Testing the Interface

Hi Team
i have to test an interface. In my scenario there is no IR Part involved, no mapping , only ID part is involved. i am using two adapters, sender is JMS and receiver is IDOC, for this scenario i have to test whether the interafce is working fine or not???
plz help me out

Hi,
first option with adapter
put the message into the JMS queue (depending on the jms provider you use it will be done in a different way)
and check the IDOC in WE02
second option without an adapter
open test page in RWB and put the message there
check the WE02 (IDOC)
remember:
use messages prepared by the one who designed the interface - to check all possible cases
you can also do a stress test if the interface will be passing lots of data
Regards,
Michal Krawczyk

Similar Messages

  • How to test the interfaces in XI ?

    Hi ,
    Our Xi system is being upgraded from 3.0 to 7.0. I was asked to test the interfaces once the upgradation is done. I am not sure how this testing is to be done and will there be aby test plan for this??
    Can some one help me on this ??
    Thanks in Advance,
    Hemanthika

    To test, you must have imported all your scenarios in to your new system.then couple of general tips,
    1.testing can be done only after understanding the scenario.
    For this, u refer to the integration scenario in ur design. so this shall give u an idea about all the systems involved in integration and how the data flowing is between them and what kind of systems they are?
    2. For testdata, you might need of business or functional team as you cannot have any info on the file formats etc(depending on different scenarios invloved like R3, SOAP Databse etc)
    these are only general tips. but u can refer to many of the trouble shooting guides already available blogs in sdn for any sought of inputs.But then, SDN is always there.
    you can test/monitor ur results in RWB->component monitoring
    also in sxmb_moni
    thanks
    kiran
    Edited by: kiran dasari on Mar 17, 2008 4:44 PM

  • Cannot test the Interface mapping for abapmapping

    Dear all,
    i am trying to go to the test tab in the interface mapping foe testing a abap mapping.
    but it is giving me this error " unable to test . you cannot test the program in the test environment "
    is this some authorisation issue

    login to ABAP stack of XI and is the transaction SXI_MAPPING_TEST to test ABAP mapping

  • Problem in testing the Webservice interface?

    Hello All,
    I created and deployed one webservice in the Xi system and SAP communication done using the RFC.
    same like below link.
    http://www.riyaz.net/blog/xipi-consuming-xi-web-services-using-web-dynpro-part-i/technology/sap/6/
    but now problem is the external system is not ready to test the interface, i need to test the interface from the XI end.
    How to test the scenario using other then XMLspy and SOAPUI?
    Thanks and Regards,
    Chinna

    Dear Chinna,
    Is your requirement to make full end-to-end test or make a simulation?
    If you need simulation only, then PI's functionality available in Runtime Workbench and Test Confiuration tool available in Integration Builder and mentioned by Abhishek is OK.
    In case the requirement is to make end-to-end test, I would suggest to use external SOAP client software in order to generate SOAP requests and send them to PI. Please advise why XML Spy and soapUI do not suit you? Actually, you can use any software which can generate SOAP request, send it to the specific endpoint and handle response.
    My regards,
    Vadim

  • How can I test the log in state from in side the Operator Interface code.

    From inside LabVIEW Full OI, I want to test if the operator logged in after the IApplicationMgr Start.
    Right after the IApplicationMgr ‘Start’ I have a loop that tests the IApplicationMgr ‘LoginLogoutRunning’ state and waits until the LoginLogout call back is done.
    I want to exit if the program if operator canceled the login and did not log in.
    I have tried “GetEngine” ref. From there get the “CurrentUser” ref but seems not to contain any information about the Current User.
    How can I test from my Operator Interface code logged in state of the application?
    Thanks
    Jim D.

    Try Engine.CurrentUserHasPrivilege
    For the string parameter 'privilegeName' enter Priv_UserLoggedIn or the string value "*".
    "Priv_UserLoggedIn–(Value: "*") Use this value with the Engine.CurrentUserHasPrivilege method to determine whether a user is logged in."
    Option 2: You could also setup a callback on application manager for UserChanged Event.  If the User is null then the login was canceled.  (see a copy of the help further down)
    From the teststand help for Engine.CurrentUserHasPrivilege method below...
    CurrentUserHasPrivilege Method
    Syntax
    Engine.CurrentUserHasPrivilege ( privilegeName)
    Return Value
    Boolean
    True if the current user has the privilege.
    Purpose
    Confirms whether the current user or any user group that the user is a member of has a specific privilege.
    Remarks
    Returns True when the privilege property is True, when the privilege property of any group that contains the privilege is True, or when privilege checking is disabled, StationOptions.EnableUserPrivilegeChecking is False. If privilege checking is disabled but StationOptions.RequireUserLogin is True, this function returns True only if there is a user currently logged on.
    Parameters
    privilegeName As String
    [In] Specifies the name of the privilege to check. You can specify the name of any privilege property. You can specify the full privilege path in the user privileges property tree, for example, Debug.RunSelectedSteps, or you can specify the base privilege name, RunSelectedSteps. If you specify only the base privilege name and more than one instance of the base privilege name exists, then the method returns the value of the first base privilege it finds with that name. Refer to UserPrivileges for more information.
    Teststand callback for UserChanged Event...
    UserChanged Event
    Syntax
    ControlName_UserChanged ( user)
    Applies To
    ApplicationMgr
    Purpose
    Occurs when the current user logged in changes.
    Remarks
    Use this event to update the parts of your user interface that depend on user permissions when the current user logged in changes.
    Parameters
    user As User
    [In] Current user. If this parameter is NULL, there is no user logged in.

  • Getting error while running the Interface using AGENT

    Hi All,
    i am not able to run the interface using Agent service which running in the another machine, while running i am getting error message like
    java.lang.Exception: Error during Session launching
         at com.sunopsis.dwg.dbobj.SnpSession.remoteExecute(SnpSession.java)
         at com.sunopsis.graphical.l.or.e(or.java)
         at com.sunopsis.graphical.r.z.actionPerformed(z.java)
         at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
         at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(Unknown Source)
         at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
         at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
    i ran the Agent services in Comment prompt, there i am getting the error like follows
    java.lang.NullPointerException
    at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
    at com.sunopsis.dwg.cmd.DwgCommandBase.prepare(DwgCommandBase.java)
    at com.sunopsis.dwg.cmd.e.t(e.java)
    at com.sunopsis.dwg.cmd.h.y(h.java)
    at com.sunopsis.dwg.cmd.e.run(e.java)
    at java.lang.Thread.run(Unknown Source)
    here i have mentioned the steps which i followed for creating agent service.
    i have two machine namely A and B both having the ODI
    i am going to use the B machine as a centralized server. so i edited the odiparams.bat file in B machine in ODI locaiton and filled the repository information
    from A machine i opened the Topology and created the Agent service there i mentioned the HOST name as "B" and port number 20300. and i configure the logical agent aswell
    from B machine i started the Agent service like agentscheduler "-port=20300".
    Agent service launched seccessfully.
    From A machine i tested the Agent. that also shown the successful window message.
    then i started running the interface using the agent i am getting the error which i have mention in the beginging.
    Interface which i ran will do the text file to table loading, so i kept that file in particular location in B machine( i have configure this location when i created the file data store in topology in A machine).
    Please help me to solve the problem...
    thanks
    nidhi
    Edited by: knidhi on Nov 26, 2009 6:54 PM

    Thanks For your Reply,
    I ran the agent as you said. here is my observation
    from the Machine B where agent is actually running, i could able to run the interface using agent service.
    but from the machine A while running the interface i am getting the following error message
    java.lang.Exception: Error during Session launching : Error during Session Preparation : You are trying to execute a session with an agent that is undefined in your repository. Please check the agent -NAME parameter.
         at com.sunopsis.dwg.dbobj.SnpSession.remoteExecute(SnpSession.java)
         at com.sunopsis.graphical.l.or.e(or.java)
         at com.sunopsis.graphical.r.z.actionPerformed(z.java)
         at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
         at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(Unknown Source)
         at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
         at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
         at javax.swing.AbstractButton.doClick(Unknown Source)
         at javax.swing.plaf.basic.BasicMenuItemUI.doClick(Unknown Source)
         at javax.swing.plaf.basic.BasicMenuItemUI$MouseInputHandler.mouseReleased(Unknown Source)
         at java.awt.Component.processMouseEvent(Unknown Source)
         at java.awt.Component.processEvent(Unknown Source)
         at java.awt.Container.processEvent(Unknown Source)
         at java.awt.Component.dispatchEventImpl(Unknown Source)
         at java.awt.Container.dispatchEventImpl(Unknown Source)
         at java.awt.Component.dispatchEvent(Unknown Source)
         at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
         at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
         at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
         at java.awt.Container.dispatchEventImpl(Unknown Source)
         at java.awt.Window.dispatchEventImpl(Unknown Source)
         at java.awt.Component.dispatchEvent(Unknown Source)
         at java.awt.EventQueue.dispatchEvent(Unknown Source)
         at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
         at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
         at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
         at java.awt.EventDispatchThread.run(Unknown Source)
    i have created both physical and logical agent with the same name "DEMO_AGENT", and i ran the agent in the Machine B like
    agentscheduler "-port=20301" "-name=DEMO_AGENT"
    Please help me to solvethe issue...
    Thanks
    Nidhi
    Edited by: knidhi on Nov 27, 2009 11:04 AM
    Edited by: knidhi on Nov 27, 2009 11:04 AM
    Edited by: knidhi on Nov 27, 2009 11:05 AM

  • Error while testing the Webservice

    HI,
    When I Tried the Same It is showing an Error"Error in Sending the Soap Data"
    When i teted the configuration it is showing an error in message interface,but is there and running fine when tested
    Hi,
    When I am Testing the same in the Altova,I am Getting an error as Below
    "<SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
    <SOAP:Body>
    <SOAP:Fault>
    <faultcode>SOAP:Server</faultcode>
    <faultstring>System Error</faultstring>
    <detail>
    <s:SystemError xmlns:s="http://sap.com/xi/WebService/xi2.0">
    <context/>
    <code>RCVR_DETERMINATION.MESSAGE_INCOMPLETE</code>
    <text>Message is incomplete. No Sender found</text>
    </s:SystemError>
    </detail>
    </SOAP:Fault>
    </SOAP:Body>
    </SOAP:Envelope>
    I Configured all the Required in Id and Tested the Design in the IR.
    Thanks,
    Srinivasa

    Hi Srinivas,
    Check these threads..
    RCVR_DETERMINATION: MESSAGE_INCOMPLETE
    BPM Message is incomplete. No Sender found
    cheers,
    Prashanth
    P.S Please mark helpful answers

  • Error While Testing the Data from RWB

    Hi Gurus,
    While testing the data from my RWB --> Component Monitoring -->IE -->Test Message
    I am getting the error as explained below:
    Error while sending Message -->RWB
    No header Mapping Defined -->Trace
    Moreover when i was assigning Inbound Interface in the Interface Determination its shows in the popup window NOObjects Found instead of showing the Inbound interfaces.
    Any help on this please
    Regards
    Sreeni

    Hi ,
    without completing your  configuration how are you testing your interface??
    1)you need to add your source and receiver interfaces in business service,select your business service then add your outbound interface in sender tab and add your inbound interface in receiver tab,if it is business system not required.
    2) then check your interface/operation mapping done perfectly between source and target interfaces.
    if you have above steps done perfectly then your interface will work.
    if you still getting error search in sdn with error message you will find  usefull tips..or post in sdn.
    Regards,
    Raj

  • Error while Testing the Inbound Function Module

    Hi,
           I have created a Z Function Module (Posting Program) for Testing the EDI Shipment Tender Status. When I try to process the IDoc with the Transaction WE19 and when I enter the name of the Z function Module , it gives me an error saying that "Interface for Function Zxxxx is incorrect". Can somebody give me a solution for this? Answer would attract reward points.
    Thanks,
    Venkat.

    Hi,
    You need to register this Function Module against Message Type.
    Transaction code is : WE57.
    Nilesh

  • XML Spy Error while testing the SOAP request

    Hi,
    I have generated a webservice from an XI scenario, I am trying to test the webservice through XML Spy.
    I am getting the following error when I am sending the SOAP request.
    Where do we specify the authentication information (user/pwd) in XML Spy.
    It is not even poping any screen to enter username and password.
    <b><i>HTTP Error: Could not post the file.</i></b>
    http://banglore:50100/XISOAPAdapter/MessageServlet?Version=3.0&Channel=:New_BP:New_BPFileSender&version=3.0&Sender.Service=New_BP&Interface=http%3A%2F%2Fgemsconsult.com%2Ffile2rfc%5EZBP_OUTPUT
    Appreciate your quick response
    Srini

    Hi,
    Try using SOAP client
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9b16d790-0201-0010-4e9b-baa5f42830d8
    Thanks,
    Prakash

  • The interface you are trying to use is related to a logical schema that no

    "The interface you are trying to use is related to a logical schema that no longer exists"
    I'm facing this error when importing a project on Designer connect to a new work repository.
    I have an TEST Data Integrator environment and now I need to move objects already created to a new DEV environment. I've created a new master and work repository with distinct ID's according note https://metalink.oracle.com/metalink/plsql/f?p=130:14:4335668333625114484::::p14_database_id,p14_docid,p14_show_header,p14_show_help,p14_black_frame,p14_font:NOT,423815.1,1,1,1,helvetica
    Any ideas?
    Thanks

    Hi,
    Nothing occurs. My steps:
    1) Export Master Repository from 1st environment (topoloy -> export master repository)
    2) Create Master Repository on 2nd environment (through repcreate.bat)
    3) Export Topology (1st environment)
    4) Export all projects (1st environment)
    5) Import Topology (2nd environemtn) ----> com.sunopsis.core.n: This import action has been cancelled because it could damage your repository (problem with the identifier sequences)
    Is this sequence of operations correct?
    Thanks

  • How to test the payload in XI

    Hi all,
    could please explain how to test the payload in xi and with steps.
    Thanks in advance,
    Radhika

    Hi Radhika,
    You can test in three ways.
    1.)  In message mapping directly give the relevant data and then execute.  Here you can test whether the mapping is correct or not.
    2.)  In Integrstion Directory after completing and activating  the Configuration,  in tool you can find the Test Configuration tab. There you can give the sender and receiver details along with payload. Here you can test whether the Configuration is correct or not.
    3.)  In RWB in COmponent monitoring.  Select the Integration Engine Monitoring. Here give the sender and receiver details, Interface name, name space, Quality of service.
    Now give user name and pass word.
    Paste the payload from massage mapping and then press test tab.  Here yoyu can directly send the message from XI server to the receiver system.
    Ok,
    Jeevan

  • Getting Java mapping errors when testing my Interface mapping

    Hi,
    I'm trying to test my interface mapping from IR, I keep getting these exceptions. All I'm doing in my interface mapping is I have two mapping programs a XSLT mapping with java helper functions with the XSL and a message mapping. In the test it pass thru the XSLT mapping but fails at Message mapping and throws the following exception. Any help on this is really appreciated.
    10:03:26 Start of test
    Call XSLT processor with stylsheet com/earthlink/xi/mapping/xmlc_to_crm_resp.xsl.
    START APPLICATION TRACE ***
    Response:
    0
    END APPLICATION TRACE ***
    Returned form XSLT processor.
    Call method execute of the application Java mapping com.sap.xi.tf._MM_XMLC_RESP_
    Error during appliction Java mapping com/sap/xi/tf/_MM_XMLC_RESP_
    java.lang.NullPointerException at com.sap.aii.mappingtool.tf3.AMappingProgram.exceptionCaught$(AMappingProgram.java:59) at com.sap.aii.mappingtool.tf3.Transformer.checkParserException(Transformer.java:182) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:149) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:102) at com.sap.aii.ibrep.server.mapping.ibrun.RepJavaMapping.execute(RepJavaMapping.java:73) at com.sap.aii.ibrep.server.mapping.ibrun.RepSequenceMapping.execute(RepSequenceMapping.java:54) at com.sap.aii.ibrep.server.mapping.ibrun.RepMappingHandler.run(RepMappingHandler.java:80) at com.sap.aii.ibrep.server.mapping.rt.MappingHandlerAdapter.run(MappingHandlerAdapter.java:107) at com.sap.aii.ibrep.server.mapping.ServerMapService.transformInterfaceMapping(ServerMapService.java:127) at com.sap.aii.ibrep.server.mapping.ServerMapService.transform(ServerMapService.java:104) at com.sap.aii.ibrep.sbeans.mapping.MapServiceBean.transform(MapServiceBean.java:40) at com.sap.aii.ibrep.sbeans.mapping.MapServiceRemoteObjectImpl0.transform(MapServiceRemoteObjectImpl0.java:167) at com.sap.aii.ibrep.sbeans.mapping.MapServiceRemoteObjectImpl0p4_Skel.dispatch(MapServiceRemoteObjectImpl0p4_Skel.java:104) at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:320) at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:198) at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:129) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    10:03:26 End of test

    Joe,
    most likely your XSLT is outputting a not well-formed XML message.
    Remove message mapping from the mapping list and execute it again, to check output.
    Also, for mapping debugging in java enhanced function inside XSLT mappings, use the following:
    1st, you need to pass the "inputparam" parameter from the XSLT runtime to the Java function (it needs to be one of the input parameters for the executed java function).
    In the Java code itself, implement the following code:
    AbstractTrace trace = (AbstractTrace) param.get(StreamTransformationConstants.MAPPING_TRACE);
    trace.addInfo("Log your message here!");
    where <i>param</i> is the input parameter refering to the <i>inputparam</i> from XSLT.
    The AbstractTrace and StreamTransformationConstants classes can be found in the aii_map_api.jar file (used in Java mappings).
    Regards,
    Henrique.

  • Error in Testing the configuration

    Hi All,
    In File to IDoc scenarion when I am testing the Configuration in the ID-> Testconfiguration
    Sender Agreement,  Receiver Determination and Interface Determination is displaying as green but Interface mapping showing as red. IR there is no error in Interface Mapping.
    I am getting the following error in Interface mapping.
    *Interface Mapping
    com.sap.aii.utilxi.misc.api.BaseRuntimeException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException: XML Declaration not allowed here.(:main:, row:1, col:7) at com.sap.aii.mappingtool.tf3.Transformer.checkParserException(Transformer.java:187) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:151) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:105) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:64) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:92) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:68) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0_0.processFunction(MappingServiceObjectImpl0_0.java:131) at sun.reflect.GeneratedMethodAccessor642.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187) at $Proxy189.processFunction(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.call(RFCDefaultRequestHandler.java:277) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:219) at com.sap.engine.services.rfcengine.RFCJCOServer$J2EEApplicationRunnable.run(RFCJCOServer.java:254) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170) Root Cause: com.sap.aii.utilxi.misc.api.BaseRuntimeException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException: XML Declaration not allowed here.(:main:, row:1, col:7) at com.sap.aii.mappingtool.tf3.rt.xparser.MTSaxHandler.run(MTSaxHandler.java:157) at com.sap.aii.mappingtool.tf3.rt.xparser.XParser.run(XParser.java:73) at java.lang.Thread.run(Thread.java:534) Root Cause: com.sap.engine.lib.xml.parser.NestedSAXParserException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException: XML Declaration not allowed here.(:main:, row:1, col:7)(:main:, row=1, col=7) -&gt; com.sap.engine.lib.xml.parser.ParserException: XML Declaration not allowed here.(:main:, row:1, col:7) at com.sap.engine.lib.xml.parser.XMLParser.scanPI(XMLParser.java:2126) at com.sap.engine.lib.xml.parser.XMLParser.scanProlog(XMLParser.java:2774) at com.sap.engine.lib.xml.parser.XMLParser.scanDocument(XMLParser.java:2830) at com.sap.engine.lib.xml.parser.XMLParser.parse0(XMLParser.java:229) at com.sap.engine.lib.xml.parser.AbstractXMLParser.parseAndCatchException(AbstractXMLParser.java:145) at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:160) at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:261) at com.sap.engine.lib.xml.parser.Parser.parseWithoutSchemaValidationProcessing(Parser.java:280) at com.sap.engine.lib.xml.parser.Parser.parse(Parser.java:342) at com.sap.engine.lib.xml.parser.SAXParser.parse(SAXParser.java:125) at javax.xml.parsers.SAXParser.parse(SAXParser.java:345) at com.sap.aii.mappingtool.tf3.rt.xparser.MTSaxHandler.run(MTSaxHandler.java:155) at com.sap.aii.mappingtool.tf3.rt.xparser.XParser.run(XParser.java:73) at java.lang.Thread.run(Thread.java:534) -
    at com.sap.engine.lib.xml.parser.SAXParser.parse(SAXParser.java:144) at javax.xml.parsers.SAXParser.parse(SAXParser.java:345) at com.sap.aii.mappingtool.tf3.rt.xparser.MTSaxHandler.run(MTSaxHandler.java:155) at com.sap.aii.mappingtool.tf3.rt.xparser.XParser.run(XParser.java:73) at java.lang.Thread.run(Thread.java:534) Caused by: com.sap.engine.lib.xml.parser.ParserException: XML Declaration not allowed here.(:main:, row:1, col:7) at com.sap.engine.lib.xml.parser.XMLParser.scanPI(XMLParser.java:2126) at com.sap.engine.lib.xml.parser.XMLParser.scanProlog(XMLParser.java:2774) at com.sap.engine.lib.xml.parser.XMLParser.scanDocument(XMLParser.java:2830) at com.sap.engine.lib.xml.parser.XMLParser.parse0(XMLParser.java:229) at com.sap.engine.lib.xml.parser.AbstractXMLParser.parseAndCatchException(AbstractXMLParser.java:145) at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:160) at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:261) at com.sap.engine.lib.xml.parser.Parser.parseWithoutSchemaValidationProcessing(Parser.java:280) at com.sap.engine.lib.xml.parser.Parser.parse(Parser.java:342) at com.sap.engine.lib.xml.parser.SAXParser.parse(SAXParser.java:125) ... 4 more com.sap.aii.ibrun.server.mapping.MappingRuntimeException: Runtime exception occurred during execution of application mapping program com/sap/xi/tf/_MM_EMPData_HRMD_: com.sap.aii.utilxi.misc.api.BaseRuntimeException; Fatal Error: com.sap.engine.lib.xml.parser.ParserException: XML Declaration not allowed here.(:main:, row:1, col:7) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:73) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:92) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:68) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0_0.processFunction(MappingServiceObjectImpl0_0.java:131) at sun.reflect.GeneratedMethodAccessor642.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187) at $Proxy189.processFunction(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.call(RFCDefaultRequestHandler.java:277) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:219) at com.sap.engine.services.rfcengine.RFCJCOServer$J2EEApplicationRunnable.run(RFCJCOServer.java:254) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170) Root Cause: com.sap.aii.utilxi.misc.api.BaseRuntimeException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException: XML Declaration not allowed here.(:main:, row:1, col:7) at com.sap.aii.mappingtool.tf3.Transformer.checkParserException(Transformer.java:187) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:151) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:105) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:64) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:92) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:68) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0_0.processFunction(MappingServiceObjectImpl0_0.java:131) at sun.reflect.GeneratedMethodAccessor642.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187) at $Proxy189.processFunction(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.call(RFCDefaultRequestHandler.java:277) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:219) at com.sap.engine.services.rfcengine.RFCJCOServer$J2EEApplicationRunnable.run(RFCJCOServer.java:254) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170) Root Cause: com.sap.aii.utilxi.misc.api.BaseRuntimeException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException: XML Declaration not allowed here.(:main:, row:1, col:7) at com.sap.aii.mappingtool.tf3.rt.xparser.MTSaxHandler.run(MTSaxHandler.java:157) at com.sap.aii.mappingtool.tf3.rt.xparser.XParser.run(XParser.java:73) at java.lang.Thread.run(Thread.java:534) Root Cause: com.sap.engine.lib.xml.parser.NestedSAXParserException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException: XML Declaration not allowed here.(:main:, row:1, col:7)(:main:, row=1, col=7) -&gt; com.sap.engine.lib.xml.parser.ParserException: XML Declaration not allowed here.(:main:, row:1, col:7) at com.sap.engine.lib.xml.parser.XMLParser.scanPI(XMLParser.java:2126) at com.sap.engine.lib.xml.parser.XMLParser.scanProlog(XMLParser.java:2774) at com.sap.engine.lib.xml.parser.XMLParser.scanDocument(XMLParser.java:2830) at com.sap.engine.lib.xml.parser.XMLParser.parse0(XMLParser.java:229) at com.sap.engine.lib.xml.parser.AbstractXMLParser.parseAndCatchException(AbstractXMLParser.java:145) at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:160) at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:261) at com.sap.engine.lib.xml.parser.Parser.parseWithoutSchemaValidationProcessing(Parser.java:280) at com.sap.engine.lib.xml.parser.Parser.parse(Parser.java:342) at com.sap.engine.lib.xml.parser.SAXParser.parse(SAXParser.java:125) at javax.xml.parsers.SAXParser.parse(SAXParser.java:345) at com.sap.aii.mappingtool.tf3.rt.xparser.MTSaxHandler.run(MTSaxHandler.java:155) at com.sap.aii.mappingtool.tf3.rt.xparser.XParser.run(XParser.java:73) at java.lang.Thread.run(Thread.java:534) -
    at com.sap.engine.lib.xml.parser.SAXParser.parse(SAXParser.java:144) at javax.xml.parsers.SAXParser.parse(SAXParser.java:345) at com.sap.aii.mappingtool.tf3.rt.xparser.MTSaxHandler.run(MTSaxHandler.java:155) at com.sap.aii.mappingtool.tf3.rt.xparser.XParser.run(XParser.java:73) at java.lang.Thread.run(Thread.java:534) Caused by: com.sap.engine.lib.xml.parser.ParserException: XML Declaration not allowed here.(:main:, row:1, col:7) at com.sap.engine.lib.xml.parser.XMLParser.scanPI(XMLParser.java:2126) at com.sap.engine.lib.xml.parser.XMLParser.scanProlog(XMLParser.java:2774) at com.sap.engine.lib.xml.parser.XMLParser.scanDocument(XMLParser.java:2830) at com.sap.engine.lib.xml.parser.XMLParser.parse0(XMLParser.java:229) at com.sap.engine.lib.xml.parser.AbstractXMLParser.parseAndCatchException(AbstractXMLParser.java:145) at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:160) at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:261) at com.sap.engine.lib.xml.parser.Parser.parseWithoutSchemaValidationProcessing(Parser.java:280) at com.sap.engine.lib.xml.parser.Parser.parse(Parser.java:342) at com.sap.engine.lib.xml.parser.SAXParser.parse(SAXParser.java:125) ... 4 more
    IN the ID we are having the Interface Mapping.
    Anybody can help me on this?
    Regards
    SRee

    Hi Per,
    while testing the configuration, by copying the payload from the Message Mapping(after emtering the values in Message and source xml) and placed in thte Configuration Testing.
    As part of Payload the -(hypen) placed in front of the XML tags in the Payload, So that error repeats, When  deleted those -'s it works properly.
    Regards
    Sridhar goli

  • I want to edit properties of the interface windows opened while "Open File", "Save Page As" and interface opened during Downloading of any file.

    I am doing a small project on dedicated web client where in user automatically logs in non-root user and Firefox automatically starts.
    I am using Fedora 14 kernel 2.6.35.12-88.fc14.i686 and Firefox 3.6.16.
    I have installed only Gnome in my computer with no Nautilus or other file browser on it.
    I want to edit properties of the interface windows opened while "Open File", "Save Page As" and interface opened during Downloading of any file.
    Please guide me for this.

    First, I sent an email to the author of PhotoME to inform him of the serious issues his addon caused with Firefox latest versions.
    Now, for those of you who do not have the PhotoME addon and yet experience the same problem that I had and that I described above, I suggest the following strategy.
    As PhotoME did cause these problems with Firefox latest versions, I am pretty covinved other addons probably might cause these problems too. Therefore, adopt the following method.
    Test one addon at a time to see if this particular addon is behind your Firefox issues like the ones I had.
    So, disable one addon only at a time. Then close your Firefox and restart it from scratch and see if you still have your Firefox problems. You must restart the Firefox browser from scratch. If you still have these Firefox problems, re-enable the disabled addon, restart your Firefox (again!) and repeat the same method for every single addon that you have.
    Try to be selective by choosing first addons that are more likely to cause your Firefox problems such as not very well-known or not very popular addons (like it was the case for the PhotoME addon).
    If this method works or if it does not work, report it on this web page so that others can be helped with your comments.
    I hope this method will help you because I was really upset that I had these Firefox problems and I first thought it was the fault of Firefox, only to discover later that this PhotoME addon was the culprit and had caused me such upset.

Maybe you are looking for

  • Edit 1080p with QT7 without losing any quality?

    I suspect and hope this one's a quick Y/N for someone out there ... I'm editing my first full HD movie. The footage comes off a Sony DSC-HX9V point & shoot as 1080p at 60fps,  AVCHD format (.MTS), which I re-wrap as .MOV using Media Converter w/uncom

  • Report Painter Change Description  ( Read it, Please )

    Hi Please, How to change the description of a field based on sets ?? Example Report painter Report 1 2 3 all fields <------- I need to change this description but I do not get ( It's a default name ? ) 1 10 20 *all fields <------- I need to change th

  • Retrieving clob locator

    I am having trouble retrieving a clob locator from a column despite being able to set it in a previous statement. The clob is always returned as null. This happens to both an 8.1.6 and 8.1.7 with the latest classes12.zip Thanks, -elliott Here is my c

  • XI acknowledge from BPM

    HI Experts, Trying to make acknowledge from XI to R/3 through BPM but get error message “Unable to convert the sender service <BPM_Process> to an ALE logical”. The XI process flow is from SAP with Idoc to XI – BPM and to JDBC. Have check setting in A

  • User Defined datatypes

    Hello, Is there any way we can make user defined datatypes in oracle as we do in Microsoft SQL / Sybase ASE. I tried using Abstract TYPE but using it changes the Select query. I need to migrate some Sybase code to Oracle and also need to implement th