
Why reward points?(Quoted from Discussions Terms of Use.)
The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

Microsoft office for mac test drive

Hi i've just gotten a macbook and have some problems with running microsoft office.
I have the previous 2004 version (11.0) but for some reason, it won't use that as default, and i can't remove the new version (test drive) w/o removing the old one at the same time.
I don't want to have to pay for the new one if i can avoid it. Can somebody tell me what can I do?

Glad to help.
Why reward points?(Quoted from Discussions Terms of Use.)
The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

Microsoft Office - Test Drive Complete

I bought a new G5 and sync'd it w/ my old iBook. I purchased Microsoft Office Suite for that computer and now it won't run on my new system. Can someone help me figure out why.

I bought a new G5 and sync'd it w/ my old iBook. I
purchased Microsoft Office Suite for that computer
and now it won't run on my new system. Can someone
help me figure out why.
You need to remove the Test Drive (which may have been copied over) before installing the full version.
Make sure you are logged on as an administrator.
Quit any Microsoft Office programs that are running.
In the Finder, click Applications, double-click the Microsoft Office 2004 folder, and then double-click the Remove Test Drive icon.
Click Remove.
iFelix

Test Drive DBADMIN password

Similar Messages

Maybe you are looking for