TestStand v3.0 for multiple test sequence runs

I am trying to setup the TestStandv3.0 so that it can execute multiple
test sequences. Currently it executes one sequence and then rather
than reporting the test results in an HTML format, it terminates and
the entire tool quits execution. How do I fix this? I did not get
this problem with TestStand v1.0.1 of of the box.

Hi,
It maybe that in the Station Options under the Execution Tab, for the
On Run-Time Error control.
Make sure the 'Immediately Goto Cleanup on Sequence Failure' is not
checked.
Regards
Ray Farmer

Similar Messages

  • We are no longer able to use the audio portion for ELPA testing after running apple software updates on snow leopard?

    We are in the middle of OAKS TESTING.  We had to run the latest Java Updates inorder to do the ELPA portion of our State "OAKS" testing.  Since last Friday we cannot consistantly or basically cannot get the audio portion to work.  The sound and speech works fine in system preference but no longer for the testing.  It was fine last week.
    Is there other school district having this issue in the state of Oregon?

    When I try to do a "save as" in preview, pages, numbers, etc., there no longer is a save as in the pull down menu. If a go to help and type save as it will pop up under help - what a pain.
    Save as is available in Mountain Lion by hitting the Option key while you access the File menu. (It was returned after being eliminated in Lion).
    My system is running slow!
    How much RAM do you have installed? Mountain Lion is somewhat of a memory hog. And, how much free/empty hard drive space do you have?
    And what is Mavericks? Is that going to change everything?
    Apple announced a new OS a few days ago; it is supposed to be released in the fall.
    When i open softwares, like quickbooks, it tells me that my QB wants to import my contacts.
    The capability to sync is a new feature. You don't need to do it. I did not allow any app to import my contacts. You can also turn off other features if you do not like them - simply go through all the System Preference Panes and decide what you want and what you don't want.

  • Teststand property loader for multiple sequences

    Hi, I am using Teststand 3, and would like to be able to Export all sequences into one Excel spreadsheet, so that each tab references a single sequence. If anybody has already done this, or has a suggestion as to how to do it, I would be grateful. The end goal is to create a single excel file, that can be emailed around, without people losing track of all the different excel sequence files.

    ADL,
    Unfortunately, there is no way to do this with the property loader features of TestStand. The Import/Export Property tool does not distinguish between worksheets in a workbook and the Property Loader step type can only import properties. If you really need this functionality, one possibility is to use the ActiveX methods exposed by Excel to populate an Excel workbook.
    Regards,
    Matt P.
    Applications Engineer
    National Instruments

  • Creating cache for multiple property files run time/dynamically.

    Hi,
    I have a requirement, where in I need to create cache for each property file present in a folder at server side or in the lib or resources directory. Please help me how I can do this?
    Thanks.

    ok thank you.
    I follwed this method implementation:
    static HashMap<String, HashMap<Object, String>> cacheHolder = new HashMap<String, HashMap<Object, String>>();
         static HashMap<Object, String>[] cache = new HashMap[2];
         static Integer fileCount = 0;
         static int incrementSize = 2;
    public method1(Map<Object,String>map){
    File file = new File((new StringBuilder(
                             "ABC/XYZ/")).append(value)
                             .toString()); // where value is the file name returned from the external method
                   int newSize = existingMapLength+incrementSize;
                   if (someVal== null) {                    
                        synchronized (fileCount) {
                             int oldSize = cache.length;
                             if(fileCount==cache.length){
                                  HashMap[] oldData = new HashMap[oldSize];
                                  oldData = cache;                              
                                  cache = new HashMap[newSize];
                                  LOGGER.info("New Size added:==>"+cache.length);
                                  for(int i=0;i<oldSize;i++){                                   
                                       cache[i] = oldData;
                                  cache[fileCount] = readExternalPropertiesFile(file); // external method which returns the properties of the file in hashmap
                                  cacheHolder.put(value, cache[fileCount]);                    
                                  keys = cache[fileCount].keySet();
                             else{                         
                             cache[fileCount] = readPropertiesFile(file);
                             cacheHolder.put(value, cache[fileCount]);                    
                             keys = cache[fileCount].keySet();
                             someVal= cache[fileCount];
    fileCount = fileCount + 1;
    Please let me know if any improvemnets are possible.

  • MRP Run for Multiple plants

    Hi Guys:
    IN SAP R/3
    My client has requirement to merge planning of material for multiple plants and run the MRP under one head plant.
    For example:
    Plant : 1000, 1001, 1002, where plant 1000 is a head plant who had authorization to perform MRP run.
    if I run MRP Sepeartely:Each plant has below requirement for one material number (M1)
    Plant 1000 : 3 EA
    Plant 1001 : 2 EA
    Plant 1002 : 5 EA
    Instead of running MRP per plant, my client needs to run MRP for multiple Plants  that Consolidate  total requirement for all plants.
    and generate PR--->PO , In the PO, M1 should be delivered to 3 different plant locations by vendor and Po Will be issued from Head Plant 1000?
    Is there any Report in SAP , Where MRP Controller can See Requirements from Different Plants @ Central Purchasing  level after one Multi Plant MRP run, So that he can decide on how much to allocate to each plant?
    Thanks for help
    Thanks
    Sweth

    Hi,
    If u want to perform the MRP in one plant for all the plant requirement is depends on the bussiness process.
    You can try the following scenario:
       Planning in one plant nd production in other plant - Respective master data and special procurement have to maintain.For 
    further clarity please follow the below link
    http://help.sap.com/saphelp_46c/helpdata/en/f4/7d3f9344af11d182b40000e829fbfe/frameset.htm.
    We can evaluate the PR and PO by providing the authorisation object for the multiple plant to the respective users.
    Revert me back in case of clarification.
    Thanks
    P.Srinivasan

  • I am writting a test  using a sequencer to test for multiple button click

    I'm using flex sdk 4.1 and have a situation where a  button click is sometimes called twice. I am writting a test for this using a sequencer and it will run for at least one button click, what I am not sure is how to test for multiple click events(which shouldn't happen, but occours randomly in my project)
    package tests.view
        import flash.events.MouseEvent;
        import flexunit.framework.Assert;
        import mx.events.FlexEvent;
        import org.flexunit.async.Async;
        import org.fluint.sequence.SequenceEventDispatcher;
        import org.fluint.sequence.SequenceRunner;
        import org.fluint.sequence.SequenceWaiter;
        import org.fluint.uiImpersonation.UIImpersonator;
        import views.AddComments;
        public class TestAddComments
            private var view:AddComments;
            [Before(async,ui)]
            public function setUp() : void
                view = new AddComments;
                Async.proceedOnEvent( this, view, FlexEvent.CREATION_COMPLETE, 600 );
                UIImpersonator.addChild( view );
            [Test]
            public function testButtonClick():void
                view.addCommentBtn
                var sequence:SequenceRunner = new SequenceRunner( this );
                sequence.addStep( new SequenceEventDispatcher( view.addCommentBtn, new MouseEvent( 'click', true, false ) ) );
                sequence.addStep( new SequenceWaiter( view.addCommentBtn, MouseEvent.CLICK, 100 ) );
                sequence.run();

    The only way you could test for that type of circumstance... one where something may happen... is to do so with a timeout. In other words, you cannot let the test pass simply because the first event occurred.
    Two ways to handle this... with sequences:
    Instead, you write a test that expects 2 clicks. In the assertion handler (which would only be reached if both clicks occur) you would fail the test:
    fail('i shouldnt be here');
    In the Waiter for the 2nd click, you would specify a timeout handler. That timeout handler will get called in the 2nd click does not occur in the specified time... (finding that time is the hard part). The default timeout handler fails the test, however, in your case, your timeout handler would just happily do any assertions needed and move on. A timeout does not necessarily mean failure... in your case, it is correct
    Second choice:
    You could create a timer. Create an event handler for the button click which increments a counter. Start the timer, do your test. However, have your test pending on the timer's completion rather than something like the click.. In that case, you would then be able to just check the count:
    private var clickCount:int = 0;
    [Test]
    public function testButtonClick():void {
         var timer:Timer = new Timer( 100, 1 );
        Async.handleEvent( this, timer, TimerEvent.COMPLETE, checkClickCount );
         view.addCommentBtn.addEventListener( 'click', function( e:Event ):void { clickCount++ } );
         view.addCommentBtn.dispatchEvent( new MouseEvent( 'click;, true, false ) );
    private function checkClickCount( e:Event ):void {
    assertEquals( 1, clickCount );
    However, I can't imagine how the test you are describing could ever yield more than one click event... I am guessing the problem is elsewhere, but this will help you verify
    Mike

  • How to run multiple CodedUI Ordered Tests over multiple Test Agents for parallel execution using Test Controller

    we are using VS 2013, I need to run multiple Coded UI Ordered Tests in parallel on different agents.
    My requirement :
    Example:   I have 40 Coded UI Test scripts in single solution/project. i want to run in different OS environments(example 5 OS ).  I have created 5 Ordered tests with the same 40 test cases. 
    I have one Controller machine and 5 test agent machines. Now I want my tests to be distributed in a way that every agent gets 1 Ordered test to execute. 
    Machine_C = Controller (Controls Machine_1,2,3,4,5)
    Machine_1 = Test Agent 1 (Should execute Ordered Test 1 (ex: OS - WIN 7) )
    Machine_2 = Test Agent 2 (Should execute Ordered Test 2 (ex:
    OS - WIN 8) )
    Machine_3 = Test Agent 3 (Should execute Ordered Test 3
    (ex: OS - WIN 2008 server)  )
    Machine_4 = Test Agent 4 (Should execute Ordered Test 4 (ex:
    OS - WIN 2012 server) )
    Machine_5 = Test Agent 5 (Should execute Ordered Test 5 (ex:
    OS - WIN 2003 server) )
    I have changed the  “MinimumTestsPerAgent” app setting value
    as '1' in controller’s configuration file (QTController.exe.config).
    When I run the Ordered tests from the test explorer all Test agent running with each Ordered test and showing the status as running. but with in the 5 Test Agents only 2 Agents executing the test cases remaining all 3 agents not executing the test cases but
    status showing as 'running' still for long time (exp: More then 3 hr) after that all so  its not responding. 
    I need to know how I can configure my controller or how I can tell it to execute these tests in parallel on different test agents. This will help me reducing the script execution time. 
     I am not sure what steps I am missing. 
    It will be of great help if someone can guide me how this can be achieved.
    -- > One more thing Can I Run one Coded UI Ordered Test on One Specific Test Agent?
    ex: Need to run ordered Test 1 in Win 7 OS (Test Agent 1) only.
    Thanks in Advance.

    Hi Divakar,
    Thank you for posting in MSDN forum.
    As far as I know, we cannot specify coded UI ordered test run on specific test agent. And it is mainly that test controller determine which coded UI ordered test assign to which test agent.
    Generally, I know that if we want to run multiple CodedUI Ordered Tests over multiple Test Agents for parallel execution using Test Controller.
    We will need to change the MinimumTestsPerAgent property to 1 in the test controller configuration file (QTControllerConfig.exe.config) as you said.
    And then we will need to change the bucketSize number of tests/number of machines in the test settings.
    For more information about how to set this bucketSize value, please refer the following blog.
    http://blogs.msdn.com/b/aseemb/archive/2010/08/11/how-to-run-automated-tests-on-different-machines-in-parallel.aspx
    You can refer this Jack's suggestion to run your coded UI ordered test in lab Environment or load test.
    https://social.msdn.microsoft.com/Forums/vstudio/en-US/661e73da-5a08-4c9b-8e5a-fc08c5962783/run-different-codedui-tests-simultaneously-on-different-test-agents-from-a-single-test-controller?forum=vstest
    Best Regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • How can I handle deploying multiple test systems on the same PC that have been developed using different versions of LabVIEW, TestStand, and/or Switch Executive?

    The major issue here is that the test systems must be documented and validated before being released to the production floor. Given this if a test station has multiple test systems deployed on it that have been developed on various versions of LV, TS, and Switch exec how can I force the test system selected to use the correct versions of TS, LV, and Switch exec.? I understand that the solution would be to recomplie everything and bring them up to the latest version but that would then require re-validation according to the QA department. Any advice would be greatly appreciated.
    It would be nice if theTS deployment was more like an LV executable... meaning when a LV executable is launched it always knows what LV runtime engine to use when there are multiple engines installed on a PC.

    Hi,
    Multiply versions of teststand can reside on the same system, but only one version can run at a time. They is a utility that has to be run to set the active version.
    The SequenceFiles have a version number, and you will find an error will be generate if you try to Load the sequencefile in the wrong version of TestStand.
    The labview VIs will only work providing the correct version of the RTE is also installed on your system, even a labview executabe requires the correct RTE to be installed, either as part of the executable installation or as a seperate installation, before the labview exe will work correctly.
    I'm not fimilar with the Switch exec but I would expect that it will also require the correct lower level device drivers to be available for the version you are using.
    Therefore, as you are indicating that some of your system are at  a older version, its difficult to image how you could achive this, considering if you say you have different versions of the software(s). For a start, you may have the problem that newer code/ sequencefiles using additional functionatily not available in the older versions.
    I would think your only solution would  be to have different deployments covering the different versions you have, or at least bring all your test systems up to the same version of teststand.
    Regards
    Ray Farmer
    Regards
    Ray Farmer

  • Export Limits for Multiple Sequences in the Same Sequence File for TS3.0

    Hi,
    I am using TestStand 3.0 to a test application. Because we want to have our limits in a csv-file I have tried to use the Import/Export tools in TS. But this application only supports to export limits for the selected sequence (e.g. main, or subseq1) at a time. This makes it a pretty hard job to export limits from 30 test sequences. What I need is a possibility to export my limits from �all sequences� in my seq-file.
    I have found an article on NI Dev. Zone about �Export Limits for Multiple Sequences in the Same Sequence File (TestStand 1.0.x)�.
    http://sine.ni.com/apps/we/niepd_web_display.DISPLAY_EPD4?p_guid=B45EACE3D9CB56A4E034080020E74861&p_node=DZ52236&p_submitted=N&p_rank=&p_answer=&p_sourc
    e=External
    I have tried to use this code but because it�s for TS 1.0.2 the limits from my multi num test step and my custom steptypes isn�t exported. So that doesn�t fulfill my needs.
    Is there an updated version with �all sequences� added to TS 3.0? Is there other good solutions to my problem out there?
    Best Regards,
    Morten Pedersen
    CIM Industrial Systems A/S
    Denmark

    Hi David Mc,
    Thanks for your reply. I have already considered this solution because the source code is added in the folder described in your reply. But that is not a good solution. It will cost me a lot of time to establish the toolchain, reverse engineer the source code, make the implementations and build a new dll (most off these is already knowledge by NI). And when NI make future releases of TestStand I have some merge work to do every time NI have made some changes in the files I have changed.
    But as I write above: I have hoped that NI already has/or could made a solution like the one to 1.0.2 (see link in root) to me. And then they could include it in the next version.
    I don't think I am the only one in the TestStand world that ne
    ed this feature.
    Best regards,
    Morten Pedersen
    CIM Industrial Systems A/S
    Denmark

  • Measurement for multiple numeric limit test

    Hello,
            I am developing a test software using LabWindows and TestStand. In my application, I have added a no: of multinumeric tests. In Operator Interface, I want to display each measurement in run time, instead of waiting for completion of all the measurements with Multiple numeric limit test. Is there any way to receive in TSOP each runtime measurent taken for multiple numeric limit test without waiting for multinumeric limit test over?
    Thanks in advance......
    Best Regards,
    Vijay

    Hi Vijay,
    Unfortunately, a Multiple Numeric Limit Test will not allow you to return each measurement inside the step as it executes.  If you need this to occur, there are other methods that you could take.  You could create a custom step type or use many Numeric Limit Test steps and pass them the indexes in your array.
    Another method you might use would be to use an Action step and save the array locally.  Then, you could use Statement steps to evaluate each item in the array.
    Jessica
    National Instruments
    Product Support Engineer

  • How do you have a single test case run on multiple platforms in both a Deploy/Test build and via MTM?

    I am wanting to have a scheduled nightly build execute my testcases for multiple platforms/configurations.  I have multiple VMs running in these environments but the method Microsoft provided
    (without digging into customizing the build template) doesn't provide any functionality for this.  This is a basic use case for automation that I can't believe they would miss.  Has anyone run into this and found a solution.  Is it just that
    you have to completely customize the template?
    For a more complete use case...
    I have 4 customers that have different configurations and different OS platforms on top of a generic configuration.  I want the build/deploy/test build to automatically run my 152 test
    cases to at minimum those 5 environments.  I want this to run every morning at 1am and the tests should in the different environments in parallel (ie all of customer 1 tests run at the same time as customer 2 tests...). I also don't want to have to create
    152 * 5 test cases since that will bloat things and cause more management/maintenance headaches.

    I am wanting to have a scheduled nightly build execute my testcases for multiple platforms/configurations.  I have multiple VMs running in these environments but the method Microsoft provided
    (without digging into customizing the build template) doesn't provide any functionality for this.  This is a basic use case for automation that I can't believe they would miss.  Has anyone run into this and found a solution.  Is it just that
    you have to completely customize the template?
    For a more complete use case...
    I have 4 customers that have different configurations and different OS platforms on top of a generic configuration.  I want the build/deploy/test build to automatically run my 152 test
    cases to at minimum those 5 environments.  I want this to run every morning at 1am and the tests should in the different environments in parallel (ie all of customer 1 tests run at the same time as customer 2 tests...). I also don't want to have to create
    152 * 5 test cases since that will bloat things and cause more management/maintenance headaches.

  • SESSION VARIABLES : HOW TO TEST FOR MULTIPLE USERS

    I have a username session variable set up on a localhost testing envirnoment.
    This works fine for one user, but when I open another occurence of the browser (or just another tab) to test for multiple users the system overwrites the session variable with the last username input.
    So the question is:
             Why doesn't dreamweaver hold an instance of the session variable for each browser session? and if not what are your suggestions?
    Thanks
    Adam.

    Thanks for that.
    After scouring the internet I found the only way of running 2 instances of firefox  without them sharing the session variables is to create 2 new firefox profiles in windows + set the MOZ_NO_REMOTE environment variable.
    Internet explorer is much easier as it has a 'new session' option in the file menu, but seems to have more trouble displaying tables correctly.
    Hope this helps anyone with a similar problem.

  • I am looking to use multithreading in order to run multiple tests in parallel on one UUT.

    I am looking to multithread multiple tests in paralllel on one UUT.  I looked in the main site and all examples are on zip files that I seem to not be able to successfully download from the site.  Does anyone have any file examples or white papers on this subject that I can view???
    Solved!
    Go to Solution.

    put one test in a sub sequence.  then call that subsequence using New Thread as the Execution Options:
    jigg
    CTA, CLA
    teststandhelp.com
    ~Will work for kudos and/or BBQ~

  • How to execute a MTS (Master Test Script) in SAP ECATT Test Configuration for multiple variants.

    I have a MTS (Master Test Script) which references 4 Test Scripts. As of now, I am able to run this MTS directly by opening it as a Test Script and running it for default test data.
    Now, I want to run this MTS in SAP ECATT Test Configuration for multiple variants/test data. I am not able to see any parameter if I enter MTS in the Test Configuration.
    Below thread is similar to my requirement but I am not able to understand the solution properly.
    eCATT - how to run multiple test scripts with input variables in different test scripts?
    Any help in this case would be highly appreciated.
    Thanks & Regards,
    Vaibhav Gupta

    I have a MTS (Master Test Script) which references 4 Test Scripts. As of now, I am able to run this MTS directly by opening it as a Test Script and running it for default test data.
    Now, I want to run this MTS in SAP ECATT Test Configuration for multiple variants/test data. I am not able to see any parameter if I enter MTS in the Test Configuration.
    Below thread is similar to my requirement but I am not able to understand the solution properly.
    eCATT - how to run multiple test scripts with input variables in different test scripts?
    Any help in this case would be highly appreciated.
    Thanks & Regards,
    Vaibhav Gupta

  • Hi, I got the problem with Firefox 27.0.1. I can not run Selenium on Firefox after login a website for automation testing. The browser is not responding.

    Hi, I got the problem with Firefox 27.0.1. I can not run Selenium on Firefox after login a website for automation testing. The browser is not responding. However when I close Nunit, the page is back to be normal. The title is returned to the name of website without "not responding". I sure this problem did not happen on Firefox version 26. I just got this problem when firefox upgrading automatically to version 27. Please help me fix this problem because it is very important for my work. If you need more information pls send your concerns via my email address.
    Thanks so much

    Hi, the work around suggested above should put you in working mode in the meantime. However to help investigate the issue it is possible to analyze what is not loading or taking a long time by analyzing the network traffic or http headers of the Nunit web page.
    *[https://addons.mozilla.org/en-us/firefox/addon/live-http-headers/]
    *Web developer Tools > Web console
    If you post the results with out the user data, we are happy to help.

Maybe you are looking for