Tether & Develop Settings in LR3 always get the 'Update Process Version'

I am using tether with develop settings in LR3. I keep getting the 'Update Process Version' and it won't apply the filter unless I click the (!). It does this with newly created presets. Please help.

awimaging wrote:
bit of a waste of £78!
Erm, 2 words... free trial?
Anyway, let's get you sorted out. Are you the same hania on the POTN forums, or do you just have the same problem?
First things first, when you mention repairing permissions, I guess you're a Mac user.
First, hold down Opt while starting LR and see if you can start a clean catalog ok. That'll determine whether it's catalog specific.
Then go to Macintosh HD / Users / [your username] / Library / Preferences / and move or delete any com.adobe.lightroom*.plist files.
And while you're there, I'd also go to Macintosh HD / Users / [your username] / Library / Application Support / Adobe / Lightroom / and move that Lightroom folder somewhere else for the moment.
Then see if it works. Could be a few things - most likely are a problem with the catalog, corrupted preferences file, or a preset that it doesn't like. We can exclude those quite easily using the above.

Similar Messages

If I'm in Lightroom 5, and try to Edit in Photoshop CS6, I always get the following message: "This version of Lightroom may require the Photoshop Camera Raw plug-in version 8.6 for full compatibility." But I have updated to 8.6 and have no remaining updat

If I'm in LIghtroom 5, and try to Edit in Photoshop CS6, I always get the following message: "This version of Lightroom may require the Photoshop Camera Raw plug-in version 8.6 for full compatibility." But I have updated to 8.6 and have no remaining updates. How can I fix this?
If I click "Open Anyway" or "Render using Lightroom", I get the following message:
"Adobe Photoshop CS6 cannot be opened because of a problem.
Check with the developer to make sure Adobe Photoshop CS6 works with this version of OS X. You may need to reinstall the application. Be sure to install any available updates for the application and OS X."
Please tell me what to do so I can edit from Lightroom to Photoshop.

In Photoshop, if you choose Help - About Plug-in... - Camera Raw, does it say 8.6?
Seems to me there was some hiccup they found in the update process, which prompted this:
Camera Raw updates cannot be applied
I honestly don't know if the problem could apply to 8.6 as well, which is why I asked you to check to make very sure you really got it.
-Noel

Why do i always get the Japanese version of JRE/JDK?

why do i always get the Japanese version?
i am in tokyo and i just want to get the English version of JRE and JDK. Why is it so difficult, I have been trying for the last 8 hours to find mirrors and other versions and installing all of them only to see they are all in Japanese and I don't know why. I checked my settings, my local language is German or English, i.e. not Japanese, and always I install it it's in Japanese and afterwards I get the compiler messages in Japanese and I don't understand them.
And then... why is it so difficult to make a comment at sun? i have been to ibm's page and google, you just fill out a form send it, it takes 5 secs, here it takes 20 minutes to find where you can ask a question, then some more to fill out the questionaire...
could you pls tell me where to get the US/english version for jre 1.4.2.x and jdk 1.4.2.x?

You probally ARE getting the english version. If you are using a japanese version of windows or an english version of windows with the locale setting set to Japan then all of the menus (including the installer) will be displayed in japanese. So it just seems like you are installing a japanese version.
To check your local in windows 2000 go to the control panel and then choose regional options. Then, select the general tab and change your locale to one of the English locales. Also, if you want to keep your locale setting set to Japan there are other workarounds. However, first try this.

How come, when I add myYahoo! email account to MAIL, after verifying, I always get the "server unavailable. please try again later"

How come, when I add myYahoo! email account to MAIL, after verifying, I always get the "server unavailable. please try again later"

THANKS! this worked !!!
I hit "DELETE THIS ACCOUNT" on my iphone (this is the Yahoo I tried to set up by "picking" it from the list that the iphone5 gives you) and then confirmed to delete everything.
THEN: while in Mail (still in the Settings Section) I tapped on "ADD ACCOUNT..." but this time tapped on "OTHER" and manually put in my yahoo ID and password and I did not even have to go to the SMTP or IMAP incomming/outgoing stuff at all. But I checked it out under the "ADVANCE" tab and it was already correct for yahoo. (ALMOST SEEMED TOO EASY)
Went to my home screen and tapped on MAIL and my yahoo email loaded up just right!
Now, I have no idea if I have any other issues like if I delete mail on the iphone; does it delete properly on my ipad...etc..etc. but one problem at a time is getting fixed. THANKS!

WRT54GS: without Windows, force a given MAC address to always get the same IP address via DHCP?

I have just now set up my WRT54GS to manage my home wireless network, and it works great. I just have one question that I haven't been able to find an answer for (forgive me if I have overlooked an obvious source of information).
I have set up the WRT54GS to be a DHCP server, and it assigns addresses in an ad hoc manner to all the devices that connect to it. In general, this is what I want, but in one case, I want a certain host to always get the same IP address, for example, 192.168.1.10.
You should know that I have no Windows machines on my network. Everything is either running Linux, MacOSX, or Symbian (on a Nokia N95 handheld). Therefore, I can't set up a static IP for my device using the software supplied on the CD that comes with my router, as that software only runs under Windows.
Using a different manufacturer's router, I am able to accomplish this by telling the DHCP software on that router to always assign 192.168.1.10 to the host who connects with a certain MAC address. I can then use this mechanism to force my specific host to always get this desired IP address. However, I haven't been able to find any way to do that with the WRT54GS without the software on the Windows-based CD. Is it possible at all? If I can indeed do this without that Windows software, could someone point me to some docs which explain how to accomplish this?
... or is there perhaps a different way to cause this to happen, perhaps by means of some sort of DHCP client ID?
Thank you very much in advance for any pointers you can give me.
Message Edited by HippoMan on 10-16-2007 05:27 PM
Take a hippopotamus to lunch today.

Forget about the CD. There is nothing on the CD which you don't configure better through the router web interface at http://192.168.1.1/ You don't need the CD. Never. I have never used the CD to configure any of my routers. The program on the CD is just a software which helps you with the initial configuration of the router. It is just a software which pretty much contacts the web interface in the background and sends some settings changes there. You can do everything yourself directly. Then you know what you change.
You have to configure the static IP address on the computer and on the computer only, e.g. on your Mac use Static IP instead of DHCP in the network preferences. Enter the IP address you want to use for the computer, the subnet mask, gateway address and DNS server(s). That's it. The router is not involved in any of this.
You just have to make sure that you use an IP address inside the LAN of the router. By default, Linksys routers use the IP address 192.168.1.1 on the LAN side for the the router. The subnet mask is 255.255.255.0. The IP address together with the subnet mask says that all IP addresses 192.168.1.0-255 are considered part of the LAN. Everything else is outside and needs to be routed to the router and from there into the internet. (If you want to know how the subnet mask works exactly read the wikipedia article on it or search for "subnet calculator" or similar in the internet)
Thus, if you connect a computer to your LAN and set a static IP address on the computer it should be inside this IP address subnet/range in order to have internet and LAN access on the computer. It does not matter which address you use as long as it is inside the IP subnet. The DHCP server on the router automatically assign a correct IP address inside the IP subnet and also automatically assigns the correct gateway address (its own address = the address to which everything should be sent which does not belong into the LAN, i.e. the internet traffic) and the DNS server. With static IP you have to assign those values yourself.
But again, there is no Windows computer or CD involved to do that nor is there any configuration on the router required to set the static IP address on the Mac. The IP address you set must simply match your LAN IP which is basically defined through the settings on the router as you want to have internet and thus need access to the router and its address 192.168.1.1.
Some routers allow you define fixed IP addresses for specific devices in the DHCP server of the router. With that function you can set a fixed IP address on the router. The computer can remain on DHCP. It will always get the IP address you have configured in the list on the router through the DHCP server. However, your Linksys router does not have this option. If any device inside your LAN is supposed to receive the same IP address at any time you have to configure that on the device only.
If you have not changed the default LAN IP address, subnet mask and DHCP server settings on the router, the router has 192.168.1.1, subnet mask 255.255.255.0 and the DHCP server uses 192.168.1.100-149 for dynamic assignments. To avoid potential address conflicts you should not use any static IP addresses inside the DHCP server address pool. This leaves you with IP addresses 192.168.1.2-99 and 150-254 as static IP addresses inside your LAN. You can pick any address you like as long as any device with a static IP address has a unique IP address inside your LAN.
Assign the subnet mask 255.255.255.0 on the computer and set the default gateway to 192.168.1.1. The DNS servers are a little bit more complicated. Generally it is better and faster if you use the DNS servers of your ISP. You can, however, also use the IP address of the router 192.168.1.1 as DNS server. The router will then operate as DNS proxy, i.e. it contacts the DNS servers of your ISP for any request from your computer.
If you want to use the DNS servers of your ISP, click on the Status tab in the router web interface. It shows you the current settings of the router on the internet port. It should show you multiple entries for DNS servers. Choose those DNS server IP addresses in the computer.
If you don't want to go through the hassle with the direct access to the DNS servers of your ISP, simple use 192.168.1.1 as only DNS server on the computer.
There are all settings you have to make on your Mac or other computers to assign a static IP address. As long as the IP address is inside 192.168.1.* it belongs to the LAN and has internet access through the router (as long as the default gateway address is 192.168.1.1 of course).
Firmware is loaded either through the web interface of the router, usually somewhere on the Administration tab or with tftp. Both ways work fine on any Mac or Linux box.

HT201407 How can I activate my iPhone if both is not working in WIFI nor in iTunes? I always get the "Could not activate" message.

I restored my old model of iPhone to factory settings successfully by following the restoration details in Apple website but soon as I press the next icon during configuration for the phone activation, I always get the "Cannot activate phone" message. Have I done anything wrong with the restoration causing this error?

Generally this is a sign that the iPhone had previously been
hacked/modified/jailbroken and the update relocked it to the
original wireless carrier. If this is the case, only that wireless
carrier can unlock your iPhone. You must contact them to see
if they offer unlocking and if you qualify.
What wireless carrier did you use before this problem?
Does the app Cydia appear on your iPhone?
What does it say when you look at Settings=>General=>About=>Carrier?
Unauthorized modification of iOS
http://support.apple.com/kb/HT3743
If your iPhone has not been jailbroken, see the troubleshooting suggestions here:http://support.apple.com/kb/TS3424?viewlocale=en_US

Why I always get the error(ORA-00600)?

Why I always get the error(ORA-00600)?
My database Oracle 9.2.0.1.0 I installed Oracle Jdeveloper 9i on my computer.
OS:windows2000
My program:
Class.forName("oracle.jdbc.driver.OracleDriver");
con =java.sql.DriverManager.getConnection("jdbc:oracle:thin:@server:1521:db","developer","12345");
java.sql.Statement stmt=con.createStatement();
java.sql.ResultSet rs=stmt.executeQuery("select task_title from task");
while (rs.next()){
     //getInformation
     String fjbh=rs.getString("task_title");
If I use this in a common java program(like MyParser.java). It will work well:
D:\JavaApp> java MyParser
but If I put the code into a JSP file . It will not work.I tried several times.
I find that the statment:
     java.sql.ResultSet rs=stmt.executeQuery("select task_title from task");
will throw the exception.It seemd that I can connect to the database ,
but can not execute some sql statment.
If I execute this sql statment:
     select sysdate from dual ;
     or
     select task_ID from task ; --task_id is a column with the type NUMBER(10)
it will work.
but if I execute :
     select Task_Title from task where task_id=1; --Task_Title is a column with the type VARCHAR(50)
     or
     select t.task_text.getCLOBVal() task_Text from task t where task_ID=1;
               --task_text is a column with the type XMLTYPE, I use this column save XMLFile.
it will not work.
the detail error information as follow:
java.sql.SQLException: ORA-00600: internal error code, arguments: [ttcgcshnd-1], [0], [], []

It is a database bug (an ORA-0600 almost always is). In this case it is bug# 1725012. You can see the details from MetaLink. There are some patches (by platform) available you should see which may apply to you.

Bug: WebcamPublisher always gets the first camera

Hi,
It seems WebcamPublisher always gets the first camera in the list, no matter what camera is chosen by the end user. Beside this, at some point in WebcamPublisher, it has been hardcoded to use Apple's isight camera, if no cam was found:
if( _camera==null){
// If there is no camera , create it and attach it to the stream
if (_cameraNameIndex==null && Capabilities.os.indexOf("Mac OS 1")!=-1) {
// it's silly season - let's try to detect iSight cams, if nothing gets specified
var l:int = Camera.names.length;
for (var i:int=0; i<l; i++) {
if (Camera.names[i]==ISIGHT_NAME) {
_cameraNameIndex = i+"";
break;
Could someone from the lccs development team respond about the quality of code in lccs library, and whether the lib is supposed to be ready for production use. I have asked this in my previous post, but not response has been given so far.
Aureliano

Hi,
The WebcamPublisher by default, selects what is returned by the player's Camera.getCamera() API i.e. the default camera player could detect. This is when _cameraNameIndex is null. If you want, you can set the cameraNameIndex property i.e. the camera name string( you can do that by getting Camera.names API in flash player) before starting the Webcam. It will then take the camera you mentioned.
In fact we have one of our real life application that uses this property to set the camera you want to see.
You can always use your handler to the selected value of camera in SecurityPanel.CAMERA and set it to the cameraNameIndex property.
And lastly, yes our code is production ready. We have our own commercial apps as well as enterprises using it for building application. If you want to change any part of the code, you are free to do so.
Hope this helps
Thanks
Hironmay Basu

I try to export my Imovie and I always get the error code"Unable to prepare project for publishing...File already open with write permission" it even does it when I am just trying to export to my external hard drive to save the file

I try to export my Imovie and I always get the error code"Unable to prepare project for publishing...File already open with write permission" it even does it when I am just trying to export to my external hard drive to save the file

Thanks!!! I had same error (with -49) and the mac had an external hard drive attached.. and it was doing a backup. Stopped, disconnected and the project exported!

I am trying to listen BBC radio news from BBC App, but on pressing the button I always get the error "there was an error playing this radio feed". What is the source of this error and how can I remove it?

I am trying to listen BBC radio news from BBC App, but on pressing the button "live radio" I always get the error "there was an error playing this radio feed". What is the source of this error and how can I remove it?

That is probably just a generic error message and you might not ever know what is causing it. Assuming that you have been able to play live radio with the app in the past (I know nothing about the app) and assuming that all other Internet related functions (Safari, email, etc.) are working properly on your iPad, quit the app completely and reboot your iPad.
Go to the home screen first by tapping the home button. Double tap the home button and the recents tray will appear with all of your recent apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
If that fails to resolve the issue, you might want to reboot your router, unplug it for about 30 seconds and then plug it in again.

I am using Windows 7 64-bit. After installing Photoshop Elements 13 and trying to run it I always get the message: Photoshop does not work anymore. And it doesn't.

I am using Windows 7 64-bit. After installing Photoshop Elements 13 and trying to run it I always get the message: Photoshop does not work anymore. And it doesn't.

Hi Hardy Tasso,
Are you seeing this problem since first launch of PSE13 after installation or recently?
Please try:
Keep Ctrl + Alt + Shift keys pressed while launching PSE13 Editor and click OK on the dialog that comes next.
Thanks,
Anwesha

I keep getting notified that there is an update to Firefox Weather 2.0.1 but when I try to install it I always get the same "download error" -228. How do I get around this?

I don't think additional details will help since I don't have any. I have tried repeatedly to install this update and always get the same result which I have already detailed. This is technically an Add-On but I was given no place to ask questions about it.

See if this helps you. <br />
https://support.mozilla.com/en-US/kb/unable+to+install+add-ons#Download_Error_228

I cannot get Elemtnts 13.1 to download completely. I have three different case numbers from Adobe and nothing helps. I always get the "download failed" and the error code u44m1i210.

I cannot get Elements 13.1 to download completely. I have 3 different case numbers from Adobe and nothing helps. I always get the "download failed" and the error code u44m1i210. I would either like to get the product downloaded or eliminate the constant attempt which just ties up my computer.

You could try the direct download links here
Adobe Photoshop Elements 13 Direct Download Links, Premiere too | ProDesignTools
And here is some info on that error code
Error U44M1I210 | Install updates

I had Adobe Acrobat Serial loaded before The hard drive crashed on my old PC. I have tried to download Acrobat 9 on my new PC, but always get the message "This is not a valid serial number". I had Adobe 9 Standard on the old. But what downloads from th

I had Adobe Acrobat Serial loaded before the hard drive crashed on my old PC. I have tried to download Acrobat 9 on my new PC, but always get the message “This is not a valid serial number”.
I had Adobe 9 Standard on the old. But what downloads from the page http://helpx.adobe.com/acrobat/kb/acrobat-8-9-product-downloads.html is Adobe 9 Pro. Perhaps this Pro version is the problem.
Anyway, can you point me to a way to install Adobe on my new PC?

You can try Download Adobe CS5 Free Trials – All Direct Links without Akamai | ProDesignTools.

Since downloading iOS 7, I have been having trouble purchasing music from iTunes Store. When ever I try to make a purchase I always get the message "Your account is not valid in the US store"

Since downloading iOS 7, I have been having trouble purchasing music from iTunes Store. When ever I try to make a purchase I always get the message "Your account is not valid in the US store" As I am new at this I don't know what I can do to remove this problem.

What country are you in ? If you aren't in the US and the address on your account isn't in the US then try going to the bottom of the Featured tab in the App Store app on your iPad and tap on your account id, tap on 'View Apple ID' on the popup and log into your account, and then select the Country/Region section and select your country.

Tether & Develop Settings in LR3 always get the 'Update Process Version'

Similar Messages

Maybe you are looking for