Test section not appearing

Hi,
I created a questionaire on OLM with multiple test sections. It displays all questions from all Test Sections when I preview it from Oracle Learning Management Administrator.
However, when I play it from Employee Self Service, it does not display the first Test Section that I created...it displays every other Test Section though.
Any idea what could possibly be the cause of this?
Thanks
Shalantha

Hi,
Can you please describe your setup details fo rthe test section I am looking for the values you have used to setup the test section.
Thanks

Similar Messages

RECN: Conditions Tab: Header data for second section not appearing

Hello,
Need your kind advise please. I have entered a contract successfully. The contract type is Pay:Rates Payment. The contract has been successfully saved.
The problem comes when I am trying to display the contract. Here is what's happening sequentially:
Procedure 1
1. I am using TCode RECN and keying in the contract number.
2. Upon pressing Enter, the General Data tab of the contract is opening.
3. I am clicking on the icon to change the status from 'display' to 'change'. The mode successfully becomes the 'change mode'.
4. I am clicking on the Conditions tab and I can see that the screen shows two sections. The top section shows the various conditions that I have created. The bottom section shows the details of the condition for the line item selected from the top section.
5. I am making the necessary changes and successfully saving the changes made to the contract. Then I am pressing F3 and coming back to the main RECN screen.
BUT:
An error occurs when I modify the above procedure slightly.
Procedure 2
1. When I am entering the contract once more, the first screen that is opening is the Conditions tab of the contract (quite naturally as this was the last screen that i used just now).
2. When I am then clicking on the icon to change the status from display to 'change', the system is issuing an error message "Please fill all the mandatory fields".
3. Upon close examination i am finding that in the bottom section of the Conditions Tab (which is supposed to show the details of the condition on which the cursor has been selected in the top section) the field just above the 5 tabs (ie. Condition, Terms, Calculation, Distribution, Memo) is not populating with the name of the condition on which the cursor has been selected in the top section.
4. Since this field is a mandatory field, the system naturally throws the error "fill up all mandatory fields".
The point to be noted is that this field gets perfectly populated when i am following the procedure 1. But in the same contract, this field doesnt get populated and throws the error message when I am following the Procedure 2.
Request you to please help me understand why in the procedure 2, the field is not getting populated.
Regards.

Hello Veman,
Many thanks for the kind response. However in my case the problem is that when I am trying to go into the 'change' mode for an existing record (which has already been once successfully saved), it is STILL throwing the error message 'fill up all mandatory fields'. The only way to come out of the screen is to press the 'cancel' button.
What is even more funny is that when I am trying to enter the contract directly using the menu RE Cntract - Change from the first RECN screen, then there is no problem coming.
My question is WHY is the system throwing that error message when clearly there is no error existing in the record. I believe this will be a programming error. The problem that i am referringto matches very closely to the solution provided vide note number 1291666. The reason why I cant apply this note is because my SAP release is 600 whereas this remedy is for 602, 603 ans 604.
Regards,
Suvarghya Dutta

Retail Folios in Sandbox Testing do not appear.

Hi,
While doing my sandbox testing on my iPad, my free folios appear inside my Development Viewer on Newsstand on my iPad but none of the Retail Folios show up in the same Viewer even though they are published. I have submitted the viewer to Apple Connect and also submitted single issue IAP's and a subscription IAP. Anyone come across this problem before?
Thanks

Turns out the issue was I didnt have any banking, contact and tax information setup in my iTunes Connect account. This is my first paid App so hadnt set these up before. Once I populated my account with this information, hey presto, the Public/Retail folio's appeared in my developer viewer on my iPad.
PS: Thanks to Chris in DPS support for spotting it.

PO bill to address not appearing

Hi,
In one my the user's purchase order when we click on print preview we have a section called please bill to which contains the billing address.
In this case why is the section not appearing? while other sections like vendor ,deliver to appears correctly.
Please advise.

Dear Arnima,
Pls Develop with ABAP er.
Regards...... Sri

Company codes 2200/2220 do not appear in proposal 13.08.2011 TEST; correct

Hi Experts,
When i am running the APP for customers, I got the below error. I have checked the Open items for customer and payment terms are immediate. please Provide the solution at the earliest.
Company codes 2200/2220 do not appear in proposal 13.08.2011 TEST; correct
Message no. FZ003
Diagnosis
No data exists for the specified paying company code 2200 and the specified sending company code 2220 in payment proposal 13.08.2011 TEST.
System Response
The payment proposal cannot be edited.
Procedure
Check the flow trace and payment proposal list in order to determine why the specified company codes are not contained in the proposal.
Thanks, Meena

Ensure that there are no other proposals lying with the same vendors , where in the payment run is not made .
The error that you are experiencing is due to blocking of vendors account as they are blocked in other proposals .
Find out the proposal where in the same vendor is used and in which you have not run the payment run :
1. Either delete that proposal if you dont require it .
2. Do the payment run for the proposal .
After performing any of the above , re run your proposal where error is experienced it will run now .
Cheers ,
Dewang

List teamplate (template created on migrated custom list from SP 2010 to 2013) not appearing in Add an app section in SP 2013

We have migrated from SP 2010 to SP 2013. When we are trying to create list template from the migrated OOB custom list. List template successfully created but it is not appearing in Add an app section in SP 2013.

Please make sure you have activated "Team Collaboration Lists" feature under Site Features. Also check if the template in the list template gallery is published.

Mitigation Monitor does not appear in Mitigation Controls section

In GRC RAR in the u201CMitigationu201D tab, I added a new Mitigation Monitor in the u201CAdministratorsu201D section and a new Mitigating Control. When I try to add the new monitor in the u201CMonitorsu201D tab within the u201CMitigation Controlsu201D section, the new monitor does not appear as an option. Iu2019m pretty sure I have every bit of authorization possible, so I donu2019t think this is an auth issue. I do not have any users assigned to the new mitigation control, so that isnu2019t the problem either.Is there a trick to getting my new monitor to show up? Thank you!

You also are required to first add the users to a Business Unit: Mitigation - Business Units - Search
Edit the business unit associated with the Mitigating control that you created and add the users.
Go back to the mitigating control and you should not see the users that you associated with the Business Unit.
-J

Lightroom 5 does not appear in my App section

Lightroom 5 does not appear in my App section, my Mac is recent and has everything required, can you help?

if you follow all 7 steps you can dl a trial here: http://prodesigntools.com/lightroom-5-ddl-comparison-vs-lr4.html
and activate with your adobeID.
if you have a problem dl'g, you didn't follow all 7 steps. the most common error involves failing to meticulously follow steps 1,2 and/or 3 (which adds a cookie to your system enabling you to download the correct version from adobe.com). so, your browser must also accept cookies to enable these downloads.

Trying to download image files into lightrrom 5 on an imac running 10.8.5. Works fine with camera roll section but Icloud section does not appear as source in lightroom. How to access?

Trying to download image files into lightrrom 5 on an imac running 10.8.5. Works fine with camera roll section but Icloud section does not appear as source in lightroom. How to access?

You need to sync them in iTunes and download them there, then simply open them from the folder where they are stored in other programs.
Mylenium

Purchased Apps not appearing in purchased section!

My iPad was recently wiped out. As a result, I need to reload all of my apps from the app store. When accessing the 'Purchased' section on the app store, my purchased apps do not appear. The screen is blank. If you randomly click on the screen, the individual app wll appear on a new screen. However, I have a large quantity of apps to download, and I will not be able to do that for every app. Help!

There seems to be two problems with purchased apps not appearing. Both separate. For me, all I see is spinning circle until finally the app crashes. Everything else on the store works except the purchased app page. None of the posted solutions work for this type.
Others seem to be able to fix their problems with either signing out of the store and singing back in while, for some, just a hard reboot works.
Must be a bug somewhere that Only Apple can fix.

Can't perform a Apple Hardware Test because the alternate menu does not appear after pressing "D" while it restarts. What can I do?

I followed the instructions on the macbook manual and inserted the disk, i pressed and hold "D" but the menu did not appear.
I want to know if there is anything that can be done.
Thanks

Is the DVD you are trying to use the original install DVD or a retail Snow Leopard DVD

Device Synch Menus does not appear in iTunes 11 on Windows 8 PC

My 3rd generation iPod Nano connected to Windows-8 PC and iTunes 11 - Device "Summary" menu does not appear. If you select the <File> menu in iTunes there is an option to "Synch Nano". My iTunes is set to manually manage music on the Nano - because the "Summary" menu does not appear in iTunes it is impossible to select albums to Synch with the Nano.
On the upper right bar there is an eject button for the iPod Nano. This does in fact eject the Nano device and re-appears in iTunes if you disconnect the device then reconnect the iPod Nano.
No other device menus are present in iTunes 11 under Windows-8. The iPod Nano music library also does not appear.
Only the PC based iTunes music library is visible.
Itunes software versions are both current on the Nano and Windows-8 PC.
The computer was deauthorized and then authorized in iTunes.
The Synch History was reset in iTunes Preferences - this did not re-establish the Nano as a device to synch with iTunes. (Typically fixes similar problems)
Resetting nano device by holding Menu after switching unit on/off (Apple Logo Appears then Reboots Nano) makes no difference.
Nano shows as a drive in Windows-8 in "My Computer" and the operating system recognizes the device connection.
No problem ejecting and reconnecting the Nano in Itunes but traditional device menus are gone with the exception of the eject button.
Tested the same iTunes Nano on two other computers with iTunes 11 installed on Windows-7 and Windows XP - works fine. This issue only occurs on Windows-8 computers.
Any suggestions would be appreciated.

I just updated iTunes today and this seems to be the cause
If you're already at version 11.1.5.5, try the procedure in Cerbu's post:
Re: sync problem
... or try section 5 from the following document:
TS1538: iOS: Device not recognized in iTunes for Windows.

Strategy escalation not appearing in the escalation node of UWQ.

Hi,
Module: Advanced Collections
Customer has done the following test case:
There are three work items in the collection strategy. First two work items are automatic and completed successfully. Third work item is manual and need to be escalated to manager, if it is not closed within time limit.
Escalation for third Work Item has been setup. On the expiry of the time limit, system sends a email notification to the manager of the collector but this escalation is not appearing in the escalation node of the collectors work queue.
Checked the collections implementation guide and found the following:
"In the Escalation section, enter Yes and a closure time if you want an "automatic"
notification sent to the collector’s manager if the work item is not completed in the
specified time period"
It has not specified whether the escalation appears in the workqueue node of the manager.
I would like to know whether the escalations should appear in the escalation work queue node or is this an intended functionality.
Thanks and regards,
Hareesh

Hareesh,
As I see the work items a resource after esclation will only in the escalated node but not in the queue of the manager.
My requirement was to show the UQW items of the subordinates of a manager in the UWQ apart from his own. I am not sure the R11.10 and above with some patch levels has that functionality out of the box, but I had to change the metadata view defnition to show that info in the UWQ.
Going back to your question, escalations use task architecture. As the task owner is still the resource who holds the task of completing it, the task is not "assigned" to the manager but just a mail is sent keeping in the different bucket.
Hence that **May** not show in the manager queue. But if you change the metadata views, you can show all of my subordinates tasks to the manager as well which includes the escalations.
You can try using the task escalations screen to reassign the owner to be manager thus taking the task out my list and showing it up in my manager's list.
I have not tested this but you can try this option and use as a process step.
Thanks
Nagamohan

Have a problem with my MacBook Pro.5,3 and monitor. Intermittently, the desk top screen becomes broken up into vertical sections, which appear in the wrong order, creating a haphazard picture. The Apple icon, usually at top left corner, appears in to

have a problem with my MacBook Pro.5,3 and monitor. Intermittently, the desk top screen becomes broken up into vertical sections, which appear in the wrong order, creating a haphazard picture.
The Apple icon, usually at top left corner, appears in top right corner in a strip including all that left hand. When the computer is restarted, the screen goes back to normal. But I have to move the mouse to the far left of the screen and then up until it reappears on the far right hand side of the screen so that I can hit shut down button.
It seems to happen randomly though always on desk top and sometimes when I move mouse and computer switches on from rest mode. My large flat screen is relatively new.
The video card on this computer, which is approximately two years old, is Nvidia FeForce 9400M.
Any help would be welcome as my usual source of assistance is not available and I am not well versed in workings of the Mac although I have used one for many years.

That sounds like a Hardware problem.
You may be able to confirm that with Apple Hardware Test, or make an appointmenst for a free Genius Bar evaluation.

New IR's not appearing in Views for non-admins

We are in pre-production testing for SM 2012 SP1. We only have a few user roles beside the built in roles. We have a 'standard' group
which has access to just about everything except for sensitive items relating to user termination, legal, etc. We have a group which can see those sensitive items, and then we the built in administrators. <o:p></o:p>
When non-admins create an IR or SR, it sometimes takes up to 5 minutes for the item to show up a custom “all open incidents”
view, or in a custom “my incidents” view. In a few isolated cases, the work item did not appear for over an hour. However, admins can see all of these work items immediately in any view that should, by criteria, be displaying it.<o:p></o:p>
What would cause a work item to display immediately in all appropriate views for admins, but not for non-admins?<o:p></o:p>

Sorry for the delay in updating. Our management team got very frustrated with the performance and nearly killed the whole project. I got them to give SM another chance with R2, hoping that some of issues would be resolved. This issue was
not resolved.
So, I have continued testing. I cleaned up our Queues, so we only have 4 now in the Queues list. When I open the properties of the our custom user role, the Queue section displays our 4 queues, plus one called Work Item Group from the System
Work Item Library. I started with selecting just 1 Incident queue, for this user role. I created a new IR as this user, and it took nearly 15 minutes for the IR to appear in the view.
I then modified the user role and selected the "All work items can be accessed" radio button. I created another IR and it appeared in the view immediately. Now, this is where it gets interesting. I went back to the user role and set it
back to display a single queue, and the IR disappeared from the view. It didn't appear again for another 10 minutes.
The queue that is this IR should be assigned to is quite simple. Right now, I want it to display all incidents. It is not looking at an advanced class, just incident. Initially, I did not upt any criteria on it at all. I then tried
setting it to just Active Incidents, and still the IR's takes 10-15 minutes to appear.
I still don't understand what an aggressive queue is. Does my queue sound 'aggressive?' The view is looking at Incident (typical), not advanced. I don't see any obvious problems in the Workflow Status section of the Admin pane. What
should I be looking for next? I need to have the ability to filter queues by user roles, but it will cripple productivity if new IRs do not appear for 10-15 minutes.

Test section not appearing

Similar Messages

Maybe you are looking for