TestStand Datalog Use Step Format Setting Resets

I have something unusual happening on two different testers using PXI controllers. In TestStand 3.5, I use the Configure -> Datalog... to set the Numeric Precision to "Use Step Format". I check the box and hit the OK button. If I immediately go in to check the setting, the check box is unchecked. The datalog results do not output using the step format. It seems as if TS is in a state where it cannot store configurations.
Anybody have any suggestions on what to try here??
Thanks,
Ron

TestStand does not have this option by default. Is this part of a Custom Process Model you are using? You can check by switching to the default Sequential Model and seeing if this option still appears in the Configure Menu.
Allen P.
NI

Similar Messages

How to use currency format set

Hi All,
I have to use currency format set to mask the amount values to their respective currencies ,
i reviewed the Oracle XML Publisher Administration and Developer's Guide and followed all the steps mentioned there ,i m also quoting the same over here
To define a Currency Format Set:
1. Navigate to the Currencies page under the Administration tab. Select Create
Currency Format Set.
2. Enter a Name and a Code for the set. The Code is a unique identifier and cannot be
changed later. Select Apply.
3. The Currency Formats page will display for your newly created set.
To add currency formats to the Currency Format Set:
1. Select Add Currency Format to add a format to your set.
2. Select a Currency Name from the list.
Note: This list is generated from the FND currency table and
should include all ISO currencies. Additional currencies can be
added from the System Administrator responsibility.
3. Enter the Format Mask you wish to use for this currency and select Apply.
The Format Mask must be in the Oracle number format. The Oracle number format
uses the components "9", "0", "D", and "G" to compose the format, for example:
9G999D00 where
9 represents a displayed number only if present in data
G represents the group separator
D represents the decimal separator
0 represents an explicitly displayed number regardless of incoming data
See Using the Oracle Format Mask, Oracle XML Publisher Report Designer's Guide for
more information about these format mask components.
After a currency format has been created, you can update or delete it from the Currency
Formats page.
i followed all the above step ,i need to use germany currency ,i have also used the format-currency command in my RTF template,but still its not working ,i used 9G999D00 for masking .
Any hint would be very helpful ,thanks in advance .Please let me know if my question is not clear
Thanks
Pratap

hi all
Thanks ,this is resolved ,i just missed clearing cache ,after clearing the cache its working .
thanks
Pratap

I need to pass data from an Access database to Teststand by using the built in Data step types(open data

base /open SQL Statement etc) the first time i defined the system everything was fine but when i changed the Database (using M.S.Access) the " open SQL Statement" it would show the tables but not thier columns ,I"m using win98 sec edition / Teststand 1.0.1i need to pass data from an Access database to Teststand by using the built in Data step types(open database /open SQL Statement etc) the first time i defined the system everything was fine but when i changed the Database (using M.S.Access) the " open SQL Statement" it would show the tables but not thier columns ,I"m using win98 sec edition / Teststand 1.0.1
When I tried the same thing on another cmputer the same thing
happend
appreiciate u"r help

base /open SQL Statement etc) the first time i defined the system everything was fine but when i changed the Database (using M.S.Access) the " open SQL Statement" it would show the tables but not thier columns ,I"m using win98 sec edition / Teststand 1.0.1Hello Kitty -
Certainly it is unusual that you can still see the tables available in your MS Access database but cannot see the columns? I am assuming you are configuring an Open Statement step and are trying to use the ring-control to select columns from your table?
Can you tell me more about the changes you made to your file when you 'changed' it with MS Access? What version of Access are you using? What happens if you try and manually type in an 'Open Statement Dialog's SQL string such as...
"SELECT UUT_RESULT.TEST_SOCKET_INDEX, UUT_RESULT.UUT_STATUS, UUT_RESULT.START_DATE_TIME FROM UUT_RESULT"
Is it able to find the columns even if it can't display them? I am worried that maybe you are using a version of MS Access that is too new for the version of TestSt
and you are running. Has anything else changed aside from the file you are editing?
Regards,
-Elaine R.
National Instruments
http://www.ni.com/ask

My sister bought a 16GB iPod touch 5 and went thru all the steps to set up but then realized it didn't have a camera. So we clicked reset and erase all contents and settings. This does mean her credit card info is erased right?? Thanks for your help.

My sister bought a 16GB iPod touch 5 and went thru all the steps to set up but then realized it didn't have a camera. So we clicked reset and erase all contents and settings. This does mean her credit card info is erased right?? Thanks for your help.

Welcome to Apple Support Communities
When you erase an iPod touch, your information, apps and settings are deleted and iOS is back to factory settings. If she wanted an iPod touch with camera, she should return it after erasing it. Note that the iPod touch doesn't store her credit card information

How to set window title using cfdocument format="FlashPaper" ?

Does anyone know how to set the the browser window title when using:
<cfdocument format="FlashPaper">
#docContent#
</cfdocument>
The variable docContent is a fully formed html document, complete with <head> and <title> elements, yet <cfdocument> doesn't pick up the title I've specified. I'm wondering if anyone has done this before???
Thanks!

Yes, I tried that, but <cfdocument> replaces any content that I add. I cannot view the source for the page, but at least according to FireBug, when I view the page contents, I get:
<html>
<head>
<title>print.cfm - print.cfm (application/x-shockwave-flash Object)</title>
</head>
<body marginwidth="0" marginheight="0">
<embed width="100%" height="100%" type="plugin" src="http://127.0.0.1/tss/print.cfm?id=expeditions_staff&start=1" type="application/x-shockwave-flash">
</body>
</html>

Updating an iPOD using Windows format

I just tried to update both my step-daughter's & wife's iPODs and it tells me that they can't be updated because they both use windows format. They were first used on other computers, which are both Microsoft, so I'm assuming this is the reason its a windows format.
There is an option to reset the iPOD to its original setting, would this make them an apple or MAC format? If so, would all the info be lost. I'm asking this because I we want the updated software for the iPODs.
Thanks,
Tom

If you want to reformat the iPods for Mac you need to restore them on your Mac. Restoring will erase and reformat the iPod's hard drive, reload the software with the Mac version and put it back to default settings, so if you have songs on your iPod that aren't on iTunes you will lose them if you have no back up. Once the restore is complete follow the on screen instructions to name the iPod and automatically sync your songs and videos onto the fresh installation. Press Done and the iPod will appear in iTunes and start to sync. If you want to update manually or using selected playlists uncheck the box beside the sync automatically instruction and press Done, it will default to manual mode and you can choose whatever setting you like: Restoring iPod to factory settings with iTunes

How to make Address Book obey Preferences? I run MacBook Pro 4.1 laptop, Mac OS X 10.6.8 Address Book 5.0.3 (883) Preferences set at ... General First name following Last name Sort for Last name Address Format Canada Font size Large Phone format set a

How to make Address Book obey Preferences?
I run MacBook Pro 4.1 laptop, Mac OS X 10.6.8
Address Book 5.0.3 (883)
Preferences set at ...
General
First name following Last name
Sort for Last name
Address Format Canada
Font size Large
Phone format set at
+1.123.456.7890
When application quits - it's all forgotten and it self-resets to
unwanted configuration.

Whenever you remove system modifications, they must be removed completely, and the only way to do that is to use the uninstallation tool, if any, provided by the third-party developers, or to follow their instructions. If the software has been incompletely removed, you may have to re-download or even reinstall it in order to finish the job.
Here are some general guidelines. Suppose you want to remove something called “BrickYourMac.” First, consult the product's Help menu, if there is one, for instructions. Finding none there, look on the developer's website, say www.brickyourmac.com. (That may not be the actual name of the site; if necessary, search the Web for the product name.) If you don’t find anything on the website or in your search, email the developer. While you're waiting for a response, download BrickYourMac.dmg and open it. There may be an application in there such as “Uninstall BrickYourMac.” If not, open “BrickYourMac.pkg” and look for an Uninstall button.
If you can’t remove software in any other way, you’ll have to erase your boot volume and perform a clean reinstallation of OS X. Never install any third-party software unless you're sure you know how to uninstall it; otherwise you may create problems that are very hard to solve.
Trying to remove complex system modifications by hunting for files by name often will not work and may make the problem worse. The same goes for "utilities" that purport to remove software.

"Always Use Selected Format" check box in line items report

Hi Experts,
I have an issue in ECC 6.0.
From the transaction code FBL1N (Vendor Line Items) I am trying to export the report to spreadsheet by selecting the option List> Export>Spreadsheet then I have selected "Always Use Selected Format" check box. But if I execute the same report again I am not getting this option "Always Use Selected Format". Please let me how can we retrieve that option. Is there any possibility to get that option again either functionally or technically. I would like to know all the possible ways to get this option again.
Please do the needful.

Hello,
In one my thread Mr. Frank has replied as follows. I believe he has solved this.
Hope this may be really helpful.
The problem with the spreadsheet download is at one point, users have selected their default file type.
That said, SAPGUI is working as it should. (gui710)
Question though is how do we reset the values so they get the ?Select Spreadsheet Format? popup again.
The following steps should be performed :
- Call transaction SE38, enter program SALV_BS_ADMIN_MAINTAIN, and press F8.
- Follow the parameters below :
- Select ?DELETE? on the Actions Group
- Select ?DETAILED SELECTION? on the General Data :
- On Client - your number
- User : <user name>
-Hit EXECUTE.
-Press ENTER on the POPUP
- If there is an entry in the report that will need to be deleted. Also, make sure that the entry you will delete (for the user) has a value of GUI_ALV_XML_VER on field ?Parameter? .
- Select the line and hit the DELETE icon .
- Press ?Y? to continue delete. Press ENTER on the popup.
- Then EXIT all the way out of the program.
NOTE : When you run program SALV_BS_ADMIN_MAINTAIN, make sure they are out of any program that they are using for download.
Re: "Always Use Selected Format" check box in line items report
Regards,
Ravi
Edited by: Ravi Sankar Venna on May 15, 2009 2:31 PM

How to read and write data from Excel to TestStand without using LabVIEW VIs

Hi,
How can I read in columns of data from Excel into a TestStand array and write columns of data to Excel from TestStand without using LabVIEW VIs?
I don't think the Property Loader custom step type in TestStand will work because the data I would like to read in from Excel is in a column that is thousands of rows long and the data has to be in the proper format to use the Property Loader to load in an array from Excel.
Thanks for your help.

That example does not use LabVIEW and it does about 40% of what you need to do by calling Excel through ActiveX. If you don't know how to use Excel through ActiveX then you'll need to brush up on that.
http://www.microsoft.com/en-us/download/details.aspx?id=16250
http://support.microsoft.com/kb/141759
http://support.microsoft.com/kb/302084
CTA, CLA, MTFBWY

QA32 spreadsheet needs to unmark the button "always use selected format"

Hello Experts.
I am currently doing some testings in QA32, i want to transfer my list in printable documents, when i am in the menu LIST- EXPORT - SPREADSHEET , then the list for choices appears if(excel, all available formats)then there is this button box "always use selected format" which i have marked it and saves..then when after i proceed to QA32 again, i can't choose the format that i want in the selection.I believe it is the result of marking the button "always selected use format"
how can i unmarked the button "always selected use format" so i can have the chance to choose again?
Thanks

Exporting to Spreadsheets
Use
You can export the list as various spreadsheet formats. The following list summarizes the most important of these formats and the corresponding file name extension for the files:
Format
File Name Extension
Excel (in MHTML format)
MHTML
Excel (in MHTML format for 2000/97)
MHTML
Star Office (in ODS format 1.0)
ODS
Excel (in Office 2003 XML format)
MHTML
SAP-internal XML format
XML
SAP standard (internal table)
XML
Excel (in previous XXL format)
XLS
A format is only included in the selection options if it is available on your PC. The system administrator can also restrict the list of possible formats or even reduce the export to a certain format.
When you export the list in one of these formats, the system automatically generates a file with the name export and with the corresponding file name extension. Exactly which parts of the list are exported to the file depends on the format.
Exactly which data is exported to the file depends on the format:
●      In MHTML and XML formats, for example, you export the data that is displayed in the list on the screen. The number, selection, and sequence of columns as well as the sorting, filter, and calculation settings are all included in the export.
●      In Excel XXL format, any functions that you executed on the list are not included in the export. The file contains all the columns that you have displayed, but your sorting, filter, and calculation settings are ignored.
Prerequisites
To be able to display and, where necessary, further edit the file that you have generated with the export, the relevant program must be installed.
Procedure
Exporting the List
       1.      Choose with the quick info text Export and select Spreadsheet in the selection list. In full-screen mode, choose List ® Export ® Spreadsheet.
If you have a choice of more than one format, the Select Spreadsheet dialog box opens.
       2.      In the Select Spreadsheet dialog box, select the format in which you want to save the exported data.
       3.      Confirm the settings.
       4.      In the dialog box that appears, specify the path and name of the file and save the file.
For some formats, you also need to specify other settings for the file that is saved.
       5.      Make the required settings, where applicable.
If an installed program is linked to the selected file name extension, this program is started automatically and the generated file is opened.
Keeping Settings
If you plan to reuse the same spreadsheet format, you can save the settings for the format. By doing this, you can omit the step with the Select Spreadsheet dialog box and can export the list more quickly.
       1.      Proceed as described above in steps 1 and 2.
       2.      In the Select Spreadsheet dialog box, select Always Use Selected Format.
       3.      Confirm your settings and continue as outlined above.
From now on, whenever you export your list as described above, you bypass the Select Spreadsheet dialog box step and proceed immediately to saving the data.
4.      If you want to display the Select Spreadsheetdialog box again during the export, in the context menu for the list, choose Spreadsheet.
The dialog box opens; the Always Use Selected Format indicator is not set.

Message uses a character set that is not supported by the internet service

Does any one have any advice on how to fix this problem?
E-mails sent from my iphone 3G periodically arrive in an unreadable form at the recipient. The body of the e-mail has been replaced with the message "This message uses a character set that is not supported by the internet service...." The problem e-mails also include an attachment that contains an unformatted text file containing the original message surrounded by what appears to be lots of formatting data that is displayed as gibberish.
This occurs sometimes, but not always, even with the same recipients. I am sending e-mail through a G-mail account that is configured on the iphone using IMAP. I have tried the gmail account to use the two available formatting options for mail, but neither fixes the problem.
I have also upgraded to 2.01 and restored a few times without impact.

Hi,
I got somewhat similar problem with special charecters(German umlaud �,�,�..).
I create a file with java having special charecters in it. Now if I open this file I am able to view the special charecters in it.But If I attach this file send it using following code then receiver can not see the umlaud charecters in it.They get replaced by _ or ?
MimeBodyPart mbp2 = new MimeBodyPart();
FileDataSource fds = new FileDataSource(fileName);
mbp2.setDataHandler(new DataHandler(fds));
mbp2.setFileName(output.getName());
Multipart mp = new MimeMultipart();
mp.addBodyPart(mbp2);
msg.setContent(mp);
Transport.send(msg);
From you message it looks like you are able to send the mail attachment correctly(by preserving special charecters).
Can you tell me what might be wrong in my code.
I appriciate your efforts in advance.
Prasad

How do i use conditional formatting to edit the color of other selected other cells?

I have been playing around with the conditional formatting feature of Numbers, I have figured out how to change font and background color of the cell i am working with.
However what i am looking to do is apply a background color formatting to another cell (i.e. F2) if conditions are met in (B2).
the end game is this,
I want to make a column of check boxes, and using contional formating i want adject cells to change color (I.e. the example above: if (B2) is a check box, then when unchecked the reffered Cell (F2) does nothing, but when check the color of (F2) changes)
I can make this happen with Logic equations, the give (i.e. F2) some letter or number value, then using conditional formats i can have the color change. but this leaves that particular cell useless to me (i.e. F2) I am not free to enter or edit text in that cell. (i.e. =IF(B2=TRUE,"Paid","Due") ----> then add a conditional statement that chages color when the value is either "Paid" or "Due")
How do i have F2 change color, when B2 is checked and still retain the ability to enter information (or potential have another formula) in F2? (The Cell is not used up by "Paid" or "Due" it is editable just like any other cell)
is there anyway to change cell characteristics like font, color, and background color inside a formula, because in that way i would be able build it manually
i tried using the formula editor inside the conditional format pane, but the only infor it will allow me to retain is one partictular cell. i cannot add modifiers like "+" or "=" or anything else. what is that space used for then?
thanks for anyones help

MC,
You can do what you want in Numbers. It requires an auxiliary column and it's a bit tedious to set up because conditional formatting by comparison to another cell isn't relative, so each cell has to be programmed individually with no option to Paste or Fill to other cells in a range.
For explanation purposes, let's say your checkbox is A2, your cell to be conditionally formatted is B2, and your auxiliary cell is C2. To have the format of B2 determined by the checkbox status in A2, you will:
1. In C2 write: =IF(A, B, " ") The " " is any string or value that you don't expect to encounter in B normally, and using the space character means you don't have to worry about having it visible if C is in View.
2. In B2 use Conditional Format: "Equal To" cell C2 and set your text and fill attributes to be used when the box in A is checked.
That's it. Do that for every cell in the range.
Jerry

How to use open data set in SAP

Hi SAP Gurus,
        Could anyone help, how to use open data set in SAP.
      I need to upload a file from Application server (ZSAPUSAGEDATA) to internal table (IT_FINAL).
Thanks & Regards,
Krishnau2026

Hi Krishna.
These are the steps you need to follow.
tables: specify the table.
data: begin of fs_...
        end of fs_    " Structure Field string.
data: t_table like
        standard table
                  of fs_...
data:
w_file TYPE string.
data:
fname(10) VALUE '.\xyz.TXT'.
select-options: if any.
PARAMETERS:
p_file LIKE rlgrap-filename.
w_file = p_file.
select .... statement
OPEN DATASET fname FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
*OPEN DATASET fname FOR OUTPUT IN BINARY MODE.
LOOP AT t_... INTO fs_....
write:/ .....
TRANSFER fs_... TO fname.
or
TRANSFER t_... TO fname
ENDLOOP.
CLOSE DATASET fname.
Reward points wisely and if you are benefitted or ask for more detailed explanation if problem not solved.
Regards Harsh.

I no longer have access to the back up email address I used when I set up my apple ID. I have since forgotten the answers to my security questions and am having a problem making changes to my account. What can I do?

I no longer have access to the back up email address I used when I set up my apple ID. I have since forgotten the answers to my security questions and am having a problem making changes to my account. What can I do?

You need to ask Apple to reset your security questions. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to call, fill out and submit this form.
They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
(114957)

HT204053 I have an Apple ID, but when I try to sign in for icloud, from the control panel, it says that I have an Apple ID but I don't have one for icloud. I can't seem to find where I set up the account, even though I've gone thru the steps to "set up" i

I have an Apple ID that I use for itunes. I am trying to set up my icloud account. I have gone thru the steps to "set up" the icloud account. It only has me download the icloud control panel, then I'm supposed to sign into icloud, but then it tells me that I don't have an icloud account. I have looked all over the support area and it doesn't tell me how to get passed this problem. Any suggestions?

http://www.youtube.com/watch?v=gmOmd_WFp6o
This was helpful for getting icloud set up from my pc...but someone said that they had it on their pc and then it disappeared. Fun! Fun! Fun!

TestStand Datalog Use Step Format Setting Resets

Similar Messages

Maybe you are looking for