TestStand not updating th description after using the edit substep

I've created numerous custom steps in TestStand. None of them will update the description after I use the edit substep and change some of that steps properties. As an example, I have the following step description...
str(Step.Channel.DeviceName)
After I use the edit substep, which changes step.Channel.DeviceName, the description does not update. However, if I then open the properties menu for that item and either select "OK" of "Cancel" to leave the property window, it then updates to the correct values. Placing down a new step will also force the description to update. While this is not functionally causing any problems, it would be nice if the descriptions updated immediatly.

Hey Dillon,
The reason it doesn't update is because the sequence editor doesn't know that the sequencefile has changed so it doesn't know to redraw that window. You can force it to redraw the window by calling the method IncChangeCount from the PropertyObjectFileClass. If you increment the change count it should automatically update the description as soon as your edit substep completes. Also a piece of advice, in the future if you have TestStand questions, you can probably get a quicker answer to them by posting on the TestStand forums, even if it is using the TestStand API in another programming environment like LabVIEW or CVI. Hope this helps!
Message Edited by Patrick P. on 12-06-2006 06:38 PM
Pat P.
Software Engineer
National Instruments

Similar Messages

HT4060 charging not supported by this accessory after using the same device for a year

I own a first gen iPad. I have always used the same wall charger to charge it for the past 17 months. Suddenly I get this message that charging is not supported by this device. So I plug it into my iMac to charge.....same message. This is a software problem. I find that thousands of owners or iPads and other ios devices are all suddenly having the same issue. Apple has to offer a update to fix this. It is not a cable or connector or hardware issue. The only way I can now charge my iPad is to do a reset. Then it will charge for a few days normally until this message comes back. APPLE PLEASE ACKNOWLEDGE THIS PROBLEM AND ISSUE AN UPDATE TO FIX IT NOW.

This is an iPad user to user forum. Apple does not read posts.
Suggest you update to the current iOS version 5.1.1.
Look at Apple feedback.
http://www.apple.com/feedback/ipad.html
 Cheers, Tom

Actionscript 3 Class Not Running More Than Once After Using The GoToAndStop function

I'm having a strange issue, and I am sure it's due to my lack of knowledge about how classes fully work in Adobe AIR (Flash CC). I've created a login button that is connected to a function, and based on a set of conditions it will take you to a different frame with the GoToAndStop function. I've created a logout button that is suppose to take you "back" to the login frame (that has the login button) if you click the logout button using the GoToAndStop function. Up to this point, everything works until I try to click the Login button again, it does not do anything. It's like it does not even try to execute my class file anymore.
Does the class file only run at startup and never runs again, and if so, how can I create a section of code that is constantly monitoring what the user is doing no matter what frame you are on and no matter if I use the GoToAndStop function or not?
Thanks

Based on your qyestion, I think I was wrong with my second guess.
When I want to create a button, what I do is draw a bitmap that looks like a button and then use a mouse event listener that looks for any part of the stage that is clicked. You would use the same code for touch as well. As3 will return the x.y. coordinate of the area that was clicked or touched. When the xy coordinate is known, if it corrseponds to the area where the button is, I code the appropriate response. Hence, I only use one event listener for all my buttons, as long as thet involve simple clicks or taps of the screen.
Good luck, Justin

In LR6CC, after using the merge to HDR and the photo returns to LR as a DRG, it is not automatically put into a previously set up stack. For example a stack of three photos. If I use NIK HDR and the photo returns to LR, the stack is automatically changed

In LR6CC, after using the merge to HDR and the photo returns to LR as a DRG, it is not automatically put into a previously set up stack. For example a stack of three photos. If I use NIK HDR and the photo returns to LR, the stack is automatically changed from 3 to 4. When LR's HDR merge brings a photo back into LR's library, the stack number does not change and the DRG version isn't included in the stack.

Hi,
The Ps CS6 public beta version contains the same camera support as found in Ps CS5/5.5 compatible CR 6.6. There will be future updates to CR 7 for Ps CS6 to pick up more camera support. The Nikon D800 NEF files are not supported, yet.
If you like to work with your D800 files in the public beta build now, you'll have to get the DNG Converter 6.7 from here: http://labs.adobe.com/technologies/cameraraw6-7/
and convert your files to DNG.
regards,
steve

Folio producer not updating folios on app after publishing folios

Folio producer not updating folios on app after publishing folios, before May updates it used to update my folios right away, it's been 2 days and my folios has not been published or updated. please help

yes I did, i even unpublished the folios adn then published them again, i made them public when publishing and it still doesn't make the updates on the app, on the folio producer it shows the latest files and that the updates request was sucessfull. But istill no updtes on app,
please help

Pages is not saving document correctly. After saving the changes either do not appear or you can not open the file. The error is "not a valid format" I am in Pages '09 4.1 (923). I also use Parallels. Anyone having similar issues?

Pages is not saving document correctly. After saving the changes either do not appear or you can not open the file. The error is "not a valid format" I am in Pages '09 4.1 (923). I also use Parallels. Anyone having similar issues?

I'm not sure that Lion AutoSave feature apply to network servers.
I'm just sure that the Versions feature doesn't.
Yvan KOENIG (VALLAURIS, France) samedi 21 janvier 2012
iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My Box account is : http://www.box.com/s/00qnssoyeq2xvc22ra4k
My iDisk is : http://public.me.com/koenigyvan

I connected my iphone 3g to itunes which was in 4.1 firmware and itunes ask for an update which i downloaded an updated the phone to version 6.1.3 but my phone cannot start it shows no service my sim card is not getting network and i cannot use the phone.

i connected my iphone 3g to itunes which was in 4.1 firmware and itunes ask for an update which i downloaded an updated the phone to version 6.1.3 but my phone cannot start it shows no service my sim card is not getting network and i cannot use the phone. what should i do.?

First, you do not have a 3G if you could upgrade it to 6.1.3, because 4.2.1 is the last version that will work on the 3G. So you either have a 3GS or you somehow hacked the phone to install an incompatible version. You can check the model you have by entering your serial number here: https://selfsolve.apple.com/agreementWarrantyDynamic.do
Assuming you have a 3GS the most likely reason for your problem is you have a gray market phone that was hacked or jailbroken to unlock it. When you upgraded it you removed the hack, so the phone is now locked to its original carrier.

Load status in PSA "Request not updated to any data target using delta"

Hi,
I need to delete the Unwanted request from PSA with status u201CRequest not updated to any data target using deltau201D
There are lot of requests are there in PSA but some of them loaded with status
u201CRequest updated in Data targetu201D u2013 I donu2019t want delete this requests.
Others u201CRequest not updated to any data target using deltau201D -- need to delete
We are deleting manually every week end.
Is there any program or tables which can delete automatically unwanted u201C Request not updated to any data target using deltau201D requests from PSA.
Thanks for your help in Advance,
Raj.

Hi Rajesh,
You may create a simple process chain, where you could include the variant "Delete PSA Request".At the bottom of this variant maintenace screen you would find options exactly matching your requirements.It's a very simple option and should not take you more than 5 minutes.
Best Regards,
Bansi.

Master data loads Request not updated to any data target using delta

When checking the PSA the request updated ICON has red triangle and the mouse over says
"Request not updated to any data target using delta".
I am doing full loads for text data and both full and delta's loads for Attributes. This is BI 7.0 system but the loads are still from 3.1. DTP has not been implemented yet. The system was just upgraded in July. I am unable to schedule deletes from the PSA for successful loads. However, I think the data is updating to the info objects. My Info package has the selection to PSA then in the InfoObject package by package.
How do I schedule the deletes from PSA and why does the Request updated show red but the monitor for the info package show green?
Edited by: Joe Mallorey on Jan 27, 2009 5:46 PM

Hi shikha,
The load has not failed but I am unable to delete the load from the PSA.
If you do a manage on the Data Source or go to PSA from RSA1 the first column has the green gear icon instead of a green check mark I have red triangle the mouse over says "request not updated to any data target using delta" The data has loaded to info object. I am trying to schedule deletes from the PSA and using the option to "delete only successfully booked/updated requests" So how do I get the request updated column to show a green check mark so my deletes will Process? This is for master data only. My transactions load fine and delete properly according to my settings.
Thanks for the reply.
Regards,
JoeM

Request not updated to any data target using delta

I am on BI 70 using 70 DataSource. I executed InfoPackage in full update, then ran DTP in full mode. There is only 1 data target. The requests were successfully updated in the target DSO. However, when I checked the datasource PSA, the requests were showing u201CRequest not updated to any data target using deltau201D with red triangle.
My questions are:
1. Is this normal?
2. I need to do more full loads. When I run DTP (in full mode) again, will it re-load those PSA requests (the ones already in DSO) to the same data target?
Thank you.
Rebecca

Hi Rebecca,
To answer your questions
1. Yes. This is normal.
2. Yes. When you run DTP in Full Mode again, this PSA request (along with any other subsequent loads you might have done to PSA) would be re-loaded to the same data target .
If this is not required you can set the DTP to delta mode. This ensures that the PSA request is updated to data target only once.
Hope this helps!
- Meera

PSA showing Request not updated to any data target using delta

Hi BWers,
I am very new to SAP and have a IDES installed with BW. I am trying to do a simple data load from a flat file. I have managed to create a InfoPackage, but when I schedule it and then go into the data source -> manage and look at the screen :
Requests for PSA /BIC/Bxxxx
I see the Request updated having a Red triangle with an exclamation mark in it and it says
"Request not updated to any data target using delta"
Wondering if someone can help me resolve this so that I can further create a DTP and load the data into the InfoObject.
Thanks for all your help.
Manish

Reg : Delta Load : Production Data
Current Scenario :
we have existing system pulling data from 0CO_OM_WBS_6 ,ZPS_0CO_OM_NWA_2
Structure underlying infocube:
2 Data Sources >> 1DSO >>1 Infocube .
Usually the Data is loaded in delta format on daily basis using process chains.
For last one month the delta is not picking properly :
Example :
A WBS Element is created 2 years back and it open and getting its update into BW ,
latest amount or cost incurred for the WBS Element is not picked for certain WBS only :
I have Tried Giving a Full Infopack load to the DSO , but as DataStructure was migrated from 3.5 to 7 landscape :
its showing this error:
Request not updated to any data target using delta,
i went and created DTP which didnt help much Because latest isnt caputered .
if i goto RSA1old and find the full req and trigger it ,it says inti overlapping ,
how to over come this as this is a production issue
Obaid : pls help me on this issue , any others expert pls help

TS2529 what do i do when am unable to activate my iphone after using the itunes to update?

what do i do when am unable to activate my iphone after using the itunes to update?

I had something similar (wouldn't connect to my router). I just reset the router, and it went like a dream from there. Myabe your problem too? Good luck.

Bookmarks are saved yet after using the page icon is still displayed instead of the actual icon for the website. I have followed the directions for "Favicons do not display".

My bookmarks, on a HP Pavilion dv-7-2273cl notebook, are saved yet the page icon is still displayed after using the bookmark instead of the actual icon for the website. I have followed the directions for "Favicons do not display" without any success. This problem is not experienced on my much older Gateway desktop.

A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
*https://support.mozilla.org/kb/Bookmarks+not+saved#w_places-database-file

TS3274 After using the headphones I get voice on headphones but not without them. Any ideas. Was some setting set by mistake?

After using the headphones I get voice on headphones but not without them. Any ideas. Was some setting set by mistake?

Eb246 wrote:
Even the volume slider shows only with headphones in.
That is exactly what I was trying to determine!
I don't think that this will work but try this first.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
Restoring the device may be what you will have to do, but two more things that you can try first are to restore from a backup if you have one....
How to backup and restore from a backup
http://support.apple.com/kb/HT1766
If that doesn't work ....
You can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered.
If none of these things work , you should probably restore the iOS software, but backup your iPad first per the instructions and restore from the backup at the end of the process.
http://support.apple.com/kb/ht1414

HT204266 The APP update request came for 4 apps. I submitted update all, but the system is stuck and will not update. Further, I cannot use those apps. How do I fix this?

The APP update request came for 4 apps. I submitted update all, but the system is stuck and will not update. Further, I cannot use those apps. How do I fix this?

Two other things to try -
Power your iPad off for a minute and then back on again.
Double tap the Home button, locate the updating apps (one by one) in the bottom task bar, press on it until the red minus sign comes up and click it. Repeat for the remaining apps. Try the updates again but do them one by one rather than Update All.

TestStand not updating th descriptio​n after using the edit substep

Similar Messages

Maybe you are looking for

TestStand not updating th description after using the edit substep