Test Web Form
When we try to test Web Form, we get an error message that the page cannot be opened? The link is also giving us the same response.
Can you tell me how to correct?
Could you provide these urls so we can take a look...
Similar Messages
-
Best practice for testing a web form after converting to a connection file
I was using InfoPath to test a web form using a web service for the connection. I decided to deploy the form to SharePoint to make sure it worked outside of InfoPath preview mode. This required me to convert the connection to a connection file and publish
that in SharePoint. After getting all that set up, it appears to work from SharePoint.
Now I want to go back and work on the form some more. But in InfoPath it appears preview is no longer an option because the form is using a connection file. While trying to preview the form I am given a message that basically says the form will have to be
published in order for it to make the connection. This would mean I would have to overwrite the form on SharePoint just to test.
I suppose I could publish to a different form library and switch back when I'm done but it would seem that InfoPath preview should still be an option for testing. Is there something I'm missing in InfoPath that would allow me to still test with this form?Not sure what you're doing, but previewing IP forms with data connections should be quite possible.
Scott Brickey
MCTS, MCPD, MCITP
www.sbrickey.com
Strategic Data Systems - for all your SharePoint needs
To put it simply, here are the basic steps:
Create IP form based on web service
Fill out form and test via Preview
Convert data connection to a connection file
Publish IP form and test on SharePoint
Go back into IP and try to test again via Preview <--- no longer works - now stuck with testing on SharePoint which is "live"
This could be a factor of how our SharePoint environment is configured. I have no other experience to base it on. -
Can any body tell me what is the url I should write in my browser to down load the web form tester through which i can send my connection information to the form server .
Thanks in advance.I mean like we use isqlplus to access our database server from any computer that has no thing to do with oracle (there is no oracle installed in) only by using the browser by writing the following on the address bar:
http://Ip: 80/isqlplus then it down load isqlplus page for inserting connection information. Now I'm looking for the URL that I should write on the address bar I can access my application server where is my forms and application logic is reside.
Thanks for your patience -
Web form tester. don't run the form.
Dear all,
i am using oracle 8i and forms 6i.
i am trying to run the web form tester but it give error.
i gave the forllowing parameters:
form : D:\Accano\logonscreen.fmx
Userid : mis
other parameters : useSDI= yes ( what is this?)
Look and Feel: Generic
Color Scheme : Teal
Web listener (HTTPD) Detail
web host : aserver
web port : 80
the HTTP server is already installed.
please hlpe me what is wrong?
thanks
Muhammad Nadeemok so u had installed WebDB right?
next thing have u configured your WebDB server...???
now u will ask me how can I configure that...then the ans is when u finished
installing forms....there must be one message box telling you view instruction....
remember that...ok u can get it now from...."forms6iconfig.txt" in your forms home. -
I have installed Forms6i, Forms Server 6i, and JInitiator. When I followed the instruction to run the Web Form Tester. it only opened an empty browser screen. Help. Thanks in advance.
Blake
nullBlake
I'm having the same problem. Have you been able to resolve it.
Thanks in advance
Sandy
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Blake ():
I have installed Forms6i, Forms Server 6i, and JInitiator. When I followed the instruction to run the Web Form Tester. it only opened an empty browser screen. Help. Thanks in advance.
Blake
<HR></BLOCKQUOTE>
null -
Working on BBPCRM 3.1 having this dump when testing web pages. Page contains the typical start pages of SAP hello world and a simple button...
Runtime Errors TEXTENV_INVALID
Exception CX_SY_LOCALIZATION_ERROR
Occurred on 19.09.2005 at 09:48:01
Error when generating text environment.
What happened?
What can you do?
Error analysis
How to correct the error
System environment
User, transaction...
Information on where terminated
Source code extract
001550 DLI_UPDATE = 'X'
001560 UPDCHK = 'U'
001570 EXCEPTIONS
001580 OTHERS = 1.
001590 COMMIT WORK.
001600 WHEN OTHERS.
001610 ENDCASE.
001620 ENDIF.
001630
001640 ENDIF. " updchk = c
001650
001660 * update the data
001670 IF UPDCHK EQ 'U'.
001680 IF FOL_UPDATE NE SPACE.
001690 * update for folder definitions
001700 PERFORM V_SOFD_PUBSEL(SAPFSSO6)
001710 TABLES V_SOFD_TAB
001720 USING RCODE.
001730 PERFORM SOFIND_SELARR_ALL_FOL(SAPFSSO6)
001740 TABLES SOFIND_TAB
001750 USING RCODE.
001760 SORT SOFIND_TAB. " yxu170797
001770 LOOP AT V_SOFD_TAB INTO V_SOFD_REC.
001780 CLEAR SOFIND_REC.
001790 MOVE: V_SOFD_REC-MANDT TO SOFIND_REC-MANDT,
001800 FLN TO SOFIND_REC-TYPE,
001810 V_SOFD_REC-OBJNAM TO SOFIND_REC-OBJDES,
001820 V_SOFD_REC-FOLTP TO SOFIND_REC-OBJTP,
001830 V_SOFD_REC-FOLYR TO SOFIND_REC-OBJYR,
001840 V_SOFD_REC-FOLNO TO SOFIND_REC-OBJNO.
> SET LOCALE LANGUAGE V_SOFD_REC-OBJLA.
001860 TRANSLATE SOFIND_REC-OBJDES TO UPPER CASE.
001870 SET LOCALE LANGUAGE SPACE.
001880 READ TABLE SOFIND_TAB INTO SOFIND_TAB_REC
001890 WITH KEY MANDT = SOFIND_REC-MANDT
001900 TYPE = SOFIND_REC-TYPE
001910 OBJDES = SOFIND_REC-OBJDES
001920 OBJTP = SOFIND_REC-OBJTP
001930 OBJYR = SOFIND_REC-OBJYR
001940 OBJNO = SOFIND_REC-OBJNO
001950 BINARY SEARCH.
001960 IF SY-SUBRC NE 0.
001970 APPEND SOFIND_REC TO SOFIND_INS_TAB.
001980 ELSE.
001990 DELETE SOFIND_TAB INDEX SY-TABIX.
002000 ENDIF.
002010 CLEAR SOFIND_REC.
002020 MOVE: V_SOFD_REC-MANDT TO SOFIND_REC-MANDT,
002030 FLD TO SOFIND_REC-TYPE,
002040 V_SOFD_REC-OBJDES TO SOFIND_REC-OBJDES,
Contents of system fields
SY field contents..................... SY field contents.....................
SY-SUBRC 0 SY-INDEX 0
SY-TABIX 1 SY-DBCNT 2
SY-FDPOS 0 SY-LSIND 0
SY-PAGNO 0 SY-LINNO 1
SY-COLNO 1 SY-PFKEY
SY-UCOMM SY-TITLE Update control
SY-MSGTY SY-MSGID
SY-MSGNO 000 SY-MSGV1
SY-MSGV2 SY-MSGV3
SY-MSGV4
Active calls / events
No.... Type........ Name..........................
Program
Include Line
Class
6 FUNCTION SO_SOFIND_UPDATE
SAPLSOC3
LSOC3U11 185
5 FORM SO_SOFIND_UPDATE
SAPLSOC3
LSOC3V11 35
4 FORM VB_CALL_FUNC
RSM13000
RSM13000 5441
3 FORM VB_V1_EXEC
RSM13000
RSM13000 5182
2 FORM VB_V1_NORMAL
RSM13000
RSM13000 3944
1 MODULE (PBO) VBEXEC
RSM13000
RSM13000 3793
Chosen variables
6 FUNCTION SO_SOFIND_UPDATE
SAPLSOC3
LSOC3U11 185
DLI_UPDATE
2
0
FOL_UPDATE X
5
8
UPDCHK U
5
5
V_SOFD_TAB Table IT_1[2x141]
RCODE 0
0000
0000
SYST-REPID SAPLSOC3
5454544322222222222222222222222222222222
310C3F3300000000000000000000000000000000
SOFIND_TAB Table IT_2[2x73]
ROLE_MAILER 4
3
4
V_SOFD_REC 100FOL28000000000001 D#
3334443333333333333322222222222222222422
1006FC2800000000000100000000000000000430
... + 40 #
2222222222222222222222222222222222222222
0000000000300000000000000000000000000000
... + 80 Q 0
2222222222222222222252222222222222222223
0000000000000000000010000000000000000000
... + 120 000120050808 20050808
333333333333233333333
000120050808020050808
VWST VWST
5555222222222222222222222222222222222222
6734000000000000000000000000000000000000
... + 40
222222222222222222222222222222
000000000000000000000000000000
SOFIND_REC 100FLN#
3334442222222222222222222222222222222222
1006CE3000000000000000000000000000000000
... + 40 FOL28000000000001
222222222222222244433333333333333
00000000000000006FC28000000000001
SENDMAIL_TOKEN_NOT_FOUND 90
0005
000A
USDI USDI
5544222222222222222222222222222222222222
5349000000000000000000000000000000000000
... + 40
222222222222222222222222222222
000000000000000000000000000000
SPOOL_READ_ERROR 56
0003
0008
SY-REPID SAPLSOC3
5454544322222222222222222222222222222222
310C3F3300000000000000000000000000000000
SOFIND_REC-OBJDES #
2222222222222222222222222222222222222222
3000000000000000000000000000000000000000
... + 40
2222222222
0000000000
V_SOFD_REC-OBJNAM #
222222222222
300000000000
SCR SCR
545
332
USRE USRE
5554222222222222222222222222222222222222
5325000000000000000000000000000000000000
... + 40
222222222222222222222222222222
000000000000000000000000000000
OBJ OBJ
444
F2A
USSA USSA
5554222222222222222222222222222222222222
5331000000000000000000000000000000000000
... + 40
222222222222222222222222222222
000000000000000000000000000000
URL URL
554
52C
USSI USSI
5554222222222222222222222222222222222222
5339000000000000000000000000000000000000
... + 40
222222222222222222222222222222
000000000000000000000000000000
%_DUMMY$$
2222
0000
DX40 DX40
4533222222222222222222222222222222222222
4840000000000000000000000000000000000000
... + 40
222222222222222222222222222222
000000000000000000000000000000
SOFIND_TAB_REC
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 40
222222222222222222222222222222222
000000000000000000000000000000000
ATTA ATTA
4554222222222222222222222222222222222222
1441000000000000000000000000000000000000
... + 40
222222222222222222222222222222
000000000000000000000000000000
OFFICE_TASO13 SO13
5433222222222222222222222222222222222222
3F13000000000000000000000000000000000000
... + 40
222222222222222222222222222222
000000000000000000000000000000
SOFIND_REC-MANDT 100
333
100
OFFICE_TASO14 SO14
5433222222222222222222222222222222222222
3F14000000000000000000000000000000000000
... + 40
222222222222222222222222222222
000000000000000000000000000000
SOFIND_REC-TYPE FLN
444
6CE
OFFICE_TASO15 SO15
5433222222222222222222222222222222222222
3F15000000000000000000000000000000000000
... + 40
222222222222222222222222222222
000000000000000000000000000000
5 FORM SO_SOFIND_UPDATE
SAPLSOC3
LSOC3V11 35
ROLE_SUBST_ACTIVE 3
3
3
%_STATE Y
5
9
%_PRINT 000
2222333222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 40
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 80 0 ########
2222222222320000000022222222222222222222
0000000000000000000000000000000000000000
... + 120
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 160 0 ####
222222222222223222222222222222220000
000000000000000000000000000000000000
URLA URLA
5544222222222222222222222222222222222222
52C1000000000000000000000000000000000000
... + 40
222222222222222222222222222222
000000000000000000000000000000
%_KEY 432D0497CD9B3890E1000000AC101A01####
333433334434333343333333443334330000
432404973492389051000000131011010001
SY-SUBRC 0
0000
0000
REMA REMA
5444222222222222222222222222222222222222
25D1000000000000000000000000000000000000
... + 40
222222222222222222222222222222
000000000000000000000000000000
%_P0000000001 X
5
8
RERE RERE
5454222222222222222222222222222222222222
2525000000000000000000000000000000000000
... + 40
222222222222222222222222222222
000000000000000000000000000000
%_P0000000002
2
0
REPA REPA
5454222222222222222222222222222222222222
2501000000000000000000000000000000000000
... + 40
222222222222222222222222222222
000000000000000000000000000000
%_P0000000003 U
5
5
SY-XFORM
222222222222222222222222222222
000000000000000000000000000000
4 FORM VB_CALL_FUNC
RSM13000
RSM13000 5441
SAVE_VBPARAM #
0
3
VBPARAM 432D0497CD9B3890E1000000AC101A010001SO_S
3334333344343333433333334433343333335455
4324049734923890510000001310110100013FF3
... + 40 OFIND_UPDATE PSAKINDI 10
4444455544542222222222222255444444222233
F69E4F50414500000000000000031B9E49000010
... + 80 0### ##
3000222222222222222222222222222220022222
0612000000000000000000000000000001100000
... + 120
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 160
2222222222222222222
0000000000000000000
VBHDR-VBTCODE SO00
54332222222222222222
3F000000000000000000
VBHDR-VBREPORT SAPLSOC3
5454544322222222222222222222222222222222
310C3F3300000000000000000000000000000000
VBMODCNT 1
0000
0001
DLDE DLDE
4444222222222222222222222222222222222222
4C45000000000000000000000000000000000000
... + 40
222222222222222222222222222222
000000000000000000000000000000
VBPARAM-VBPHASE 16916512
0
1
VB_V1_TEST #
0
2
SYST-REPID RSM13000
5543333322222222222222222222222222222222
23D1300000000000000000000000000000000000
HGEN HGEN
4444222222222222222222222222222222222222
875E000000000000000000000000000000000000
... + 40
222222222222222222222222222222
000000000000000000000000000000
IS_A_ARFC #
0
0
TH_TRUE #
0
1
OFFICE_TASO00 SO00
5433222222222222222222222222222222222222
3F00000000000000000000000000000000000000
... + 40
222222222222222222222222222222
000000000000000000000000000000
TH_FALSE #
0
0
VBDEBUG 35659808
0
2
VBSELECT-VBANZAHL 00000
33333
00000
EWST EWST
4555222222222222222222222222222222222222
5734000000000000000000000000000000000000
... + 40
222222222222222222222222222222
000000000000000000000000000000
BACK BAC
4442222222222222222222222222222222222222
2130000000000000000000000000000000000000
... + 40
222222222222222222222222222222
000000000000000000000000000000
TFDIR SO_SOFIND_UPDATE SAPLSOC3
5455444445554454222222222222225454544322
3FF3F69E4F50414500000000000000310C3F3300
... + 40 1100000000
2222222222222222222222222222223333333333
0000000000000000000000000000001100000000
... + 80 S 1
52222222222223
30000000000001
TFDIR-PNAME SAPLSOC3
5454544322222222222222222222222222222222
310C3F3300000000000000000000000000000000
VBFUNC SO_SOFIND_UPDATE
545544444555445422222222222222
3FF3F69E4F50414500000000000000
%_DUMMY$$
2222
0000
VBID 432D0497CD9B3890E1000000AC101A01####
333433334434333343333333443334330000
432404973492389051000000131011010001
VBSTAT-PROC2_REQ
222222222222222
000000000000000
VB_UPDATE_MODUL_PROCESSED #
1
C
3 FORM VB_V1_EXEC
RSM13000
RSM13000 5182
ROLE_SUBST_ACTIVE 3
3
3
VBMOD_TABL-VBMODE 1
3
1
VB_COLLECTOR_FB 5
3
5
SY-REPID RSM13000
5543333322222222222222222222222222222222
23D1300000000000000000000000000000000000
LISL LISL
4454222222222222222222222222222222222222
C93C000000000000000000000000000000000000
... + 40
222222222222222222222222222222
000000000000000000000000000000
EXISTS_COLLECTOR #
0
0
VB_V1_FB 1
3
1
VB_V1_NO_UPD_AGAIN_FB 3
3
3
VBHDR-VBSTATE -16759503
F
F
VB_V1_PROCESSED #
0
1
VB_V1_AND_V2_PROCESSED #
0
2
SYST ########################################
0000000000000000000000000000000000000000
0000000000010002000000000000000000000000
... + 40 ########################################
0000000000000000000000090000000000000008
00020000000100000001000A000000000000000D
... + 80 ########################################
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
... + 120 ########################################
0000000000000000000000000000000000010009
00000000000000000000000000000000000B0000
... + 160 ################X ############# E0 3
0000000000000000520000000000000222432223
0000000000000000800010000C0000C000500003
... + 200 000 N ####__S 100
3332222222420000555222222222222222223332
0000000000E00000FF3000000000000000001000
... + 240 00
222223322222222
000000000000000
MTAS MAS
4452222222222222222222222222222222222222
D130000000000000000000000000000000000000
... + 40
222222222222222222222222222222
000000000000000000000000000000
VBMOD_TABL-VBKEY 432D0497CD9B3890E1000000AC101A01
33343333443433334333333344333433
43240497349238905100000013101101
VBMOD_TABL-VBFUNC SO_SOFIND_UPDATE
545544444555445422222222222222
3FF3F69E4F50414500000000000000
VBMOD_TABL-VBMODCNT 1
0000
0001
LOC_VBPARAM-VBPHASE 16916512
0
1
LOC_VBPARAM-VBDEBUG 35659808
0
2
READ READ
5444222222222222222222222222222222222222
2514000000000000000000000000000000000000
... + 40
222222222222222222222222222222
000000000000000000000000000000
EXISTS_V2 #
0
0
SPACE
2
0
NEW_VBSTATE 0
0
0
VBHDR 432D0497CD9B3890E1000000AC101A01100PSAKI
3334333344343333433333334433343333355444
43240497349238905100000013101101100031B9
... + 40 NDI SAPLSOC3
4442222222222222222545454432222222222222
E490000000000000000310C3F330000000000000
... + 80 SO00
2222222222222222222543322222222222222222
00000000000000000003F0000000000000000000
... + 120
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 160 ###�sapzoo_SMG_00
22222222222222222222000F7677665544533222
00000000000000000000000F310AFFF3D7F00000
... + 200
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 240 :E:
222222223432222
00000000A5A0000
OFFICE_TASO18 SO18
5433222222222222222222222222222222222222
3F18000000000000000000000000000000000000
... + 40
222222222222222222222222222222
000000000000000000000000000000
LOC_VBPARAM 432D0497CD9B3890E1000000AC101A010001SO_S
3334333344343333433333334433343333335455
4324049734923890510000001310110100013FF3
... + 40 OFIND_UPDATE PSAKINDI 10
4444455544542222222222222255444444222233
F69E4F50414500000000000000031B9E49000010
... + 80 0### ##
3000222222222222222222222222222220022222
0612000000000000000000000000000001100000
... + 120
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 160
2222222222222222222
0000000000000000000
SY-XPROG
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
SY-XFORM
222222222222222222222222222222
000000000000000000000000000000
2 FORM VB_V1_NORMAL
RSM13000
RSM13000 3944
VBHDR-VBCLIINFO #
0
0
VB_SYNC_VB #
0
1
%_ARCHIVE
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 40
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 80
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 120
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 160
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 200
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 240
222222222222222
000000000000000
SY-MSGID
22222222222222222222
00000000000000000000
ROOM_TAPP30 PP30
5533222222222222222222222222222222222222
0030000000000000000000000000000000000000
... + 40
222222222222222222222222222222
000000000000000000000000000000
ADMI ADM
4442222222222222222222222222222222222222
14D0000000000000000000000000000000000000
... + 40
222222222222222222222222222222
000000000000000000000000000000
SY-MSGNO 000
333
000
NOTE_NOT_ADDED 11
0000
000B
SY-MSGV1
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 40
2222222222
0000000000
SY-MSGV2
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 40
2222222222
0000000000
SY-MSGV3
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 40
2222222222
0000000000
SY-MSGV4
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 40
2222222222
0000000000
LOGO LOG
4442222222222222222222222222222222222222
CF70000000000000000000000000000000000000
... + 40
222222222222222222222222222222
000000000000000000000000000000
VBHDR 432D0497CD9B3890E1000000AC101A01100PSAKI
3334333344343333433333334433343333355444
43240497349238905100000013101101100031B9
... + 40 NDI SAPLSOC3
4442222222222222222545454432222222222222
E490000000000000000310C3F330000000000000
... + 80 SO00
2222222222222222222543322222222222222222
00000000000000000003F0000000000000000000
... + 120
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 160 ###�sapzoo_SMG_00
22222222222222222222000F7677665544533222
00000000000000000000000F310AFFF3D7F00000
... + 200
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 240 :E:
222222223432222
00000000A5A0000
1 MODULE (PBO) VBEXEC
RSM13000
RSM13000 3793
VB_V1_NORMAL #
0
1
%_SPACE
2
0
STOP RET
Hi Stephan,
unless we don't ask for it, please do not post this much content. This might be suitable for support messages, but not for this forum. There might be situations where you get asked for more information, but a post like this one just scares of anyone who might know an answer.
Also, your thread title does not give any information on your problem, as a "dump when testing web pages" can be anything.
I would suggest to re-state your question, just giving the information that others need.
I haven't worked with CRM, but I wonder if this is a custom application or a shipped one. -
How do I create a dependant drop down in a web form?
I am trying to add a web form to a web page that includes a dependant drop down menu. For example, I'd like there to be a drop down menu called "Interested Class" with three fields: "Tribe Fit", "Tribe Life" and "Tribe Core". When a user selects one of these fields ("Tribe Fit" for example), I want a new drop down menu to appear with the following choices: "7:00am", "12:30pm", "7:00pm".
I have attempted this here and as you can see it's not working at the moment. The time drop down fields should be hidden until an "Interested Class" has been selected.
http://www.cityfitness.com.au/nicole-form-test?Preview=True
I've placed my JS code in the HTML view of the actual web page as I noticed when I place it in the actual custom form it doesn't carry through to the page. I don't know if I'm placing my JS in the correct place though.
Here is a snippet of my code if it helps:
<tr>
<td><label for="CAT_Custom_328771">Interested Class</label><br />
<select name="CAT_Custom_328771" id="CAT_Custom_328771" class="cat_dropdown">
<option value=" ">-- Please select --</option>
<option value="Tribe Fit">Tribe Fit</option>
<option value="Tribe Life">Tribe Life</option>
<option value="Tribe Core">Tribe Core</option>
</select>
</td>
</tr>
<tr>
<td>
<div id="fit" class="times">
<select>
<option value="7:00am">7:00am</option>
<option value="12:30pm">12:30pm</option>
<option value="7:00pm">7:00pm</option>
</select>
</div>
<div id="life" class="times">
<select>
<option value="7:00am">7:00am</option>
<option value="8:00am">8:00am</option>
<option value="11:30am">11:30am</option>
</select></div>
<div id="core" class="times">
<select>
<option value="8:00am">8:00am</option>
<option value="11:30am">11:30am</option>
<option value="12:30pm">12:30pm</option>
</select>
</div>
</td>
</tr>
<tr>
<td><input class="cat_button" type="submit" value="Submit" id="catwebformbutton" /></td>
</tr>
</tbody>
</table>
<script type="text/javascript" src="/CatalystScripts/ValidationFunctions.js"></script>
<script type="text/javascript">
$(function () {
$('#CAT_Custom_328771').change(function () {
$('.times').hide();
$('#' + $(this).val()).show();
//<![CDATA[
var submitcount67919 = 0;function checkWholeForm67919(theForm){var why = "";if (theForm.FirstName) why += isEmpty(theForm.FirstName.value, "First Name"); if (theForm.LastName) why += isEmpty(theForm.LastName.value, "Last Name"); if (theForm.EmailAddress) why += checkEmail(theForm.EmailAddress.value); if (theForm.HomePhone) why += isEmpty(theForm.HomePhone.value, "Home Phone Number"); if (theForm.HomeAddress) why += isEmpty(theForm.HomeAddress.value, "Home Address"); if (theForm.HomeCity) why += isEmpty(theForm.HomeCity.value, "Home City"); if (theForm.HomeState) why += isEmpty(theForm.HomeState.value, "Home State"); if (theForm.HomeZip) why += isEmpty(theForm.HomeZip.value, "Home Zipcode"); if (theForm.HomeCountry) why += checkDropdown(theForm.HomeCountry.value, "Home Country"); if(why != ""){alert(why);return false;}if(submitcount67919 == 0){submitcount67919++;theForm.submit();return false;}else{alert("Form submission is in progress.");return false;}}
//]]>
</script>
</form>
Can anyone please help explain to me how I can make this work? I am only a JS beginner - so please try to explain in simple terms if possible.
Thank you!
NicoleThis wont work, Needs to be a lot more then this and CSS to hide things rather then script hiding them.
Nicole, The times that are availible I gather differ depending on the type of the dropdown?
You do not need multiple time dropdowns.
Steps you need to do first on the form:
1. Ensure the custom form field dropdown for interested class exists.
2. Have custom dropdown with all the times that any of them can be. This is CSS hidden by default.
3. Also CSS hide all the options in the select as well in your CSS.
Next can you show what classes have what times as an example then can put the code more relevent to your example you can work off.
The code will follow along the lines of....
Dropdown On Change
If selected options is xxx class then
fade in option times dropdown
Show these otpion times
if selected option is zzz class then
fade in option times dropdown
show these times
More control as you need to work properly, only two dropdowns needed. -
My web form is not working with PayPal
Only seamless gateways such as the "Pro" version of PayPal, eWay or Authorize.net will work with form payments. Gateways that have the user leave BC, such as PayPal Standard, Google Checkout or Realex, only work with the online store.
I did further testing:
1. I turned off the IPN and I still received the Error page.
2. Than I went and turned off the Payment Data Transfer, and now I got the blank page... /PaymentProcess.aspx?paypal=success. However, I still got the paypal transaction ID attached to the orders.
3. I turned on the IPN and still got the blank /PaymentProcess.aspx?paypal=success and I still got the paypal transaction ID attached to the orders.So the conclusion is that IPN has no bearing on payments made with PayPal Standard when it is used with custom forms.
4. I chaged the URL in the Return URL to go to the secure home page instea of to /PaymentProcess.aspx. and...it still sent me to the PaymentProcess.aspx and I still got the paypal transaction ID attached to the orders.
5. I made the purchase using shoping cart to ensure it works too and this time I even received the receipt on the /PaymentProcess.aspx. The Ref# and Auth Code were "Not Applicable" but it still worked and it was recorded in the orders with the paypal transaction ID
So my conclusions are:
1. IPN has no bearing on PayPal payments made from the custom web form
2. Payment Data Transfer being on sends to the pafe that can't be processesd and it renders Error message
3. Return URL always send you to the PaymentProcess/aspx regardless what secure url you put in there.
4. Transcation ID is always passed to the orders as long as it can connect to PayPal. I guess ur will do it as long as the Payment Gateway has the proper informration in there.
5. It works the same from the custom web form and from checkout form.
I hope this sheds some light and serves some purpose to whoever is completely confused by this as I am.
Mario and Liam, thanks for your help. Much appreciated. -
Not able to generate a test PDF form
Hello gurus,
I have created PDF forms before using WDJ.
Now I fail to to generate a test PDF form using the help at
[How to Create Online and Offline Forms in Web Dynpro (NW2004)|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/4fd2d690-0201-0010-de83-b4fa0c93e1a9]
I have a supply function attached to the node and have also initialized the node and attributes in doinit method.
The environment is NWDS 7.0.19 with Adobe Livecycle Designer 7.1 and deploying on EP 7.0 SP19. I get error reported as follows:
com.sap.tc.webdynpro.clientserver.adobe.pdfdocument.base.core.PDFDocumentRuntimeException: Failed to UPDATEDATAINPDF
I am trying to resolve to issue and still clueless. Any suggestions is welcome.
regards,
Sukanta
Edited by: Jason Lax on Dec 28, 2011 2:55 PM (Fixed broken link)Hi ,
Is the ADS configured in your landscape ?
If so please check that the password of ADSUSER expired or not in visual admin.
I guess there is an option to check password never expires .
Please check the below links for some common issues.
Common Problems with SAP Interactive Forms by Adobe - PART I -
Common Problems with SAP Interactive Forms by Adobe - PART II -
Thanks,
Sandip
Edited by: Sandip Kundu on May 11, 2011 1:07 PM -
Slow response on Windows 2003 with web forms
We are current running Oracle web forms on thin clients on Windows 2000 terminal server. We have installed Windows 2003 on one node of the cluster. When we run the same application on 2003, it is very slow and the screen flashes a lot. It takes 1-2 seconds to echo a keystroke. This is true for Jinitiator 1.3.1.25 and 1.3.1.18. We are using 1.3.1.18 on the Win 2000 terminal server. When I try form=test on Win 2003, the screen has colors and has poorer resolution that running the same on Win2003. The form has a grey background on Win 2000 but is magenta in Win 2003 and you can barely make out the hammer in the prompt. This happens when running from the same thin client with the same resolution and colors. Is there a setting on IE that could be causing this? Is there a problem with Win 2003? The Oracle application server is 9iAS but we see the same probelm with 10g.
Thanks,
DaveCopying my response from this thread:
Report in Designer fast, in Viewer extremely slow
Thread is now locked.
A "cool" issue, form my perspective as this may be something new to think about / figure out. Not so cool from where you sit...
Anyhow, a few things to check:
1) Compare the runtime of your dev system and the Citrix system. Use Modules to do the comparison.
2) Not sure what runtime was installed, but the most recent MSI / MSM are from SP 1.4:
MSI
https://smpdl.sap-ag.de/~sapidp/012002523100004610752009E/cr2008_fp14_ri.zip
MSM
https://smpdl.sap-ag.de/~sapidp/012002523100004610922009E/cr2008_fp14_mm.zip
Trying the FP 1.4 runtime will be worth a shot.
3) How is the performance on the Citrix when you actually sit right on the server, and not on a work station?
4) Where is the slow down occurring (unfortunately this will require a bit of temporary code modification)? But the bottle necks typically are at:
-report load
- connection to the data source
- setting of parameters
- actual report output, be it to a viewer, export or printer.
I suggest a possible way of tackling this in the performance article (page 4):
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/8029cc96-6ff3-2b10-47a2-b30ea790ea5b
Ludek -
First ever Web Form - URL error
Hi. I'm attempting to call my first Web form, but I'm getting this error:
URL:
http://springfield01:7777/forms/frmservlet?config=ttmsmenu
ERROR:
500 Internal Server Error
Forms Servlet Error.
Missing or invalid value for baseHTML parameter.
Please check the servlet configuration to make sure this value specifies a valid file.
My FormsWeb.Cfg file is posted below. Any help would be greatly appreciated!
FORMSWEB.CFG:
# $Id: formsweb.cfg 15-apr-2005.13:17:30 pkuhn Exp $
# formsweb.cfg defines parameter values used by the FormsServlet (frmservlet)
# This section defines the Default settings. Any of them may be overridden in the
# following Named Configuration sections. If they are not overridden, then the
# values here will be used.
# The default settings comprise two types of parameters: System parameters,
# which cannot be overridden in the URL, and User Parameters, which can.
# Parameters which are not marked as System parameters are User parameters.
# SYSTEM PARAMETERS
# These have fixed names and give information required by the Forms
# Servlet in order to function. They cannot be specified in the URL query
# string. But they can be overridden in a named configuration (see below).
# Some parameters specify file names: if the full path is not given,
# they are assumed to be in the same directory as this file. If a path
# is given, then it should be a physical path, not a URL.
# USER PARAMETERS
# These match variables (e.g. %form%) in the baseHTML file. Their values
# may be overridden by specifying them in the URL query string
# (e.g. "http://myhost.mydomain.com/forms/frmservlet?form=myform&width=700")
# or by overriding them in a specific, named configuration (see below)
[default]
# System parameter: default base HTML file
baseHTML=base.htm
# System parameter: base HTML file for use with JInitiator client
baseHTMLjinitiator=basejini.htm
# System parameter: base HTML file for use with Sun's Java Plug-In
baseHTMLjpi=basejpi.htm
# System parameter: delimiter for parameters in the base HTML files
HTMLdelimiter=%
# System parameter: working directory for Forms runtime processes
# WorkingDirectory defaults to <oracle_home>/forms if unset.
workingDirectory=
# System parameter: file setting environment variables for the Forms runtime processes
envFile=default.env
# Forms runtime argument: whether to escape certain special characters
# in values extracted from the URL for other runtime arguments
escapeparams=true
# Forms runtime argument: which form module to run
form=test.fmx
# Forms runtime argument: database connection details
userid=
# Forms runtime argument: whether to run in debug mode
debug=no
# Forms runtime argument: host for debugging
host=
# Forms runtime argument: port for debugging
port=
# Other Forms runtime arguments: grouped together as one parameter.
# These settings support running and debugging a form from the Builder:
otherparams=buffer_records=%buffer% debug_messages=%debug_messages% array=%array% obr=%obr% query_only=%query_only% quiet=%quiet% render=%render% record=%record% tracegroup=%tracegroup% log=%log% term=%term%
# Sub argument for otherparams
buffer=no
# Sub argument for otherparams
debug_messages=no
# Sub argument for otherparams
array=no
# Sub argument for otherparams
obr=no
# Sub argument for otherparams
query_only=no
# Sub argument for otherparams
quiet=yes
# Sub argument for otherparams
render=no
# Sub argument for otherparams
record=
# Sub argument for otherparams
tracegroup=
# Sub argument for otherparams
log=
# Sub argument for otherparams
term=
# HTML page title
pageTitle=Oracle Application Server Forms Services
# HTML attributes for the BODY tag
# HTMLbodyAttrs=
# immediately hide the applet parent window
HTMLbodyAttrs=onLoad='javascript:self.moveTo(1601,1201)'
# HTML to add before the form
# HTMLbeforeForm=
HTMLbeforeForm=<SCRIPT LANGUAGE="JavaScript">window.opener = top;</SCRIPT>
# HTML to add after the form
HTMLafterForm=
# Forms applet parameter: URL path to Forms ListenerServlet
serverURL=/forms/lservlet
# Forms applet parameter
codebase=/forms/java
# Forms applet parameter
# imageBase=DocumentBase
imageBase=/forms/java
# Forms applet parameter
#width=1000
#width=100%
width=500
# Forms applet parameter
#height=700
#height=100%
height=500
# Forms applet parameter
separateFrame=true
# separateFrame=
# Forms applet parameter
splashScreen=no
#splashScreen=ttmslogo_new.gif
# Forms applet parameter
background=no
# background=
# background=ttmslogo_new.gif
# Forms applet parameter
logo=ttms_banner.gif
# Forms applet parameter
lookAndFeel=Oracle
# Forms applet parameter
colorScheme=teal
# Forms applet parameter
restrictedURLparams=HTMLbodyAttrs,HTMLbeforeForm,pageTitle,HTMLafterForm,log,allow_debug,allowNewConnections
# Forms applet parameter
formsMessageListener=
# Forms applet parameter
recordFileName=
# Forms applet parameter
serverApp=default
# Forms applet archive setting for JInitiator
archive_jini=frmall_jinit.jar
# Forms applet archive setting for other clients (Sun Java Plugin, Appletviewer, etc)
archive=frmall.jar
# Number of times client should retry if a network failure occurs. You should
# only change this after reading the documentation.
networkRetries=0
# Page displayed to Netscape users to allow them to download Oracle JInitiator.
# Oracle JInitiator is used with Windows clients.
# If you create your own page, you should set this parameter to point to it.
jinit_download_page=/forms/jinitiator/us/jinit_download.htm
# Parameter related to the version of JInitiator
jinit_classid=clsid:CAFECAFE-0013-0001-0022-ABCDEFABCDEF
# Parameter related to the version of JInitiator
jinit_exename=jinit.exe#Version=1,3,1,22
# Parameter related to the version of JInitiator
jinit_mimetype=application/x-jinit-applet;version=1.3.1.22
# Page displayed to users to allow them to download Sun's Java Plugin.
# Sun's Java Plugin is typically used for non-Windows clients.
# (NOTE: you should check this page and possibly change the settings)
jpi_download_page=http://java.sun.com/products/archive/j2se/1.4.2_06/index.html
# Parameter related to the version of the Java Plugin
jpi_classid=clsid:CAFEEFAC-0014-0002-0006-ABCDEFFEDCBA
# Parameter related to the version of the Java Plugin
jpi_codebase=http://java.sun.com/products/plugin/autodl/jinstall-1_4_2-windows-i586.cab#Version=1,4,2,06
# Parameter related to the version of the Java Plugin
jpi_mimetype=application/x-java-applet;jpi-version=1.4.2_06
# EM config parameter
# Set this to "1" to enable Enterprise Manager to track Forms processes
em_mode=0
# Single Sign-On OID configuration parameter
oid_formsid=%OID_FORMSID%
# Single Sign-On OID configuration parameter
oracle_home=/apps/oracle9i/product/oracleforms
# Single Sign-On OID configuration parameter
formsid_group_dn=%GROUP_DN%
# Single Sign-On OID configuration parameter: indicates whether we allow
# dynamic resource creation if the resource is not yet created in the OID.
ssoDynamicResourceCreate=true
# Single Sign-On parameter: URL to redirect to if ssoDynamicResourceCreate=false
ssoErrorUrl=
# Single Sign-On parameter: Cancel URL for the dynamic resource creation DAS page.
ssoCancelUrl=
# Single Sign-On parameter: indicates whether the url is protected in which
# case mod_osso will be given control for authentication or continue in
# the FormsServlet if not. It is false by default. Set it to true in an
# application-specific section to enable Single Sign-On for that application.
ssoMode=false
# The parameter allow_debug determines whether debugging is permitted.
# Administrators should set allow_debug to "true" if servlet
# debugging is required, or to provide access to the Forms Trace Xlate utility.
# Otherwise these activities will not be allowed (for security reasons).
allow_debug=false
# Parameter which determines whether new Forms sessions are allowed.
# This is also read by the Forms EM Overview page to show the
# current Forms status.
allowNewConnections=true
# EndUserMonitoring
# EndUserMonitoringEnabled parameter
# Indicates whether EUM/Chronos integration is enabled
EndUserMonitoringEnabled=
# EndUserMonitoringURL
# indicates where to record EUM/Chronos data
EndUserMonitoringURL=
# Example Named Configuration Section
# Example 1: configuration to run forms in a separate browser window with
# "generic" look and feel (include "config=sepwin" in the URL)
# You may define your own specific, named configurations (sets of parameters)
# by adding special sections as illustrated in the following examples.
# Note that you need only specify the parameters you want to change. The
# default values (defined above) will be used for all other parameters.
# Use of a specific configuration can be requested by including the text
# "config=<your_config_name>" in the query string of the URL used to run
# a form. For example, to use the sepwin configuration, your could issue
# a URL like "http://myhost.mydomain.com/forms/frmservlet?config=sepwin".
[sepwin]
separateFrame=True
lookandfeel=Generic
# Example Named Configuration Section
# Example 2: configuration forcing use of the Java Plugin in all cases (even if
# the client browser is on Windows)
[jpi]
baseHTMLJInitiator=basejpi.htm
# Example Named Configuration Section
# Example 3: configuration running the Forms ListenerServlet in debug mode
# (debug messages will be written to the servlet engine's log file).
[debug]
serverURL=/forms/lservlet/debug
# Sample configuration for deploying WebUtil. Note that WebUtil is shipped with
# DS but not AS and is also available for download from OTN.
[webutil]
WebUtilArchive=frmwebutil.jar,jacob.jar
WebUtilLogging=off
WebUtilLoggingDetail=normal
WebUtilErrorMode=Alert
WebUtilDispatchMonitorInterval=5
WebUtilTrustInternal=true
WebUtilMaxTransferSize=16384
baseHTMLjinitiator=webutiljini.htm
baseHTMLjpi=webutiljpi.htm
archive_jini=frmall_jinit.jar
archive=frmall.jar
lookAndFeel=oracle
[ttmsmenu]
WebUtilArchive=frmwebutil.jar,jacob.jar
WebUtilLogging=off
WebUtilLoggingDetail=normal
WebUtilErrorMode=Alert
WebUtilDispatchMonitorInterval=5
WebUtilTrustInternal=true
WebUtilMaxTransferSize=16384
baseHTMLjinitiator=webutiljini.htm
baseHTMLjpi=webutiljpi.htm
baseHTML=webutilbase.htm
archive_jini=frmall_jinit.jar
archive=frmall.jar
lookAndFeel=oracle
width=500
height=500
background=no
form=ttmsmenu.fmx# or by overriding them in a specific, named configuration (see below)
[default]
this line seems to start a named section that finishes nowhere.
comment this line (put a # in front of it)
FRancois -
Possible to show file upload progress for web form submission?
I just made a simple form as a test. There are 3 files being submitted here via a "web form".
Files being uploaded in this case are of these sizes:
110MB
9MB
24MB
I'm testing functionality that will let a print shop's clients upload their files. For larger files they'll use FTP but this "order form" does a lot of business for them so we're trying to replicate in BC.
My problem is that I am wondering if there is a way to show the "upload progress" as a total %. Such as a visual status bar, etc.
As of now the only way it's showing is in the default browser status bar (chrome in this case):
http://cl.ly/image/1d3U0S1h2521
I read somewhere that the limit is 150MB for an upload. Wondering if that means 150MB TOTAL as in 3 files combined in my case. Or If I chose to allow 3 files to be attached would it allow for 450MB?
Also, if you do a user submitted web app instead and allow people to attach files that way, does the same file limit apply?
My second issue is that the upload speed seems to be SLOW. I know it's not my connection because on my non BC site as well as another with the same form, the files upload fairly fast. But on BC it just crawls and on a few tests I get this:
http://cl.ly/image/2T2q160M1R1n
Any help or suggestions with the file upload progress as well as file upload speed would be appreciated.
Thanks!So if i have 3 files to be uploaded, the max allowed is 750MB correct? (just wondering if when uploading its 250mb total or per file).
Guess i'll do something fake to make it appear its working with a loading graphic or something.
My web browser (chrome in this case) shows the % uploaded. I wonder if all web browsers do the same. I havent tested yet.
If only there were a way to have javascript or something grab that same #% from the web browser itself and just format it to appear where I want on the form along with the % uploading.
Anyone know if that's possible?
Here's where Chrome for mac shows it:
http://cl.ly/image/1c3i3x25262j
If I could grab that (uploading 19%) from the browser and format it into css/html i'd be gold.
Then find if similar browsers do the same and write some js for each browser specifically to grab it.
In a perfect world at least.... -
PB 12.5.1 Web Forms save as PDF
I'm having trouble creating PDF files in a Web Forms app deployed to a new server. I've done this successfully a few times using apparently identical configurations, so I'm not sure what's going on. Facts about the situation:
1. PB Classic 12.5.1 Web Forms target
2. IIS 7.5 on a remote Windows Server 2008 R2 server
3. Ghostscript 8.71
4. To determine whether Ghostscript was the problem, I installed a Win32 version of the PB app on the IIS server computer and tested. SaveAs() works as expected in the Win32 target.
5. To determine whether file system permissions were a problem, I used the Web Forms app to SaveAs() a text document and performed the DownloadFile(). The file downloads as expected.
6. It is the SaveAs() function call that is failing. The line
dw_report.SaveAs(<filename>, PDF!, FALSE)
returns -1
Thanks in advance for any suggestions...Ronnie,
Here is some code that I use in a webform application to create a PDF file and send it as an attachment. Remember that you have to do MapVirtualPath so you can find the file after you do dw_1.saveas...
Also, when I had trouble it was because I named my printer 'Sybase Datawindow' instead of 'Sybase Datawindow PS'.
Chris Pollach recently posted some great step by step installation procedures for 32 and 64 bit machines.
Best,
Paul
//Email Datawindow Saved As PDF Button
long random_number
string random_number_string
randomize( cpu() )
random_number = rand(9999)
random_number_string = string(random_number)
string user_id
user_id = trim(email)
string bodytext
bodytext = 'Dear XXX, ' + '~r~n' + '~r~n' + 'Please find attached the XXX report in PDF format.' + '~r~n' + '~r~n' + 'Thank you,' + '~r~n' + '~r~n' + 'XXX' + '~r~n' + '1-888-888-8888'
string filename
string filepathname
//create the path to use LATER for the attachment
#if defined PBWEBFORM then
filepathname = MapVirtualPath("c:\XXX-Detailed-" + trim(report_name) + "-" + random_number_string + ".pdf")
//create the path and filename to use NOW and save the file in the virtual directory
filename = "c:\XXX-Detailed-" + trim(report_name) + "-" + random_number_string + ".pdf"
long returncode
returncode = dw_1.SaveAs(filename,PDF!,false)
if returncode = 1 then
string subject
subject = "XXX Report-"+report_name
string fromaddresstext
fromaddresstext = "[email protected]"
System.Net.mail.MailMessage message
message = create System.Net.mail.MailMessage
message.subject = subject
message.body = bodytext
System.Net.Mail.MailAddress fromaddress
fromaddress = create System.Net.Mail.MailAddress("[email protected]", "XXX Operations")
message.From = fromAddress
System.Net.Mail.MailAddress toaddress
message.To.Add(user_id);
System.Net.Mail.Attachment attach
attach = create System.Net.Mail.Attachment(filepathname,"application/pdf");
//Helper.Mail.AddAttachment(message, attach)
message.Attachments.Add(attach);
System.Net.Mail.SmtpClient smtpclient
smtpclient = create System.Net.Mail.SmtpClient
smtpclient.host = "xxx.xxx.com"
smtpclient.port = 25
//smtpclient.send(message)
TRY
smtpclient.send(message)
CATCH (System.Net.Mail.SmtpException ex )
MessageBox( "SMTP Error", "Sorry. There is a problem sending the XXX email. " + ex.Message )
END TRY
mle_1.text = "XXX Report has been emailed to : " + user_id
else
mle_1.text = "Sorry, there was a problem generating the file."
destroy message
destroy smtpclient
end if
#end if -
How to configure standard report concurrent program in web forms.
I have developed new custom report using reports6i, and defined a concurrent program registered into AOL and assigned to a request group. I tested the report runs fine from form based applications. But user wants to run this new report from web forms(Incentive Compensation). I have no idea how to create a concurrent program link in the Incentive compensation module web forms.
Is there any document to configure oracle report concurrent program into web forms?
or guyz please send me the steps (screen shots) to add custom report concurrent program to web forms?
Please help guyz...I'm new to web forms......
Thanks in advance
Naveen
[email protected]Naveen,
On some event on the page (like a button submit) you can call a PLSQL API with parameters which can further submit your concurrent Request.
If you want to see the Report output in Apps, it can be done directly. Otherwise if you want to see the value in the Self Service Page itself, then you can extend the oracle.apps.fnd.cp.request.server.RequestSummaryVO for your case.
Thanks
Sumit -
Add logic to Submit button in web form
We have created a form from scratch in FormsCentral. It has a fair bit of logic associated with questions in the application form.
Some of the logic leads to the end result that an applicant should not be able to submit the form.
The issue is, that as a web form - no matter how much logic we put up front to determine whether the applicant should continue flling out the form OR whether they can or cannot submit a form - the only option to get them out of the form (apart from Warning text "you cannot complete this submission online, please contact our call centre'.. sort of thing OR hoping that they press back on their browser OR click on another page in the website) is the appearance of the action buttons BACK and SUBMIT buttons.
This results in a partially filled out response appearing in the response table and/or the email notification etc.. causing extra work for receiver - as they need to ensure teh applicant is aware that the form submission does not constitue a successful submission.
Any options for us here in FormsCentral? (can we apply logic to the Submit button to Not Submit?)
(or is it only something that can be solved through scripting logic into buttons on an Acrobat form?)
Look forward to your response.In a web form it is not possible as you found with skip logic, and there isn't a way I can think to accomplish that.
In PDF you could edit the script on the submit button - very carefully so as not to break submit when the form has been filled out correctly, and test it well after editing. Here is some information on editing a FormsCentral PDF: http://forums.adobe.com/docs/DOC-3661
Thanks,
Josh
Maybe you are looking for
-
How do you define what machines will get an IP form your Lion DHCP server?
I have set up a Mac Mini Lion server for use in my classroom. I currently have 8 macs that are connecting to it. I would like my Lion server to serve IPs to these 8 macs, so I have set up the DHCP server to assign these. When I look at what machines
-
Oracle Enterprise Manager 11g is not running
Hi everyone. I can't open my Enterprise Manager in my browser. when I am typing this command "emctl status dbconsole",it gives me this error : C:\Windows\system32>emctl status dbconsole Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.
-
Dreamweaver 8 help with aligning Layers
Hi all I am completely stuck I want my layer AP (tag) to display in the center of my browser and any browser it displays in????? I need help please I don't know how to set this to the center using CSS Thanks
-
T22 - how much O/S updating is possible?
Hi all, newbie to the forum here, and it's a great resouce! My question deals with my T22 (2647-8CU) running Win2000 Prof'l. It was my work machine prior to retirement, and I got to keep it when I left my job. That was 6 yrs ago, but it still runs
-
Duplex backup: getting one copy to complete
Using Oracle 10g R2. I am trying to set up a tape backup with 2 copies in a highly available environment. The media management software (IBM TDP for Oracle) is configured so that the copies are written to separate tape libraries. If one of the librar