TestStand 2010 Deployment not including TestStand VIs in deployment

Hi all,
I have a question about a deployment I am trying in TestStand 2010, having just recently upgraded from 4.2.1. I was building a particular deployment with no issues in TS 4.2.1, using LV 2010. The VIs in the project use the TestStand Get/Set Property VIs quite a bit, and in the 4.2.1 support VIs directory, you can see them there.
However, using the same deployment configuration, I tried to build the deployment in TS 2010. This deployment didn't have any of the TestStand VIs which were present in the 4.2.1 deployment. As a result, VIs that call the TestStand VIs are reported as broken. Note that the VIs were created while I was using 4.2.1, so the TestStand VIs are for that version (it has never been an issue for previous upgrades, however).
Recap:
TS 4.2.1, LV2010 - Deployment works fine
TS 2010, LV2010, using same deployment configuration file - Deployment broken, no TS VIs included in support VIs
Ideally I'd like to sort this out at a deployment level, rather than employ any workarounds. Is there a difference in the TS 2010 and 4.2.1 VIs? Or am I missing something glaringly obvious?
Any help is greatly appreciated!
Thanks,
Rob
Rob Greene,
ATE Engineer,
Benetel Ltd.

Rob,
I tried a small demo using TS2010 and LabVIEW 8.6.1 (only have this on my system at present)
When I created my deployment image, I open the LLB that was created and present in the LLB was TestStand - Get Property Value (Number).vi.
I then changed one of the options in the LabVIEW VI Options dialog so that I excluded files from VI lib and then rebuilt the Deployment image, TestStand - Get Property Value (Number).vi was missing, as expected.
So It seems to be working for TS2010 and LabVIEW 8.6.1.
Can you check that you haven't got any options selected that are excluding files.
Regards
Ray Farmer

Similar Messages

  • Outlook 2010 mail not included in control panel setup??

    I installed the iCloud 2.1.1 control panel, using Windows 7, selected "mail, calendars, contacts, & tasks" to setup.  A pop-up window stated iCloud was configuring Outlook.  When the outlook setup for iCloud was finished, the message stated iCould was now set up for my calendars, contacts, and tasks.  NOT my mail.  Why would it exclude configuring my @me.com or @icloud.com account from Outlook?  I want to use my icloud mail account through outlook WITHOUT creating a separate data file from the one iCloud created when it configured everything else.  Any ideas?

    Hi and Welcome to the Community!
    Please see this KB to see if it applies to your situation:
    KB24040 Support for Microsoft Office 2010 Click-to-Run installation
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Hi, I am from Palestine trying to use visa card to purchase an application. It doesn't work because my country seems not included in the list. I hope to find a solution for that . Thanks in advance

    my country is not included for visa card options

    Nope. You can only have one credit card attached to an account at a time. Its not that big of a deal to use two accounts, users do this all the time. Create the second account(UK Account) in iTunes on your computer...sign out of your Italian account first. Then authorize your computer for this new account: Store>Authorize this computer. Then sync your phone. Now, to switch accounts on your phone: Settings>Store...tap the ID shown...sign out...then sign back in with the ID you want to use.

  • By default, Teststand will not include the test step result in subsequence, is there any way to include these step result in report?

    By default, Teststand will not include the test step result in subsequence, is there any way to include these step results in report?
    Thanks
    Jacky

    Hi,
    If your subsequence is in a separate sequencefile, then check the properties of the sequencefile to make sure that the record has not been disabled.
    Regards
    Ray Farmer
    Regards
    Ray Farmer

  • When I send e-mail messages with file by using a POP3 in Exchange 2010 I received delivered message with file. How I can disable this functions that file do not include to delivery message. I use Exchange 2010 only local users.

    When I send e-mail messages with file by using a POP3 in Exchange 2010 I received delivered message with file. How I can disable this functions that file do not include to delivery message.  I use Exchange 2010 only local users.

    I think there is not native rule for this, but you could try a transport rule which removes all attachments over a very small file size like 1KB.
    http://blogs.technet.com/b/exchange/archive/2009/05/11/3407435.aspx
    CRM Advisor

  • Project librarys not included in WAR file with deployment (WEB-INF/lib)

    Using JDeveloper 9.0.5.2
    Project Libraries are not included in WEB-INF/lib when deploying. Although the files are selected in the deployment file at 'Contributors'. Within the 'filter' the .jar files are missing.
    To solve it i have to register again (i have already made the librarys project library's) the files within Tools->ManageLibrarys as user library's.
    The other workaround is to make the library's System Library's within the project.
    In my opinion it is a bug that you must include the project librarys as user librarys within the 'LibraryManager'

    Unfortunately no, the issue with output folder being ignored occurs only with example apps bundled with Workshop product.
    You can try the following workaround:
    - In Workshop, Project > Properties - Java Build Path, switch to Source tab - "Remove the source folder listing" - Click OK and dismiss Properties window.
    - Project > Properties - Java Build Path > Source Tab, add the same source folder entry - Click OK
    - Export as WAR
    With this you should see the class files bundled under output directory structure (Ex: WEB-INF/classes).

  • LabView 2010 Applicatio​n Builder for EXE Always Included files are not Included

    In LabVIEW 2010 F2, When I am using the Application Builder to build an EXE file, I have listed 10 or so files to Be "Always Included". But when I Explore the directory where the EXE was built, those "Always Included" files are not there or in any subdirectory under the EXE file.
    This frequently makes my EXE file not work properly because important files are missing. I have to spend extra debugging time to find out the the cause of my problem is missing files that the Application Builder should have transferred "Always".
    Why did the Application Builder, when building an EXE target, not include the files that should be "Always Included"?
    Why does the Application Builder ignore these files specifications?

    Dennis Knutson wrote:
    The build does include files you select. Post an example project with a small VI and some separate files where this does not happen.
    No, it does not appear that all of the files that I listed in the "Always Include" list are copied during the Build process to the Build directory or any subdirectory under that.
    The Build Source Files.jpg file shows most of the list of the files that should be "Always Included". Notice the .VI and .ctl files that are listed
    The Build Directory.jpg file shows the file in the Build directory that were built.
    The Data Directory.jpg file shows the data directory under the Build directory and may include some of the files listed in the "Always Include", but not all of them.
    The other subdirectories under the Build directory were created by me and do not include any files that were copied during the Build process.
    So not ALL of the files that were included in the "Always Include" list were copied into the Build directory area as expected. ALL of the files that are listed as "Always Include" should be copied, if they exist. Those files existed when then were selected for the List and they existed at the time of the Build.
    I can not include an example project that demonstrates this. I am prevented from doing so by the terms of an NDA. You are going to have to take my word that this event is real and happens the same way every time. This information should be sufficient for someone to investigate why do not ALL of the files listed in the "Always Include" list are copied into the Build directory area regardless of the file type or contents.
    Attachments:
    Build Source Files.jpg ‏151 KB
    Build Directory.jpg ‏125 KB
    Data Directory.jpg ‏131 KB

  • .ear file is not including all the required files for deployment

    While deploying from JDeveloper, some of the files (eg. <Project>.cpx file, .class file) are not included in the .ear file.
    Pls help.

    Is the .ear file deployed with the Deploy to EAR file selection?

  • Mac Book Pro mid 2010, bought the Mountain Lion but not included with iPhoto?

    My friend bought the mountain lion yesterday, but iphoto and photostream not included in package?(model, mid 2010) Need to buy separate? If this so, why mine(model june 2012) just upgraded, have iPhoto with it?Any help will be appreciated

    Do you still have the install discs from your original 2009 computer? It comes with two discs, the applications and the OS X install disc. You need the applications disc that has the installer. I used those on mine, then manually upgraded the 9.0 to 9.1, then 9.3.2.
    9.1 update http://support.apple.com/kb/DL1322
    9.3.2 update http://support.apple.com/kb/DL1562
    Some people lost their discs in the past, and have ventured to talk to the Apple store. May be worth trying if you cannot find the discs. No guarantee of help though.

  • Test Stand 2010 Deployment tool Error

    Dear All,
    Whilst attempting to deploy a Test Stand system I am coming across the following error:
    Error: Unable to find all subVIs from saved VIs. Either a subVI is missing or the VI is not saved in the current LabVIEW version.
    The call chain to missing VIs:
    1 - initialise_resistor_card.vi
        2 - pipx40 Initialize.vi (missing)
    I have the Teststand Adaptor set to Labview Run-time Engine --> "Auto detect using VI version"
    This is a new feature in Test Stand 2010 right? So is the deployment tool also able to inherit the ability to auto detect the version of runtime engine to use on a deployed machine?  
    Any ideas?
    Regards
    There is no problem with the VI within the sequence.
    I've encountered this before before with the deployment tool and usually mass compilling or opening and closing the VIs heirarchy helps, but in this case I just can't get the deployemnt tool to process these VIs.

    Hello,
    So it would appear that the VIs giving the problem are within .llb . 
    If I open and save them again within the .llb and mass compile the .llb then the same happens, but if I take the VI out of the llb then the problem goes away?
    Is there any known issues with the Deployment Utility failing to find VIs with llbs? I notice TS 2010 deployment utility introduces the idea of a Packed Project library option rather than the old SupportVIs folder, could using this be the issue?
    Regards
    Matt

  • Project Server 2010 / Sharepoint 2010 Permissions not syncing to Project Site

    Project Permissions not syncing to Project Site
    Project Manager Group
    New project is created and published project server sends permissions to Sharepoint which puts users into the following groups:
    <dir><dir></dir></dir><dir><dir>
    Web Administrator (Microsoft Project Server)
    Project Managers (Microsoft Project Server)
    Team members (Microsoft Project Server)
    Readers (Microsoft Project Server)
    At this time the creator/owner, owner’s management, portfolio managers, and executives should all have Project Manager rights on the sharepoint site, and Admins will have Web Admin permissions.
    Issue #1: Only the Web Admin permissions and creator/owner permissions are being added to the Sharepoint permission groups
    Workaround #1: Going into the project site permissions and adding the
    Project Managers (Microsoft Project Server) group manually and the sync will keep the permissions
    Workaround #2: Going into the Server Settings, Manager Groups then removing or add all users to the No Permission Group, which forces an sync to all workspaces. Con: This workaround can only be down at night when users are not active since it will
    block the queue for at least an hour.
    Project Owner Transfer
    Previously created project has owner change, once saved and published project server sends permissions to update user’s permission to
    Project Managers (Microsoft Project Server) on Sharepoint project site.
    Issue #2: When Project owner is changed and project is published the owner is not getting permissions to the Sharepoint project site. However, if owner is also added to the team using the Build Team Feature the sync will give the owner Project
    Manager permissions on the Project Site.
    Workaround #1: Going into Server Settings, Project Sites, select project and Synchronize. Once this is done, the owner will have Project Manager Permissions without being added to the team.
    Users who have been added to this project in Project Server 2010, but not assigned to tasks. Users who have assignments in this project in Project Server 2010 and are contributors to the project workspace site,
    meaning that they can create and edit documents, issues, and risks. Users who have published this project or who have
    Save Project permission in Project Web App and are contributors to the project workspace site, meaning that they can create and edit documents, issues, and risks. Users who have
    Manage SharePoint Foundation permission in Project Web App and are contributors to the project workspace site, meaning that they can create and edit documents, issues, and risks.</dir></dir>

    By default when you create project build team add users in the task and publish the project plan then All the User which are available in the project plan including Project owner will go to below mentioned group in project site:
    1. creator/owner, owner’s management, portfolio managers, and executives should all have Project Manager will get access to Project Managers (Microsoft Project Server)
    2. User who are having team member access to PWA will get Team members (Microsoft Project Server) access if they are assigned to the project task.
    3. User who are having team member access to PWA will get Readers (Microsoft Project Server) access if they are not assigned to the project task.
    4. Only PWA Administrator will get the access to Web Administrator (Microsoft Project Server)
    Sharepoint permission you have to use when you want to give permission manually to users on project site  
    In the Project Site provisioning setting under Server setting if you have Check to automatically synchronize Project Web App users with Project Sites when they are created, when project managers publish projects, and when user permissions change in Project
    Server.
    Then all the user get access as per describe above and if you will give access manually to any of the user either in project server group or in Sharepoint group once you will publish the project next time all the manually given permission will go away.
    IF you want to give permission to user manually to sharepoint group or project server group then uncheck automatically synchronize Project Web App users with Project Sites when they are created, when project managers publish projects, and when user permissions
    change in Project Server.
    You check PWA site setting --> Site permission then member of Sharepoint group user who will have access to sharepoint group in PWA site setting site permission will have access to all the project site sharepoint group as Project site inherit permission
    from PWA root site.
    Both the issue which you have described is behavior of project site.
    For issue 2 when first time project owner create and publish the project and projectsite is getting created then porject owner name gets access  in the porject manager (project server group) nect time if you will change the owner and publish the project
    until he will not present in the project plan will not get the permission.
    If you want to give sharepoint permission to users then uncheck automatically synchronize Project Web App users with Project Sites when they are created, when project managers publish projects, and when user permissions change in Project Server and give
    the permission manually. 
    Project site in 2010 has some issue and not full filling customer need some time ,Ms has came up with 2013 which is having tight integration with project sites .
    Project workspace security groups are equal to the SharePoint Server 2010 security groups.
    Web Administrator equals Full Control
    Project Managers equals Design
    Team members equals Contribute
    Readers equals Read
    Users who have Manage
    SharePoint Foundation permission in Project Web App and are contributors to the project workspace site, meaning that they can
    create and edit documents, issues, and risks will get access to Web Administrator (Microsoft Project Server)
    http://technet.microsoft.com/en-us/library/cc197668(v=office.14).aspx
    kirtesh

  • Adobe Flash support is not included in BlackBerry 10 OS version 10.3.1 Browser

    Adobe Flash support is not included in BlackBerry 10 OS version 10.3.1 Browser   
    Blackberry 10 OS has been on the market for the past two years, and we continue to have the highest mobile HTML5 test score . We understand how important web browsing is to you, which is why we have always invested in giving you the best possible web browsing experience.
    During this time Adobe has stopped Flash development support for mobile browsers. This is consistent with the shift of mobile web content generally moving towards HTML5. As a result we can no longer support Adobe Flash beginning with the upcoming software release of BlackBerry 10 OS version 10.3.1.
    We understand this may affect your web browsing experience and are working hard with major partners to lessen the effect this might have.
    If you are a web developer, BlackBerry 10 supports a wide variety of media codecs, formats, and network protocols . If you have any questions on implementing video or audio on BlackBerry 10 please head over to our development forum and we will be happy to assist you.
    Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
    Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
    Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
    BESAdmin's, please make a signature with your BES environment info.
    SIM Free BlackBerry Unlocking FAQ
    Follow me on Twitter @knottyrope
    Want to thank me? Buy my KnottyRope App here
    BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

    What a Shame. Flash could have been left in. Many older sites use it and will not be updated anytime soon if ever. Now we have to hack around to get it working ourselves.

  • Win 7 "Default Programs" does not include MS Office 2007 Programs, the missing Programs are missing ICONs as well

    I installed Windows 7 in an upgrade from Windows XP.  As part of the process MS gave me a URL to download a Office 2007 Pro I could activate with the license key I owned.  I got similar URLs for Visio Professional and Project Professional. 
    Downloaded, installed, activated, started the programs.
    From the beginning some of the icons were missing.  Like the icons for Word, Excel, Access, Outlook, Power Point, Publisher, Visio, and of course Project.  I tried most of the answers in this forum, that didn't sound like guesswork, and none of
    them solved either problem.  There must be at least 65 guesses to fix the icon problem, but none with the missing Default Programs problem.
    The programs related to the missing "Default Programs" still work, they startup when you select the related document.  If I check "Associate a File Type or Protocol with a Specific Program" the missing Office 2007 programs are listed
    there, associated with the designated programs, but are missing icons.
    I make it a habit not to pay a vendor for a product so that I can have the privilege of fixing the vendor's problems.   Google tells me these are well known problems.  The only thing missing is the answer.  I won't ever use MS chat or telephone,
    because all they do is tell me why they can't help and transfer me elsewhere.
    Does anyone have a REAL answer please?

    To restore office icons you could try this method
    http://transitionmarketing.wordpress.com/2013/01/16/restoring-microsoft-office-icons/
    I had the same problem with Office 2010 programs not showing in "Set Your Default Programs". No other "fixes" (including repair) worked. Found this thread:
    http://www.sevenforums.com/microsoft-office/222503-office-2010-not-listed-default-programs.html
    and used it as a guide. When you look at this key
    HKEY_LOCAL_MACHINE\SOFTWARE\RegisteredApplications
    you will see a list of software pointing to another HKEY_LOCAL_MACHINE registry key. For example, my Word program was showing up as "Word.Application.14" and pointing to Software\Clients\Word Processing\Microsoft Word\Capabilities
    (In contrast, PastorMike's fix in the link above advocates making a new entry under HKEY_LOCAL_MACHINE\Software\Microsoft\Office\14.0\Word\Capabilities. However, OneNote did appear in my "Set Your Default Programs" and it - and the other Office programs
    - were listed under ..\Software\Clients\... and not ...\Software\Microsoft\...)
    So at this point I went my own way (although maybe PastorMike's fix would also work).
    The difference between OneNote and the other programs was the existence of values for "ApplicationName"  and "ApplicationDescription" in HKEY_LOCAL_MACHINE\Software\Clients\Word Processing\Microsoft Word\Capabilities. Also, for OneNote
    there was a "FileAssociations" sub-key that was missing from the other programs.
    It is setting the values for ApplicationName and ApplicationDescription which cause the program to show up in the list in the left pane of "Set Your Default Programs". And it is the file associations in the FileAssociations key that allows resetting
    associations en masse when they are snaffled by another program.
    Below is the reg file I added for Word 2010. (i used similar for the other programs) After doing this, Word appeared after reopening "Set Default Programs" - no reboot required
    Windows Registry Editor Version 5.00
    [HKEY_LOCAL_MACHINE\SOFTWARE\Clients\Word Processing\Microsoft Word\Capabilities]
    "ApplicationDescription"="Create and edit professional-looking documents such as letters, papers, reports, and booklets by using Microsoft Word."
    "ApplicationName"="Microsoft Word 2010"
    [HKEY_LOCAL_MACHINE\SOFTWARE\Clients\Word Processing\Microsoft Word\Capabilities\FileAssociations]
    ".doc"="Word.Document.8"
    ".dochtml"="wordhtmlfile"
    ".docm"="Word.DocumentMacroEnabled.12"
    ".docmhtml"="wordmhtmlfile"
    ".docx"="Word.Document.12"
    ".docxml"="wordxmlfile"
    ".dot"="Word.Template.8"
    ".dothtml"="wordhtmltemplate"
    ".dotm"="Word.TemplateMacroEnabled.12"
    ".dotx"="Word.Template.12"
    ".htm"="wordhtmlfile"
    ".html"="wordhtmlfile"
    ".odt"="Word.OpenDocumentText.12"
    ".rtf"="Word.RTF.8"
    ".wbk"="Word.Backup.8"
    ".wiz"="Word.Wizard.8"
    ".wll"="Word.Addin.8"
    By using my ramblings and the link provided above you may be able fix the problem you are having with Office 2007. However, I am unsure of how to find the necessary file associations for Office 2007 except by trawling through your registry for the filetypes
    listed in the link above and the values for them in HKEY_CLASSES_ROOT.

  • SJWS SP3 - Not including some jars from war file

    I have a problem when deploying my application using the new Java Web Server SP3 that when my application is deployed my weblogic.jar and j2ee.jar are not included in the classpath that is created.
    I have turned on finest detail logging and it does not say why these jar files are not being included in the path.
    They are in the war files lib dir just like all the other jars(about 14 of them).
    The only way I can get the app to run under SJWS is to add these other two files manualy to the classpath in the server.xml file.
    This app runs fine under JRun 4.0 with no issues.
    Why is this server dropping these jars and not even telling me it did it? What can I do to make it include these files in the proper classpath?
    Thx

    Here are the log entries.
    finer: WebappLoader[/vc]: WEB3107: Deploy WAR /WEB-INF/lib/weblogic.jar to
    C:\Sun\WebServer6.1\https-mis-lt-23974.corporate\webapps\XXXXXXX\WEB-INF\lib\weblogic.jar
    finer: WebappLoader[/vc]: WEB3107: Deploy JAR /WEB-INF/lib/j2ee.jar to
    C:\Sun\WebServer6.1\https-mis-lt-23974.corporate\webapps\XXXXXXX\WEB-INF\lib\j2ee.jarAs you can see it see's the two jar files from my WAR file.
    But when I try and run the app, have a look at the CLASSPATH it created. The two jar's are missing. WHY??????????????
    info: for host 127.0.0.1 trying to GET /vc/login/jsp/login_redirect.jsp, service
    -j2ee reports: WEB2798: [] ServletContext.log(): WEB4077: Classpath from the ser
    vlet context is:
    C:/Sun/WebServer6.1/https-mis-lt-23974.corporate/webapps/XXXXXXX/WEB-INF/lib/NetComponents.jar;
    C:/Sun/WebServer6.1/https-mis-lt-23974.corporate/webapps/XXXXXXX/WEB-INF/lib/aseclient.jar;
    C:/Sun/WebServer6.1/https-mis-lt-23974.corporate/webapps/XXXXXXX/WEB-INF/lib/client.jar;
    C:/Sun/WebServer6.1/https-mis-lt-23974.corporate/webapps/XXXXXXX/WEB-INF/lib/dbswing.jar;
    C:/Sun/WebServer6.1/https-mis-lt-23974.corporate/webapps/XXXXXXX/WEB-INF/lib/dx.jar;
    C:/Sun/WebServer6.1/https-mis-lt-23974.corporate/webapps/XXXXXXX/WEB-INF/lib/xxx-xxxxtags.jar;
    C:/Sun/WebServer6.1/https-mis-lt-23974.corporate/webapps/XXXXXXX/WEB-INF/lib/xxx-xxxxxtags.jar;
    C:/Sun/WebServer6.1/https-mis-lt-23974.corporate/webapps/XXXXXXX/WEB-INF/lib/internetbeans.jar;
    C:/Sun/WebServer6.1/https-mis-lt-23974.corporate/webapps/XXXXXXX/WEB-INF/lib/jbcl.jar;
    C:/Sun/WebServer6.1/https-mis-lt-23974.corporate/webapps/XXXXXXX/WEB-INF/lib/jcert.jar;
    C:/Sun/WebServer6.1/https-mis-lt-23974.corporate/webapps/XXXXXXX/WEB-INF/lib/jnet.jar;
    C:/Sun/WebServer6.1/https-mis-lt-23974.corporate/webapps/XXXXXXX/WEB-INF/lib/log4j.jar;
    C:/Sun/WebServer6.1/https-mis-lt-23974.corporate/webapps/XXXXXXX/WEB-INF/lib/regexp.jar;
    C:/Sun/WebServer6.1/https-mis-lt-23974.corporate/webapps/XXXXXXX/WEB-INF/lib/xerces.jar;
    /C:/Sun/WebServer6.1/bin/https/jar/webserv-rt.jar;/C:/j2sdk1.4.2_04/lib/tools.jar;
    /C:/Sun/WebServer6.1/bin/https/jar/webserv-ext.jar;
    /C:/Sun/WebServer6.1/bin/https/jar/webserv-jstl.jar;
    /C:/Sun/WebServer6.1/bin/https/jar/ktsearch.jar;
    /C:/app/XXXXXXX/;
    /C:/j2sdk1.4.2_04/jre/lib/ext/dnsns.jar;
    /C:/j2sdk1.4.2_04/jre/lib/ext/ldapsec.jar;
    /C:/j2sdk1.4.2_04/jre/lib/ext/localedata.jar;
    /C:/j2sdk1.4.2_04/jre/lib/ext/sunjce_provider.jar

  • How can i include Polymorphic VIs while building an executable?

    Hi,
    am trying include polymorphic Vis while building a stand alone application. It is giving me error. If i use instances of the polymorphic VI instead of using it as library, i am able to build application. is there any way to use the library directly in the process of building stand alone application. Am using LabVIEW 8.0
    Thanks
    Anil

    What are the errors that you are getting? Polymorphic VIs should have no problem in a built application - it would be a major issue if they did because NI makes extensive use of polymorphic VIs in their driver code.
    Mike...
    Certified Professional Instructor
    Certified LabVIEW Architect
    LabVIEW Champion
    "... after all, He's not a tame lion..."
    Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Maybe you are looking for