Testing in development system

I specify J2EE of NWDI as Development system, in order to test my scenario. A DC has been built and checked-in successfully from NWDS. However, I couldn't be able to launch the scenario with the url as indicated in application.xml. How can I check if my development has been transferred to CBS, and how to find out the problem here?
Thanks

Successful activation means that CBS built the DC(s) successfully.

Similar Messages

Service product replication for test and developement system

Hi Experts,
In our scanario service product is created in production system and later manually created in test and developement system.
Is there is any standard function module avilable to replicate the product master data into test and developement system
Or Is it possible to use the middleware functionallity to replicate the service product details.
Please advice on this issue.
Thanks,
Senthil .R
Edited by: Senthil Vadivelan R on Dec 17, 2007 3:46 PM

You can use the FindFile method in the TS API:
FindFile Method
Syntax
Engine.FindFile ( fileToFind, absolutePath, userCancelled, promptOption = FindFile_PromptHonorUserPreference, srchListOption = FindFile_AddDirToSrchList_Ask, isCommand = False, [currentSequenceFile])
The function itself returns a boolean which indicates if the file exists or not.
Then just use a Call Executable step to run command line string to delete the file.
Hope this helps!
jigg
CTA, CLA
teststandhelp.com
~Will work for kudos and/or BBQ~

Can we export the bdcrecording testing to development system?

Hi guys,
Can we export the bdc recording file testing system to development system? can we use that file in development system ?
Thanks in advance .
Moderator message: please try finding out yourself first.
Edited by: Thomas Zloch on Nov 9, 2010 11:40 AM

Yes you can. Atleast in a ECC 6 version.
Vikranth

How to find out if J2EE Engine is PROD or TEST or DEV System

Hi,
I want to get the system state / system type (even if si PROD or TEST or DEVELOP system) of the J2EE-Engine at runtime, because to use different properties.
How can I find this information and how can I get this info in Java?
Thanks for help.
Sven Rickelt
we use: SAP Web AS 6.40 SP 13 (Netweaver 2004)

Hi Gianluca,
one method I found is "to ask" System.getProperty("j2ee.dbhost") or System.getProperty("SAPSYSTEMNAME"), but I don't know if it is the right way.
So I must store the servernames in my properties (f.e.
dev=mypcname
test=testservername
a.s.o.)
but I think there must be a method to configure the server, that I can ask it and the answer is "PROD" or "TEST" and I not must know the servernames...
Best Regards
Sven Rickelt

For one Urgent Change during performing the Approval(chnging the status to 'To be Tested') system does not recognize any changes using the CTS WBS BOM in the development system. The transaction is therefore incorrect or the status was reset by the system.

For one Urgent Change while performing the one of the Approval before changing the status to 'To Be Tested'
We are getting below error.
The system does not recognize any changes using the CTS WBS BOM in the development system. The transaction is therefore incorrect or the status was reset by the system.
COuld anyone please help us to know, How it can be resolved?
We also have this below error.
System Response
If the PPF action is a condition check, the condition is initially considered as not met, and leads to another warning, an error message, or status reset, depending on the configuration.
If the PPF action is the execution of a task in the task list, and the exception is critical, there is another error message in the document.
Procedure
The condition cannot be met until the cause is removed. Analyze all messages in the transaction application log.
Procedure for System Administration
Analyze any other messages in the task list application log, and the entries for the object /TMWFLOW/CMSCV
Additional Information:
System cancel RFC destination SM_UK4CLNT005_TRUSTED, Call TR_READ_COMM:
No authorization to log on as a trusted system (Tr usted RC=0).
/TMWFLOW/TU_GET_REQUEST_REMOTE:E:/TMWFLOW/TRACK_N:107
For above error Table /TMWFLOW/REP_DATA_FLOWwas refreshed as well but still the same error.

If you are in Test System, you can use function module AA_AFABER_DELETE to totally delete the depreciation area (tcode SE37, specify chart of depreciation and depreciation area), After that recreate your depreciation area and run AFBN. But before you do that, have you created a retirement transaction type that limits the posting on your new depreciation area? If not create one.
Hope this helps.
Thanks!
Jhero

Transferring the application from development system to test system

Hi All,
I have developed Web Dynpro application in one system ( which is development system) as "Local Object" . Now i want to transfer the whole application to another system ( which is the test system) .Can anyone please tell me the steps needed to transfer it.
Regards,
Muzammil.

Hi Muzammil,
There are 2 ways.
1. open the local objects right click copy the WD component and provide a package which is not a temp. object and then you can transport.
Note: when you copy the application will not be copied.
2. in se80. go to other functions -> write transport entries -> relocation of object with package change -> Provide a package and a description a
and your component is ready to be transported...
Create application before transport..
Hope this helps
Regards,
Kinshuk

The tool for testing developed system

We have already developed a system base on WebAS.Is there some test tool for the developed system such as J Unit in Java?Thanks.

If your intentions is to test user interfaces or scenarios eCatt is the best choice. If you want to ensure code quality ABAP Unit and Code Inspector are suited well.
http://help.sap.com/saphelp_nw04s/helpdata/en/10/6d1c370c468b7be10000009b38f936/frameset.htm
Best Regards
Klaus

ESR role in different development, test, and production systems

Hello,
I want to know the role of ESR in development, test, and production system. Do I have to install ESR in every seprate installated SAP CE machine??? or should It be centrally and development., test and production systems can use it?? Does software release process effects in the whole landscape??
does Test and Production system requires ESR??? or all used services are embed into released software SCA files to test and production system???
Regards,
Naeem

Hey,
as far as I understood the ESR is a design time tool, i think you don't need to have a productive instance.
I think it should be installed on your PI systems. And I would prefer to have at least a devel and a test installation, to
separate services on test machines from those who are running on productive systems.
as you can't differentiate the services by their name but just by their systems, you should have separate ESR Instances.
Nevertheless I think it could be possible to run only one ESR....
Kind Regards
Christof

Transport request from development system to testing system

Hi,
I have collected necessary objects in (development) the transport request except 0DUNN_AREA infoObject .Because info object 0COMP_CODE is compounded with Info object 0DUNN_AREA and 0COMP_CODE is in revised version in development system (But available in active version in testing). Suppose I release that transport request from development system to testing system it get overwrite 0COMP_CODE in testing system?
Thanks

Hi Jk,
Depending the same technical names it will get overwrite in the testing server. But if the object 0DUNN_AREA is necessary in any objects which u have collected then u havce to collect it in the rtequest or else u will get RC8.
Khaja

Testing in QAS or Development System

Hi everybody,
I have created my Testpackages and assigned the users to them. The testing is already working fine.
Now I discovered that the STWB_WORK also exists in my development system but it does not show the testpackages.
What do I have to do to be able to test directly from there? And if I do, does it automatically transfer all the testdata back to the solution manager?
Thanks for helping
Miriam

Hi
I think you are confused with old R/3 test workbench by checking in ur R/3 or ECC system workbench.
pls ignore the same ...solman is to provide the centralised testing across the landscape whether it is for SAP or Non SAP products using ECATT/QTP or manual
That is why now they dont have to login to individual system for testing they just login to solman execute from here itself whatever the scenario may be...
I hope it is clarified
Regards
Prakhar
Edited by: Prakhar Saxena on Nov 23, 2009 3:38 PM

Transporting objects from Development System to Testing,Quality and Produtn

Hi Experts,
We have developed one scenario in our project in Development System.
Now we need to transport the same to Testing System and test it there and then transport to Quality system and after that to production system.
Can any one let me know what are all the steps required for transporting like
1) like wat are all the SLD changes to be done.
2) Do I need to create all the SLD settings of development in testing and Quality as well.
Also please let me know if there are any other things other than SLD settings.
Regards,
Pruthvi

Hi Pruthvi,
>But I didnt get a clear idea of what exactly needs to be done.
Please explain kindly what exactly you are missing or did not understand. If you just want to have an overview please read: [SAP help: Transporting XI Objects|http://help.sap.com/saphelp_nw2004s/helpdata/en/93/a3a74046033913e10000000a155106/content.htm]
Regards,
Udo

Using full development system on customized test setup that normally uses run-time - How to do?

I have 8.2 Full Development System (2 copies as there are two of us who write code).
I develop testing systems, each on an individual computer, each customized with a custom built (by me) interface to test and measure perfomance of motors produced on the production line.
In order to modify the program and test it, I have to replace the production set-up computer with my developmental computer, make the changes (and check that they work) and then make the run-time version for the production computer. THEN switch computers. Since I have nearly a dozen different setups, I cannot just make two production test sets of each (one for development and one for production).
Is there an easier way?
Perhaps with HDD in a drawer? But then I'd have driver and version issues.
Is it possible to run the full development system remotely (from the production setup)?
What about a site-license?
Thanks,
Tim K

From the 8.2 Release Notes:
Single-Seat and Multi-Seat Licensing
LabVIEW supports both single-seat and multi-seat licenses. Single-seat
licensing is the use of LabVIEW on up to three computers but by only one
user. Multi-seat, or volume, licensing is the use of LabVIEW on several
computers or by several users. Each seat using LabVIEW must have a valid
license from a license server. Refer to the National Instruments Web site at
ni.com/license for more information.
You are permitted to install LabVIEW on the the pc with the hardware, do the changes and debug, and re-build the app for production.

VISA Write differs between TS Development System and LV Run-Time Engine

Hi all
I made an application on LabVIEW to test BERs (Bit Error Rates), and I used VISA Write between two COM ports to exchange data.
Everything works fine using just LabVIEW.
Afterwards, I used TestStand to call my application (VI). The LabVIEW adapters from TestStand were set to Development System by default, and everything works OK!!
Finally, I needed to disable the development system, and set the LabVIEW adapters from TestStand to LabVIEW Run-Time Engine and I notice that the speed of the data exchange between the two COM ports decreased dramatically.
The only difference was the speed...because all the data (changed slowly in this case) arrived correctly on the other COM port too.
The symptom was the same as decreasing the baud rate...but the baud rate and all the other configurations remained the same. The only difference was the change between Develpment System to Run-Time Engine to notice this decreased speed between the exchanged data using VISA Write.
Any solutions for this?
Thanks in advance
Joao
Solved!
Go to Solution.

Joao,
you state that using the LV Developement System as execution platform for your LV code modules result in faster datatransfer between the COM ports than using the LV Run-Time Engine.
So i am pondering: Does this refer to TS at all?
Please check the following:
Run you communication using a sole LV application in LV Developement System. This should be fast. Now build an executable of this application and run that one. Do you see the same behavior?
If there is no difference in a sole LV approach, there have to be some settings in the TS approach making this slow. So please let us know:
Are there different modules involved in that data transfer (which in fact points to the reply Christophe made)?
What about loading/unloading options of the modules?
How big is the hierarchy of the modules, e.g. is it necessary for the RTE to load stuff the Dev Env has already in memory due to loading a lvproj.......?
Could you provide a simple example sequence+modules showing this behavior?
What versions of LV and TS are you using?
hope this helps,
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.

Error -17600 when switching from LabVIEW Development System to LabVIEW Run-Time Engine in Adapter Configuration

I receive an error message (code -17600) while loading my test sequence after switching from LabVIEW Development System (2009 f3) to LabVIEW Run-TIme Engine using the Adapter Configuration.
ErrorCode: -17600,
Failed to load a required step's associated module.
LabVIEW Run-Time Engine version 9.0.1f3.
When I switch back to the LV development system, everything is OK, and the sequence loads and runs perfectly.
My TestStand Engine Version is 2012 f1 (5.0.0.262).
I'd appreciate any help on this issue.
Roman

Hi Roman,
There are a couple of things you can try:
1) Determine if the LabVIEW RunTime Engine is corrupted in some way. Create a new simple VI with no sub-VIs, using the same LabVIEW Development system you used for mass-compiling the VIs. Create a TestStand step that calls this VI and ensure it runs correctly. Now switch your LabVIEW adapter to use the RuntimeEngine and choose the "Auto detect using VI version" option.
Check if the simple VI is loadable and runs without errors in TestStand.
If the step generates the same error, you should try a re-install of the LabVIEW development system.
If not, its most likely that there is some VI you are using that is not loadable in the LabVIEW Runtime Engine because:
1) Some sub-VI is still not saved in the right version or bitness. Open the VI heirarchy of the top-level VI that you are calling from TestStand and examine the paths of all the sub-VIs to check if they were in the folder you masscompiled and re-save any that are outside this directory.
Also, when you try to close the top level VI, do you get a prompt to save any unsaved files? If so, they could be the sub-VIs that are not saved in the right version. Save all of them.
Check if you are loading any VIs programatically and if these are compiled and saved in the right version as well.
2) There is some feature you are using in your LabVIEW code that is not supported in the LabVIEW RunTime Engine. To check this, add your top-level VI to a LabVIEW project and create a new build specification and create a new executable from this VI.
    Right-click "Build Specifications" and choose "New->Application(EXE)".
    In the Application Properties window, select Source Files and choose the top level VI as the start-up VI.
    Save the properties.
    Right-click on the newly created build specification and choose Build.
Run this executable (it will be run using the LabVIEW RunTime) and check if the VI has a broken arrow indicating that it cannot be loaded and run in the LabVIEW Runtime Engine.
You might need to examine your code and find the feature which is not supported in the LabVIEW RunTime and find an alternative.
Another thing i forgot to mention the last time around is if you are using 64-bit LabVIEW with 32-bit TestStand, then executing code using LabVIEW RTE from TestStand will not work since the 64-bit LabVIEW RTE dll cannot be loaded by the 32-bit TestStand process.
If none of the above steps resolve the issue, consider sharing your LabVIEW code so i can take a look.
Regards,
TRJ

License for testing and production systems

Hi Experts
Can any one help me out on implementing license in my B1 System.
According to our contract we have licensed following user types:
User Type
Licensed
AddOn Access License 25
Professional User 5
Software Development Kit - Development Version 20
We have Test/development system in one hardware and Production system on different hardware. Please advice me how to request/allocate license for my test/development system and production system.
We tried creating a Test System in SAP Market place and requested license for test system. While requesting license for production system, it is found that the license is exceeded. In other words, developent system license also counted.
Please advice me on the best practices of B1 license implementation.
Thanks and regards
Ajith G

Hi,
Our customer wants to Keep the production data secure. Developers and consultants should not have the access to it.
Then you have only two options:
1.Either you should maintain a standalone b1 server for the developers and consultants to test their solutions and scenarios.
2.Otherwise you can create users in sql studio for accessing only the test database.
So that as per your requirement
All configurations and sample data will be kept in a test environment where developers and consultants can do their work.Once everything is correct Admin will do the transfer to production.
Note:New users can be created in the sql studio under Databases-><Company Db>->Security->Users, Rt.click new user

Testing in development system

Similar Messages

Maybe you are looking for