Text delimiter problem
I am creating a .csv file from the following data:
<Record>
<field1>Bearing</field1>
<field2>3.2" height, 2.1" weight</field2>
</Record>
Instead of two columns, this creates 3 columns due to the comma in the text of field2.
If I include a mapping to enclose in quotes (") and include a content conversion parameter ( Record.enclosureSign = " ), because there is " in the text, this still splits the text into multiple columns.
How to handle this so that any text in field2 (regardless of special characters) goes entirely into second column of output .csv file?
Hi James,
It will split in three fields as you are using the comma as fieldSeperator and in your output there will be comma between the text of Field2 thus even if its in reality single field, It will look like having the three fields.
Probably you need to handle it while the file is getting read on the receiver end by further application.
OR better way will be to use the field seperator charset which will not be usedin the Output payload.
The characters such as @, #, $ etc but have to make sure that these chars will not be repeated in the Output payload values
Thanks
swarup
Similar Messages
-
I'm having the text field problem. I have two text boxes (inside my .fla file) one i can add more text without the box expanding and can then select the text and croll down to view the missing text and the other one just gets longer the more text I add. I'm trying to duplicate the text box that does not expand the more text I add to it.
All the settings in the properties are the same on both and I've tried it in MX and CS3 and the both have the same properties in both.
I'm stumped can anyone help.
I'm attaching the file.
Thanks!If you right click the textfield on the stage you can select the "scrollable" option for it. Another option to duplicate the textfield is to copy/paste it.
-
Question on the known solution to the "Three pixel text jog" problem
Hello,
I'm "browser-checking" my website using Dreamweaver CS4 tool for that. I've got in various places the "three pixel text jog" IE problem. I followed the link to solution proposed by DW. It says I should add an IE conditional statement in the <head> part, so that I can define the CSS zoom property for that particular element. Hence, something like that:
<!--[if IE]>
<style type="text/css">
#Content p { zoom: 1; } /* three pixel text jog IE bug */
</style>
<![endif]-->
(assuming the problem occurs for a <p> inside my #Content div.)
My question is: can I replace this by
<!--[if IE]>
<style type="text/css">
#Content * { zoom: 1; } /* three pixel text jog IE bug */
</style>
<![endif]-->
For another browser problem (prevent the browsers from using some of their own default settings), it was advised to reset the margin, padding and border properties using:
border: 0;
margin: 0;
padding: 0;
(although in my case I had to later remove border: 0; because it would prevent default buttons of forms to be displayed as buttons.)
Does this * really mean "anything"? Is it valid as used above for fixing the three pixel text jog problem? If not, do I really have to define this zoom property for any single HTML element for which it occurs? (It currently occurs for some headers, <div>, "<div> <div>" sequence, some <p>.)
Any comment welcome...
Emilie
P.S.: I tried it and DW doesn't flag that problem any more, but I'm unsure how much I can trust it.The behavior is unexpected. The file paths are
correct? -
We bought an iphone 4s for our daughter. We transfered it to straight talk. She can make calls and text no problem. She can use the WiFi but is unable to use the internet or mms. How do we update the APN?
To clarify for anyone who is still having any problems doing this.
1. Unlock your phone with the carrier ( I know the process will work if it is jail broken but I am assuming you dont want to void the warranty on your phone) NOTE: even if you purchased the phone outright at Wal-Mart it is still locked to ATT so you will have to unlock the phone. If it's already unlocked skip to step 2. This works and will work even if you update the phone.
1a Here is the link to unlock a ATT iphone. Simply follow the instructions https://www.att.com/deviceunlock/client/en_US/
2. Get a T- mobile SIM. Even if you don't want the service, if you feign interest, they will send you one for free or 99cents. If you need it now you can get one at a T-mobile store too.
3. Once you have both your Straight talk SIM and your T-mobile SIM follow these instructions:http://www.youtube.com/watch?v=mFFf5uqk18M
4. If you have any remaining questions look at all the responses posted previously on this thread or check out the Howard Forums Wiki: http://wiki.howardforums.com/index.php/Straight_Talk_iPhone
Everything should work flawlessly at this point. If not let me know and I'm happy to help when I can. I hope this makes doing this very easy for everyone in the future. God Bless -J -
I have a acrobat reader, can I import text delimited data format to a PDF Form so that it can auto fill into forms that was created? If not, what about FDF and XML data
Yes, you can do all of that via Tools - Forms - More Form Options - Import Data, if you have Acrobat.
If you only have the free Reader then you can still do it, but it requires a script. -
Font / text edit problem in photoshop CS6
Hi there,
I have a strange text edit problem in Photoshop CS6 running on Mavericks.
Every time I use the text-tool in PS, write a sentence, mark it and change something like color, font size etc., the marked text vanishes.
I have to "undo" the last step and the changed text appears again.
Every time!
I have a clean installed CS6 with no plugins and no other than system fonts installed.
Everything on a new Mac Pro with OS X 10.9.5
Any clues? Thanks.Do you have the latest updates for photoshop cs6?
You can use Help>Updates from within photoshop cs6 to check if there are any available.
Also, if you go to Help>System Info from within photoshop cs6, you can see the Photoshop Version in the top line.
You should be on version 13.0.6
See if turning off Dictation solves the issue.
Go to System Preferences ---> Dictation and Speech -----> select OFF radio button . -
could someone please provide a sample code of how to upload a text "|" delimited file into SAP internal structure? i used GUI_upload with field_separator but didn't work. many thanks.
HI Voo,
i think this is the FM you are looking for..
see the sample functionality ..
DATA: BEGIN OF itab OCCURS 0,
vbeln LIKE vbak-vbeln,
ernam LIKE vbak-ernam,
END OF itab.
DATA itab2 LIKE TABLE OF KCDE_CELLS WITH HEADER LINE.
CALL FUNCTION 'KCD_CSV_FILE_TO_INTERN_CONVERT'
EXPORTING
i_filename = 'D:dataupl.txt'
i_separator = '|'
tables
e_intern = itab2
* EXCEPTIONS
* UPLOAD_CSV = 1
* UPLOAD_FILETYPE = 2
* OTHERS = 3
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT itab2.
SPLIT itab2-value AT '|' INTO itab-vbeln itab-ernam.
APPEND itab.
CLEAR itab.
ENDLOOP.
And the file: upl.txt
12345|text
12346|text2
12347|text3
regards
satesh -
N96 text sending problem pls help!
Hi, i have a nokia N96, on friday it just stopped sending my texts,
the problem started as i was texting my friend as normal, then she replied saying she had got the same msg 8 times! since then all my texts have got stuck in my outbox!
whats going on?
I have backed up my contacts incase i need to restore the phone but i want to avoid doing that if possible as i dont want to loose my photos and music (unless someone can tell me how to back those up too!)
Can anyone offer any advise, other than chuck it accross the room?!
Oh and also, i have 2 multimedia msg in my inbox that wont delete! could this be causing the problem? When i try to delete it says "already in use" where? i cant find them!
thanks
xXx
Kudos! Thanks!
Edit Post Subscribe to This Topic's RSS Feed Highlight This Post Print This Post E-Mail this Post to a Friend Report Abuse to a Moderator
OptionsI have had a similar problem on my 5700, started out the same, people saying my text was coming trhough 3 or 4 times, then it stopped sending. I checked the message centre phone number with my provider, which was correct, and then it would not let me into the the message centre to even edit the number?? I have tried a factory reset and a firmware update. Does anyone else have any ideas??
-
Since I upgraded to 10.4.10, I dont know if I did something wrong but I have bad text overlapping problems in Safari and some other apps such as Software Update, I first noticed the overlapping when editing a Wikipedia article and in the text box the text kept overlapping. Another site where it is very noticeable is in Facebook, here's a screenshot:
Even on this site it's pretty bad. It's the worst in text-boxes like in the one I'm typing in right now.
This is driving me crazy, anyone else have this problem or know how to fix it? Thanks.
Message was edited by: Johnny K.Ok, Johnny --
I hated to ask cause it's "Old School."
If you shut down your Mac every night,
you should have something on your Mac that will run cron scripts,
and do other helpful things for you.
I personally use YASU.
I run it about 1x month.
It's free or donation-ware
it's written just for Macs
and is excellent.
Here's where to go for more info on it:
http://jimmitchell.org/projects/yasu/
The new Macs were built to stay on 24/7.
When you shut them off at night, you stop the regular
maintenance it already has scheduled. YASU (or similar apps)
will take care of everything for you. -
HI Experts,
I have a problem.
I have uploaded the file in csv format using Open dataset.
But they want in csv tab delimited format. I really dont understand how to do in this format.
I know only csv (the file will be separated by ',') and if tab delimited means ( file separated by '#').
How to achieve the csv tab delimited format.
Also, in file, if the field contains - no value, it comes as space. But that space while concatenating, it is not added. How to acheive a space while concatenating the fields.
Awaiting for your replies.
Thans in Advance,
Regards,
Sakthi Sri.hi,
DATA : FILENAME(128) DEFAULT '/usr/......../file.csv'. "" Your path in app server
DATA : lv_str type string.
data: l_seperator TYPE c.
CLASS cl_abap_char_utilities DEFINITION LOAD.
l_seperator = cl_abap_char_utilities=>horizontal_tab.
OPEN DATASET FILENAME FOR OUTPUT IN TEXT MODE.
CHECK sy-subrc EQ 0.
loop at i_item.
CONCATENATE
i_item-FIELD_1
i_item-FIELD_2
i_item-FIELD_3
i_item-FIELD_4
i_item-FIELD_5
into lv_str
SEPARATED BY l_separator.
transfer lv_str to filename.
endloop.
* Close File
CLOSE DATASET FILENAME.
regards,
Siva Prasad -
Photoshop CC text tool problem! Please HELP!
Everytime i try to use the text tool on photoshop CC it turn my picture black and keep flashing on and off.! Can someone please help me solve this problem? ( Please excuse my english, I'm still learning ^^")
Windows 8? Update your video card driver from the GPU maker's website.
-
Cross-Reference using Text Anchor problems
I am having problems with creating "New Cross-Reference" using a "Text Anchor" in CS4 Indesign.
I can mimic what I want using a "Link to Paragraph", selecting the paragraph style and link, and then using the "Partial paragraph and Page Number" options.
I would prefer doing this using a Text Anchor.
I've tried creating a text hyperlink, but in whatever I am doing, I never get any "Text Anchor" OPTIONS in the New Cross-Reference menu.
Adobe should also change the Text Anchor menu item, since there are "Text Anchor" options in InDesign that appear to have nothing to do with Cross-Referencing.
The other problem I am having is that in defining the open-quote and closed-quotes around the Paragraph Text variable, I wish to have typesetter's quotes instead of the default vertical quotes. If I use the Splat button to choose ^{^} options, then I get funky "G"'s in my reference instead of typesetters quotes -- even if I choose a "Character Sytle for Cross Reference" and force it to my current font choice. What's going on here?
SCHi, Seir:
I agree that it's confusing. Here's how I do it:
To create a text anchor at the insertion point location:
* Open the Hyperlinks/Cross-References panel's menu (also called "flyout menu." It's the small icon at the upper-right of the panel, below the double-arrow (>>) icon that collapses the panel.
* Choose New Hyperlink Destination. THIS SHOULD BE NAMED NEW TEXT ANCHOR!!!
* Choose Type: Text Anchor
* Name the anchor as you like Click OK.
To create a cross-reference to a text anchor:
* Place the insertion point where you want it.
* Click the Create new Cross-Reference button on the bottom of the Hyperlinks/Cross-Reference panel.
* Choose Link To: Text Anchor
* Choose the target document
* Choose the text anchor
* Choose the Cross-Reference format
* Choose Appearance properties
* Click OK
I'm not sure what could cause the straight/curly quotes problem other than perhaps the font doesn't have curly quotes. Have you tried other fonts?
HTH
Regards,
Peter Gold
KnowHow ProServices -
Table Control Text fields problem , help plz
Hello Anand , Rich , John & All
I hav problem with Text 3 fields( type c)(either L or R aligned ) , it is not geting updated , otherwise everything else is perfectly fine(scrolling,sorting etc ....) .
Fields giving problem are
1. Status(20) type c
2. Fdat type date
3. Remark(100) type c
All numerical fields are working fine .
<u><b> My yahoo messenger-id is [email protected]</b></u>
<b>Any light on this will be awarded plz .</b>
FLOW LOGIC
PROCESS BEFORE OUTPUT.
MODULE SET_STATUS.
LOOP AT ITAB
WITH CONTROL TCL1
CURSOR TCL1-CURRENT_LINE .
MODULE SET_LINE_COUNT .
ENDLOOP.
PROCESS AFTER INPUT.
MODULE UPD_OK_COD.
MODULE EXIT_COMAND AT EXIT-COMMAND.
MODULE SCROLL_SORT.
LOOP AT ITAB.
MODULE UPDATE_ITAB.
ENDLOOP.
MODULE UPDATE_TABLE.
REPORT ZSD_REP_ORDER_BANK_CHANGE NO STANDARD PAGE HEADING LINE-SIZE 255.
TABLES: VBAK,VBAP,VBRK,ZSD_TABL_ORDBANK,MARA,KONV.
CONTROLS: TCL1 TYPE TABLEVIEW USING SCREEN 0200.
DATA: ITAB LIKE ZSD_TABL_ORDBANK OCCURS 0 WITH HEADER LINE,
WA_ITAB LIKE ZSD_TABL_ORDBANK,
OK_CODE LIKE SY-UCOMM,
SAVE_OK_CODE LIKE SY-UCOMM,
UPD_OK_CODE LIKE SY-UCOMM,
ANSWER TYPE C,
I LIKE SY-LOOPC ,
J LIKE SY-LOOPC,
V_LINES LIKE SY-LOOPC,
LINE_COUNT LIKE SY-LOOPC,
STS TYPE N,
EMGRP LIKE MARA-EXTWG,
QTY LIKE ZSD_TABL_ORDBANK-QTY,
UPRICE LIKE ZSD_TABL_ORDBANK-UPRICE,
TOT LIKE ZSD_TABL_ORDBANK-TOT,
INO LIKE VBAP-POSNR,
COL TYPE CXTAB_COLUMN,
COPIED_ONCE ,
FLDNAME(100),HELP(100).
FIELD-SYMBOLS:
<FS_ITAB> LIKE LINE OF ITAB,
<FS_TCL1> LIKE LINE OF TCL1-COLS.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-000.
SELECT-OPTIONS: S_CCODE FOR ZSD_TABL_ORDBANK-CCODE
NO INTERVALS NO-EXTENSION OBLIGATORY,
S_SORG FOR ZSD_TABL_ORDBANK-SORG
NO INTERVALS NO-EXTENSION OBLIGATORY,
S_DCHAN FOR ZSD_TABL_ORDBANK-DISTCHAN,
S_DIV FOR ZSD_TABL_ORDBANK-DIV,
S_MATNO FOR ZSD_TABL_ORDBANK-MATNO,
S_CUSTNO FOR ZSD_TABL_ORDBANK-CUSTNO ,
S_QTNO FOR ZSD_TABL_ORDBANK-QTNO,
S_QTDAT FOR ZSD_TABL_ORDBANK-QTDAT,
S_QTVDAT FOR ZSD_TABL_ORDBANK-QTVALDAT,
S_SONO FOR ZSD_TABL_ORDBANK-SONO.
SELECTION-SCREEN END OF BLOCK b1.
AT SELECTION-SCREEN.
SELECT * FROM ZSD_TABL_ORDBANK
INTO TABLE ITAB
WHERE CCODE IN S_CCODE
AND SORG IN S_SORG
AND DISTCHAN IN S_DCHAN
AND DIV IN S_DIV
AND MATNO IN S_MATNO
AND CUSTNO IN S_CUSTNO
AND QTNO IN S_QTNO
AND QTDAT IN S_QTDAT
AND QTVALDAT IN S_QTVDAT
AND SONO IN S_SONO .
IF SY-SUBRC EQ 0.
REFRESH ITAB.
CLEAR COPIED_ONCE.
CALL SCREEN 0200.
ELSE.
MESSAGE E012(ZQOTBANK) .
ENDIF.
*& Module SET_STATUS OUTPUT
* text
MODULE SET_STATUS OUTPUT.
SET PF-STATUS '0200'.
SET TITLEBAR '0200'.
IF COPIED_ONCE IS INITIAL.
SELECT * FROM ZSD_TABL_ORDBANK
INTO TABLE ITAB
WHERE CCODE IN S_CCODE
AND SORG IN S_SORG
AND DISTCHAN IN S_DCHAN
AND DIV IN S_DIV
AND MATNO IN S_MATNO
AND CUSTNO IN S_CUSTNO
AND QTNO IN S_QTNO
AND QTDAT IN S_QTDAT
AND QTVALDAT IN S_QTVDAT
AND SONO IN S_SONO .
IF SY-SUBRC EQ 0.
DESCRIBE TABLE ITAB LINES V_LINES.
TCL1-LINES = V_LINES.
ENDIF.
COPIED_ONCE = 'X'.
REFRESH CONTROL 'TCL1' FROM SCREEN '0200'.
ENDIF.
LOOP AT ITAB.
QTY = ITAB-QTY.
UPRICE = ITAB-UPRICE.
TOT = QTY * UPRICE .
ITAB-TOT = TOT .
CLEAR: QTY, UPRICE, TOT.
QTY = ITAB-CGL_QTY.
UPRICE = ITAB-CGL_UPRICE.
TOT = QTY * UPRICE .
ITAB-CGL_TOT = TOT .
CLEAR: QTY, UPRICE, TOT.
QTY = ITAB-BHEL_QTY.
UPRICE = ITAB-BHEL_UPRICE.
TOT = QTY * UPRICE .
ITAB-BHEL_TOT = TOT .
CLEAR: QTY, UPRICE, TOT.
QTY = ITAB-ALSTOM_QTY.
UPRICE = ITAB-ALSTOM_UPRICE.
TOT = QTY * UPRICE .
ITAB-ALSTOM_TOT = TOT .
CLEAR: QTY, UPRICE, TOT.
QTY = ITAB-SIEMENS_QTY.
UPRICE = ITAB-SIEMENS_UPRICE.
TOT = QTY * UPRICE .
ITAB-SIEMENS_TOT = TOT .
CLEAR: QTY, UPRICE, TOT.
QTY = ITAB-TELK_QTY.
UPRICE = ITAB-TELK_UPRICE.
TOT = QTY * UPRICE .
ITAB-TELK_TOT = TOT .
CLEAR: QTY, UPRICE, TOT.
QTY = ITAB-OTH_QTY.
UPRICE = ITAB-OTH_UPRICE.
TOT = QTY * UPRICE .
ITAB-OTH_TOT = TOT .
CLEAR: QTY, UPRICE, TOT.
MODIFY ITAB.
ENDLOOP.
ENDMODULE. " SET_STATUS OUTPUT
*& Module SET_LINE_COUNT INPUT
* text
MODULE SET_LINE_COUNT OUTPUT.
LINE_COUNT = SY-LOOPC.
ENDMODULE. " SET_LINE_COUNT INPUT
*& Module UPD_OK_CODE INPUT
* text
MODULE UPD_OK_COD INPUT.
IF OK_CODE = 'SAVE'.
UPD_OK_CODE = OK_CODE.
* CLEAR OK_CODE.
ENDIF.
ENDMODULE. " UPD_OK_CODE INPUT
*& Module EXIT_COMAND INPUT
* text
MODULE EXIT_COMAND INPUT.
SAVE_OK_CODE = OK_CODE.
CLEAR OK_CODE.
CASE SAVE_OK_CODE.
WHEN 'BACK'.
CALL FUNCTION 'POPUP_TO_CONFIRM'
EXPORTING
TITLEBAR = 'Order Bank Entry'
TEXT_QUESTION = 'Do you want to Go BacK ?'
TEXT_BUTTON_1 = 'Yes'
TEXT_BUTTON_2 = 'No'
DEFAULT_BUTTON = '2'
IMPORTING
ANSWER = ANSWER.
IF ANSWER = '1'.
LEAVE TO SCREEN 0.
ELSE.
ENDIF.
WHEN '%EX'.
CALL FUNCTION 'POPUP_TO_CONFIRM'
EXPORTING
TITLEBAR = 'Order Bank Entry'
TEXT_QUESTION = 'Do you want to Exit ?'
TEXT_BUTTON_1 = 'Yes'
TEXT_BUTTON_2 = 'No'
DEFAULT_BUTTON = '2'
IMPORTING
ANSWER = ANSWER.
IF ANSWER = '1'.
LEAVE TO SCREEN 0.
ELSE.
ENDIF.
ENDCASE.
ENDMODULE. " EXIT_COMAND INPUT
*& Module UPDATE_MOD INPUT
* text
MODULE UPDATE_ITAB INPUT.
MODIFY TABLE ITAB FROM ITAB.
ENDMODULE. " UPDATE_MOD INPUT
*& Module SCROLL INPUT
* text
MODULE SCROLL_SORT INPUT.
SAVE_OK_CODE = OK_CODE.
CLEAR OK_CODE.
CASE SAVE_OK_CODE.
WHEN 'P--'.
TCL1-TOP_LINE = 1.
WHEN 'P-'.
TCL1-TOP_LINE = TCL1-TOP_LINE - LINE_COUNT.
IF TCL1-TOP_LINE LE 0.
TCL1-TOP_LINE = 1.
ENDIF.
WHEN 'P+'.
I = TCL1-TOP_LINE + LINE_COUNT.
J = TCL1-LINES - LINE_COUNT + 1.
IF J LE 0.
J = 1.
ENDIF.
IF I LE J.
TCL1-TOP_LINE = I.
ELSE.
TCL1-TOP_LINE = J.
ENDIF.
WHEN 'P++'.
TCL1-TOP_LINE = TCL1-LINES - LINE_COUNT + 1.
IF TCL1-TOP_LINE LE 0.
TCL1-TOP_LINE = 1.
ENDIF.
WHEN 'SORTUP'.
READ TABLE TCL1-COLS ASSIGNING <FS_TCL1> WITH KEY SELECTED = 'X'.
IF SY-SUBRC = 0.
SPLIT <FS_TCL1>-SCREEN-NAME AT '-' INTO HELP FLDNAME.
SORT ITAB ASCENDING BY (FLDNAME).
ENDIF.
WHEN 'SORTDN'.
READ TABLE TCL1-COLS ASSIGNING <FS_TCL1> WITH KEY SELECTED = 'X'.
IF SY-SUBRC = 0.
SPLIT <FS_TCL1>-SCREEN-NAME AT '-' INTO HELP FLDNAME.
SORT ITAB DESCENDING BY (FLDNAME).
ENDIF.
ENDCASE.
ENDMODULE. " USER_COMMAND INPUT
*& Module TABL_UPD INPUT
* text
MODULE UPDATE_TABLE INPUT.
CASE UPD_OK_CODE.
WHEN 'SAVE'.
UPDATE ZSD_TABL_ORDBANK FROM TABLE ITAB .
IF SY-SUBRC EQ 0.
MESSAGE I002(ZQOTBANK) .
CLEAR UPD_OK_CODE.
ELSE.
MESSAGE E003(ZQOTBANK) .
ENDIF.
ENDCASE.
ENDMODULE. " TABL_UPD INPUT
Thnx
moni<b></b><b></b>
Message was edited by: md monirujjaman
Message was edited by: md monirujjamanHi Moni,
The problem as I had replied in your earlier post is with the MODIFY statement.
MODIFY TABLE ITAB FROM ITAB. This statement will do the modifications based on the table key. When you have character fields as editable, then some problems are to be anticipated. In such a scenario, you must update the internal table based on the <i>index</i>, rather than based on <i>key</i>.
So consider using
MODIFY ITAB FROM ITAB INDEX TCL-CURRENT_LINE.
Where TCL is the name of the Table Control. Also observe the difference in syntax here, don't use the TABLE keyword for the MODIFY statement.
Please try it out and let me know.
Regards,
Anand Mandalika. -
Text-wrap problem ID CS3 on Intel Mac
I've recently been upgraded to an Intel Mac workstation running Leopard and for the most part, the transition has been smooth. However, I just noticed today that I cannot get "detect edges" to work on a text wrap around an object with a transparent background in a placed Photoshop file. The detect edges only works if I have a white background. I've never had this problem before, so I wonder if it's a result of my new computer. I use this function of text wrap constantly, and I'm hoping someone knows if this is a known bug and if there is a work around.
You don´t have to use detect edges feature for extracted PSD-image.... just select a proper Contour Options Type, Alpha Channel for instance.
-
Text message problem after 10.2.1 update
I updated to 10.2.1 and I now receive no visual or sound notification for my text messages, they also only appear in the main hub not in the separate account for text messages it just says no entries in this view, can someone pleaseee help its driving me crazy, I've done a battery pull numerous times even disabled Facebook and Twitter notifications as I've seen in another post but nothings working,i really need help as I have no idea when I receive a text unless I go into the hub
I found this on Crackberry.com I haven't been able to try yet as I have a loaner Q10 right now. My keyboard is being repaired. Let me know if this works for you.
See below
This is a solution from the Blackberry support forum:
Believe it or Not i found a simple solution to this problem...
First I did a factory reset on my cell to start from scratch with no contacts and etc... I then ask multiple friends to send me text messages (SMS) to see if i would get them. For hours, all my text message notifications were working fine. Next step, i setup my email accounts accounts...and once again all my notifications were still working fine.
Next i logged into my facebook account and that's when all of a sudden after a few minutes. NO MORE NOTIFICATIONS. No text msg, no emails, no fbook notifications. The default FACEBOOK APP was the problem. I simply deleted the default FACEBOOK APP by tapping and holding the icon for 5 secs... and tap the top right corner of the garbage can and clicked YES to delete. Rebooted my cell and then went on Blackberry World to download the latest FACEBOOK APP and logged into my account. Ever since i did this all my notifications have been working fine. It's only been 24hrs but still it's a major step. I will continue to monitor the situation but my suggestion to you guys... FIRST THINGS FIRST is to delete the default FACEBOOK APP.... and before you re-download it reboot your cell and wait for a little while to see if you're getting your notifications.... then go ahead and re-download the Facebook APP from Blackberry World everything should be fine.
Maybe you are looking for
-
Hi all Just discovered an interesting and potentially dangerous bug in TM running 10.7.4 (like many others I've downgraded from 10.7.5 because of the Spotlight/TM problems noted in this forum). Here's the bug: You set up TM and specify certain items
-
Quick look, videos and relaunching Finder
After updating to Snow Leopard, I noticed one item right away: My scroll wheel no longer shuttled through the videos in quick look like it did before. Is there a fix, or reason for this? Also, and more recently, I find myself having to relaunch the F
-
Can you open in Pages documents that were created in a 2004 version of Microsoft Word for Mac?
-
hi I want to add this code to change ONLY the JMS_IBM_Last_Msg_In_Group JMS Parameter any way to do it with EJB after all the messages are sent with the adapter? Thx,Shai MQConnectionFactory factory = new MQConnectionFactory(); factory.setQueueManag
-
AS3 to JS conversion: future and preparation
Hey guys!! So, new job here and big responsabilities. I have a HUGE project in my hands and my mission is to implement it with Flash and AS3 but later on I'll need to migrate ALL OF IT to HTML5 + JS. Well, I know there are things like the EasyJS and