Tethering is not working with static IP address iOS 5, 6, 6.1

When I use in our country - Czech Republic (carrier Telefonica O2) static IP address, I must use APN "internet.s". When I turn-on Personal Hotspot with this APN, it is possible to connect to this wifi hotspot, but withnout access to internet. iOS 5, 6, 6.1
Do you have same experience?

I've just wasted 2 HOURS diagnosing non-existent router issues due to this OSX "bug"
Thank you for the workaround. Let's hope they get this resolved soon!

Similar Messages

Lightroom 4.4 Tethering does not work with Nikon D7100

A week ago i bought my new Nikon D7100. Yesterday i wanted to try the thetering of Lightroom 4.4.
It worked with my Nikon D5100 but it does not work with the new camera.
Is it a problem with my camera or with Lightroom?
Another question does tethering work with Lightroom 5?

...And Google says:
Tethered camera support in Lightroom

HT5538 Why is my iMessage not working with other email address just says verifying but nothing happens been a week, 4 devices only I

iMessage not working on all my 4 devices use separate emails now cannot use them it just says verifying same with FaceTime?

Hey Mgpr,
There's an article that helps with troubleshooting steps for issues activating iMessage that I think is worth a look. See if any of the suggested steps work for you:
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Sincerely,
Delgadoh

IsValid does not work with extended email address

This invalidates valid addresses.
<cfset testemail = '"No One"
<[email protected]>'>
<cfoutput>#testemail#</cfoutput><br />
<cfif isValid("email",testemail) >
good email
<cfelse>
bad email
</cfif>
Any ideas how to make this work with extended
addresses?

> blah blah <[email protected]> is a predictable format.
You can use string functions to find the part between the angle
brackets and apply the isValid function to that.
Yep, but isValid() just doesn't reliably validate even the
email address
part of that string (well: that *exact* example, sure it
will). It can't
be used to RELIABLY validate email addresses. The regex it
uses is
incomplete. It'll validate a lot of valid email addresses,
but it'll also
reject a number of valid patterns, and validate some that are
wrong.
Adam

MY WHATSAPP HAUTELOOK FACEBOOK APPLICATIONS ARE NOT WORKING WITH THE NEW UPDATE iOS 7 ITS DRIVING ME CRAZY! HOW CAN I FIX IT?

I DOWNLOADED THE NEW UPDATED VERSION FOR THE IPHONE !!!
AND MY APPLICATIONS ARE NOT WORKING AT ALL
WHENEVER I ENTER TO WHATSAPP A MESSAGE POPS UP FROM NOWHERE SAYING SOMETHING ABOOUT PUSH UP NOTIFICATION!!
AND THAT I SHOULD CONNECT IT TO ITUNES, THEN I CONNECT IT TO ITUNES AND ITUNES IS NOT LETTING ME SIGN IN WITH MY APPLE ID ITUNES IS NOT WORKING/!!!
ALSO WHENEVER I OPEN HAUTELOOK APP ON THE IPHONE IS FREEZING MY PHONE WITH THE PUSH UP NOTIFICATION WINDOW, AND I CLICK OK AND IT STILL APPEARS OVER AND OVER AGAIN
PLZ HELP ME!!!!!!!!!!!!!!!!!!!!!

If you do not have enough space, then you would have to free up more space.
You can also update via itunes on your computer.

Camera adapter not working with iPhone 4 and iOS 4.3

Hi all..
When connecting the camera adapter to my iPhone I get the this accessory is not supported. I have rebooted the phone with no avail.. Any ideas?

Apple's Camera Adaptor - named the iPad Camera Connection Kit is not compatible with the iPhone. It is compatible with the iPad only.
http://store.apple.com/us/product/MC531ZM/A?fnode=MTc0MjU4NjE&mco=MTc5OTU4MTA

Search not working with static merge

I last used JavaHelp about 2 years ago, but have just picked it up again. I think the JavaHelp team at Sun have done a good job with version 2.0.
I am doing a static merge on three small help sets.
The search works fine on each help set individually, but when I do the merge and try a search from the JavaHelp Viewer only results from the first (master) help set are returned.
I am using JavaHelp 2.0 and JSDK 1.3.1_06.
I have used jhindexer on each help set.
The following code is the same in all three HelpSet.hs files:
<view mergetype="javax.help.SortMerge">
<name>Search</name>
<label>Search</label>
<type>javax.help.SearchView</type>
<data engine="com.sun.java.help.search.DefaultSearchEngine">HelpSet_JavaHelpSearch</data>
<image>Orange_Nav_Search</image>
</view>
Can anyone help?
Tom F

Hi, I had the same problem recently and fixed it by upgrading to javahelp 2.0_01. Here's the link to the new JavaDesktop forums where I was helped:
http://www.javadesktop.org/forums/thread.jspa?threadID=496&messageID=3103#3103
Hope this takes care of it!
Luke

List Tile View not working with include rule on iOS?

hi Expert,
I used the List Tile View with include rule in Agentry 6.0 on WinCE before to generate "selected" object list upon different conditions, e.g., assigning tasks based on scenarios.
Currently, I am experimenting the same function on iOS tablet.
On the start screen which is a detailed screen for main object, there is a List Tile View and an include rule. However, the objects in the tile list are not updated correctly when the output of the rule changes. Note that the same include rule works perfectly with a List View for the same collection.
To my observation, the problem seems to associated with "update" of the tiles when result of include rule changes. For example, in scenario 1, there are 5 objects in the list; switching to scenario 2, there are 10 objects. From the No.6 to No.10, the objects are correct. The No.1 to No.5 are still the original 5 objects for scenario 1.
When the user clicks on tiles, it makes the situation worse. Normally, a single object's tile will always be shown in the selected tile regardless which tile is selected from the list.
My development environment is 6.0.40 and the client is 6.0.40 on iPad (iOS 7.1). I would like to know whether this is a known issue before I provide more details.
Thanks.
-Yang

hi experts,
When I asked the question on this list tile view refreshing issue, my dev environment is Agentry 6.0.38.
In Agentry 6.0.40.1's release note, there is a fixed
AG-25821 iOS 7 refresh issue with iPad tile list
However, I currently have Agentry 6.0.42.1 on iPad (iOS 7.1.2). And my editor/server is 6.0.42.0. I still have the list tile view refreshing issue. The same rule can be used on list without any problem. But the list tile still has trouble on display the right set of objects.
My question is is that fix related to the problem I saw?
Thx.
-Yang

Instant personal hotspot not working with iphone 6 on ios 8.1

on my mac, i am not able to see iphone 6 for personal hotspot connection like i can see my ipad mini, both running on ios 8.1 my mac is on yosemite. i still have to connect to my iphone in the old way for personal hotspot.
any help?

Hello AceNeerav,
Thank you for using Apple Support Communities.
You can use the following article to troubleshoot Personal Hotspot:
iOS: Troubleshooting Personal Hotspot
Regards,
Jeff D.

I have recently upgraded my iMac Intel G5 iSight to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old sys parts

I have recently upgraded my iMac Intel G5 iSight (iMac5,1) to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old system parts. I have zapped PRAM. The blue indicator in system audio panel will appear for a second as I slide the bar for internal mic but then it disappears. Is there a fix?

The sound seems very faint but can here static on playback.

Flash player does not work with new ICS Android 4.0.4 OS. Has this problem been addressed?

Flash player does not work with new ICS Android 4.0.4 OS. Has this problem been addressed? I am using Firefox Beta for android and I also tried just Firefox.

Please check the Play Store app for any Flash updates and install them if present.

TS4139 I had 2 MobileMe email addresses, but only went thru ICloud process with one (my main address). Now the secondary address is not working with iCloud. Did I have to go thru the process with both addresses? Can I get that address back?

I had 2 MobileMe email addresses, but only went thru iCloud process with one (my main address). Now the secondary address is not working with iCloud. Did I have to go thru the process with each address? Can I still get that secondary address to work with iCloud?

It was totally separate. I just now went back to a previous email from Apple to that secondary address which urged me to transition to iCloud. I followed the link and it prompted me thru the process and the address is now able to send/receive emails. Thanks.

I have recently switched ISPs and have anew e-mail address but ThunderBird will not work with this address. Have tried tech staff with Bell to no avail

My old e-mail address was SHAW XXXXX.and worked very well with Thunder Bird mail. I recently switched to new ISP Bell and my new address is XXXXXX However with several attempts with techs ,Thunder Bird will not work with my new ISP. I had to start using Outlook.com and Outlook Express 6 for e-mail,but I really liked Thunder Bird and have numerous e-mails stored in it that I cannot import.
Outlook Express 6 is outdated and because I am running Windows XP it will not give me a newer version.I find Outlook.com confusing to me. Can you help

Why don't you tell us what you did and why it didn't work? Start from File/New/Existing Mail Account, enter your details, click Continue, then immediately click Manual config. On the next screen enter these settings:
incoming POP server: pophm.sympatico.ca
port: 995
Connection security: SSL/TLS
Authentication: Normal password
User name: your full email address
outgoing SMTP server: smtphm.sympatico.ca
port: 587 (or try 25)
Connection security: STARTTLS
Authentication: Normal password
User name: your full email address
http://support.bell.ca/Internet/Email/How-to-use-Bell-Mail?step=3
Also, enable POP access as mentioned in the link.

Caller ID not working with Nokia 6600?

I have a T-Mobile (US) Nokia 6600, and I can't seem to get address book to display incoming SMS or the caller ID of incoming calls. I've successfully paired the phone via bluetooth, and I can make address book dial the phone and send an sms. I can sync via iSync, use my phone as a modem, etc. etc.
But regardless of what settings I tweak, I can't seem to get Address Book to show a bezel of any kind on incoming calls - not even an 'Unknown Caller' message! Am I missing something obvious? Third party apps like BluePhoneElite work just fine, so I'm pretty sure it's something wrong with Address Book...
15" Aluminum Powerbook 1.5 GHz Mac OS X (10.4.5)

mdcdsc wrote:
My caller ID does not work with the new ap either. I don't like the new ap at all. The old one was beautiful. Now my email is very hard to see, so much that I will just use the Apple email that comes with my IPOD. The caller ID was my favorite thing with the old ap. and now it doesn't work. I have followed the instructions and turned everything on, but it just does not work.
The Caller ID issue was due to an outage. It should be resolved anytime soon. Can yu log out and log back in. Go to app settings and in notifications and turn CAller ID off and on.
On email - what do you mean 'email is very hard to see' ? I would like to pass on this feedback to the team.

External USB HD does not work with HAL:

External USB HD does not work with HAL:
From the last 10 days the HAL auto-mount with ntfs-3g file system of my external hard drive does not woks.
But the manual mount procedure with the command mount -t ntfs-3g /dev/sdb* /mnt/XYZ works.
I've followed the instructions in the wiki: http://wiki.archlinux.org/index.php/HAL and the system has worked up to the last kernel or HAL update.
My fat32 usb-stick works without any problem.
If I try to open the device with KDE it appears an error popup wit this message:
TODO: have to rethink extra options
Error: kio_media_mount_helper
The log from the kernel.log is
Nov 6 22:03:16 myhost usb 5-1: new high speed USB device using ehci_hcd and address 4
Nov 6 22:03:16 myhost usb 5-1: configuration #1 chosen from 1 choice
Nov 6 22:03:17 myhost Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Nov 6 22:03:17 myhost ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Nov 6 22:03:17 myhost Initializing USB Mass Storage driver...
Nov 6 22:03:17 myhost scsi6 : SCSI emulation for USB Mass Storage devices
Nov 6 22:03:17 myhost usb-storage: device found at 4
Nov 6 22:03:17 myhost usb-storage: waiting for device to settle before scanning
Nov 6 22:03:17 myhost usbcore: registered new interface driver usb-storage
Nov 6 22:03:17 myhost USB Mass Storage support registered.
Nov 6 22:03:22 myhost scsi 6:0:0:0: Direct-Access WDC WD32 00JB-00KFA0 0811 PQ: 0 ANSI: 0
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Nov 6 22:03:22 myhost sdb: sdb1
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Attached SCSI disk
Nov 6 22:03:22 myhost sd 6:0:0:0: Attached scsi generic sg2 type 0
Nov 6 22:03:22 myhost usb-storage: device scan complete
and the error.log is
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Do you have some idea ....
Bye.

I have done the following:
Downloaded the patched hal version.
used makepkg in /abs/local/trunk/ to create a pkg for pacman
used sudo pacman -U pkgname to install it.
used sudo nano /etc/hal/fdi/policy/preferences.fdi to create the fdi file with the following content:
saved the file and removed my ntfs entryes from fstab and rebooted. and still there is no automount off ntfs partitions.
have i done something wrong?
br fjodork
WARNING: what follows is a guide of what did work for me, I'm still in an early stage of learning linux, so please correct me if anything of what follows is wrong/dangerous/stupid. As I said, this worked for me, it's not pretty, since I was learning each step on the fly and I'm sure there are better ways to do this.
So fjodork, you seem to have done the the necessary steps, though i couldn't get it to work until i first removed hal without dependencies
pacman -Rd hal
it will give you some warning about the dependencies, ignore it since we are reinstalling hal in a few steps.
First i tried to follow Raymano's link, obviously it showed me nothing in the browser so I thought it might be a broken link.
So I downloaded the source tarball from here http://hal.freedesktop.org/releases/hal-0.5.10.tar.gz
unpacked it changed the /tools/hal-storage-mount.c as per Milfadoodle's instructions.
at first I tried to compile directly from source, the process would finish without a glitch though after reboot nothing changed, as if hal weren't
installed, i guess there were issues with paths. anyway read on
Then repacked the source in tarball, copied it to /var/abs/extra/system/hal and modified the PKGBUILD as follows
makedepends=('pkgconfig' 'gperf')
options=('!libtool')
install=hal.install
source=(${pkgname}-${pkgver}.tar.gz #removed url so makepkg looks in the current directory for the tarball
hal
hal-policy.patch
cryptsetup_location.patch
hal-0.5.9-hide-diagnostic.patch
ntfs3g-valid-options.patch)
md5sums=('6641c30a27c00485c6accac5110ff911' # replace with md5sum of your package's sourceball (run md5sum filename)
'882f67668cb14a0a9e4a27ef22278027'
'5ba8b610aa9763a5f42b9f7cbd7a86ad'
then makepkg (i had to add --asroot, don't ask why
and finally pacman -U hal-0.5.10-1-i686.pkg
another reboot and everything worked without a glitch!:D (yeah i know i still haven't got rid of the reboot mentality )
I have also put the policy files as per the wiki instructions.
PS: I know this is a dirty way to getting things done but as i said, I'm just starting
If anyone could comment/correct/explain this post I'd be more than happy, the automount issue was bothering me for about a month now (you'll say why do I need ntfs in the first place? well, I only recently switched for Linux as my primary OS, these are some relics of the M$ era

Tethering is not working with static IP address iOS 5, 6, 6.1

Similar Messages

Maybe you are looking for