Testing a mapping in OWG 10g R2

Dear all
I am rather new to OWB 10g, I have used 9i in the past.
In the previous version, if you would like to run a mapping, you could do that by using Oracle Workflow 2.6.
Could you please let me know how it is done in this version? Any decent documentation with real examples?
Many thanks

Hi,
You don't really need Workflow to run mappings, but if you want to add workflow logic then you need to use DBMS_SCHEDULER (where you create so called 'chains' (batches)) or use its GUI counterpart Oracle Workflow.
Here is a link to the 10gR2 Oracle by Example pages. We don't use Workflow (yet), so can't give you any real experience feedback.
http://www.oracle.com/technology/obe/10gr2_owb/owb10gr2_gs/owb/lesson4/etl-mappings.htm
You might know this one, but just in case, here is the link to the Oracle Workflow home page: http://www.oracle.com/technology/products/ias/workflow/index.html
grts, Ed

Similar Messages

Font mapping in Forms 10g on Unix/Linux

Hello,
does anybody have a adea how font mapping in forms 10g works on Unix/Linux.
As far as I know I do have to have a X-Server running on the node so that forms can mapp java fonts, is this true?
What configuration options do I have on the server.
Can I differ strictly between development tasks (consideration of developer) and admin tasks ([configuration]considerations of Application Server Admin) referring font mapping in forms 10g?
Is there any "Best Practices to this subject?
Thank you.
Regards
Frank

Hello Frank,
- fontmapping takes place in Registry.dat file?!
- According to your article "Forms: Using custom fonts in Oracle Forms Services 10g" I only have to customize fontmapping in Registry.dat file.
-Customer developes on MS-Client and uses Arial,but is surprised about displayed font, which is´nt Arial.
-Can I just customize font mapping in Registry.dat as follows (according your example)?
default.fontMap.appFontnames=x,y,Arial
default.fontMap.javaFontnames=u,v.Arial
What do we have to consider on client site?
What´s about java on client (JInitiator)?
Regards
Frank

Help : How to test interface mapping in n:1 scenario

I have a scenario two message interfaces==> one message interface.
Then I new one interface mapping, and choose two source interfaces, one target interface. Also filled the mapping program.
But when switch to the test tab, there is no display about the source and target message.
How to do the test in this kind of scenario?
Thanks a lot!
Edited by: kiki qin on Oct 28, 2008 2:24 PM

Hi
First check in Message mapping first if you have one.
Secondly when you select source or target message while developing message mapping did u get message like No objects found or something.
It should show either error or source message when you test interface mapping in any case.
Thanks
Gaurav

When I am testing java map in XI.every time connection to the XIserver lost

Hi All,
When I am testing java map in XI.every time connection to the XI server lost.XI is asking for login again
Can any one help me on this.what could be the problem
Thanks
Siree

I dont no whether problem with java code or XI .but its a very simple java code.
Just i am getting 6 Xpath values and comparing those values with "" OR Null.if the condition is true i am displaying some text message.
Sample Code
execute(in,out)
Xpath1
Xpath2
if("".equls(Xpath1)||Xpath1==null)
Textmessage = No value in Xpath1

Testing ABAP mapping

Hi,
 I have created one ABAP mapping class with the method IF_MAPPING~EXECUTE.I tried to test the mapping program in a report by passing the source(XML document as a string).The call to the mapping method is done as follows:
CALL METHOD CLASS1=>IF_MAPPING~EXECUTE
 EXPORTING
 source = sxml
 IMPORTING
 result = sxml1.
When I try to activate the above call, I get an error message which says that You can only use class=>method with static methods.This is happening in SAP WAS6.20.I understand that ABAP mapping can be tested in dynamic calls only in XI.
 So the only option left is to test the ABAP mapping in Integration repository Design -Interface mapping.When I include ABAP mapping class in the interface mapping and run the whole scenario,I get error message in SXMB_MONI.
Is there an easy way out to test the ABAP mapping than including it in the Interface mapping?If you have some ideas,please inform.
Thanks in advance,
S.Banukumar

Hi Chris,
 Thanks a lot.I have corrected the name space as ns instead of ns0.I have done the Design and Directory setting as suggested by you.Now I am getting the following error when I try to test my scenario in
SXI_MAPPING_TEST.
<?xml version="1.0" encoding="utf-8" ?>
- <asx:abap xmlns:asx="http://www.sap.com/abapxml" version="1.0">
- <asx:values>
<ERROR href="#o97" />
</asx:values>
- <asx:heap xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:abap="http://www.sap.com/abapxml/types/built-in" xmlns:cls="http://www.sap.com/abapxml/classes/global" xmlns:dic="http://www.sap.com/abapxml/types/dictionary">
- <cls:CX_XMS_SYSERR_MAPPING id="o97">
- <CX_ROOT>
<TEXTID>579DFEE1FC5AF24F9C83617A696DC539</TEXTID>
<PREVIOUS />
<KERNEL_ERRID />
- <INTERNAL_SOURCE_POS>
<PROGID>160</PROGID>
<CONTID>650</CONTID>
</INTERNAL_SOURCE_POS>
</CX_ROOT>
<CX_STATIC_CHECK />
- <CX_XMS_SYSTEM_ERROR>
<ID>APPLICATION_PROGRAM_ERROR</ID>
<P1>$TMP.BOOKINGTOMSG</P1>
<P2>R3_ABAP</P2>
<P3>UNCAUGHT_EXCEPTION</P3>
<P4 />
<INFO />
<CATEGORY />
What could be possible reason for the exception?Do I need to give the name space for the ABAP mapping name when I include it in the Interface mapping?
Thanks,
S.Banukumar

No namespace tag in target message (Test Interface mapping)

Hi,
I'm doing a IDoc to file scenario, and I'm using external definitions and a XSLT mapping. When I try to test the mapping in Interface Mapping he maps it but I can't see the tree view, I only get the source code...
<?xml version="1.0" encoding="utf-8"?>
<SenderID/><ReceiverID/><DocumentDate>20051028090653</DocumentDate>
<DocumentNumber>456184</DocumentNumber><TestIndicator> P</TestIndicator>
<Version>1.0/SSCC</Version>
<Desadv><MessageReferenceNumber>81749973</MessageReferenceNumber></Desadv>
I presume that there is a namespace tag needed like
<ns:Desadv xmlns:ns="http://www.certione.com/RFDesadv/Schema">
but I don't know what to do to have it added to the target message which is external definition Desadv with namespace http://www.certione.com/RFDesadv/Schema in the XSD...
Any help would be appreciated!
Kind regards..
Message was edited by: Bart De Saedeleer

Hello,
Could you put your XSD definition ?
And check your mapping because it seems that you don't have a root node in output.
<?xml version="1.0" encoding="utf-8"?>
<MYROOTNODE>
<SenderID/><ReceiverID/><DocumentDate>20051028090653</DocumentDate>
<DocumentNumber>456184</DocumentNumber><TestIndicator> P</TestIndicator>
<Version>1.0/SSCC</Version>
<Desadv><MessageReferenceNumber>81749973</MessageReferenceNumber></Desadv>
</MYROOTNODE>
Regards,
Chris
Message was edited by: Christophe DUMONT

How to test credential Mapping

I have used the default adapter provided by the BEA n also made some services n
events working on it sucessfully, and also made a mapping between the remote user
n the WLS user in the WLI console.wat i want to know is how do i test the mapping
that i have established.
could u plz forward me the way to test this credential mapping
thanking u in anticipation
kirtan

Hi Ruby
What kind of scenario are you working on, IDOC to file, file to IDoc or what.
Depending on the scenario you have created, enter all the details such as Sender Service, Receiver Service etc in the transaction SXI_MAPPING_TEST (in your XI box).
The next step is for you to enter your source XML file, if it is a file to IDoc scenario enter your source xml file. If it is a IDOC to file scenario, then enter the XML payload.
And once you execute it you will be able to test your mapping and see if it successful or not.
cheers
Sameer

How to test ABAP Mapping

Hi,
In the Interface Mapping there is an option to test the
map. But it is not for the ABAP Mapping.
How can we test ABAP Mapping ?
rgds,
RM

Hi Ruby
What kind of scenario are you working on, IDOC to file, file to IDoc or what.
Depending on the scenario you have created, enter all the details such as Sender Service, Receiver Service etc in the transaction SXI_MAPPING_TEST (in your XI box).
The next step is for you to enter your source XML file, if it is a file to IDoc scenario enter your source xml file. If it is a IDOC to file scenario, then enter the XML payload.
And once you execute it you will be able to test your mapping and see if it successful or not.
cheers
Sameer

How to Access Table Space Map in Oracle 10g OEM

How and from where to Access Table Space Map in Oracle 10g OEM ??
Thanks

Hi,
first of all, the online help system of grid control is outstanding. Just click on Help in the upper right corner and enter "Tablespace Extent Map" in the search form.
Result:
Show Tablespace Contents Page
Each Oracle database is divided into one or more logical units called tablespaces. You can use Oracle Enterprise Manager to manage these tablespaces and create or modify the parameters for the tablespaces. Use the Tablespace property sheet to set general and storage information for the specified tablespace.
Use the Show Tablespace Contents page to display the list of tablespace segments that comprise the existing tablespace. You can display Tablespace Extents by choosing Show Tablespace Extent Map at the bottom of the page. An extent is a logical unit of database storage space allocation made up of a number of contiguous data blocks. One or more extents in turn make up a segment. When the existing space in a segment is completely used, Oracle allocates a new extent for the segment.
You can view segment extents by clicking on the link in the Extents column to display the Extents in Segments page.
You can display the Show Tablespace Contents page by choosing Show Tablespace Contents from the command drop down list on the Tablespace property page, the Tablespace View page, or the Tablespace search results page.
Note: Developers could only display the tablespace map to a maximum hard coded number of 30,000 extents. Tablespaces are often larger than that. If a tablespace is larger than 30,000 extents, the portion over that is displayed as Unmapped. To avoid exceeding the memory capacity of the tablespace map and to display the map without unmapped extents, use a search criteria displaying results of less than 30K extents.
For an overview of tablespaces, see the "Overview of Tablespaces " chapter of the Oracle Database Concepts Guide.
For more information about managing tablespaces, see the " Managing Tablespaces" chapter of the Oracle Database Administrators Guide.
For more information about managing datafiles, see the " Managing Datafiles and Tempfiles" chapter of the Oracle Database Administrator's Guide.

Access Table Space Map in Oracle 10g EM

From where can I access Access Table Space Map in Oracle 10g EM?
Thanks

From where can I access Access Table Space Map in Oracle 10g EM?
Thanks

Test ABAP Mapping

I have completed an ABAP mapping scenario (first time). I am not sure how to test the ABAP mapping. Does anyone have a detailed document on this?
Thanks
Skip Ford

Hi,
here is a blog about this topic:
/people/sameer.shadab/blog/2005/09/29/testing-abap-mapping
Regards
Patrick

How do i update & test import maps and syndication maps?

HI,
Can anyone guide me/ let me know the steps - how do i update & test import maps & syndication maps during upgrade in development system>
Regards,
Harmony

Hello Harmony
Different service packs SAP MDM 7.1 supprot the same Syndication and Import map format.
For Import map is updating you can use Import manager
For syndication map is updating - Syndicator
If your syndication and import map have been saved into repository just archive repository from your source landscape and unarchive it in destination.
If your syndication and import map haven't been saved in repository.
Exporting your maps to xml(syndication maps from syndicator and import maps from Import Manager) before migration and importing it to new repository.
According updating(modification) repository structure:
For Import map is updating you can use Import manager
For syndication map is updating - Syndicator
Another way(very exotic) - make changes in exported xml maps.
That's all
Regards
Kanstantsin Chernichenka

About how to build dynamic maps using jdeveloper 10g and mapviewer

i follow the guidance (about how to build dynamic maps using jdeveloper 10g and oracle application server mapviewer) to write a jsp file,but error take palce ,i get information "Project: D:\jdev1012\jdev\mywork\WebMap\ViewController\ViewController.jpr
D:\jdev1012\jdev\mywork\WebMap\ViewController\public_html\WebMap.jsp
Error(12,37): cannot access class oracle.lbs.mapclient.taglib.MapViewerInitTag; file oracle\lbs\mapclient\taglib\MapViewerInitTag.class not found
Error(12,190): cannot access class oracle.lbs.mapclient.taglib.MapViewerInitTag; file oracle\lbs\mapclient\taglib\MapViewerInitTag.class not found
Error(12,102): cannot access class oracle.lbs.mapclient.taglib.MapViewerInitTag; file oracle\lbs\mapclient\taglib\MapViewerInitTag.class not found
Error(12,28): cannot access class oracle.lbs.mapclient.MapViewer; file oracle\lbs\mapclient\MapViewer.class not found
Error(12,40): cannot access class oracle.lbs.mapclient.MapViewer; file oracle\lbs\mapclient\MapViewer.class not found
Error(13,37): cannot access class oracle.lbs.mapclient.taglib.MapViewerSetParamTag; file oracle\lbs\mapclient\taglib\MapViewerSetParamTag.class not found
Error(13,198): cannot access class oracle.lbs.mapclient.taglib.MapViewerSetParamTag; file oracle\lbs\mapclient\taglib\MapViewerSetParamTag.class not found
Error(13,106): cannot access class oracle.lbs.mapclient.taglib.MapViewerSetParamTag; file oracle\lbs\mapclient\taglib\MapViewerSetParamTag.class not found
Error(14,37): cannot access class oracle.lbs.mapclient.taglib.MapViewerRunTag; file oracle\lbs\mapclient\taglib\MapViewerRunTag.class not found
Error(14,188): cannot access class oracle.lbs.mapclient.taglib.MapViewerRunTag; file oracle\lbs\mapclient\taglib\MapViewerRunTag.class not found
Error(14,101): cannot access class oracle.lbs.mapclient.taglib.MapViewerRunTag; file oracle\lbs\mapclient\taglib\MapViewerRunTag.class not found
Error(15,37): cannot access class oracle.lbs.mapclient.taglib.MapViewerGetMapURLTag; file oracle\lbs\mapclient\taglib\MapViewerGetMapURLTag.class not found
Error(15,200): cannot access class oracle.lbs.mapclient.taglib.MapViewerGetMapURLTag; file oracle\lbs\mapclient\taglib\MapViewerGetMapURLTag.class not found
Error(15,107): cannot access class oracle.lbs.mapclient.taglib.MapViewerGetMapURLTag; file oracle\lbs\mapclient\taglib\MapViewerGetMapURLTag.class not found"
can you help?
greetings

I found a lot of information in document 133682.1 on metalink.
step by step example how to deploy a JSP business component application.

"XML not well-formed" error while testing Interface mapping.

Hello Experts,
I have a simple Interface mapping test, where a single input field of type string is mapped to a target Interface.
The content of a string actually will be a XML. I am using a XSLT mapping to convert string XML to XML. The XSLT mapping used by me is as :
<?xml version="1.0" encoding="ISO-8859-1" ?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:output omit-xml-declaration="yes" />
<xsl:template match="@*|node()">
<xsl:copy>
<xsl:apply-templates select="@*|node()" />
</xsl:copy>
</xsl:template>
<xsl:template match="/">
<xsl:value-of select="//string" disable-output-escaping="yes" />
</xsl:template>
</xsl:stylesheet>
Test data to be used is :
<?xml version="1.0" encoding="ISO-8859-1"?>
<string>
<catalog>
 <cd>
 <title>Empire Burlesque</title>
 <artist>Bob Dylan</artist>
 <country>USA</country>
 <company>Columbia</company>
 <price>10.90</price>
 <year>1985</year>
 </cd>
 <cd>
 <title>Unchain my heart</title>
 <artist>Joe Cocker</artist>
 <country>USA</country>
 <company>EMI</company>
 <price>8.20</price>
 <year>1987</year>
 </cd>
</catalog>
</string>
My Target structure is like:
catalog
CD
 title
 artist
 country
 company
 price
 year
No matter what I input as a test data , I get the error as "XML not well-formed" while testing Interface mapping.
Please suggest what could be the reason for this error?
Regards,
Abhi.

Hi check your XSLT mapping in XMLY spy with test data,the out of the XSLT Mapping should be valid XML , then only you can see output in interface mapping.
Regards,
Raj

Key Mapping in Forms 10g

Dear All,
I have migrated forms 3.0 in unix to forms 10g in windows 2003 server.
In my older version, '+' key is mapped to do COMMIT. I want to map the same key in forms 10g. i tried the same in my frmweb.res. Pls find the mapping done by me below.
*107 : 0 : "Add" : 36 : "Commit"*
This works fine.
The Issue is ... My cursor is in a text item .... I entered some data and press " + " key to save. The data is saved but at the same time the data in the text item is erased and + is getting replaced in the text item. I dont want my data to be erased and replaced with "+" symbol.
How to map the "+" just for COMMIT and should not replace the data in the text item ?
Can anyone help me to solve this issue...
Thanks in Advance
Sharf

Unfortunately, sometimes the role of the developer is to educate the user/management what can/can't and should/shouldn't be done. If I were in your postition, I would make every effort to educate the user/management this this is a REALLY bad idea and encourage them to use the standard key mapping or use a modifed key mapping that uses just the F-Keys.
The problem you have to overcome is that you have to not only tell Forms to do something different when the '+' key is pressed, but you have to have a listener in your application that is listening for the '+' key and supress the '+' character. To my knowledge, this cannot be done with native Forms built-ins. You would have to write your own Java solution (JavaBean or Pluggable Java Component [PJC]) to suppress the '+'. I have found that if you can provide the user/management with a cost estimate associated with the effort needed to code a particular feature. Once they realize the level effort and more importantly the cost associated with coding a particular feature, they typically will change their mind and see reason.
I know this is not what you wanted to hear, but I hope it will help anyway. :(
Craig...
Edited by: CraigB on Aug 2, 2010 2:05 PM
Edited by: CraigB on Aug 2, 2010 2:07 PM

Testing a mapping in OWG 10g R2

Similar Messages

Maybe you are looking for