Text als data for charts

Hey there,
I'm new to numbers so excuse me if my question might have a very simple and obvious answer, but I've been trying to make this work now for about an hour or so and just can't come up with a solution, so here's my problem:
I have a column in my table, in which there are several texts entered. It's no special column, nothing like grey colored or so, just a simple column. Now i want numbers to create a pie chart that shows how often each oft the different texts is mentionend. So actually all i need are the total numbers of each text.
Let me give you an example...
If got three texts "a", "b" and "c" in my column. "a" is mentioned two times, "b" five times and "c" three times. Now I want my pie chart to have three sections that show that in 20% of the cases it's "a" in 50% it's "b" and in 30% it's "c".
Has anybody got an idea how to do that?
Thanks for your help,
A_K_15

Here's one way:
You construct a table with the counts. The formula in B2 of the Counts table, copied down, is:
=COUNTIF(Data::A,A2)
Row 1 is defined as a Header Row. Column A is a Header Column. If they are not already Headers, convert them via the contextual menu.
Select the entire table and choose pie chart.
SG

Similar Messages

How can I upload text master data for attribute-only Charactertic?

I can't create infosource for attribute-only Charactertic via direct update from Infoobject, because attribute-only Charactertics you can't choose from available infoobject.
How can I upload text master data for attribute-only Charactertic?
Thanks!

Hi roberto,
I soloved the problem. I can input the attribute-only char directly in the text box instead of choosing from list of infoobjects, but I still can't find the char in infoobject selection dialog even using search.

Filtering Data For Charts & Graphs

Hi,
I've been using numbers for a while now and have ran into a problem I can't solve. I'm working on a project for my work. What I'd like to do is enter each day's revenue in different categories and have Numbers calculate some stats on those numbers. I plan on making each year (for now, there will be 2008, 2009, and 2010) a separate sheet. That's the easy part.
To compare the numbers from year to year, I'd like to be able to specify certain dates. I know about hiding the rows that I don't want. However, how can I make the sums be only those rows that are showing-not all the rows? I also know I could easily do this month-to-month. However, I work at a pet resort-our income varies from season to season and the dates for different seasons vary. I'd like to be able to compare let's say all of Christmas vacation which might have been 12/23-1/3 in 2008 but 12/24-1/2 for 2009. Is there anyway to do this in Numbers? I'm well versed on FileMake and know it can be done there but without charts. It doesn't make much sense to gather the data in FileMaker and export to Numbers, especially if I want to compare a few groups of dates quickly.
Thank you for any help!

I am not trying to dampen the desire for automation but if I can interject here, this is going to get more complicated. One thing you mentioned in your original post was that you will have a different sheet/table for each year. If you use SUMIFS (as has been the plan until now), the summary table with the start and end dates will need to 1) convert the year of the start/end dates to a table name so it pulls data from the correct table and 2) handle the case of a date range that spans a year (or multi-year) boundary or flag this as non-allowed. Not a problem to do either, just a little more work. The SUMIF solution has these same issues to deal with plus each year's table will need a set of extra columns as Jerry showed. If you have more than one summary report (such as one for Christmas, one for Easter, and one to play with), each report will require its own set of columns in each table. I note that Jerry's formulas in the extra columns cover the issue of multi-year boundaries as long as the summary table does a SUMIF of each of the year tables and sums the results. Again, it can all be done, it'll just be a little more work.
Going back to your original post and the desire to do comparisons of specific things like Christmas seasons of each year rather than what-if analyses that would require a lot of changes to date ranges to find out things like "what happens if Christmas season is defined as starting a day earlier or a day later or...", I am still wondering if it might be easier to select the data manually. Also, the lack of the SUMIFS function is a real limitation if you want more than one summary report in your document.
You know your plans better than I do; maybe automating it is the best idea for the long run. It is your call, I'm just giving my 2 cents based on the limited information I have.

FREE talk, text and data for 12 months for students

This holiday season, only in Best Buy stores, any eligible student* can get 12 months of free talk, text and 1GB data when they buy a qualifying phone and get an Unlimited, My WaySM plan.
To qualify for this offer, phone must be purchased at Student Activated Price. See eligible phones and pricing
This plan includes:
Unlimited talk, text and 1GB of data for smartphones (Reg. $70/mo.), or
Unlimited talk, text and blocked data for basic phones (Reg. $50/mo.)
Easily add unlimited data for just $10/mo.
All lines can enjoy unlimited talk, text and data while on the Sprint network with the Sprint Unlimited Guarantee — not just for now, but for life
Earn bonus months for referrals:
Add a new phone line on the Unlimited, My Way or My All-inSM plan to the same account at Best Buy, and the account gets an additional 12 months of free service for the student lines to share.
Referral line requires 2-yr. service agmt.
$36 activation fee applies per line. Additional data above 1GB: 1.5¢/MB. Other monthly charges apply including up to $2.50 Admin. & .40 Reg. fee per line.**
*Student Line Requirements: Must be an active student enrolled in a U.S.-based elementary, middle school, high school, college, university or accredited institute. Student phone must be purchased at Student Activated Price and activated on an Unlimited, My Way plan, and Account holder must provide proof of student eligibility.
Download the student verification form
or visit: http://www.sprint.com/studentverify
Find a store near you ›
Jesus|Senior Social Media Specialist | Best Buy® Corporate
Private Message

demmo86rt wrote:
Most of those Walmart plans are prepaid, usually don't have the same coverage as postpaid, even from the same carrier, and can come with hidden fees. Not to say they are always a bad deal, but I would make sure you know exactly what you are getting.
Yep none of that will be 4G. Not on any phones that use Verizon's network. Only the Galaxy S 2 on Straight Talk will use "4G" on at&t's network and it's not even LTE is HSPA+. Also the fine print of the "unlimited" data says after 2 GB Straight Talk can throttle you down to 2G speeds and if you continue to use more than 2 GB a month they can cut off your service forever.

Problem loading text master data for one value

Hi guru's,
We are trying to load texts for an standard characteristic (data element : Char 30). The problem comes with characteristic value 4700112703/04/19 , all other values load correct but this one is recognized by SAP as an incorrect value. It seems, by the PSA explanation, that the / is incorrect.
Do you know why this value is incorrect ? Is there any way to load this record to the characteristic ?
Thanks in advance.

Hi,
In RSKC specify the value as ALL_CAPITAL which would allow all the necessary and SAP supported values(including /) to come into BW.
Refer this blog for more information
/people/sap.user72/blog/2006/07/23/invalid-characters-in-sap-bw-3x-myths-and-reality-part-2
Regards,
Rik

How to zero out my data for chart

I am very new to LabVIEW so please be patient.
I am aquiring 12 channels of 0-10 volt signals through a cDAQ-9174 chassis and 9205 module on Labview 11. I am using producer/consumer loops to the write the data to a file also sent to two charts. I want to keep the data sent to the file as is, and then tare (zero out) the data going to the charts.
I have attached the code. Please ignore the diagram dissable structure and it's contents.
Any help would be appreciated,
~Chris
Attachments:
WaveTest_2.8.vi ‏258 KB

Are you supposed to get the this offset each time you press Start, or only the first time? For example, if I press "Start Test A", run it for 5 minutes, and then press it again to stop it, and then 10 minutes later I press it again to start it, do you need to update the offsets, or would you use the ones from 15 minutes earlier? Since the producer consumer loops are running all the time, I would suggest using a shift register/feedback node to keep track of whether you've acquired the offset values. Reset the flag when you turn off the test if you want to get the offsets "fresh" on the next start. As for where to save this, a simple local variable will work (yes, I said local variable, all you local variable haters out there!). In this case you will not run into a race condition.
Note: you do not need to use your own buttons for controlling the visibility of plots. In LabVIEW 2011 that's built-in. Show the plot legend, and then right-click on the legend and select Visible Items -> Plot Visibility Checkbox.
See attached modification for one possible implementation. Note that I removed the enqueing done in the False case in the producer loop since I did not see much point in enqueuing when you didn't actually get any data.
Attachments:
WaveTest_2.8 MOD.vi ‏215 KB

Refresh Hidden Sheet data for Chart

Hello people, I'm trying to expand a hidden sheet data to refresh a chart using these data, (in BPC 10 nw sp 17 patch 2)
The problem is that Data sheet is not refreshed, don't know the reason. Maybe someone can help me.
If I unhide the data sheet, and refresh it using standard refresh buton, it works. But I want to hide data sheet.
I remember doing this with EVDRE in BPC 7 and the procesdure was more or less the same:
Disable events/ screenupdating -> Unhide Data Sheet -> refresh -> Hide Data sheet -> Enable events/ screenupdating
Here is the VBA function I'm using:
   Application.EnableEvents = False
   Application.ScreenUpdating = False
    Dim EPMOB As EPMAddInAutomation
    Set EPMOB = New EPMAddInAutomation
    Sheets("Chart Data").Visible = True
    ActiveWorkbook.Sheets("Chart Data").Select
    EPMOB.RefreshActiveSheet
    Sheets("Chart Data").Visible = False
    Sheets("Chart").Select
    Application.EnableEvents = True
    Application.ScreenUpdating = True
Thanks for your help.

Hi Vadim than, Thanks for your reply, I'm still getting blank results using the macro. but there is data in report.
The problem was that I was calling the refresh chart info from an existing EVDRE report/sheet.
I wanted to use this report because it's the classic menu report with diferent steps and calls.
If i cut/paste the button to the CHART sheet (EPM 10), it's working... strange....
At least I can refresh in the chart sheet, but I cannot call macro from this MENU Evdre sheet.
I'm getting some Clear Cache errors and i have to reconnect to. see again reports... maybe that's because the EVDRE/EPM mixing reports...
thanks

Not able to load text master data for customer infoobject

Hi Guys,
I am not able load master data text to the customer infoobject.
I have a infoobject-A which is loaded with 1000 records, out of which only 100 records are with text and remaining are without text.
I have run a repair full request(extraction from ECC) and
i can see data till PSA(the 100 records which are with text are no more available in ECC now).remaining 900 records are available with text till PSA but not updating to target infoobject.
I have 3.X flow and i have checked transfer rules update rules and tried everythign from side-but no use-still not not working.
Please post your suggestions.
Thanks in advance
Regards,
Siva

Hi Ramanjaneyulu,
Transferrules screen shot:-
update rules
Regards,
Siva

Possible to use Ms Excel data as a dataprovider in Flashbuilder for charting

My dept has an excel spreadsheet with sales data. I'd like to know if anyone has used Excel data for charting in Flashbuilder? Does anyone know of any resources or samples?
Thanks in advance.

Looks like I found my own answer.
Seems that all I need to do was convert my Header data into a 2D array.
Don't know why that one was so tricky to figure out. But it's working now.
Patrick Allen

How to display "No data for yesterday" in a scheduled report on Webi

Hi All,
In Webi, I am working on scheduling reports and was asked by a user if the scheduled report on Webi can display "No data for yesterday/no orders for yesterday" when the report returns no data due to No Orders submitted or a business holiday. This sounded a good idea to me as this report only looks for previous days orders/sales and there are many instances when the report will return blank page due to no activity the day before.
Can anyone please guide me on the possibility of achieving something like this on Webi using Bex query.
Any help will be appreciated .
Thanks
Gaurav

Hi,
You can format the blocks in the report as "Hide When Empty" or "Hide When [some formula]" and have a blank cell added behind these blocks with a text "No Data for Yesterday"
Need to set the relative position and ordering for this accordingly.

Problem in displaying dates for replacement path with text variable

Hi all,
I have to display dates in sequence as descriptions for 15 columns based on the the date entered by the user in Bex Report.I managed to display date as description using text variable with replacement path for single column.I could not able to increment date for other descriptions.Could you please help me to solve this issue.Its urgent.
Ex: User enters 03/09/2007 then in the out put desciptions for the columns should be 03/09 04/09 05/09 ............ 17/09.
Thanks in advance.
Regards,
Mandadi.

Hi,
goto the properties of your KF and click on the variable button side to that of the description field and click on new/Create option.Enter the technical name description for the text variable and select Replacement path as the Processing type and in the nxt screen select Fiscal year as the replacement variable and in nxt screen specify as Key and provide offset values if necessary and click on finish.now select the variable by clickin on the variable button next to the description field.it comes after the description of the KF.Now run the query.
Thanks,
Sandeep

Maintaining Text data for IT0102 in Ad Hoc Query

We use the "Maintain Text" function to store comments and additional data for Grievance information on IT0102. I need these comments to be included in a query for IT0102, however I only see the indicator for if text exists...there's no "field" to select to show the actual text - mainly because it's a note and not a field.
Any suggestions???

Hi,
you could make a custom field in your infoset for infotyp 0012. Then you could append code to this field and read the text with function module
HR_ECM_READ_TEXT_INFOTYPE into this field.
Regards Bernd

Text ids for Chart of Accounts & Co Code Area

Hi,
Why do we need obt6 & obt7 i.e. Text ids for Chart of Accounts & Co Code Area.
Regards,
Vikas

in case when u want to use some additional text for the creation of GL at a crertain level like COA then u create the standard text types and tick the relevant text... then whenever u create the GL then it will give u the option of putting text there..... it is more of information text....

Text data for condition type & customer po number

Will there be any text datsrc available for condition type & customer po number
Example I am displaying condition type data & customer po number data in my report
condition typ    customer po nu
JASS                        1001
JEEP                         121

Hi,
goto Tx LBWE, application 11, maintain extract structure MC11VA0HR.
Check if your field is on the right side, you should find at least the following
MCVBAK CMFRE release date
MCVBAK KTEXT Description
if they're on the right pane, then you'll have to include them for extraction; depending on if the delta is already initialez or not, if you want past history as well, the procedure might be more less complicated.
regards
Olivier.

Little help with complex XML data as data provider for chart and adg

Hi all,
I've been trying to think through a problem and Im hoping for
a little help. Here's the scenario:
I have complex nested XML data that is wrapped by subsequent
groupings for efficiency, but I need to determine if each inner
item belongs in the data collection for view in a data grid and
charts.
I've posted an example at the bottom.
So the goal here is to first be able to select a single
inspector and then chart out their reports. I can get the data to
filter from the XMLListCollection using a filter on the first layer
(ie the name of the inspector) but then can't get a filter to go
deeper into the structure in order to determine if the individual
item should be contained inside the collection. In other words, I
want to filter by inspector, then time and then tag name in order
to be able to use this data as the basis for individual series
inside my advanced data grid and column chart.
I've made it work with creating a new collection and then
looping through each time there is a change to the original
collection and updating the new collection, but that just feels so
bloated and inefficient. The user is going to have some buttons to
allow them to change their view. I'm wondering if there is a
cleaner way to approach this? I even tried chaining filter
functions together, but that didn't work cause the collection is
reset whenever the .refresh() is called.
If anyone has experience in efficiently dealing with complex
XML for charting purposes and tabular display purposes, I would
greatly appreciate your assistance. I know I can get this to work
with a bunch of overhead, but I'm seeking something elegant.
Thank you.

Hi,
Please use the code similar to below:
SELECT * FROM DO_NOT_LOAD INTO TABLE IT_DO_NOT_LOAD.
SORT IT_DO_NOT_LOAD by WBS_Key.
    IF SOURCE_PACKAGE IS NOT INITIAL.
      IT_SOURCE_PACKAGE[] = SOURCE_PACKAGE[].
LOOP AT IT_SOURCE_PACKAGE INTO WA_SOURCE_PACKAGE.
        V_SYTABIX = SY-TABIX.
        READ TABLE IT_DO_NOT_LOAD into WA_DO_NOT_LOAD
        WITH KEY WBS_Key = WA_SOURCE_PACKAGE-WBS_Key
        BINARY SEARCH.
        IF SY-SUBRC = 0.
          IF ( WA_DO_NOT_LOAD-WBS_EXT = 'A' or WA_DO_NOT_LOAD-WBS_EXT = 'B' )
          DELETE IT_SOURCE_PACKAGE INDEX V_SYTABIX.
        ENDIF.
ENDIF.
      ENDLOOP.
      SOURCE_PACKAGE[] = IT_SOURCE_PACKAGE[].
    ENDIF.
-Vikram

Text als data for charts

Similar Messages

Maybe you are looking for