Testing Server error

Hello~
I am working on a site in Dreamweaver 8, and keep getting an
error message about the testing server not resolving... but I don't
have a testing server set up! The Testing Server tab is set to
None. The host directory is set to "/", like it reads in the error,
but I'm not sure why it thinks this is also a testing server. Any
ideas?
Error:
The URL prefix / for this site's testing server could not be
resolved. This could be due to several reasons:
1. You have specified a local root folder that does not fall
under the web server root folder (not the easiest way to test a
site).
2. There is no web server running on the URL. A web server
must be running in order to map pages through a URL.
3. There is a web server running but no virtual web folder
has been mapped to this prefix. A web virtual folder mapping is
needed for local sites that aren't under ther web root
folder.

dave_65 wrote:
> 2) The testing server specified does not map to
>
http://localhost/somefolder/website/_mmServerScripts/MMHTTPDB.php
URL. Verify
> that the URL Prefix maps to the root of the site."
The problem lies in the following:
> Testing server folder: C:\Documents and
> Settings\somefolder\....\somefolder\Website\
The testing server folder must be inside the Apache server
root. If you
have a standard Apache setup, this will be a folder called
htdocs within
C:\Program Files\Apache etc.
David Powers, Adobe Community Expert
Author, "The Essential Guide to Dreamweaver CS3" (friends of
ED)
Author, "PHP Solutions" (friends of ED)
http://foundationphp.com/

Similar Messages

PHP setup - Testing server errors

Hi all,
I am into my first play with Dynamic web pages. I am trying
to get a database and dreamweaver to connect together. I have tried
a variety of settings to get it to work but everytime I seem to
come across a problem with the folder where the database are
located and trying to map to the URL prefix mapping.
My databse is located in C:/phpdev5/mysql/data/artist
I cannot fathom where to point the URL prefix too. (For
further info the local root folder is elsewhere and the remote
folder is my live website- I did try to get it to connect to that
but gave up and tried doing it locally for the moment).
Can anyone stop me from tearing my hair out.
Mark

> My databse is located in C:/phpdev5/mysql/data/artist
a MySQL database isn't in one place, it's a collection of
information stored
in the MySQL application. You interact with it using a
database_name/username/password.
The url prefix for the testing server is what's needed to
view the site
using the local server. Such as:
http://localhost/thissite/
Alan
Adobe Community Expert, dreamweaver
http://www.adobe.com/communities/experts/

File Not Found error on local test server

Hello all,
I have no idea what happened, but my local test server went
from working fine to not working at all. When I go to test a page
locally, I get this error:
The requested URL /[filename].php was not found on this
server
I did not change any of the configuration files, I can load
and use phpMyadmin, but absolutely can not test a page locally, not
even something as basic as David Powers' phptest.php page which is
a whopping 2 lines of code to verify the php version on my
computer.
PLEASE, I beg of you, if you have any suggestions, PLEASE
throw them my way. I am completely stonewalled from further
development because of this issue. PLEASE HELP!
Sincerely,
wordman

Is that a root relative link? If you aren't using virtual
hosts those won't
work.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Wordman-GL" <[email protected]> wrote in
message
news:gpmkjg$rna$[email protected]..
> Hello all,
>
> I have no idea what happened, but my local test server
went from working
> fine
> to not working at all. When I go to test a page locally,
I get this error:
>
> The requested URL /[filename].php was not found on this
server
>
> I did not change any of the configuration files, I can
load and use
> phpMyadmin, but absolutely can not test a page locally,
not even something
> as
> basic as David Powers' phptest.php page which is a
whopping 2 lines of
> code to
> verify the php version on my computer.
>
> PLEASE, I beg of you, if you have any suggestions,
PLEASE throw them my
> way. I
> am completely stonewalled from further development
because of this issue.
> PLEASE HELP!
>
> Sincerely,
>
> wordman
>

Error while running OAF Test Page Http 500 Internal Server Error

I have installed R12 on my laptop having windows 2003 Server, which running successfully.
In Same machine i have installed Jdeveloper for OAF customization by following 416708.1.
While running test OAF page from Jdev, following error accruing. I have Run autoconfig as well.
There is a problem with the page you are trying to reach and it cannot be displayed.
Please try the following:
Open the r12.oracle.com:8988 home page, and then look for links to the information you want.
Click the Refresh button, or try again later.
Click Search to look for information on the Internet.
You can also see a list of related sites.
HTTP 500 - Internal server error
Internet Explorer

HTTP 500 - Internal server error
Internet ExplorerThis is a generic error, please check Apache log files for details about the error (error_log* and access_log*).
Thanks,
Hussein

Getting Error 404 when trying to open php documents in DW CS3 Test server

I am new to DW, php, MySQL and Apache. I have set up a test
environment but obviously have done something wrong. I currently
create my web pages from scratch in notepad and update my site with
a GUI FTP program, but I know with these new tools, I will
eventually be able to create the type of web site that I really
want and need. Every time I try to open any php document in DW CS3
using the"Preview/Debug in browser" button I get an error 404. The
browsers I use are ie7.0.5730.11 and Nav 9.0b2 . I know this may
not even be a DW issue, but I really am at an impasse. Any help
would be much appreciated.

Jharek Wolf wrote:
> As I previously mentioned I am new to Apache also. Are
you willing to
> continue helping me?
It sounds as though you need to be taken through this process
step by
step. Even though you say you defined a testing server, the
fact that
you didn't have your documents in the server's document root
suggests
your site definition might also be wrong.
First things first. Since you're new to Apache, what happens
when you
type
http://localhost/ into your browser
address bar? Depending on the
version of Apache, you should get an Apache test page or
simply a page
that says "It works!". If you get neither, it means Apache is
either not
running or that it has been incorrectly installed.
Assuming Apache is working, have you installed PHP? If so,
put the
following code into a blank file (there must be no HTML or
DOCTYPE -
just the following line):
<?php phpinfo(); ?>
Save the file as test.php in the Apache document root. Then
type
http://localhost/test.php into
your browser address bar. If you see a
page with masses of detail about your PHP configuration, PHP
is working.
You can then move to the final stage. Create a new folder
inside the
Apache document root. This is where you should store your
site. If you
call it "mysite", these are the settings you need in the
Testing server
definition:
Testing server folder: /path/to/htdocs/mysite/
URL prefix:
http://localhost/mysite/
Don't take "/path/to/htdocs/mysite/" literally. It indicates
the
location of htdocs/mysite on your local hard drive. Use the
folder icon
to the right of the Testing server folder field to navigate
to it.
If you're new to PHP, you might find that my book, "The
Essential Guide
to Dreamweaver CS3 with CSS, Ajax, and PHP" answers a lot of
your
questions. It covers all the Dreamweaver PHP server behaviors
in detail,
as well as teaching the basics of PHP and database
maintenance. You can
find more details by following the link in my sig.
David Powers, Adobe Community Expert
Author, "The Essential Guide to Dreamweaver CS3" (friends of
ED)
Author, "PHP Solutions" (friends of ED)
http://foundationphp.com/

Server Error, test on WSNavigator

Hi Guys! I have the scenary SOAP to RFC. The service interface is synchronous.
I am testing the WS since WS Navigator,
1)Testing without input data ---> response "Server Error"
    Since se37, I execute the RFC and the response is correct.
Since Runtime Workbench, I see the message request XML ok, and the message response not created.
Audit Log:
2011-07-21 11:34:36 Information RfcAdapter received a synchronous message. Trying to send sRFC for J2EE_GUEST.
2011-07-21 11:34:36 Error The message was successfully transmitted to endpoint com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error encountered while executing mapping: com.sap.aii.af.service.mapping.MappingException: Mapping failed using connection SOAP_http://sap.com/xi/XI/System.
2011-07-21 11:34:36 Error The message status was set to FAIL.
2)Testing with input data ---> response "OK XML"
I need a tips in where modify the mapping in the case 1)?

Hi. I resolved the question, the data type response was changed becouse the cardinality wrong. Then, I updated the message mapping response and all ok.
DT_RESPONSE_old
ADDRESS
          ADDR1
                 ADDR2   1..Unbounded   <<<<------ Error
                          COUNTRY
DT_RESPONSE_new
ADDRESS
          ADDR1   0..Unbounded
                     COUNTRY
Thanks all for your replies!!!
Edited by: ecruz2010 on Jul 22, 2011 2:59 PM
Edited by: ecruz2010 on Jul 22, 2011 3:13 PM

INTEGRATION_DIRECTORY_HMI test - 500 Internal server error

When I test my RFC connection INTEGRATION_DIRECTORY_HMI, it is giving the following error.
500 - Internal Server Error
Application error occurred during request processing.
Details: Error [javax.servlet.ServletException: REQID not found].
Exception id: [000D600B942601060000010E000CA07A00041309B861DE0F]
The following are the the technical seetings for INTEGRATION_DIRECTORY_HMI RFC destination.
TargetHost: XXXXX.XXX
Path Prefix: /dir/CacheRefresh
Service No: 50100
When I went to SXI_CACHE, it seems to be fine.
Please help.
Thanks,
Samatha

HI,
Try the Pipelie URL It should be
http://<hostname>:<port>/sap/xi/engine?type=entry
not type=execute
Check this threads-
Received HTTP response code 500..
R/3 - (RFC) -> XI - (File) -> Legacy System
Hope this helps,
Regards,
Moorthy

Deployment Error when transporting to TEST server

Hi experts,
I'm having a deployment error when transporting my dc from development server to test server using the Change Management Service - Transport Studio.
In the error message, there is the mention of the following sentence:
=============================================
Check causing exception for details (trace file). Hint: Are all referenced components deployed and available on the engine ?
=============================================
But the dc is using only the standard default dcs like:
com.sap.aii.proxy.framework (default)
com.sap.aii.util.misc (default)
com.sap.exception (default)
com.sap.mw.jco (default)
tc/cmi (default)
tc/ddic/ddicruntime (default)
td/ddic/metamodel/content (default)
tc/logging (default)
tc/wd/webdynpro (default)
tc/wdp/metamodel/content (default)
So could these dcs not have been deployed on the test server ?
How do we confirm this ?
Thanks in advance.
Rgds,
Daniel

A dump of the exception i m getting.
Anyone has a clue or advice of how to overcome this problem ?
20081107165952 Info   :Nov 7, 2008 4:46:03 PM   Info: Starting: Update: Selected development component 'appl/main'/'com.diagonal'/'dev_devcias_C'/'823'/'0' updates currently deployed development component 'appl/main'/'com.diagonal'/'LOKAL'/'0.2006.01.12.14.18.23'/'0'.
20081107165952 Info   :Nov 7, 2008 4:46:03 PM   Info: SDA to be deployed: /usr/sap/WS5/JC00/SDM/root/origin/com.diagonal/appl/main/dev_devcias_C/0/823/appl~main.sda
20081107165952 Info   :Nov 7, 2008 4:46:03 PM   Info: Software type of SDA: J2EE
20081107165952 Info   :Nov 7, 2008 4:46:03 PM   Info: ***** Begin of SAP J2EE Engine Deployment (J2EE Application) *****
20081107165952 Info   :Nov 7, 2008 4:46:07 PM   Info: Begin of log messages of the target system:
20081107165952 Info   :08/11/07 16:46:03 - ***********************************************************
20081107165952 Info   :08/11/07 16:46:04 - Start updating EAR file...
20081107165952 Info   :08/11/07 16:46:04 - start-up mode is lazy
20081107165952 Info   :08/11/07 16:46:04 - EAR file updated successfully for 70ms.
20081107165952 Info   :08/11/07 16:46:04 - Start updating...
20081107165952 Info   :08/11/07 16:46:06 - EAR file uploaded to server for 861ms.
20081107165952 Info   :08/11/07 16:46:07 - ERROR: Not updated. Deploy Service returned ERROR:
20081107165952 Info   :                     java.rmi.RemoteException: Cannot deploy application com.diagonal/appl~main..
20081107165952 Info   :                     Reason: Clusterwide exception: Failed to deploy application com.diagonal/appl~main. Check causing exception for details (trace file). Hint: Are all referenced components deployed and available on the engine?; nested exception is:
20081107165952 Info   :                          com.sap.engine.services.deploy.container.DeploymentException: Clusterwide exception: Failed to deploy application com.diagonal/appl~main. Check causing exception for details (trace file). Hint: Are all referenced components deployed and available on the engine?
20081107165952 Info   :                          at com.sap.engine.services.deploy.server.DeployServiceImpl.update(DeployServiceImpl.java:681)
20081107165952 Info   :                          at com.sap.engine.services.deploy.server.DeployServiceImplp4_Skel.dispatch(DeployServiceImplp4_Skel.java:1278)
20081107165952 Info   :                          at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:313)
20081107165952 Info   :                          at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:199)
20081107165952 Info   :                          at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:136)
20081107165952 Info   :                          at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
20081107165952 Info   :                          at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
20081107165952 Info   :                          at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
20081107165952 Info   :                          at java.security.AccessController.doPrivileged(AccessController.java:215)
20081107165952 Info   :                          at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
20081107165952 Info   :                          at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
20081107165952 Info   :                     Caused by: com.sap.engine.services.deploy.container.DeploymentException: Clusterwide exception: Failed to deploy application com.diagonal/appl~main. Check causing exception for details (trace file). Hint: Are all referenced components deployed and available on the engine?
20081107165952 Info   :                          at com.sap.engine.services.webdynpro.WebDynproContainer.deploy(WebDynproContainer.java:1050)
20081107165952 Info   :                          at com.sap.engine.services.webdynpro.WebDynproContainer.makeUpdate(WebDynproContainer.java:1281)
20081107165952 Info   :                          at com.sap.engine.services.deploy.server.application.UpdateTransaction.makeComponents(UpdateTransaction.java:400)
20081107165952 Info   :                          at com.sap.engine.services.deploy.server.application.DeployUtilTransaction.commonBegin(DeployUtilTransaction.java:321)
20081107165952 Info   :                          at com.sap.engine.services.deploy.server.application.UpdateTransaction.begin(UpdateTransaction.java:164)
20081107165952 Info   :                          at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:292)
20081107165952 Info   :                          at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:326)
20081107165952 Info   :                          at com.sap.engine.services.deploy.server.DeployServiceImpl.makeGlobalTransaction(DeployServiceImpl.java:3184)
20081107165952 Info   :                          at com.sap.engine.services.deploy.server.DeployServiceImpl.update(DeployServiceImpl.java:669)
20081107165952 Info   :                          ... 10 more
20081107165952 Info   :                     For detailed information see the log file of the Deploy Service.
20081107165952 Info   :08/11/07 16:46:07 - ***********************************************************
20081107165952 Info   :Nov 7, 2008 4:46:07 PM   Info: End of log messages of the target system.
20081107165952 Info   :Nov 7, 2008 4:46:07 PM   Info: ***** End of SAP J2EE Engine Deployment (J2EE Application) *****
20081107165952 Info   :Nov 7, 2008 4:46:07 PM   Error: Aborted: development component 'appl/main'/'com.diagonal'/'dev_devcias_C'/'823'/'0', grouped by :
20081107165952 Info   :Caught exception during application deployment from SAP J2EE Engine's deploy service:
20081107165952 Info   :java.rmi.RemoteException: Cannot deploy application com.diagonal/appl~main..
20081107165952 Info   :Reason: Clusterwide exception: Failed to deploy application com.diagonal/appl~main. Check causing exception for details (trace file). Hint: Are all referenced components deployed and available on the engine?; nested exception is:
20081107165952 Info   :     com.sap.engine.services.deploy.container.DeploymentException: Clusterwide exception: Failed to deploy application com.diagonal/appl~main. Check causing exception for details (trace file). Hint: Are all referenced components deployed and available on the engine?
20081107165952 Info   : (message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).REMEXC)
20081107165952 Info   :Nov 7, 2008 4:46:07 PM   Info: Starting to save the repository
20081107165952 Info   :Nov 7, 2008 4:46:07 PM   Info: Finished saving the repository
20081107165952 Info   :Nov 7, 2008 4:46:07 PM   Info: Starting: Update: Selected software component 'CIAS_WD_APPLICATIONS'/'diagonal.com'/'dev_devcias_C'/'1000.1.0.6.0.20081107075633''/'0' updates currently deployed software component 'CIAS_WD_APPLICATIONS'/'diagonal.com'/'dev_devcias_C'/'1000.1.0.0.0.20061122075934''/'1'.
20081107165952 Info   :Nov 7, 2008 4:46:07 PM   Error: Aborted: software component 'CIAS_WD_APPLICATIONS'/'diagonal.com'/'dev_devcias_C'/'1000.1.0.6.0.20081107075633''/'0':
20081107165952 Info   :Failed deployment of SDAs:
20081107165952 Info   :development component 'appl/main'/'com.diagonal'/'dev_devcias_C'/'823'/'0' : aborted
20081107165952 Info   :Please, look at error logs above for more information!
20081107165952 Info   :Nov 7, 2008 4:46:07 PM   Info: Starting to save the repository
20081107165952 Info   :Nov 7, 2008 4:46:08 PM   Info: Finished saving the repository
20081107165952 Info   :Nov 7, 2008 4:46:08 PM   Info: J2EE Engine is in same state (online/offline) as it has been before this deployment process.
20081107165952 Info   :Nov 7, 2008 4:46:08 PM   Error: -
At least one of the Deployments failed -
20081107165952 Info   :end of log
20081107165952 Info   :RC of deployment: 12
20081107165952 Info   :Step SDM-deploy ended with result 'fatal error' ,stopping execution at 2008-11-07 16:59:52.0155 +9:00

Server error when testing form!!

Hi,
We have a completed form but cannot test it do to server errors we encounter ever time we try to test. Also have tried to email link to access form which will open and can be filled out, but Server error encountered when we hit submit. How can this be resolved, and what assurances are their that it won't happen to all the respondents trying to submit registration forms for our event when we distribute - this has been an issue for more than a week now?
Thank you,
Julie Boucher

Thanks Julie.
I was able to submit a test record just now, using Win7/Chrome. So you may want to delete a response with a bunch of "test" entries.
I've looked into the server log and don't see any other submissions entries so I suspect that something happens on the client side.
To help us investigate more, can you please tell:
- OS and browser version you are using
- send a screenshot of the error you are seeing
- confirm that you are seeing the problem all the time
- try with a different browser to see if you can reproduce the problem
Also, use the following url:
https://adobeformscentral.com/?f=hQQ5Uqaw-br0rDG0KYpLZA&enableReportProblem
to open the form (but do not submit) and click on "Report Problem" link at the bottom of the page. This will create a email with submission history, please email this to: [email protected] so we can debug further.
Thanks
Roman

Trying to configure test server settings in DW8 and get error

I am trying to setup the test server settings so i can create
some
recordsets.. and everytime i complete the test server
settings page i get a
small box come up that says:
Macromedia Dreamweaver
! No Error Occurred.
OK
thats it.. i hit ok and the settings are there, but i still
cannot create
recordset...
ASP, SQL2005, DW8 VBScript

I get below error when i try to create a domain from import a file option.
PeopleSoft Import Application Server Configuration
1) Import from file
2) Import from application domain
q) Quit
Command to execute (1-2, q) : 1
Enter full path to configuration file
:E:\psoft\PT848_bkp\appserv\CRPROD1\psappsrv.cfg
Enter domain name to create
:CRPROD1
Application Server domain CRPROD1 already exists...
1) Replace existing domain
2) Enter different domain name
q) Quit
Command to execute (1-2, q) : 2
Enter different name for domain: CRPROD
Merging old domain configuration file with new template file...
source E:\psoft\PT848_bkp\appserv\CRPROD1\psappsrv.cfg
template E:\psoft\PT848\appserv\large.cfx
destination E:\psoft\PT848\appserv\CRPROD\psappsrv.cfg
Creating domain folder CRPROD...
Copy psappsrv.ubx to CRPROD\psappsrv.ubx failed!
psappsrv.ubx
and when i try to crearte a domain with " create a domain " option , i got below error message.
PeopleSoft Application Server Administration
1) Administer a domain
2) Create a domain
3) Delete a domain
4) Import domain configuration
q) Quit
Command to execute (1-4, q) : 2
Please enter name of domain to create :CRPROD1
Configuration templates:
1) developer
2) large
3) medium
4) small
Select config template number: 2
Creating domain...
Copying application server configuration files...
Stripping Annotations...
Copy psappsrv.ubx to CRPROD1\psappsrv.ubx failed!
Copy psasnt.val to CRPROD1\psappsrv.val failed!
Copy psappsrv.psx to CRPROD1\psappsrv.psx failed!
Copying Jolt repository file...
Copy jrepository to CRPROD1\ failed!
Domain created.
Would you like to configure this domain now? (y/n) [y] :Y
Error opening file 'psappsrv.ubx':
Error opening file 'psappsrv.ubx':
Quick-configure menu -- domain: CRPROD1
Features Settings
========== ==========
Actions
=========
1) Load config as shown
2) Custom configuration
h) Help for this menu
q) Return to previous menu
HINT: Enter 3 to edit DBNAME, then 1 to load

"Test-CsPstnOutboundCall " giving 500 internal server error

Hi ,
we are facing issue with audio calls, i tried to test the outbound calls by running
Test-CsPstnOutboundCall command but it is also giving the same error like in the monitoring report.
Error messageP: 500, Internal server error
Diagnosis: Error Code=10500 sourece=servername, Reason=Gateway responded with 500 server internal error.
Some guide me how to trouble shoot these kind of issues?
Regards
Vijendhar

Please check the listening port for gateway defined in Lync topology is listening on gateway.
Check the dial plan, voice policy, route related with the PSTN phone number are configured correctly.
You can telnet the gateway from mediation server.
For further troubleshooting, use Lync Logging Tool to collect log file on Mediation Server.
Lisa Zheng
TechNet Community Support

Error Using the WSRP Test Server from the Administration Portal

I study the â€œWorking with the BEA WSRP Test Serverâ€ article on dev2dev site(http://dev2dev.bea.com/pub/a/2004/09/wsrp_test_server_at.html), but when I try to add http://wsrp.bea.com/portal/producer?wsdl to Procedures on my localhost Administration Portal(BEA 81 SP3), it give me â€œError: Unable to get the Service Description for the provided WSDL URLâ€. Any idea?

I guess till version 10gr3.1 you only needed to start one server and it allowed to access both admin and service bus console.Yes, in 11g as well you may access the admin and OSB console by just starting the admin server but in 11g OSB configuration gets deployed on OSB server (managed server) and test service also runs over this server.
Are you saying there is some other server I need to start just for running the test console ????Yes. Managed server osb_server1 needs to be started for deploying, testing and accessing OSB resources.
As If the OSB server was not running how can I check my published services, modify them and do all the bits and pieces after opening the open the service bus console but not just test them???You can modify and save your configuration without staring OSB server but if you will check in change centre then all the changes being done without starting OSB server will remain in partially activated state.
I have been using the service bus for 3 years and I have never faced any such issue.With each new release you may get new features and with a major release like 11g, architecture and functionality may change.
If it all there is some other server I need to start then whats the process to do so ??Open command prompt. Navigate to $Domain_Home/bin and run command
startManagedWeblogic.cmd <nameOfManagedServer>
for eg. -
D:\OFMW11g\mw\user_projects\domains\ofmw_domain\bin>startManagedWebLogic.cmd osb_server1
Once this server is up and running, try using test console.
Regards,
Anuj

Error during the hotbackup restore to test server with different db name

Hi,
I am using hotbackup to restore the database with new name on other server
i moved hot backup set to test server i recreated the controlfile
SQL> @/mounts/dcsnpts1_temp/oradata/dcsnpts1/create/create.sql;
Control file created.
SQL> recover database using backup controlfile until cancel;
ORA-00279: change 10354451046463 generated at 06/08/2010 02:51:17 needed for
thread 1
ORA-00289: suggestion :
/mounts/dcsnpts1_arch/dcsnpts1/dcsnpts1_arch_R677255203_T1_S1030.arc
ORA-00280: change 10354451046463 for thread 1 is in sequence #1030
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
CANCEL
ORA-01547: warning: RECOVER succeeded but OPEN RESETLOGS would get error below
ORA-01195: online backup of file 1 needs more recovery to be consistent
ORA-01110: data file 1:
'/mounts/dcsnpts1_data/oradata/dcsnpts1/dbfiles/system01.dbf'
ORA-01112: media recovery not started
SQL> alter database open resetlogs;
alter database open resetlogs
ERROR at line 1:
ORA-01195: online backup of file 1 needs more recovery to be consistent
ORA-01110: data file 1:
'/mounts/dcsnpts1_data/oradata/dcsnpts1/dbfiles/system01.dbf'
i do not have archive logs how i can open the database with resetlog
apprecited inputs.
Thanks
Prakash

all 3 instances reside on single server we use netapp snapshot backup what it will do is it will take all db's snapshot in same time (hotbackup).The snapshots are NOT instantaneous!
If they were actually frozen in time, the DB would be consistent & open.
The snapshot must be handled as any other online (hot) backup.
ALTER SYSTEM SWITCH LOGFILE;
alter database begin backup
-- take hot backup
alter database end backup
ALTER SYSTEM SWITCH LOGFILE;
Restore backed up files, then apply all redos inclusive to steps above

Errors when trying to set up testing server in CS3

Hi,
Ive tried to find the answer to this by googling, but cant
sort it out.
Ive been setting up php/apache/mysql in windows vista -
dwcs3.
Please bear in mind that I am very wet behind the ears with
all this , at
the moment.
Ive been working out of Davids Essentials - CS3 ver. book.
All was going
well. I tested php with the test.php page that was in the
book download.
Tested Apache - got the "It worked" page.
Ive got the Apache symbol in the bottom tray, with the little
green arrow in
the feather.
So far so - so good.
Then I set up the testing server stuff for dreamweaver. Used
the server
root .
Did everything - so I thought - by the instructions.
Tested a php page, by clicking on "live data view" in DW -
then got the
"Forbidden. You dont have permission to access
/php_testing/datatest_40uvgbduqp.php on this server"
Im lost at this point. I searched google, but cant really get
an answer to
it there, there was some stuff about changing permissions,
but Im not really
sure how to do this with a local site. and php/apache seemed
to be working
before setting up the testing server in DW.
Also, when I go to my browser and browse to
localhost/test.php or whatever,
it tells me it cant display the page, cos Im not logged in.
Any help, would be wonderful.
REgards
Fiona

After one headache, more googling, and hours of scanning the
apache
configuration file, I think I found it.
I had changed the root folder from the standard
C:/programfiles/apache..../etc to D:/htdocs but the
configuration file in
Apache was still showing the original root folder path.
Just for interest sake, if I did have to change the
permissions on files
that were just on my local computer, how do you do that, or
should I ever
need to do that?
Regards
Fiona
"fiona" <[email protected]> wrote in message
news:gha5b8$a40$[email protected]..
> Hi,
>
> Ive tried to find the answer to this by googling, but
cant sort it out.
>
> Ive been setting up php/apache/mysql in windows vista -
dwcs3.
>
> Please bear in mind that I am very wet behind the ears
with all this , at
> the moment.
>
> Ive been working out of Davids Essentials - CS3 ver.
book. All was going
> well. I tested php with the test.php page that was in
the book download.
> Tested Apache - got the "It worked" page.
>
> Ive got the Apache symbol in the bottom tray, with the
little green arrow
> in the feather.
>
> So far so - so good.
>
> Then I set up the testing server stuff for dreamweaver.
Used the server
> root .
> Did everything - so I thought - by the instructions.
>
> Tested a php page, by clicking on "live data view" in DW
- then got the
> "Forbidden. You dont have permission to access
> /php_testing/datatest_40uvgbduqp.php on this server"
>
> Im lost at this point. I searched google, but cant
really get an answer
> to it there, there was some stuff about changing
permissions, but Im not
> really sure how to do this with a local site. and
php/apache seemed to be
> working before setting up the testing server in DW.
>
> Also, when I go to my browser and browse to
localhost/test.php or
> whatever, it tells me it cant display the page, cos Im
not logged in.
>
> Any help, would be wonderful.
> REgards
> Fiona
>
>

Previewing on local testing server

When previewing a file in the Dreamweaver development
environment, Dreamweaver loads the file, say testfile.html, in the
browser with its file system address, eg
file://Applications/MAMP/htdocs/jsMath/test/testfile.html. However,
the local website address of this file is
http://localhost:8888/jsMath/test/testfile.html.
This leads to a security error
Security Error: Content at
file:///Applications/MAMP/htdocs/jsMath/test/testfile.html may not
load data from
http://localhost:8888/jsMath/plugins/autoload.js.
The problem can be circumvented by avoiding the Dreamweaver
preview and hand-loading the file directly as
http://localhost:8888/jsMath/test/testfile.html
Surely the preview feature must not be bound by this
restriction. What might be done to get preview to work properly
with this local testing server?
-dao

daoliver wrote:
> Surely the preview feature must not be bound by this
restriction. What might
> be done to get preview to work properly with this local
testing server?
You need to define the testing server correctly in your site
definition.
In your case, the Testing server folder field should be set
to
Applications/MAMP/htdocs/jsMath/test/ and the URL prefix to
http://localhost:8888/jsMath/test/.
David Powers
Adobe Community Expert, Dreamweaver
http://foundationphp.com

Testing Server error

Similar Messages

Maybe you are looking for