Test in AL 11 folder

Hi
I am doing a File to File test scenario. I do not have a file access. Can I place the target file in my desktop? How do I do that ? Or can I creata a folder in XI in AL 11 , place there and check the file
It would be helpful before I actually place the file in the target MDM server
Regards

Shabarish,
Your blog, as always, is wonderful and I am sure I will use it on my laptop. I cannot download exe files on my office machine and I don't have the previleges to do that.
Raj
I am getting an error Transaction CG3Z does not exist. Same the case with CG3Y also.
I searched sdn and got this information.
T-code CG3Z can be used to upload files from ECC system (assuming the ECC and SAP PI directories are mounted / shared).
It won't work from PI abap stack.
How do I check ECC and SAP PI directories are mounted or shared ?
Regards

Similar Messages

Two or more 'testing' sites in htdocs folder- conflict?

In managing a cs5 testing environment, I am prompted that my 'php_test' site in xampp/htdocs may conflict with the site I set up for editing a wordpress site, since they both share the same root folder -htdocs. What is the best practice for getting around this? I saw something mentioned about 'virtual hosts', or is there a simpler way while testing?
Thanks for your help.

I prefer to keep my sites in separate folders
xamp/htdocs/sitename1/
xamp/htdocs/sitename2/
xamp/htdocs/sitename3/wp/
Nancy O.

Limit to number of tests and learning objects in a Content folder in OLM

All,
Before I ask my question I want to preference a few things:
1. My company has been using OLM for approximately 2 years.
2. For the most part we use OLM to track compliance, meaning that we use Online tests to track compliance to specific company standard operating procedures. Which as you can imagine is a lot of documents.
So, with this is mind. We setup a course, offiering (with associated test) and class to determine if an employee has completed reviewing the changes to a document, as each document revises.
Now to my question...
Today we noticed that some of the tests for this compliance process in OLM were not being displayed. All of the tests exist in their own folder for this process. Note: There is a single content folder on the content tab of OLM for all of these tests. And when we check the count from the front end we see that there are 1001 displayed from the dministrator front end of OLM.
However, some of these are not listed here. Even eif you click next all the way to item (test) number 1001.
So, Is there a limit to the number of test or learning objects that can exist in a content folder in OLM?
If so what is this limit? Is it 1000? 1001?
My understanding is that you cannot move a test in the content hierarchy, if it is bound to a folder or even a parent learning oject it forever stays there. And you cannot delete it once it has attempts against it.
So where does this leave us... We know that some of the tests in this content folder are missing because our catalog has less items in the same associated folder. In other words we have better organization in the catalog (for courses, offering and classess, because each course has its own folder. So if we go to a known missing Offering we can determine the learning object / test associated with it. If we copy the name of this test and search for it on the Content tab it is in fact found.
So we know it is there and we know that people have competed it as a result of the status of the enrollment, yet we cannot go to it on the Content tab.
This leaves me baffled.
Is there any way that we can get to these from the Administrator Front end? Can we move them on the back end?
Any help anyone can provide is sincerely appreciated. I am doing a deep dive with my IT staff on this next week to come to some resolution on this, because we have had to halt our process until we have a resolution.
Thanks for your help!
Brian Urbanek - Luminex Corporation Training Operations Manager

Hey Brian,
I believe you should be able to personalize the number of rows displayed to overcome the pre-defined limit.
Or check this thread, it might help.
How to remove the limitation on no. of rows
Hope all is well,
Scott
http://www.seertechsolutions.com

Can't find contents of duplicated folder

Yesterday I moved a folder, that contained a bunch of other that was in my old secretary's "Drop Box" into my new secretary's account on the same computer. I then realized that my old secretary, who is still working part-time, probably wants some of that back in her folder so I duplicated the whole folder and moved the copy back to her account. So far so good.
Today we went to get a document out of one of the folders but nothing was there. Other folders their documents in them but some did not. The ones that showed nothing had a little down-arrow on the lower right corner of the folder icon which I think signifies a drop folder. We went back to the other account, looked up same folder and had same result-nothing shows. I've tried changing the permissions on the folder but that does not seem to help. I'm pretty sure the data is still there. We just can't see it.
Does anybody know how to open this up?

I suspect it is still a permissions problem: a drop box has Access of "Write Only" for the group and all others, except the actual owner of the folder. When you changed the permissions, did you try changing the access on Group and Others to Read and Write? Afraid I don't use the drop boxes very much, but I did just try a little experiment: copied a folder from my account into the Drop Box of my test account, and I got a little warning that I would not be able to see the results of this, said OK. I then used a sudo command in Terminal and could indeed get a list of all the files in the test account's new folder. My test account is named "revelator" and the folder I copied to the Drop Box was named "links"--this is what the Terminal list command looked like:
Tigin:~ francine$ sudo ls -al /Users/revelator/Public/Drop\ Box/links
I hit Return, entered my admin password, and got a list of all the files and sub-folders in the "links" folder.
I then logged into the revelator account, the folder was in the Drop Box, I could access it and its sub-folders, but, of course, everything was Read Only because the owner of the folder and its files is still me.
You can use Terminal to keep burrowing down to see if the files are still there. Thus, there is a sub-folder in the links folder called "html" and to see its contents using the Terminal list command, it would look like this:
Tigin:~ francine$ sudo ls -al /Users/revelator/Public/Drop\ Box/links/html
If all the files are intact I would think tinkering some more with the permissions on the sub-folders that are showing as drop boxes should fix things.
Francine
Francine
Schwieder

How do I set up a local testing server?

Hey again everyone. I am trying to figure out how to set up a local testing server. I've read a couple different tutorials online and i still can't figure it out. I added a new server, named it test server, I'm connecting using local/network, my server folder is C:\Users\Jake\Website\testfolder, and my web URL is http://localhost/. My server model is PHP/MySQL.
My site's root folder is C:\Users\Jake\Website\. I have also downloaded XXAMP. It downloaded and that was it though, I'm not sure if I need to apply it somehow to Dreamweaver. When I try to preview my pages I get a message that asks me if I want to update copy on testing server. If I choose yes, another message comes up and asks me if I want to put dependent files. Whether I choose yes or no it just says IE cannot display the web page.
Any help would be appreciated, thanks!

Site Name: PHP Test Site
Local Site Folder: C:\xampp\htdocs\php_test\
Server Name: Local Testing
Connect Using: Local/Network
Server Folder: C:\xampp\htdocs\php_test
Default Images Folder: C:\xampp\htdocs\php_test\Images\
Web URL: http://localhost/php_test/Server Model: PHP MySQL
Is that everything you need to know? Note that I do not have a remote testing site set up yet.

Test-path where a directory in the path is variable

My company has a series of fax lines and associated file shares. Faxes are processed & then dropped off into these file shares. From that point a service runs about every 60 seconds to look for files in these directories to import into a database.
If there is a problem with the import then the service moves the file to a "HOLD" folder & files remain there until human intervention.
I am trying to create a script that will find the HOLD directory in each of these folders and look for the existence of files, then email a group of users alerting them if there are.
So there are several things I'm trying to accomplish.
1. Look for files in a path where a folder in the middle of the path is variable.
2. Send and email that will inform the recipient that there are files in the HOLD folder(s) and tell them WHICH ones
Here's what I am starting with but it isn't working as expected. There are files in at least one of these. I also thought to try using some kind of foreach loop but it's eluding me. Probably because it's late in the day for me.
$folder = get-content -Path "\\child.domain.com\netlogon\scripts\ps\numbers.txt"
if(Test-Path -Path "\\Server\scan import\fax\$folder\Hold" -include *.pdf, *.tif, *.jpg) {write-host "Files exist at $folder"} Else {write-host "No files in the hold folders"}
# When I wrote this script only God and I knew what I was doing. # Now, only God Knows!

The numbers.txt includes a list of folder names, one per line. I did come up with the following and it's working, for my purposes, so I now need to figure out how to get the results into the body of a single email.
$parent = "\\server\scan import\fax\"
$folders = get-content -Path "\\child.domain.com\netlogon\scripts\ps\numbers.txt"
Foreach ($folder in $folders)
if(Test-Path -Path "$parent$folder\HOLD\*" -PathType leaf)
write-host "Files exist at $parent$folder\Hold"
Else
write-host "$folder Clear"
I'm really only using the Write-Host actions in place of the Send-MailMessage Cmdlet, at least I think that is the command I need.
# When I wrote this script only God and I knew what I was doing. # Now, only God Knows!

Folder action to find and replace text and change line feeds

I want to use a folder action to find and replace text and change Mac carriage returns to DOS line feeds inside text files.
The text to be replaced is: "/Users/wim/Music/iTunes/iTunes Music/Music" (without the quotes)
This text has to be removed (i.e. replaced by an empty string)
The text occurs many times within each file.
The files are playlists exported from iTunes in the M3U format (which are text files). They contain Mac carriage returns. These need to be changed to DOS line feeds.
I have found the following two perl commands to achieve this:
To find and replace text: perl -pi -w -e 's/THIS/THAT/g;' *.txt
To change carriage returns to line feeds: perl -i -pe 's/\015/\015\012/g' mac-file
I know that it's possible to make a folder action with Automator that executes a shell script.
What I want to do is drop the exported playlists in M3U format in a folder so that the folder action will remove the right text and change the carriage returns.
My questions are:
Is it possible to make a folder action that executes command line commands instead of shell scripts?
What is the correct syntax for the two commands when used in a folder action shell script? Especially, how do I escape the slashes (/) in the string to be removed?
Thanks for your help

Ok, I've include an applescript to run a shell command. The applesript command quoted form makes a string that will end up as a single string on the bash command line. Depending on what you want to do, you may need multiple string on the bash command lines. I've included some information on folder actions.
It is easier to diagnose problems with debug information. I suggest adding log statements to your script to see what is going on. Here is an example.
    Author: rccharles
    For testing, run in the Script Editor.
      1) Click on the Event Log tab to see the output from the log statement
      2) Click on Run
    For running shell commands see:
    http://developer.apple.com/mac/library/technotes/tn2002/tn2065.html
on run
    -- Write a message into the event log.
    log " --- Starting on " & ((current date) as string) & " --- "
    -- debug lines
    set desktopPath to (path to desktop) as string
    log "desktopPath = " & desktopPath
    set unixDesktopPath to POSIX path of desktopPath
    log "unixDesktopPath = " & unixDesktopPath
    set quotedUnixDesktopPath to quoted form of unixDesktopPath
    log "quoted form is " & quotedUnixDesktopPath
    try
        set fromUnix to do shell script "ls -l " & quotedUnixDesktopPath
        display dialog "ls -l of " & quotedUnixDesktopPath & return & fromUnix
    on error errMsg
        log "ls -l error..." & errMsg
    end try
end run
How to set up a folder action.
1) right click on folder. click on Enable folder actions
2) Place script in
/Library/Scripts/Folder Actions Scripts
3) right click on folder. click on attach folder action
pick your script.
Create a new folder on the desktop & try.
You can put multiple folder actions on a folder. There are other ways of doing this.
Here is my test script:
on adding folder items to this_folder after receiving dropped_items
    repeat with dropped_item_ref in dropped_items
       display dialog "dropped files is " & dropped_item_ref & " on folder " & this_folder
    end repeat
end adding folder items to
How to make the text into an AppleScript program.
Start the AppleScript Editor
/Applications/AppleScript/Script Editor.app
In Snow Leopard it's at: /Applications/Utilities/AppleScript Editor
Copy the script text to the Applescript editor.
Note: The ¬ is typed as option+return. ption+return is the Applescript line continuation characters.
You may need to retype these characters.
Save the text to a file as an script and do not check any of the boxes below.

How to create the folder in LabVIEW 7.1?

Dear All,
I need to create the folder in LabVIEW 7.1?.. Then if the folder exsists i need to ceate the new folder with the file name by increate by nemerical number by 1. As well as i need write the data's which i acquired in sepeate test file within that folder itseif. If the file name already exsists i need to create the same file name by increatemet by one in numerical no 1. Any one help to solve this issue?
Regards,
Srinivasan.P

You've asked this question before, and so far have shown nothing to indicate that you've made any attempt to solve the problem by using the tools available to you. Like the functions palette. Or the search tool, since this question has been asked many times before.
Have you looked in the File I/O palette? There's the New Directory function for creating directories. There the File/Directory Info function that can be used to check if the folder exists (call the function, and if you get error 7 you know the folder doesn't exist). You can also use List Directory on the parent directory.
Make an effort.

"Save As" Folder pathname in action not stable

I am facing a problem with an action that used to work in the past before I moved to a Mac and PS CC.
Basically, my action processes a pciture in different ways and saves each version in different folders within a main folder on the desktop. The action works fine but as soon as I rename or delete the main folder, the change is reflected in the action which forces me to re-record the "save as" parts of it. I would like to use the same folder structure since I have duplicates of it.
I tried everything and searched everywhere but no answer. Is it something new in PS CC or specific to the Mac OS (Maverick)?
Thank you
Frederic Neema

Thank you, that could be a solution but I have several workflows that need to save to different folders. I'd like to understand why this is hapenning in PS CC while it is working fine with PS CS5 and OS 10.8 or windows 7. Bug?
Anyway, here is test action to explain better what's going on.
Here is my test action with a folder "test" on the desktop. It has two sub-folders, "psd" and "jpg"
Now, here what happens when I rename the folder “test” to “test 2”. The action now shows test 2. It happens even if I close PS before renaming the file.

Testing SWF with external XML file, strange problem.

Hi!
My problem started after migration to 2.01. But I think it's
not version problem.
I have old project which uses external XML files ("
http://www.mydomain.com/myxml.xml").
When I teste project in "bin" folder it works perfect and SWF
import data from XML.
I created new Flex project and copied all scripts from old
one. And my new app can't read external XML!!! (tested in "bin"
folder):
*** Security Sandbox Violation ***
Connection to xmlURL halted - not permitted from
file:///C:/myproject/bin/myproject-debug.swf
BUT when I copy my new SWF to the old project "bin" folder
then it WORKS! Strange!
I found in Help "The Global Flash Player Trust directory" and
I checked files: "flexbuilder.cfg", "flexbuilder.fbr" there are all
my project paths (old and new).
Thanks for help!
newman

You should your homework with Google and other search engines
better ;)
http://www.robrusher.com/1/2006/08/Flex-2-Error-with-XML.cfm

Unit Test Framework Crashing LabVIEW Project

[Cross posted to LAVA]
OS: Windows 7
LabVIEW 2009, LabVIEW 2009 SP1.
Howdy
If I create a project and add a VI and a unit test to it and save it, then delete the unit test, everything works.
If I do the above but put the unit test in a virtual folder then delete it, the project hangs and LabVIEW crashes.
I have tried this on multiple computers and get the same effect.
If it is an issue I thought this may have been fixed in 2009 SP1, but it is not.
I do not remember this happening in 8.6.1 but I was using VISTA at the time (if that is related?)
I get the same problem if I open an existing project with unit tests in it.
Additionally I have noticed that the files from the unit test in Windows 7 have no "logo/icon" associated with them. I thought in VISTA they had the same icon as what is shown in the project - the green plus sign (but this was a while ago).
Is this a known issue / can anyone else confirm this?
Cheers
-JG
Message Edited by jg-code on 04-13-2010 10:02 PM
Certified LabVIEW Architect * LabVIEW Champion

Hi Kyle
Thank you for your quick reply.
I am having this problem on my work PC, home PC and a colleague's PC all running Windows 7 and 2009 SP1.
I have found the problem occurs if I create a new unit test OR drag and drop an existing unit test into the project.
Attached is a (jing) video of what is happening every time.
You will see that at the root level of the project (My Computer), I can remove the unit test with no problems at all.
But if it goes into a virtual folder and I try to remove it - then LabVIEW crashes.
The attachment is in LV2009.SP1 and is the sane project as used in the video.
I look forward to your feedback on resolving this issue I am having.
Cheers
-JG
Certified LabVIEW Architect * LabVIEW Champion
Attachments:
Test Project.zip ‏4 KB

Delete folder in a particular scenario using batch file

How to achieve this using a batch file?
The batch file should check if inside this folder "c:\test\", a directory named "temp1" only is present. If so then delete the folder test, but if the folder test contains more directories and files other than "temp1" directory, then just remove the "temp1" directory alone.
Regards,
Mathan

First, why are you asking about this in a LabVIEW forum? I would suggest starting with Google.
Second, you could simplify your algorithm by deleting temp1 and then checking if the test dir is empty or not. The Windows command is rd, if memory serves, but I believe that doesn't work on non-empty directories, so you might need to add switches to it or use another command. You could probably even simplify it by trying to delete test and letting it fail, so something like this:
del c:\test\temp1\*.* (add switch for quiet mode).
rd c:\test\temp1 (and check if there is a recursive switch)
rd c:\test (should fail if not empty).
Try to take over the world!

Test GUI Exception----help!!!!!!!!!!!!!!!!

I run the junit test case from dos after typing
"java junit.swingui.TestRunner MoneyTest"
Before running the test case in the junit sample fold, i set the Classpath which include one fold named "test", then i copy the sample of MoneyTest into this fold to try Junit, but the result is :
GUI appears and i also can use the Test Selector search all the Test Cases from the fold "test" ,but in Dos window shows following Exception: (GUI of course can not run)
Exception in thread "main" java.lang.NoClassDefFoundError: MoneyTest (wrong name
: junit/samples/money/MoneyTest)
at java.lang.ClassLoader.defineClass1(Native Method)
at java.lang.ClassLoader.defineClass(Unknown Source)
at java.lang.ClassLoader.defineClass(Unknown Source)
at junit.runner.TestCaseClassLoader.loadClass(TestCaseClassLoader.java:1
04)
at junit.runner.ReloadingTestSuiteLoader.load(ReloadingTestSuiteLoader.j
ava:9)
at junit.runner.BaseTestRunner.loadSuiteClass(BaseTestRunner.java:193)
at junit.runner.BaseTestRunner.getTest(BaseTestRunner.java:86)
at junit.swingui.TestRunner.runSuite(TestRunner.java:591)
at junit.swingui.TestRunner.start(TestRunner.java:708)
at junit.swingui.TestRunner.main(TestRunner.java:52)
Exception in thread "AWT-EventQueue-0" java.lang.NoClassDefFoundError: MoneyTest
(wrong name: junit/samples/money/MoneyTest)
at java.lang.ClassLoader.defineClass1(Native Method)
at java.lang.ClassLoader.defineClass(Unknown Source)
at java.lang.ClassLoader.defineClass(Unknown Source)
at junit.runner.TestCaseClassLoader.loadClass(TestCaseClassLoader.java:1
04)
at junit.runner.ReloadingTestSuiteLoader.load(ReloadingTestSuiteLoader.j
ava:9)
at junit.runner.BaseTestRunner.loadSuiteClass(BaseTestRunner.java:193)
at junit.runner.BaseTestRunner.getTest(BaseTestRunner.java:86)
at junit.swingui.TestRunner.runSuite(TestRunner.java:591)
at junit.swingui.TestRunner$9.actionPerformed(TestRunner.java:283)
at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
at javax.swing.AbstractButton$Handler.actionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(Unknown Sour
ce)
at java.awt.Component.processMouseEvent(Unknown Source)
at javax.swing.JComponent.processMouseEvent(Unknown Source)
at java.awt.Component.processEvent(Unknown Source)
at java.awt.Container.processEvent(Unknown Source)
at java.awt.Component.dispatchEventImpl(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Window.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source)
I dont know where problems happened??? Thank you for any help!!!!
Alonso

I run the junit test case from dos after typing
"java junit.swingui.TestRunner MoneyTest"
Exception in thread "main"
java.lang.NoClassDefFoundError: MoneyTest (wrong
name
: junit/samples/money/MoneyTest)
I dont know where problems happened??? Thank you for
any help!!!!See the part in the exception about where is says "wrong name"?
It means you used the wrong name (surprising how that works.)
See the section after it where is says "junit/samples/money/MoneyTest"?
That tells you that it couldn't find the name that you gave it, but that it did find a name called junit.samples.money.MoneyTest.
It is up to you to figure out if you really wanted to use junit.samples.money.MoneyTest or if you made a mistake in something else.

Pass login credentials into a test-path cmdlet

Here is the scenario. I'm creating a SQL Server Job that will use Powershell to test if a session could be made to a remote server before creating one. I was able to successfully create a cmdlet that will test a path that connects to a remote shared server
on the same domain. The remote server I'm trying to connect to is on a different domain so I need to pass along the login credentials. I'm stuck in finding the correct way to perform this. Is there a way to pass the login information without a prompt? Below
is my test-path command I want to use.
If(Test-Path -path \\IPADDRESS\Folder\subfolder)
   write-error "Remote connection test passed successfully"
else {Write-Error "Could not connect successfully to "\\IPADDRESS\Folder\subfolder" -EA Stop}
Also I was trying to use PSCredential to achieve this but was unsuccessful and received an error. Below is the powershell commands and error message.
$SecurePassword = Read-Host -Prompt "Enter password" -AsSecureString
$UserName = "DOMAIN\User"
$Credentials = New-Object System.Management.Automation.PSCredential -ArgumentList $UserName, $SecurePassword
PS C:\Windows\system32> If(Test-Path -path \\IPADDRESS\Folder\subfolder $Credentials)
>>   {
>>
>>     write-error "Remote connection test passed successfully"
>>
>>
>>   }
>> else {Write-Error "Could not connect successfully to "\\IPADDRESS\Folder\subfolder" -EA
Stop}
>>
Test-Path : A positional parameter cannot be found that accepts argument 'System.Management.Automation.PSCredential'.
At line:1 char:14
+ If(Test-Path <<<< -path \\IPADDRESS\Folder\subfolder $Credentials)
    + CategoryInfo          : InvalidArgument: (:) [Test-Path], ParameterBindingException
    + FullyQualifiedErrorId : PositionalParameterNotFound,Microsoft.PowerShell.Commands.TestPathCommand
Thank you in advance

Hi DBA_attack,
Thanks for your posting.
If there also occurred error after add the parameter -Credential, please also note: This parameter -Credential in test-path is not supported by any providers installed with Windows PowerShell.
You can also try to use Invoke-Command with the credential who has the permission to access the tested file path.
I hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Robocopy on Windows Server 2008 SP2 does not copy folder permissions

When using Robocopy to copy folders and files from one local hard disk to another, using /COPYALL /E /TEE options, the target folder does not contain the source folder's ACL. I've tried other options such as: /COPY:DATSOU or /SECFIX, it made no difference.
Test scenario: Create a folder on C:, Test1. Add to Test1's permissions a local group with Read, e.g. Backup Operators. The ACL list should have permissions inherited from C:\ plus Backup Operators that's not inherited. Use Robocopy to copy Test1 to C:\Test2, check the ACL on Test2. Backup Operators is missing.
It looks like Robocopy cannot override the target folder's permissions inheritance, the folder retains the parent folder's ACL.
I've also disabled User Access Control in troubleshooting this problem.
To add to this issue, there's a workaround can be used to ensure the target folder's ACL is the same as the source folder's ACL. It's a two step process.
1) Use XCOPY source_folder target_folder /I /E /X /T - This lays down the directory structure including the ACLs
2) Use ROBOCOPY source_folder target_folder /COPYALL /SECFIX /E - This will copy over the directories and files, enforcing the files to receive the parent folder's ACL. The target_folder's ACL remain intact, unaltered from XCOPY command.
The end result: the target_folder ACL is identical to the source_folder ACL, the files copied to the target_folder will inherit ACL from their parent folder. Both source and target folders and files ACLs are identical.
ROBOCOPY should do both steps, but doesn't. I've tested this scenario on bare-bones Windows Server 2008, physical and virtual machines.
Darryl Miller

To Wendy23,
Just for clarity, the Windows Server 2008 OS that I ran ROBOCOPY and XCOPY on was the non-R2 version. Microsoft might have fixed this issue in R2.
You'll probably need to logon as local Administrator or use an account belonging to the local Administrators group.
Also, open the Command Prompt using "Run as Administrator" (right-click on Command Prompt), then run the XCOPY and ROBOCOPY commands from within this prompt.
To answer G.Write, the storage is local hard disks.
Thanks, was a long time ago, I was having a problem with robocopy not copying permissions on a SAN, and was wondering if the SAN was the problem, but your method worked fine for me, thanks.

Test in AL 11 folder

Similar Messages

Maybe you are looking for