Testing of transaction BD64?

Hi
Is there any place in SAP , where we can test our newly created Distribution Model (BD64) is working correctly or not?
Thank you

hi,
Here is the procedure for creation of ports and partner profiles.
Creation of port:
In WE21 tcode , place cursor on Transaction RFC and press create button. Popup opens. Select own port and give some name there. In right hand side pane, Give RFC destination.
( RFC Destination should be created in SM59 tcode. RFC Destination name is case sensitive.) and press SAVE.
Creation of partner profile:
I asked taken a scenario where we are sending data from client 800 to client 810.
Partner profiles have to be defined in WE20 transaction.
On left pane, Place the cursor on Partner Type LS and click on create button.
On the right pane, Give the partner no. (say BANG810) Partn type will be LS.
In Post processing: permitted agent.,
Typ US ( as you are transfering from one client to other client , giving US is ok)
Agent SAPUSER (its login user id)
Lang EN
Press Enter and Save.
Then, under the outbound parameters table control, you will find the + button enabled.
click on it and specify the message type, receiving port and idoc type and again save.
While creating partner profile in 810 client, go to WE20 , follow the same procedure as done in 800 client. But here as it is inbound system, we have to populate Inbound parameters. So, click on + button under inbound parameters. Give message type as MATMAS if you are transfering materials and give process code as MATM and press SAVE.
Regards,
Sailaja.

Similar Messages

Possible to test Dev Transaction with Production data in eCatt?

Hi,
I am new to eCatt but got the impression that it was possible to test your transactions in dev with the data in production, presumably through an RFC connection.
Is this at all possible?
Thanks,
Will

Hi Will,
with RFC your are right, but your direction of thinking is wrong.
eCATT lets you develop testscripts in one (central test) system and execute them in and against other systems.
Means, you can write your scripts in a Solution Manager and then execute it via RFC connections against ERP-development
or ERP test system with their specific ERP data.
Please take a look into the eCATT [Online Help|http://help.sap.com/saphelp_nw70ehp1/helpdata/en/d0/e3933f09a5fb47e10000000a114084/frameset.htm]
Hope that helps to understand better distributed testing.
Best regards,
Christoph

Transaction BD64 model distribution

Hello
I've made a refresh of the QA environment, and now I have to distribute a model in transaction BD64. This distribution is necessary because the Solution Manager environment controls the users in DEV and QA environment and because the refreh we need to distribute again this model through BD64.
Does anyone knows how can I distribute this model by Solman and transaction BD64?
Regards

Hi Sridhar
To select specific employees to CRM during initial load, you must fill the Object Parameter in PFAL transaction with only the specific Employee IDs that you need.
In BD64, you can especify inside de Distribution Model, some objects to filter the data you will send periodically, but this filters are not specific fields, but infotypes, Subtype, Object. Also you can add objects to filter by others fields with a BADI.
I recommend you, to read the Application help in PFAL transaction.
Regards
Edith

Error RZ783 when "Test" in Transaction SMLG

Hello together,
I have installated the "SAP Web Application Server 6.20 Test Suite" sucessfully.
By click on Button "Test" in Transaction SMLG (Tabstrip "Attributes") i get an Error:
Internal error (SIMULATION:INACTIVE_SERVER)
Message no. RZ783
Logon Group, Instance and IP-Adress are correctly filled. (I hope so)
Who knows the reason for this error ?
Best regards,
Erich Spannbauer.

I am facing the same type of problem. I refered the notes you said. At my side,
There is no entry in cyclical system programs.
In note is says-->
On every application server some ABAP/4 background programs are run at an interval of 5 minutes (rdisp/autoabaptime =300).
Where should I change this entry?
In my system,
There is no entry like
Program name |    |    Task
RSRZLST0      30s 120s    Operation mode control
RSRZLLG0      10s 120s    Login load distribution
RSALSUP1      15s 120s    Operating system alerts
RSALSUP2      15s 120s    Buffer alerts
RSALSUP3      15s 120s    Spool alerts
RSALSUP5      30s 240s    Database alerts (only on central appl.server)
Do I need to add them manually or it is auto generated?
The basic problem I faced and need to go in Basis details is now.
In SMLG trasaction, When I double click on Logon group and go to attributes and test,
It gives Internal error: simulation:Inactive server.
How to activate server ? I've no idea about Basis side. Please help
Regards,
Mehul
PS Points will be rewarded for helpfull answer

SAP_PROXY_ESR: Problem with the 'Connection Test' on transaction SM59

Hi,
I have a problem when eject the 'Connection Test' command on Transaction SM59.
I made the RFC Destination SAP_PROXY_ESR with:
Technical Settings
Conection Type: G
Target Host: my_host
Path Prefix: /rep
Service No: 1080
Logon Security
Basic Authentication: X
SSL: Inactive
SSL Client Certificate: DFAULT SSL CLIENT (Standard)
User: ers_user
Password: ers_password
Especial Option
No Time Out: X
HTTP Version: HTTP 1.0
Compression: Inactive
Compressed Response: YES
Accept Cookies: NO
I completed the transaction SPROXSET with:
IFR_ADDRESS             ESR_USER     http://my_host:1080/rep
IFR_PASSWORD     ESR_USER     esr_password
IFR_USER             ESR_USER     ESR_USER
In the transaction SM59 (RFC Destination SAP_PROXY_ESR) I'm making the 'Connection Test' but this command give the Message: ICM_HTTP_CONNECTION_FAILED.
In the program SPROX_CHECK_IFR_ADDRESS
Message: 'Cannot determine repository version'
Log_1- No vendor specified
Log_2- No vendor specified
I don't know the reason of this messaje.
I tried change the Service No. with others Ports but, the error is the same everytime.
Can anyone help me please?
NOTE: In my landscape, i dont have the Stack JAVA installed.
Thanks and Regards

But the Enterprise Services Repository is Java.
the /rep points to the folder of the Repository.
the ESR is part of SAP PI or CE.

ALE filters with transactions BD64 and BD21

I've created a filter for MATMAS IDOCs in my Distribution Model with BD64.
I expected it to create an IDOC when a material in a specific plant is changed (change pointers are active).
However, when I run transaction BD21 (RBDMIDOC) it still send ALL materials that have changed.
Any idea what I'm doing wrong.

After reading your message, I ran BD11.
Is that the transaction I should run to distribute the IDOCs.
I'm new to working with these transactions and I haven't done this before.
The system generated some MATFET idocs. But they have a failure status.
What I really wanted to do was prevent the generation of the MATMAS idoc in the first place.
Do I have to write a user exit for that?

Transaction to find ecatt test script

transaction to find ecatt test script and the table which stores ecatt test script
transaction to find function group and the table which stores function group
transaction to find general text and the table which stores general text
where i should be able to change the devlopment class

Hi Avinash,
For ecatts check development class/package SECATT_DDIC and transaction SECATT.
For general text transaction is SO10 and tables are STXH and STXL.
For Object Naviagtor SE80 you can change development class.
For function groups check ENLFDIR table.
All transaction codes are stored in TSTC and TSTCT tables
Thanks
Lakshman

Call transaction in test mode

Dear Folks!
Is there a way to do something like a call transaction in test mode?
What I need is to check the data of the file and return a log of the errors that this file would give if executed in call transaction, before executing it for real in the production environment.
Thanks in advance for any help.
Kind Regards,
Gilberto Li

Hello Gilberto
Yes, it is possible to run transaction in test mode using eCATT.
Here is the procedure for transaction ME21N (please note that this transaction has a "CHECK" button to validate the input data):
- First I created an eCATT testscript and chose pattern TCD (Record) with transaction ME21N.
- Within the recorded transaction I only entered the vendor and then pushed the CHECK button (-> popup appears with all messages)
- Next I cancelled the transaction without saving the purchase order and saved the recording within the testscript
- Then I surrounded the TCD recording with a MESSAGE...ENDMESSAGE block:
MESSAGE ( MSG_1 ).
TCD ( ME21N , ME21N_1 ).
ENDMESSAGE ( E_MSG_1 ).
Now if you run the testscript you will see all the messages collected thus far within the recorded transaction in the eCATT log.
I admit that this approach will not work for all transactions. However, it may be useful for testing many transactions.
Regards
Uwe

System Copy : Transactions sm59, we20, we21, bd64

Hi forum,
if you are to make a system copy, one system - as a rule QA - is overwritten by a production system. You can save
the RFC connections by consistently exporting (by use of brspace f.ex.) all table starting with rfc* and after the copy
you can reimport it. Same as for transactions we20 and we21. The tables in question are mentioned in note 181172.
But what can you do to export and later reimport the contents of transaction bd64 ???
Kind regards
OEggert2706

Hello,
Did you try the following option?
BD64--> Edit --> Model View --> Transport
Partner profiles are stored in the following tables. I think you can add these tables in a transport request, release it before refresh and import the same after refresh.
EDPP1: General partner profile
EDP12: Partner profile outbound, additional data NAST
EDP13: Partner profile outbound
EDP21: Partner profile inbound
EDIPHONE: Connection to SAP telephony (optional)
Thanks,
Siva Kumar
Edited by: Siva Kumar Arivinti on Dec 13, 2011 8:28 PM

How to transaction in the message driven bean?

 hello
 i write a message driven bean,that monitor the weblogic message queue,when a "Order"
 object is witten to the queue,the mdb get it and write it to a entity bean "Orderinfo".all
 of above logic is within the "onMessage" method of the mdb.
 i want to encapsulate the flow in a transaction,see my code snippet of the onMessage
 method:
 ObjectMessage objMsg = (ObjectMessage) msg;
 OrderVO orderVO = (OrderVO) objMsg.getObject();
 System.out.println(orderVO.booklist);
 OrderinfoHome orderinfoHome = (OrderinfoHome) ctx.lookup(
 "java:/comp/env/orderinfo");
 Orderinfo orderinfo = orderinfoHome.create(orderVO.orderID);
 orderinfo.setAddress(orderVO.address);
 orderinfo.setCustname(orderVO.custName);
 orderinfo.setEmail(orderVO.email);
 orderinfo.setBooklist(orderVO.booklist);
 orderinfo.setPrice(new BigDecimal(orderVO.price));
 and deploy descriptor snippet(ejb-jar.xml):
 <assembly-descriptor>
 <container-transaction>
 <method>
 <ejb-name>orderMDB</ejb-name>
 <method-name>*</method-name>
 </method>
 <trans-attribute>Required</trans-attribute>
 </container-transaction>
 </assembly-descriptor>
 i think during this transaction,there are two action:geting the object from the
 queue and saving it to entity bean.in order to test the transaction,i modify the
 jndi name of entity bean in the code to a WRONG one.redeploy my program,and send
 a message to the queue,the mdb is activated,then the exception is thrown because
 of the wrong jndi name.after that,i check the message queue,find that it is empty.why?i
 think if the second action of the transaction is fail,the transaction should roll
 back,the message should be send BACK to the queue.
 i also ty to use the "javax.transaction.UserTransaction" in the onMessage method,but
 the follwing exception is thrown:
 javax.transaction.NotSupportedException: Another transaction is associated with
 this thread.................................
 who can help me,if any wrong with me,and how to use the transaction with the message
 driven bean?
 thank you.


The transaction should rollback if the MDB throws an
 exception. Try changing your MDB code to
 call "setRollbackOnly()" on the EJB
 context (instead of throwing an exception) to see
 if that works. If calling "setRollbackOnly()" fixes
 the problem - then please contact customer support
 and report a bug.
 zbcong wrote:
 > hello
 >
 > i write a message driven bean,that monitor the weblogic message queue,when a "Order"
 > object is witten to the queue,the mdb get it and write it to a entity bean "Orderinfo".all
 > of above logic is within the "onMessage" method of the mdb.
 > i want to encapsulate the flow in a transaction,see my code snippet of the onMessage
 > method:
 >
 >
 > ObjectMessage objMsg = (ObjectMessage) msg;
 > OrderVO orderVO = (OrderVO) objMsg.getObject();
 > System.out.println(orderVO.booklist);
 > OrderinfoHome orderinfoHome = (OrderinfoHome) ctx.lookup(
 > "java:/comp/env/orderinfo");
 > Orderinfo orderinfo = orderinfoHome.create(orderVO.orderID);
 > orderinfo.setAddress(orderVO.address);
 > orderinfo.setCustname(orderVO.custName);
 > orderinfo.setEmail(orderVO.email);
 > orderinfo.setBooklist(orderVO.booklist);
 > orderinfo.setPrice(new BigDecimal(orderVO.price));
 >
 >
 > and deploy descriptor snippet(ejb-jar.xml):
 >
 >
 > <assembly-descriptor>
 > ............
 > ...........
 >
 > <container-transaction>
 > <method>
 > <ejb-name>orderMDB</ejb-name>
 > <method-name>*</method-name>
 > </method>
 > <trans-attribute>Required</trans-attribute>
 > </container-transaction>
 > </assembly-descriptor>
 >
 >
 > i think during this transaction,there are two action:geting the object from the
 > queue and saving it to entity bean.in order to test the transaction,i modify the
 > jndi name of entity bean in the code to a WRONG one.redeploy my program,and send
 > a message to the queue,the mdb is activated,then the exception is thrown because
 > of the wrong jndi name.after that,i check the message queue,find that it is empty.why?i
 > think if the second action of the transaction is fail,the transaction should roll
 > back,the message should be send BACK to the queue.
 >
 > i also ty to use the "javax.transaction.UserTransaction" in the onMessage method,but
 > the follwing exception is thrown:
 >
 > javax.transaction.NotSupportedException: Another transaction is associated with
 > this thread.................................
 >
 > who can help me,if any wrong with me,and how to use the transaction with the message
 > driven bean?
 >
 > thank you.
 >
 >

E-recruitment 600 URL/BSP Initial set up - Standalone Test system(ECC 6.0)

Dearest experts
At the very cusp of setting e-recruitment up. I have followed SAP note 890357 min configuration.....
The BSP for e-recruit upon test via Transaction SICF do not work, apart from the odd one EG. hrrcf_emp_page
URL's error when created via SE38 RCF_GENERATE_URL. I have set roles, users etc. I know some services require the assignment of a 'service user' eg registration (does anyone know all of them??).
Technical settings>user interfaces>settings for user interfaces with BSP>Start pages - there is no configuration here is this why the start pages are not firing up??
Can anyone let me know what config I have missed and is incomplete?? Where to check in the IMG??
Thanking you in anticipation
Kindest regards
R

Hi Deepak
thanks for your response.
I had already created a service user (which I had specified in the hrrcf* 1. to 8.)
I hadn't created a candidate and duly did so at your suggestion.
Error message as follows:
The error occurred in program CL_HRRCF_ABSTRACT_CONTROLLER==CM001 line 56
Message no. HRRCF0001010
Diagnosis
The system detects a technical inconsistency.
System Response
The operation will be terminated.
Termination takes place in:
Main program: CL_HRRCF_ABSTRACT_CONTROLLER==CP
Subroutine: CL_HRRCF_ABSTRACT_CONTROLLER==CM001
Line in source code: 56
Procedure for System Administration
Check the context in which the error occurs.
Since it is probably a program error and not an input error, you should contact SAP.
The error occurred in program CL_HRRCF_CAND_REG_A===========CM002 line 17
Message no. HRRCF0001010
Diagnosis
The system detects a technical inconsistency.
System Response
The operation will be terminated.
Termination takes place in:
Main program: CL_HRRCF_CAND_REG_A===========CP
Subroutine: CL_HRRCF_CAND_REG_A===========CM002
Line in source code: 17
Procedure for System Administration
Check the context in which the error occurs.
Since it is probably a program error and not an input error, you should contact SAP.
I have created one service user and applied to each of these bsp's.....is this correct??
I also created my own role (copied SAP_RCF_UNREGISTERED_CANDIDATE)
I am at a loss..............
As I also have the following error message:
Customizing table T77RCF_sp_ID contains no corresponding entry for [0000]
Message no. HRRCF0001014
Diagnosis
The system accesses Customizing table T77RCF_sp_ID using parameters [0000]. There are no entries in the table for this.
Either a program error or an error in Customizing exists.
System Response
The operation will be terminated.
Procedure for System Administration
Check the entries in table T77RCF_sp_ID for completeness.
Contact SAP if necessary.
Kindest Regards

Pr00 missing in webui while creating the transaction in ui

Hi
we have the scenario in crm like opportunity management , quotation analysis where in pr00 condition we have to input .
pr00 condition is mandatory in all the transactions in crm . for this reason pr00 we maintained as mandatory in the pricing procedure and we replicated all the pricing procedures in to crm . and when we tested a transaction in SAP GUI system is giving message as "PR00 is mandatory " and we are going in to item conditions tab and we are entering the pr00 manually .
But the same when we are trying to configure on webui , we added all the fields of gui in to webui by searching the components . and when we run the transaction in webui , system is giving the message "pr00 is mandatory"and when we go into pricing details tab , there is no pr00 in the price type drill down . i cannot input manually the proo in webui , i have to select it form drop down list only . but which is not appearing .
please suggest

issue solved

Is my test suite configured properly?

I am building db-4.6.19 from source on Novell SuSE Linux 9.2 on ia64 (Intel Itanium2) hardware, then running the test suite with tclsh 8.4. Here’s my configuration line:
cd build_unix
../dist/configure prefix=/home/mark/WORKAREAS/webplatform/build/dev/20070924 with-test --with-tcl=/usr/lib
I run make and that goes well, then I run the standard test in tclsh via:
echo 'info tclversion; source ../test/test.tcl; run_std; exit' | tclsh; tail ALL.OUT
Most of the tests pass, but the tail of ALL.OUT is at db-4.6.19/build_unix/ALL.OUT (below) produces many error messages for a few tests. They seem to be variations on the same issue, and I’m not sure how to fix it at this point – can someone point me to help? It appears that a command isn't parsing properly.
I'm not sure how to troubleshoot further, it seems to be a syntax error.
Thanks!
eval test119 -hash "119" ; verify_dir ./TESTDIR "" 1
FAIL:14:29:10 (00:00:00) run_method: -hash test119: bad command "handles": must be dbremove, dbrename, env, envremove, open, sequence, version, rand, random_int, srand, or debug_check
eval test120 -hash "120" ; verify_dir ./TESTDIR "" 1
FAIL:14:29:10 (00:00:00) run_method: -hash test120: bad command "handles": must be dbremove, dbrename, env, envremove, open, sequence, version, rand, random_int, srand, or debug_check
eval test121 -hash "121" ; verify_dir ./TESTDIR "" 1
FAIL:14:29:10 (00:00:00) run_method: -hash test121: bad command "handles": must be dbremove, dbrename, env, envremove, open, sequence, version, rand, random_int, srand, or debug_check
eval test122 -hash "122" ; verify_dir ./TESTDIR "" 1
FAIL:14:29:10 (00:00:00) run_method: -hash test122: bad command "handles": must be dbremove, dbrename, env, envremove, open, sequence, version, rand, random_int, srand, or debug_check
Regression Tests Failed
Test suite run completed at: 14:29 09/24/07

Thanks, I have built in a new directory and ammended my configuration line to:
../dist/configure prefix=/home/mark/WORKAREAS/webplatform/build/dev/20070926 with-test enable-tcl with-tcl=/usr/lib
Results in:
checking build system type... ia64-unknown-linux-gnu
checking host system type... ia64-unknown-linux-gnu
checking if building in the top-level or dist directories... no
checking if --disable-cryptography option specified... no
checking if --disable-hash option specified... no
checking if --disable-mutexsupport option specified... no
checking if --disable-queue option specified... no
checking if --disable-replication option specified... no
checking if --disable-statistics option specified... no
checking if --disable-verify option specified... no
checking if --enable-compat185 option specified... no
checking if --enable-cxx option specified... no
checking if --enable-debug option specified... no
checking if --enable-debug_rop option specified... no
checking if --enable-debug_wop option specified... no
checking if --enable-diagnostic option specified... no
checking if --enable-dump185 option specified... no
checking if --enable-java option specified... no
checking if --enable-mingw option specified... no
checking if --enable-fine_grained_lock_manager option specified... no
checking if --enable-o_direct option specified... no
checking if --enable-posixmutexes option specified... no
checking if --enable-pthread_api option specified... no
checking if --enable-rpc option specified... no
checking if --enable-smallbuild option specified... no
checking if --enable-tcl option specified... yes
checking if --enable-test option specified... no
checking if --enable-uimutexes option specified... no
checking if --enable-umrw option specified... no
checking if --with-mutex=MUTEX option specified... no
checking if --with-tcl=DIR option specified... /usr/lib
checking if --with-uniquename=NAME option specified... no
checking for chmod... chmod
checking for cp... cp
checking for ln... ln
checking for mkdir... mkdir
checking for rm... rm
checking for sh... /bin/sh
checking for a BSD-compatible install... /usr/bin/install -c
checking for cc... cc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether cc accepts -g... yes
checking for cc option to accept ISO C89... none needed
checking for an ANSI C-conforming const... yes
checking for inline... inline
checking whether we are using gcc version 2.96... no
checking whether g++ requires -fhandle-exceptions... no
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for ld used by cc... /usr/ia64-suse-linux/bin/ld
checking if the linker (/usr/ia64-suse-linux/bin/ld) is GNU ld... yes
checking for /usr/ia64-suse-linux/bin/ld option to reload object files... -r
checking for BSD-compatible nm... /usr/bin/nm -B
checking whether ln -s works... yes
checking how to recognise dependent libraries... pass_all
checking how to run the C preprocessor... cc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking dlfcn.h usability... yes
checking dlfcn.h presence... yes
checking for dlfcn.h... yes
checking for g77... no
checking for xlf... no
checking for f77... no
checking for frt... no
checking for pgf77... no
checking for cf77... no
checking for fort77... no
checking for fl32... no
checking for af77... no
checking for xlf90... no
checking for f90... no
checking for pgf90... no
checking for pghpf... no
checking for epcf90... no
checking for gfortran... no
checking for g95... no
checking for xlf95... no
checking for f95... no
checking for fort... no
checking for ifort... no
checking for ifc... no
checking for efc... no
checking for pgf95... no
checking for lf95... no
checking for ftn... no
checking whether we are using the GNU Fortran 77 compiler... no
checking whether accepts -g... no
checking the maximum length of command line arguments... 131072
checking command to parse /usr/bin/nm -B output from cc object... ok
checking for objdir... .libs
checking for ar... ar
checking for ranlib... ranlib
checking for strip... strip
checking if cc supports -fno-rtti -fno-exceptions... no
checking for cc option to produce PIC... -fPIC
checking if cc PIC flag -fPIC works... yes
checking if cc static flag -static works... yes
checking if cc supports -c -o file.o... yes
checking whether the cc linker (/usr/ia64-suse-linux/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... cat: /etc/ld.so.conf.d/*.conf: No such file or directory
GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
configure: creating libtool
appending configuration tag "CXX" to libtool
appending configuration tag "F77" to libtool
checking SOSUFFIX from libtool... .so
checking MODSUFFIX from libtool... .so
checking JMODSUFFIX from libtool... .so
checking whether stat file-mode macros are broken... no
checking whether time.h and sys/time.h may both be included... yes
checking for dirent.h that defines DIR... yes
checking for library containing opendir... none required
checking sys/select.h usability... yes
checking sys/select.h presence... yes
checking for sys/select.h... yes
checking sys/socket.h usability... yes
checking sys/socket.h presence... yes
checking for sys/socket.h... yes
checking sys/time.h usability... yes
checking sys/time.h presence... yes
checking for sys/time.h... yes
checking for struct stat.st_blksize... yes
checking for inttypes.h... (cached) yes
checking for stdint.h... yes
checking stddef.h usability... yes
checking stddef.h presence... yes
checking for stddef.h... yes
checking for unistd.h... (cached) yes
checking for char... yes
checking size of char... 1
checking for unsigned char... yes
checking size of unsigned char... 1
checking for short... yes
checking size of short... 2
checking for unsigned short... yes
checking size of unsigned short... 2
checking for int... yes
checking size of int... 4
checking for unsigned int... yes
checking size of unsigned int... 4
checking for long... yes
checking size of long... 8
checking for unsigned long... yes
checking size of unsigned long... 8
checking for long long... yes
checking size of long long... 8
checking for unsigned long long... yes
checking size of unsigned long long... 8
checking for char *... yes
checking size of char *... 8
checking for u_char... yes
checking for u_short... yes
checking for u_int... yes
checking for u_long... yes
checking for u_int8_t... yes
checking for u_int16_t... yes
checking for int16_t... yes
checking for u_int32_t... yes
checking for int32_t... yes
checking for u_int64_t... yes
checking for int64_t... yes
checking for FILE... yes
checking for off_t... yes
checking for pid_t... yes
checking for size_t... yes
checking for time_t... yes
checking for size_t... (cached) yes
checking size of size_t... 8
checking for ssize_t... yes
checking for uintmax_t... yes
checking for uintptr_t... yes
checking for socklen_t... yes
checking for ANSI C exit success/failure values... yes
checking for mutexes... POSIX/pthreads/library
checking for main in -lpthread... yes
checking for library containing sched_yield... none required
checking for library containing fdatasync... none required
checking for library containing getaddrinfo... none required
checking for library containing hstrerror... none required
checking for main in -lm... yes
checking for main in -lnsl... yes
checking for main in -lpthread... (cached) yes
checking for main in -lsocket... no
checking for abort... yes
checking for atoi... yes
checking for atol... yes
checking for getcwd... yes
checking for getenv... yes
checking for getopt... yes
checking for isalpha... yes
checking for isdigit... yes
checking for isprint... yes
checking for isspace... yes
checking for memcmp... yes
checking for memcpy... yes
checking for memmove... yes
checking for printf... yes
checking for qsort... yes
checking for raise... yes
checking for rand... yes
checking for strcasecmp... yes
checking for strcat... yes
checking for strchr... yes
checking for strdup... yes
checking for strerror... yes
checking for strncat... yes
checking for strncmp... yes
checking for strrchr... yes
checking for strsep... yes
checking for strtol... yes
checking for strtoul... yes
checking for _fstati64... no
checking for directio... no
checking for fchmod... yes
checking for fclose... yes
checking for fcntl... yes
checking for fdatasync... yes
checking for fgetc... yes
checking for fgets... yes
checking for fopen... yes
checking for fwrite... yes
checking for getaddrinfo... yes
checking for getrusage... yes
checking for gettimeofday... yes
checking for getuid... yes
checking for hstrerror... yes
checking for localtime... yes
checking for mprotect... yes
checking for pstat_getdynamic... no
checking for pthread_yield... yes
checking for sched_yield... yes
checking for select... yes
checking for sigaction... yes
checking for snprintf... yes
checking for stat... yes
checking for strftime... yes
checking for sysconf... yes
checking for time... yes
checking for vsnprintf... yes
checking for yield... no
checking for ftruncate... yes
checking for clock_gettime... no
checking for ctime_r... yes
checking for 2 or 3 argument version of ctime_r... 2-argument
checking for pread... yes
checking for pwrite... yes
checking for fcntl/F_SETFD... yes
checking for special C compiler options needed for large files... no
checking for FILEOFFSET_BITS value needed for large files... no
checking for mlock... yes
checking for munlock... yes
checking for mmap... yes
checking for munmap... yes
checking for shmget... yes
checking for existence of /usr/lib/tclConfig.sh... loading
checking for 64-bit integral type support for sequences... yes
configure: creating ./config.status
config.status: creating Makefile
config.status: creating db_cxx.h
config.status: creating db_int.h
config.status: creating clib_port.h
config.status: creating include.tcl
config.status: creating db.h
config.status: creating db_config.h
So I believe configuration is fine. Make also completes fine.
~/WORKAREAS/webplatform/build/dev/20070926/db-4.6.19/build_unix> tclsh
% source ../test/test.tcl
% run_std
Test suite run started at: 09:51 09/26/07
Berkeley DB 4.6.19: (August 10, 2007)
Running environment tests
Running archive tests
Running backup tests
Running file operations tests
Running locking tests
Running logging tests
Running memory pool tests
Running transaction tests
Running deadlock detection tests
Running subdatabase tests
Running byte-order tests
Running recno backing file tests
Running DBM interface tests
Running NDBM interface tests
Running Hsearch interface tests
Running secondary index tests
Running replication tests
Running security tests
Running recovery tests
FAIL:09:51:09 (00:00:00) r: recd: bad command "handles": must be dbremove, dbrename, env, envremove, open, sequence, version, rand, random_int, srand, or debug_check
Running join test
Running btree tests
Running rbtree tests
Running queue tests
Running queueext tests
Running recno tests
Running frecno tests
Running rrecno tests
Running hash tests
UNEXPECTED OUTPUT: Berkeley DB 4.6.19: (August 10, 2007)
UNEXPECTED OUTPUT: FAIL:09:51:06 (00:00:00) r: env: bad command "handles": must be dbremove, dbrename, env, envremove, open, sequence, version, rand, random_int, srand, or debug_check
UNEXPECTED OUTPUT: FAIL:09:51:06 (00:00:00) r: archive: bad command "handles": must be dbremove, dbrename, env, envremove, open, sequence, version, rand, random_int, srand, or debug_check
UNEXPECTED OUTPUT: FAIL:09:51:06 (00:00:00) r: backup: bad command "handles": must be dbremove, dbrename, env, envremove, open, sequence, version, rand, random_int, srand, or debug_check
UNEXPECTED OUTPUT: FAIL:09:51:06 (00:00:00) r: fop: bad command "handles": must be dbremove, dbrename, env, envremove, open, sequence, version, rand, random_int, srand, or debug_check
UNEXPECTED OUTPUT: FAIL:09:51:06 (00:00:00) r: lock: bad command "handles": must be dbremove, dbrename, env, envremove, open, sequence, version, rand, random_int, srand, or debug_check
...and so on to the end. This seems to be the same issue I'd originally reported in this thread. Is there anything else I can do to troubleshoot this? I'm not a tcl expert, unfortunately.
Thanks again for your help or pointers!
--Mark

How to pass a table of data to transaction.

Hi,
I need to pass several rows of data to an internal table of a bapi from a page .
I know how to create a table in xMII transaction within itself.
But I couldn't figure how to pass several rows from a HTML page to an input parameter of a Xacute query.
Here is the scenario.
My HTML page is having a table of 3 rows and 12 columns.
I need to pass this data to an input parameter of a Xacute query.
Can some one help me in this regard.
Thanks,
Srinivas.

Rick,
Thank you very much Rick. Your work around is working fine.
I am trying to enhace it a little bit this concept as below.
I created a transaction which takes string input through transaction parameters and impliments your logic of saving to a local text file and loads as XML data through XML loader and finally assigning to OUTPUT parameter of xml type.
Through this I can call this transaction where ever I need to convert string to XML.
But the problen I am facing here is whenI test this transaction through Xacute Query with some well formed XML data as input I am getting nothing in the test page.
Here are the steps I followed in the transaction:
1. Save the input text to a local file.
2. Load the same file using XML Loader.
3. Assign the xmlLoader.xmlContent -> Transaction.OUTPUT ( Assign XML) through assignment block.
4. Delete the temporary file.
Can you help in this regard.
Thanks,
Srinivas.
Thanks,

[Solved] if(Transaction specified for a non-transactional database) then

I am getting started with BDBXML 2.4.14 transactions and XQuery update functionality and I am having some difficulty with 'node insert ...' and transactions failing with 'Transaction specified for a non-transactional database'
Thanks for helping out.
Setup:
I have coded up a singleton manager for the XmlManger with a ThreadLocal holding the transaction and a query method to execute XQueries. The setup goes like this:
environmentConfig = new EnvironmentConfig();
environmentConfig.setRunRecovery(true); environmentConfig.setTransactional(true); environmentConfig.setAllowCreate(true); environmentConfig.setRunRecovery(true); environmentConfig.setInitializeCache(true); environmentConfig.setTxnMaxActive(0); environmentConfig.setInitializeLocking(true); environmentConfig.setInitializeLogging(true); environmentConfig.setErrorStream(System.err);
environmentConfig.setLockDetectMode(LockDetectMode.MINWRITE); environmentConfig.setJoinEnvironment(true); environmentConfig.setThreaded(true);
xmlManagerConfig = new XmlManagerConfig(); xmlManagerConfig.setAdoptEnvironment(true); xmlManagerConfig.setAllowAutoOpen(true); xmlManagerConfig.setAllowExternalAccess(true);
xmlContainerConfig = new XmlContainerConfig(); xmlContainerConfig.setAllowValidation(false); xmlContainerConfig.setIndexNodes(true); xmlContainerConfig.setNodeContainer(true);
// initialize
instance.xmlManager = new XmlManager(instance.getEnvironment(), instance.getXmlManagerConfig());
instance.xmlContainer = instance.xmlManager.openContainer( containerName, instance.getXmlContainerConfig());
private ThreadLocal<XmlTransaction> transaction = new ThreadLocal<XmlTransaction>();
public XmlTransaction getTransaction() throws Exception {
 if (transaction.get() == null) {
 XmlTransaction t = xmlManager.createTransaction();
 log.info("Transaction created, id: " + t.getTransaction().getId());
 transaction.set(t);
 } else if (log.isDebugEnabled()) {
 log.debug("Reusing transaction, id: "
 + transaction.get().getTransaction().getId());
 return transaction.get();
 private XmlQueryContext createQueryContext(String docName) throws Exception {
 XmlQueryContext context = xmlManager.createQueryContext(
 XmlQueryContext.LiveValues, XmlQueryContext.Lazy);
 List<NamespacePrefix> namespacePrefixs = documentPrefixes.get(docName);
 // declare ddi namespaces
 for (NamespacePrefix namespacePrefix : namespacePrefixs) {
 context.setNamespace(namespacePrefix.getPrefix(), namespacePrefix
 .getNamespace());
 return context;
 public XmlResults xQuery(String query) throws Exception {
 XmlQueryExpression xmlQueryExpression = null;
 XmlQueryContext xmlQueryContext = getQueryContext(docName);
 try {
 xmlQueryExpression = xmlManager.prepare(getTransaction(), query,
 xmlQueryContext);
 log.info(query.toString());
 } catch (Exception e) {
 if (xmlQueryContext != null) {
 xmlQueryContext.delete();
 throw new DDIFtpException("Error prepare query: " + query, e);
 XmlResults rs = null;
 try {
 rs = xmlQueryExpression.execute(getTransaction(), xmlQueryContext);
 // catch deadlock and implement retry
 catch (Exception e) {
 throw new DDIFtpException("Error on query execute of: " + query, e);
 } finally {
 if (xmlQueryContext != null) {
 xmlQueryContext.delete();
 xmlQueryExpression.delete();
 return rs;
<?xml version="1.0" encoding="UTF-8"?>
<Test version="0.1">
<Project id="test-project" agency="dda">
<File id="large-doc.xml" type="ddi"/>
<File id="complex-doc.xml" type="ddi"/>
</Project>
<Project id="2nd-project" agency="test.org"/>
</Test>
Problem:
All the queries are run through the xQuery method and I do delete the XmlResults afterwards. How do I get around the 'Transaction specified for a non-transactional database' what is the transactions doing? How do I get state information out of a transaction? What am I doing wrong here?
1 First I insert a node:
Transaction created, id: -2147483647
Adding document: large-doc.xml to xml container
Reusing transaction, id: -2147483647
Working doc: ddieditor.xml
Root element: Test
Reusing transaction, id: -2147483647
insert nodes <Project id="JUnitTest" agency="test.org"></Project> into doc("dbxml:/ddieditor.dbxml/ddieditor.xml")/Test
Reusing transaction, id: -2147483647
2 Then do a query:
Reusing transaction, id: -2147483647
doc("dbxml:/ddieditor.dbxml/ddieditor.xml")/Test/Project/@id
Reusing transaction, id: -2147483647
3 The same query again:
Reusing transaction, id: -2147483647
doc("dbxml:/ddieditor.dbxml/ddieditor.xml")/Test/Project/@id
Reusing transaction, id: -2147483647
4 Delete a node:
Reusing transaction, id: -2147483647
delete node for $x in doc("dbxml:/ddieditor.dbxml/ddieditor.xml")/Test/Project where $x/@id = '2nd-project' return $x
Reusing transaction, id: -2147483647
5 Then an error on query:
Reusing transaction, id: -2147483647
doc("dbxml:/ddieditor.dbxml/ddieditor.xml")/Test/Project/@id
Reusing transaction, id: -2147483647
Transaction specified for a non-transactional database
com.sleepycat.dbxml.XmlException: Error: Invalid argument, errcode = DATABASE_ERROR
 at com.sleepycat.dbxml.dbxml_javaJNI.XmlResults_hasNext(Native Method)
 at com.sleepycat.dbxml.XmlResults.hasNext(XmlResults.java:136)
Message was edited by:
jannikj

Ok got it solved by increasing the locks lockers and mutex's I allso increased the the log buffer size:
environmentConfig = new EnvironmentConfig();
 // general environment
 environmentConfig.setAllowCreate(true);
 environmentConfig.setRunRecovery(true); // light recovery on startup
 //environmentConfig.setRunFatalRecovery(true); // heavy recovery on startup
 environmentConfig.setJoinEnvironment(true); // reuse of environment: ok
 environmentConfig.setThreaded(true);
 // log subsystem
 environmentConfig.setInitializeLogging(true);
 environmentConfig.setLogAutoRemove(true);
 environmentConfig.setLogBufferSize(128 * 1024); // default 32KB
 environmentConfig.setInitializeCache(true); // shared memory region
 environmentConfig.setCacheSize(2500 * 1024 * 1024); // 250MB cache
 // transaction
 environmentConfig.setTransactional(true);
 environmentConfig.setTxnMaxActive(0); // live forever, no timeout
 // locking subsystem
 environmentConfig.setInitializeLocking(true);
environmentConfig.setMutexIncrement(22);
environmentConfig.setMaxMutexes(200000);
environmentConfig.setMaxLockers(200000);
environmentConfig.setMaxLockObjects(200000); // default 1000
environmentConfig.setMaxLocks(200000);
// deadlock detection
 environmentConfig.setLockDetectMode(LockDetectMode.MINWRITE);
In the docs by Oracle it is limited information given regarding the impact of these settings and their options. Can you guys point in a direction where I can find some written answers or it hands on?

Testing of transaction BD64?

Similar Messages

Maybe you are looking for