Tester: tests a View with bind params?

Test a View with the right click on the AM, Test, that has
bind params?
After much searching the Help and this forum, I can't find the
post that explained how to wrap another View to front end a
SQLView/View with bind params.
Thanks, curt

Just as I posted this I thought of the search string that worked.
I searched on "bind param" and oddly only one page of hits and
the explanation on how to create a ViewHolder and ViewLink to
front end a View with bind params and then to test it is in
this message:
Re: Getting message failed to load the following objects when opening any fmb
curt

Similar Messages

Detail view with bind variable. TreeTable not showing all detail result.

I’m having trouble with treeTable using detail view with bind variables and where clause defined in VO definition.
Both, master and detail view objects, base on the same entity and have the same condition in where clause. The view objects also have bind variables, which are set in prepareRowSetForQuery() method.
Again, these are two different views, that get different result, based on value of one of the bind variable.
When I show results in two different tables on jsf page, where master table has "RowSelection" set on "single", all results are displayed in detail table.
But when I use treeTable, only the first result of the detail is shown.

I tested it in applicationModule and it works, but i think that's the same as two tables on a jsf page.
This is the order in which overridden methods are called in ADF BC or two tables on jsf page
when clicking on row in master table.
PrepareRowSetForQueryDetail
executeQueryForCollection_Detail user param: 2
   Object 2: class [Ljava.lang.Object; -> print of the object2[] parameter in executeQueryForCollection
     List 0: Bind_ChildId -> viewLink parameter
     List 1: 400035313 -> viewLink parameter value
getEstimatedRowCount_Detail
count: 2
getEstimatedRowCount_Detail
count: 2 And when i click on "expand node" in tree table:
getEstimatedRowCount_Root
count: 2
PrepareRowSetForQuery_Detail
executeQueryForCollection_Detail user param: 2
   Object 2: class [Ljava.lang.Object;
     List 0: Bind_ChildId -> viewLink parameter
     List 1: 400035321
PrepareRowSetForQueryDetail
executeQueryForCollection_Detail user param: 2
   Object 2: class [Ljava.lang.Object;
     List 0: Bind_ChildId -> viewLink parameter
     List 1: 400035313
getEstimatedRowCount_Root
count: 2
getEstimatedRowCount_Root
count: 2
getEstimatedRowCount_Root
count: 2
PrepareRowSetForQueryDetail
executeQueryForCollection_Detail user param: 2
   Object 2: class [Ljava.lang.Object;
     List 0: Bind_ChildId -> viewLink parameter
     List 1: 400035313
PrepareRowSetForQueryDetail
executeQueryForCollection_Detail user param: 2
   Object 2: class [Ljava.lang.Object;
     List 0: Bind_ChildId -> viewLink parameter
     List 1: 400035321
getEstimatedRowCount_Root
count: 2
getEstimatedRowCount_Root
count: 2Values of user parameters are OK. Is there another method that i should override?
I also noticed, that if detail view doesn't have user bind variables, the tree works fine and is shown even in ADF BC (aplication module).
I guess we loose a tree, when using bind variables in detail view object.
Is there a way around it?

View with Bind Variable and ADF table

Hi all,
Please note what i have noticed. I created a view with a bind parameter, overriden the prepareSession of my Application Module to set the bind parameter and execute the query. I then created a simple jsf page and included the view as an adf read-only table. When i run the page, the prepareSession is called, sets the bind parameter, however the selected record of the table is always the second record (Not the first record).
This behaviour can be reproduced with the HR schema. Please follow the below instructions for reproducing the problem.
1. Create a Fusion Web Application (ADF).
2. Create business components from tables.
3. Create a new connection with the HR schema.
4. Import the Departments table as an entity and then click finish.
5. Create a view based on the Departments entity.
6. Modify the Query to include a where clause (where DDepartmentsEO.DEPARTMENT_NAME LIKE :BindParam)
7. Provide an order by clause (DepartmentsEO.DEPARTMENT_ID DESC)
8. Creata a bind variable named "BindParam" of type string.
9. Create an Application Module and include the view object.
10. Open the Application Module Class and override the prepareSession method
11. include the following code after super.prepareSession(session):
ViewObject myView = this.getDepartments1();
myView.setNamedWhereClauseParam("BindParam", "%");
myView.executeQuery();
12. Create a jsf page
13. Drag the view object on the page as an adf read-only table, selecting the Row Selection, Sorting and Filtering
14. Run the page.
You will see that instead of the first record being selected, the second record in the table is selected.
Can anyone please help me?
Thank you

First of all i would like to thank you for replying to my thread.
Secondly, i would like to inform you that the example that i have provided is just for REPRODUCTION purposes.
The real scenario has to do with setting the where clause with the authenticated user so that the view will query for data only associated with the authenticated user.
The only way to overcome this behaviour is to include a view action (namedWhereClause in the page definition)
However, this is not how i want to implement this. This was working properly in 10g

XSQL ERROR with bind-params in ref-cursor-function

Hi Steve
I always get the error
ORA-01006 bind variable does not exist
when using a bind variable in a <xsql:ref-cursor-function> action element.
when I replace the bind variable with a @ - parameter substitution, all works fine.
My configuration:
XSQL 1.0.4.1 on Win200Pro ,Apache + Jserv + DB from ORA 8.1.7 installation
My Source
<xsql:ref-cursor-function
dbconn="ekat"
eblike="%"
list="a0"
bind-params="eblike"
include-schema="no"
null-indicator="no"
id-attribute=""
fetch-size="500"
>
{@dbconn}o.ekatkategcv.open_cv_ebh ('{@list}', :1)
</xsql:ref-cursor-function>
( dbconn selects my schema, not changed often, which contains package ekatkategcv with
function open_cv_ebh returning a cursor)
Any fix would be appreciated to avoid reparsing on each call.
BTW, is it right, that a ref-cursor funtion is reparsed whenever the content of
a parameter used with @ changes?
Best regards
H.Buschmann ([email protected])
null

I have tried it using ? instead of :1, this method works fine.
I haven't tried the name method (:bindvar) yet.
Until now, I only used xsl:query and xsql:ref-cursor-function, so I didn't check
the other action handlers with bind variables like :1
null

JDev11g : Problem with Binding param (viewcriteria)

When I bind some variables (2 type number and 2 type date) to viewCriteria and start the web site I get very strange problem.
The Binding param is almost random (I set on binding variables Binding position), and because of this I get constant SQL errors (Invalid type and so on).
Some data from server log
First start of server:
[ pre]
[8945]Binding null of type 12 for 1
[8946] Binding null of type 12 for 2
[8947] Binding param 3: 41
[8948] Binding null of type 12 for 4
[8949] Binding param 5: 148
[8950] Binding param 6: 148
[8951] Binding param 7: 148
Second start of server:
[9213] Binding null of type 12 for 1
[9214] Binding null of type 12 for 2
[9215] Binding null of type 12 for 3
[9216] Binding param 4: 41
[9217] Binding null of type 12 for 5
[9218] Binding param 6: 148
[9219] Binding param 7: 148
[9220] Binding param 8: 148
[ pre]
And view criteria query looks like this :
FROM_DATE (binded to variable fromDate_bind type DATE and binding position set to 1)
TO_DATE (binded to variable toDate_bind type DATE and binding position set to 3)
WORKER_ID (binded to variable worker_bind type NUMBER and binding position set to 2)
CLASS (binded to variable class_bind type NUMBER and binding position set to 4)
[ pre]( ( ( ( FROM_DATE >= ? ) OR ( ? IS NULL ) ) AND (WORKER_ID = ? ) AND ( ( TO_DATE <= ? ) OR ( ? IS NULL ) ) AND ( ( CLASS = ? ) OR ( ? IS NULL ) ) ) )
This viewCriteria is shown on page as af:query (simple search form) and outputs results on af:table.
Is there any way to solve this random parameter binding?
Rok Kogov&scaron;ek

check out the fileUpload article
Using the File Upload Component
http://developers.sun.com/prodtech/javatools/jscreator/learning/tutorials/2/file_upload.html

Can I use a VO with Bind Params as an LOV?

And if so, how can I specify the values to be used for the Bind Params at runtime?
I am trying to think outside the box for dependent dynamic lists...
Thanks.

A little more info...
I have tried adding an Action to my pageDef Bindings:
<action IterBinding="DelegationsWithScopeTypeParamIterator"
id="ExecuteWithParams1"
InstanceName="EVCServiceDataControl.DelegationsWithScopeTypeParam"
DataControl="EVCServiceDataControl" RequiresUpdateModel="true"
Action="95">
<NamedData NDName="ScopeTypeIdVar" NDValue="${userState.currentType}"
NDType="oracle.jbo.domain.Number"/>
<NamedData NDName="CurUserIdVar"
NDValue="${sessionScope.userState.currentUserId}"
NDType="oracle.jbo.domain.Number"/>
</action>
And an invokeAction to the Executables:
<invokeAction id="ReloadScopeList" Binds="ExecuteWithParams1"
Refresh="prepareModel" RefreshCondition="true"/>
Now, how do I get ReloadScopeList to do its thing when a user selects a value in one selectOneChoice list so the second selectOneChoice list's iterator will be updated? Am I crazy?
Thanks,.

ExecuteWithParameter with Binds on several view objects

I thought I knew how to do this, but it has been a month or two, and can't seem to get the syntax right. I would really appreciate some guidance on this.
I'm using jdev 11 to create a basic page using ADF Faces. In the model, I have three seperate read only view objects based on queries I created in SQL Developer. I also have two lookup tables for use in LOVs to display names for IDs. In one of the views, I added two LOVs for id columns. I have one more lookup that displays name, id for Tech's.
All three views have the same named bind variable - :TechID
What I want is to have a single select box that displays the name column from Tech that will return the ID for TechID. When the user clicks the ExecuteWithParms, all three views should be refreshed and re-queried with the new bind value, and display the results. To see this work, I have been working with readonly tables, but eventually hope to use graphs for the three views.
Here is the general layout that I am trying to achieve.
Select One Choice (List of Techs with display set to name, and the return set to ID)
ExecuteWithParams button. Currenly have table1, table2, table2 in the partialtriggers field.
table1
ViewObject1 that has a named bind of :TechID
table2
ViewObject2 that has a named bind of :TechID
table3
ViewObject3 that has a named bind of :TechID
This seems like it should be easy to setup. Can this be done declaratively, or do I need code. If I need code, can I get a few hints?
Is there an example that has something similar that I can gleen how to accomplish this?
Thanks, Ken

Timo et al,
I still can't seem to get this to work. I finally worked through a problem with JDeveloper working (Feels like it has been April 1st for a week straight! (American Humor)). In trying to simplify this, I am asking if someone can create the following example use case based on the HR schema. I'm not asking for a paper, just 15 or so minutes from someone that is good at this to create a working example. Also, send me a zipped copy of the project, or make it available on your blog or other downloadable location.
Thanks for any help with this to really understand how to get JDeveloper to work for me.
Here are the specifics for a Highly desired example:
This is based on HR schema.
Read Only View Objects
-- LOCATION_LKUP
select
(street_address || ' ' || city || ', ' || state_province || ' ' ||to_char(postal_code) || ' ' || country_id) as location_name,
location_id
from
locations
order by country_id, location_name;
-- ViewObject DepartmentStuffView
select *
from departments
where location_id = :LOC_ID;
-- ViewObject EmployeeStuffView
select * from employees
where department_id in (select department_id
from departments
where location_id = :LOC_ID);
-- Modify the AppService and ViewObjects to expose Java code to
-- modify the (name)Impl.java file
AppService Code
public void updateViews(String locationID) {
 // Get a reference to the ViewObjects
DepartmentStuffView vo1 = (DepartmentStuffView) getDepartmentStuffView1();
EmployeeStuffView vo2 = (EmployeeStuffView) getEmployeeStuffView1();
 // Now have each view object requery itself with the new parameter
vo1.updatewithParam(locationID);
vo2.updatewithParam(locationID);
ViewObject Code
-- In both ViewObjects
-- (DepartmentStuffViewImpl.java and EmployeeStuffViewImpl.java),
-- add the following code at the bottom
public void updatewithParam(String locationID) {
 setTechID(locationID);
 executeQuery();
Layout:
Location Name: ComboBox <== Displays LOCATION_NAME, Returns LOCAION_ID
<Run Report> <== Button to run the process
Table1
The view object DepartmentmentStuffView
Table2
The View Object EmployeeStuffView
Expected Behavior:
Change the location in combo box and press the run report button.
The data in both views with bind variables get updated.
Extension:
Page can have search with multiple filters. The AppService can control
which views get updated with which values depending on selections. Common
use case.
Thanks so much, Ken

How to test or view data if the source is XML files..?

Hi,
I just got a doubt..
How can we test or view data from BI Admintool if the source is XML files.
If it is database we can perform "Update Row Count" or "view data" from physical layer.
I am just going through the "sample sales" example and could not find the option to test
connectivity with xml file..(I can see the directory which points to samplesales and xml files..
but how can I view those data in BI admintool)..
Help would be appreciable..
Thanks and Regards,
Sri.

Hi Sri,
Yes, this option is not available for XML and multidimensional sources. Check "Show row count in physical view" in Table 2-1 documented here ,
http://docs.oracle.com/cd/E21764_01/bi.1111/e10540/planning.htm#BABEFIHE
Rgds,
Dpka

HP link is broken for checking tested pc's with Windows 10

When you go here http://support.hp.com/us-en/product/HP-ENVY-Phoenix-810-400-Desktop-PC-series/7477706/model/7485498/document/c04758308/ Click on "Alert" top right corner and then "View Article" And then click the link here http://www.hp.com/windows10upgradenow The link is broke and you cannot see what systems HP tested drivers for with Windows 10.

yeah I also noticed that. I went on chat support and asked for a case manager to call me back so I can complain about it because was st*p*d as a rock, didn't understand anything I told him although I forwarded him the exact link to try and see for himself.. hopefully it will be fixed soon as I want to see if my laptop is eligible or not.

CodedUI Tests Fails Intermittently With Initialization Errors

I would like to re-ask the question asked in this thread:
https://social.msdn.microsoft.com/Forums/vstudio/en-US/855c561b-2100-4494-bf65-c5b9ec83e4af/inconsistent-coded-ui-test-behavior-depending-on-lab-size?forum=vsmantest
There was no answer given and no more replies coming in to that thread.
We are exactly in the same situation. We have large number of CodedUI test cases (500+) which runs daily. Some of the tests fails intermittently with the initialization failures. The details are:
ERROR MESSAGE
Error calling Initialization method for test class TEST_CLASS_NAME: System.Runtime.InteropServices.COMException: Error HRESULT E_FAIL has been returned from a call to a COM component.
ERROR STACK TRACE
Microsoft.VisualStudio.TestTools.UITest.Playback.Engine.IRPFPlayback.SetSkipStepEventName(String skipStepEventName)
Microsoft.VisualStudio.TestTools.UITest.Playback.ScreenElement.InitPlayback()
Microsoft.VisualStudio.TestTools.UITesting.Playback.Initialize()
Could someone please let us know what could be the issue of these intermittent failures?

Hi digitali,
According to your description, I would like to know the details:
How many agent machines in the lab environment?
What’s the details of these machines? (e.g. memory, system)
What’s the version of TFS, MTM, test controller and test agent?
Regards
Starain
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

TS3413 missing test after viewing about 5 minutes

I got two my mail address that outlook mail and gamil in my iphone. The problem is missing test after viewing about 5 minutes. I suprised that only outlook mail, gmail is still maintained. Please advise solution!!!

It sounds like some problem with the source of your outlook mail. I don't know of any way you could fix it from your end.

Kisight: FAQ 1: Want to Test your iSight With Another Person? (replacement)

Original
kisight: FAQ 1: Want to Test your iSight With Another Person?
Suitable for iChat 2.x and iChat 3
This FAQ follows on from EZ Jim's "How To Ensure Your iSight Is Functional"
Testing with Another User
This FAQ presumes you have done the preliminary tests in EZ Jim's FAQ and can see yourself in the Preview windows of iChat.
If your iSight works and you want to test your ability to connect iChat AV for instant messaging, see the iChat AV FAQs for further help.
Apple runs three AIM names:-
appleu3test01,
appleu3test02 and
appleu3test03 are available as Autoresponders. (They answer your call and start to show Video (adverts).
They will accept invites from iChat 2.x, iChat 3, the AIM application on a PC and Trillian also on a PC.
See Table 1 here for clarity
In Addition to these there are several people who post regularly in the iChat and iSight discussion areas who may offer their help. See the list below.
Other people put their details in their Apple profiles which you can see by clicking on their name on the left of any post.
Please be aware of Time Zone differences.
Current Known test users (Be polite and Text a request first).
Rather than post iChat names on a page that could possibly be trawled for info, I linked the list to peoples profiles.
Ralph Johns (UK) See under "Biography" in new Discussions Profile. Using Tiger (iChat 3 Panther at 10.3.9 possible still) Can also host 4 ways
EZ Jim By invite on the Boards only
Defcom (UK) From New Disussion Profile. Using Tiger (iChat 3)
Ryan Mathus New DIscussion Profile. Maryland.
ChrisBel New Discussions. Please note the @mac reference (Paris).
James A. Weston New Discussions Profile. California (Please Text first. Has PCs and Macs. Mac on Tiger and an Intel Mac.
Jeremy Varner Pennsylvania On Tiger
John Holt In Austailia.
See More about their Whereabouts and abilities to test here in Table 2
The people who have offered to be testers have put their iChat details in their profiles.
The Links are to prevent Trawling.
From there you can copy and paste them into the Add Buddy set up screens to put them in your Buddy list. Please note you need to select the correct account type when adding a Buddy.
To start a chat can be done in four ways.
1) Double click the green camera icon next to the person's name in your Buddy list
2) Click the person's name once in the Buddy list and use the icon at the bottom of the Buddy List
3) Click the person's name once and use the Buddies menu items.
4) Right Click on a Buddy and use the Pop Up Menu.
3:54 PM Friday; March 30, 2007

Original
kisight: FAQ 1: Want to Test your iSight With Another Person?
Suitable for iChat 2.x and iChat 3
This FAQ follows on from EZ Jim's "How To Ensure Your iSight Is Functional"
Testing with Another User
This FAQ presumes you have done the preliminary tests in EZ Jim's FAQ and can see yourself in the Preview windows of iChat.
If your iSight works and you want to test your ability to connect iChat AV for instant messaging, see the iChat AV FAQs for further help.
Apple runs three AIM names:-
appleu3test01,
appleu3test02 and
appleu3test03 are available as Autoresponders. (They answer your call and start to show Video (adverts).
They will accept invites from iChat 2.x, iChat 3, the AIM application on a PC and Trillian also on a PC.
See Table 1 here for clarity
In Addition to these there are several people who post regularly in the iChat and iSight discussion areas who may offer their help. See the list below.
Other people put their details in their Apple profiles which you can see by clicking on their name on the left of any post.
Please be aware of Time Zone differences.
Current Known test users (Be polite and Text a request first).
Rather than post iChat names on a page that could possibly be trawled for info, I linked the list to peoples profiles.
Ralph Johns (UK) See under "Biography" in new Discussions Profile. Using Tiger (iChat 3 Panther at 10.3.9 possible still) Can also host 4 ways
EZ Jim By invite on the Boards only
Defcom (UK) From New Disussion Profile. Using Tiger (iChat 3)
Ryan Mathus New DIscussion Profile. Maryland.
ChrisBel New Discussions. Please note the @mac reference (Paris).
James A. Weston New Discussions Profile. California (Please Text first. Has PCs and Macs. Mac on Tiger and an Intel Mac.
Jeremy Varner Pennsylvania On Tiger
John Holt In Austailia.
See More about their Whereabouts and abilities to test here in Table 2
The people who have offered to be testers have put their iChat details in their profiles.
The Links are to prevent Trawling.
From there you can copy and paste them into the Add Buddy set up screens to put them in your Buddy list. Please note you need to select the correct account type when adding a Buddy.
To start a chat can be done in four ways.
1) Double click the green camera icon next to the person's name in your Buddy list
2) Click the person's name once in the Buddy list and use the icon at the bottom of the Buddy List
3) Click the person's name once and use the Buddies menu items.
4) Right Click on a Buddy and use the Pop Up Menu.
5:13 PM Thursday; April 5, 2007

I bought a iphone 4 from a guy on craigslist, I knew about ios 7.0 having the lock thing, but when I met him, his simcard was in the phone, I tested the phone with his simcard in from of him. The phone looked great with no problems and I even got the box

I bought a iphone 4 from a guy on craigslist, I knew about ios 7.0 having the lock thing, but when I met him, his simcard was in the phone, I tested the phone with his simcard in from of him. The phone looked great with no problems and I even got the box with the accesories, so I knew it was his... I then did the reset on the phone (erase all data... from settings) and it went through and activated and everything was good... I used the phone for about a month with no problems at all, even had my apple ID in the icloud and everything... well ios 7.0.6 came out and I used my computer to restore the phone, because I feel that the cord and computer gives it a better restore, it did great no problems, and when it went to the part where I went to activate the phone, I get a enter your apple id and password to complete activation... Wait... why is this up i thought, I thought I did everything like I suppose to to succesfully switch it to me, the new owner... but now its asking for some C******@yahoo.com.... I only have @gmail.com emails and none start with a C... The guy sold me the phone because he was switching to Verizon, and I tried to call him, and now the number is disconnected... I guess he switched to Verizon with a new number... Now im stuck with a paperweight that costed me $200.00... What can I do at this point... Please help me... I restored it to give it to my Step Son as I just got me the iphone 5... Thank you for ANY HELP in advance... Thank you again.

I bought a iphone 4 from a guy on craigslist, I knew about ios 7.0 having the lock thing, but when I met him, his simcard was in the phone, I tested the phone with his simcard in from of him. The phone looked great with no problems and I even got the box with the accesories, so I knew it was his... I then did the reset on the phone (erase all data... from settings) and it went through and activated and everything was good... I used the phone for about a month with no problems at all, even had my apple ID in the icloud and everything... well ios 7.0.6 came out and I used my computer to restore the phone, because I feel that the cord and computer gives it a better restore, it did great no problems, and when it went to the part where I went to activate the phone, I get a enter your apple id and password to complete activation... Wait... why is this up i thought, I thought I did everything like I suppose to to succesfully switch it to me, the new owner... but now its asking for some C******@yahoo.com.... I only have @gmail.com emails and none start with a C... The guy sold me the phone because he was switching to Verizon, and I tried to call him, and now the number is disconnected... I guess he switched to Verizon with a new number... Now im stuck with a paperweight that costed me $200.00... What can I do at this point... Please help me... I restored it to give it to my Step Son as I just got me the iphone 5... Thank you for ANY HELP in advance... Thank you again.

[svn:osmf:] 13357: 1) Modified a integration tests to correspond with the change to PluginInfo becoming a class .

Revision: 13357
Revision: 13357
Author:   [email protected]
Date:     2010-01-07 17:05:22 -0800 (Thu, 07 Jan 2010)
Log Message:
1) Modified a integration tests to correspond with the change to PluginInfo becoming a class.
2) Modified the DFXPParser class in the CaptioningPlugin to use the new TimeUtil class in the framework.
Modified Paths:
    osmf/trunk/plugins/CaptioningPlugin/org/osmf/captioning/parsers/DFXPParser.as
    osmf/trunk/plugins/CaptioningPluginIntegrationTest/src/org/osmf/test/captioning/TestCapti oningPluginInfo.as
    osmf/trunk/plugins/MASTPluginIntegrationTest/src/org/osmf/test/mast/TestMASTPluginInfo.as
    osmf/trunk/plugins/MASTPluginIntegrationTest/src/org/osmf/test/mast/managers/TestMASTCond itionManager.as

How to Test, Inbound idoc ,with out the Sender System, using a Text File

Hi Guru's .
we wanted to test BLAORD03 inbound idoc (Message Type BLAORD).with out the SENDER SYSTEM.
on the same client.
we wanted to test this idoc with text file from our local machine.
Can anyone give us detail steps.like how to create File layout
with Segment name,and values for the fields.how to pass this file to the system.
Thanks in advance.

Hi Aparna.
My requirement is to test the idoc with Inbound File.
Generate a file with the data entered through segments through we19 ,and use the same file for processing through we16.
when i am trying to do this syst complaing about
Partner Profile not available, and some times
port not available. and some times with
'No further processing defined'.
but i maintained part profiles and port perfectly.
Can you help me in testing with test 'File' port.

Tester: tests a View with bind params?

Similar Messages

Maybe you are looking for