List Tile View not working with include rule on iOS?
hi Expert,
I used the List Tile View with include rule in Agentry 6.0 on WinCE before to generate "selected" object list upon different conditions, e.g., assigning tasks based on scenarios.
Currently, I am experimenting the same function on iOS tablet.
On the start screen which is a detailed screen for main object, there is a List Tile View and an include rule. However, the objects in the tile list are not updated correctly when the output of the rule changes. Note that the same include rule works perfectly with a List View for the same collection.
To my observation, the problem seems to associated with "update" of the tiles when result of include rule changes. For example, in scenario 1, there are 5 objects in the list; switching to scenario 2, there are 10 objects. From the No.6 to No.10, the objects are correct. The No.1 to No.5 are still the original 5 objects for scenario 1.
When the user clicks on tiles, it makes the situation worse. Normally, a single object's tile will always be shown in the selected tile regardless which tile is selected from the list.
My development environment is 6.0.40 and the client is 6.0.40 on iPad (iOS 7.1). I would like to know whether this is a known issue before I provide more details.
Thanks.
-Yang
hi experts,
When I asked the question on this list tile view refreshing issue, my dev environment is Agentry 6.0.38.
In Agentry 6.0.40.1's release note, there is a fixed
AG-25821 iOS 7 refresh issue with iPad tile list
However, I currently have Agentry 6.0.42.1 on iPad (iOS 7.1.2). And my editor/server is 6.0.42.0. I still have the list tile view refreshing issue. The same rule can be used on list without any problem. But the list tile still has trouble on display the right set of objects.
My question is is that fix related to the problem I saw?
Thx.
-Yang
Similar Messages
-
Design View not working with skins
Hey,
Excuses, I posted this question earlier in the "general
discussion" topic.
I'm using Adobe Flex 2. I have a pretty big project. If I
open it, design view works. If I close Flex and open the same
project again, design view wont work. There aren't any
error-messages or warnings given. I have been able to track te
problem down to graphical skins in a CSS declaration. I have to
erase them, to make Design View work. Then, I paste the code back
again. This is very inconvienent. Is this a normal problem,
inherent to how Flex works. Is there an other, easier way around?
Thanks in advance!
Knut Nidelven
Here is the code that does the damage...:
.topBar {
fontFamily: Arial;
font-style: none;
fontWeight: normal;
font-size: 12px;
upSkin: Embed('assets/button_top_up.png',
scaleGridLeft="4",scaleGridTop="4",scaleGridRight="12",scaleGridBottom="12");
overSkin: Embed('assets/button_top_over.png',
scaleGridLeft="4",scaleGridTop="4",scaleGridRight="12",scaleGridBottom="12");
downSkin: Embed('assets/button_top_selectedUp.png',
scaleGridLeft="4",scaleGridTop="4",scaleGridRight="12",scaleGridBottom="12");
selectedOverSkin: Embed('assets/button_top_selectedUp.png',
scaleGridLeft="4",scaleGridTop="4",scaleGridRight="12",scaleGridBottom="12");
selectedDownSkin: Embed('assets/button_top_selectedUp.png',
scaleGridLeft="4",scaleGridTop="4",scaleGridRight="12",scaleGridBottom="12");
selectedUpSkin: Embed('assets/button_top_selectedUp.png',
scaleGridLeft="4",scaleGridTop="4",scaleGridRight="12",scaleGridBottom="12");VIEW | Style Rendering > Display Styles?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Ganda1f" <[email protected]> wrote in
message
news:f11lt2$sv9$[email protected]..
> Hi All,
>
> Design view does not render ( just plain text, no
formating ! ) in CS3.
> So I
> loaded the same file in DW8 ( installed on same machine
) & it works fine
> !
>
> Anyone have any ideas why ?
>
> html doc is lnked via this:
>
> regards, Dave P
>
>
> <style type="text/css">
> <!--
> @import url("style.css");
> -->
> </style>
> -
Project Views not working with some Workspaces
i have the effect that the project views on some workspaces are not working.
i can enable/disable >Show Categories< as usual.
when i enable it the structure of the project looks like:
myproject.jpr
|
+---Sources
| |
| +----Miscellaneous Files
| |
| +------- all my files not structured
|
+---Business Components
It does not matter what kind of Categories i choose it remains the same.
In other workspaces on the same System Tab in the same System-Navigator everything works fine.
any suggestionrestart jdev didnt help but i
removed workspace from ide and added the workspace again,
now working again -
Mail conversation view not working with Listserv
Hello,
For the most part the conversation view in Apple Mail works great. The one place it does not work is for a listserv I am part of. I get a lot of emails form this group, they all come from the same address, so it is the same address in the To: field, the From: field is different for each message. I expected all the messages to be grouped by the same subject line but they are not. Other emails that I get that are NOT from a listserv group perfectly, so I feel it has to be something specific to getting emails from a listserv.Update......Somehow Mail sent 1/46 pending messages.....weird.
-
I DOWNLOADED THE NEW UPDATED VERSION FOR THE IPHONE !!!
AND MY APPLICATIONS ARE NOT WORKING AT ALL
WHENEVER I ENTER TO WHATSAPP A MESSAGE POPS UP FROM NOWHERE SAYING SOMETHING ABOOUT PUSH UP NOTIFICATION!!
AND THAT I SHOULD CONNECT IT TO ITUNES, THEN I CONNECT IT TO ITUNES AND ITUNES IS NOT LETTING ME SIGN IN WITH MY APPLE ID ITUNES IS NOT WORKING/!!!
ALSO WHENEVER I OPEN HAUTELOOK APP ON THE IPHONE IS FREEZING MY PHONE WITH THE PUSH UP NOTIFICATION WINDOW, AND I CLICK OK AND IT STILL APPEARS OVER AND OVER AGAIN
PLZ HELP ME!!!!!!!!!!!!!!!!!!!!!If you do not have enough space, then you would have to free up more space.
You can also update via itunes on your computer. -
Camera adapter not working with iPhone 4 and iOS 4.3
Hi all..
When connecting the camera adapter to my iPhone I get the this accessory is not supported. I have rebooted the phone with no avail.. Any ideas?Apple's Camera Adaptor - named the iPad Camera Connection Kit is not compatible with the iPhone. It is compatible with the iPad only.
http://store.apple.com/us/product/MC531ZM/A?fnode=MTc0MjU4NjE&mco=MTc5OTU4MTA -
Crystal Viewer not working with Parameterized file
When I run a classic ASP file without parameter collections, I can see Crystal Viewer with data from the db. This works fine.
If, however, I run an ASP file with parameter collections, I get static text only.
The viewer is not displaying records from the DB.
I have done researches online but can't seem to get this to work.
Any working sample of parameterized asp files will be greatly appreciated.
This is the only thing stumping me now.
Many thanks in advance for your assistance.
If you need code snips, please let me know.Hello Simflex,
as you refer to the legacy technology VB6 I recommend to post this query to the [Legacy Application Development SDKs|SAP Crystal Reports - Legacy SDKs; forum.
This forum is dedicated to topics related to legacy SDKs, including the Report Designer Component (RDC), OCX, VCL, and Crystal Reports Print Engine (CRPE).
It is monitored by qualified technicians and you will get a faster response there.
Also, all Legacy Application Development SDKs queries remain in one place and thus can be easily searched in one place.
Thanks a lot,
Falk -
RSS Viewer not working with the BBC Weather Service
Hi all
I am unable to display an anonymous RSS feed on my publishing site. I have checked similar posts but mine seems subtly different
in ULS
Cannot find site lookup info for request Uri http://open.live.bbc.co.uk/weather/feeds/en/??????/3dayforecast.rss.
My farm is patched to SharePoint 2013, August CU. I am building demo intranet for a client to help them with their requirements.
I have not touched the master page ( hoping to do that shortly in the branding phase) or embeded any JS.....yet
- BBC weather RSS feed ( have tried this also on the server to check for firewall issue)
- no Ajax options set
- Have disabled Data View Caching .. though not sure this makes any difference.
My next thought was to start looking to see if Web Proxy is causing my an issue. I have found this albeit for another version of SharePoint
<system.net>
<defaultProxy>
<proxy proxyaddress="http://Proxy_Server:port" bypassonlocal = "true"/>
</defaultProxy>
</system.net>
Now I have put in my actual proxy ip and port and I am getting close. Do I honestly need to hard code a credential here ( as I had to with AutoSPSourceBuilder)Kumar
Have you looked at the ULS logs to see if there are any clues.
As regards my issue, it has been 'fixed' but I think it is a tactical solution rather than one we will deploy in production
Ok, I noticed when I demoed the intranet to the client last Thursday that one of my feeds was working. I now understand that this dev server is no longer using the web proxy. In which case we have two scenarios
OOTB default Proxy
<!-- DAN: OOTB <defaultProxy / -->
<defaultProxy
This the "tactical" config I have now and all feeds work.
Proxy settings with bypass list
<defaultProxy useDefaultCredentials="true">
<proxy proxyaddress="http://Proxy_Server:Port" usesystemdefault="True"/>
<bypasslist>
<add address="http://open.live.bbc.co.uk" />
<add address="http://MyIndustryFeed/rss" />
</bypasslist>
</defaultProxy>
This is the config I had for my demo. The second feed didn't work till I added the address to the bypasslist.
If we were to reconnect the web proxy and use the above, I understand you need to ensure the proxy access on the server gets authenticated via the app pool account for the relevant web app - hard code credential or "always allow this
user ". If you go down this route I will be interested in how you get on..
As a consultant all I can do is raise support issues with the client - I am now allowed domain admin or web proxy access to verify ;-( -
DW9 (CS3) split view not work with ASP files?
I just installed and ran DW CS3 (ver 9.0 bulid 3481) -- I use
"coder" view for the screen layout. I like the split-view style
since I code inline HTML with my ASP and ASPX code. However, the
new version has the split-screen view button grayed out. How do I
enable split view when I edit files that are not just ending in
"htm" or "html" extensions? If the Adobe programmers made an
ASSumption then they need to issue a patch and remove it pronto. I
do not want someone else making decisions on how I do my work...I
get enough of that from Microsoft already, I do not need it from my
tools also. Please forward this to the developers if there is no
way to change my preferences, otherwise please tell me how to edit
a config file or hex-edit the executable to get this funtionality
back. TIA!I still can't figure out why the split view or design view is
grayed out and not accessible when editing files with an .asp or
.aspx extension and it is driving me crazy! I called the support
line and got someone in India who didn't understand my problem. 30
minutes later I finally got her to agree to transfer me to
secondary support but they were busy and she promised me they would
call the next day. That was over a week ago. I didn't even get a
voicemail, even though I stayed by my phone the whole day. I see
that support for DW under Adobe is no better than it was under
Macromedia...how sad. Microsoft Expression Web is looking better
and better every day....... :( -
RTP not working with Business Rule
I am trying to create a buisness rule that fixes on a member in a custom dimension based on a run time prompt using Calc Manger (11.1.2.2). I created the variable at the cube level, set it to 'Member' and selected the appropriate dimension, and selected RTP. The FIX statement is very simple FIX("Current",{Contract}). The rule validates and deploys with no problem. When running the rule either on form save or through Business Rules I receive the error: "error parsing formula for [FIX STATEMENT] (line 2): invalid object type. If I change the variable to uncheck 'RTP' and place the same member used previously as the Default value the rule runs no problem. Is there any reason why the rule appears to not be able to read in my RTP selection?
Thanks,
CSThough this is not a calc manager issue, I am sure the member that Planning is picking up is a member that is set tyo dynamic calc.
You cannot use a member that is set to dynamic calc in a fix.
-Sree Menon -
Composite view not working with Premiere Pro CC 2014
I've got a user in our office who, all of a sudden, can't see any image in composite view when editing in CC 2014 - the other views work OK and he's able to generate files OK, but he can't see the actual editable image in the editor. This is a problem .
Early '09 Mac Pro running Mac OS X 10.8.5. NVidia Quadro 4000 video card w/ latest CUDA driver (6.5.18).
Strangely, Adobe CC (non-2014) still works OK. And the user tells me that CC 2014 WAS initially working OK but that it suddenly stopped working. I've tried a reinstall; no luck.Just found the answer:
Composite Video Not Displaying on Source and Program Monitors -
Design view not working with external style sheet
Hi All,
Design view does not render ( just plain text, no formating !
) in CS3. So I loaded the same file in DW8 ( installed on same
machine ) & it works fine !
Anyone have any ideas why ?
html doc is lnked via this:
regards, Dave PVIEW | Style Rendering > Display Styles?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Ganda1f" <[email protected]> wrote in
message
news:f11lt2$sv9$[email protected]..
> Hi All,
>
> Design view does not render ( just plain text, no
formating ! ) in CS3.
> So I
> loaded the same file in DW8 ( installed on same machine
) & it works fine
> !
>
> Anyone have any ideas why ?
>
> html doc is lnked via this:
>
> regards, Dave P
>
>
> <style type="text/css">
> <!--
> @import url("style.css");
> -->
> </style>
> -
When I use the above media query in my stylesheet Live View ceases to update the viewport. I have to update it manually each time I add or change a style. This is not the case when I use styles under a common tablet sized query @media only screen and (max-width: 768px), or when there is no query at all. Is this a bug or is there something I am missing here?
Code errors might account for the discrepancy. Validate your code and fix any reported errors.
CSS - http://jigsaw.w3.org/css-validator/
HTML - http://validator.w3.org/
Nancy O. -
Tethering is not working with static IP address iOS 5, 6, 6.1
When I use in our country - Czech Republic (carrier Telefonica O2) static IP address, I must use APN "internet.s". When I turn-on Personal Hotspot with this APN, it is possible to connect to this wifi hotspot, but withnout access to internet. iOS 5, 6, 6.1
Do you have same experience?I've just wasted 2 HOURS diagnosing non-existent router issues due to this OSX "bug"
Thank you for the workaround. Let's hope they get this resolved soon! -
Instant personal hotspot not working with iphone 6 on ios 8.1
on my mac, i am not able to see iphone 6 for personal hotspot connection like i can see my ipad mini, both running on ios 8.1 my mac is on yosemite. i still have to connect to my iphone in the old way for personal hotspot.
any help?Hello AceNeerav,
Thank you for using Apple Support Communities.
You can use the following article to troubleshoot Personal Hotspot:
iOS: Troubleshooting Personal Hotspot
Regards,
Jeff D.
Maybe you are looking for
-
Time Capsule and Windows 7 clear approach
Hello all, I tried now for one month to install the Time Capsule (with Airport and Bonjour software) with Windows 7 WIRED. First I had to turn on the Net-Bios, which is difficult to find. I did. The Time Capsule was visible in the Windows File system
-
It seems that firefox installed correctly, but then it wouldn't open. I restarted my computer and still the same problem. I uninstalled it and reinstalled it and still the same problem.
-
Apple mail attachment encoding problem
I'm having the problem lately that either attachments aren't being decoded properly and the source is displayed in the email or that the entire email is being displayed like this: --Apple-Mail-7--951337123 Content-Transfer-Encoding: quoted-printable
-
Itunes error...gapless playback Help!
I just recently updated to the new itunes. i opened it. Synced a few songs on it then it came up with an error. the next time i opened it, in the box on the top where it says what song you are playing it said "determining gapless playback" then like
-
Database is not started using spfile
Dear Friends , I got a strange problem . My databasae is not started using spfile default . Sequences are as stated below : 1) SQL> startup pfile='/orafs/admin/MISLTEST/pfile/init.ora.082008214648'; ORACLE instance started. Total System Global Area 1