Text Field value display twice in Adobe Form.

Hi Experts,
I want to display a text field value twice in a ADOBE FORM but it only display at first occurance of the text field.
Please suggest me possible solution.
Regards,
Abdul

Why don't you have two different text fields in the interface and bind them separately at the two different places in the form. In the driver program you can control the value being passed to be same for both the fields.
Regards
Ranganath

Similar Messages

Text field data in the Interactive adobe form to long text

Hi Expert,
I have a text field(allow multiple line) in the interactive adobe form which has been binded to table type(char132) field of the context element.
Now I want the save text field data as a long text using SAVE_TEXT.
When I enter some value in the text field and trigger SUBMIT event then it is going to dump.
I am unable to trace out what is wrong, since control is not reaching to INIT method of the view.
please help.
Regards,
Rajesh.

Hi,
what is in ST22 for this problem?
Regards Jiri

Fill DDL based on other field values in offline interactive adobe form

Hi,
I have a requirement where in i need to fill the values for a dropdown list based on 3 other field values in offline adobe interactive forms which uses web service to interact with SAP.
Note: I read many blogs and posts in SDN , but couldn get much info ab the same, so posting a new thread.
Thank you.
Regards,
Soumya

Hi Soumya,
It is possible but a little bit tough and will make your form heavier.
The solution is advisable only when there is not very much data required for the drop down(May be not more than 500 values as it will create performance issue).
You can create a hidden table on the form contaning data for all the combinations. Depending on the selection of another 3 fields you can write the code to select only those values from this hidden table which are applicable to that selection. These values you can add to the drop down list removing the previous values.
Only you have to do is on calculate or vlaidate event of target DDL you have to write your code.
Pseudocode:
1. Clear your DDL using deleteItem() method.
2. Loop at your hidden table.
3. Inside the loop check for applicable entries depending on selection in other 3 fields.
4. Select the appropriate vlaues
5. Add using additem method().
Refer formCalc or JavaScript help for the appropriate code.
Hope this will be helpfull.
Regards,
Vaibhav

How to Add/Concatenate to a text field, values selected in a combo box

I have a combo box form field that allows the user to select a value from a list and click on an Add button. The Add button should add/concatenate the vaue selected to a text field in order to create a list of values selected. I'm not sure how to do this using Javascript in Acrobat? I know I need to add the javascript to the Add button's Mouse Up action. Any help would be greatly appreciated. Thanks!

Thanks so much - it works!
>>> "Gilad D (try67)" <[email protected]> 9/25/2013 9:16 AM >>>
Re: How to Add/Concatenate to a text field, values selected in a combo box created by Gilad D (try67) ( http://forums.adobe.com/people/try67 ) in JavaScript - View the full discussion ( http://forums.adobe.com/message/5712118#5712118 )
Let's say the text field's name is "Text1", and the combo is called "Combo1". You can then use this code as the MouseUp script of the Add button:
var f1 = this.getField("Text1");
var f2 = this.getField("Combo1");
if (f1.value=="") f1.value = f2.value;
else f1.value = f1.value + ", " + f2.value;
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5712118#5712118
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5712118#5712118
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5712118#5712118. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in JavaScript by email ( mailto:[email protected].com ) or at Adobe Community ( http://forums.adobe.com/choose-container!input.jspa?contentType=1&containerType=14&contain er=3286 )
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Problem with text formatting within a table in Adobe Forms

Hi all,
I have a table on a non-interactive Adobe form (which is a copy of the standard expense form PTRV_EXPENSE_FORM. The table in ABAP has a text field with CHAR50. On the form, the text field has a width which allows approximately 35 characters. Therefore the text wraps onto a second line. My problem is that the text is not formatted and words are just split randomly.
For example:
The fox ran across the fields and into the woods.
would be output as:
The fox ran across the fields and i
nto the woods.
How can the text be formatted to only output complete words?
I have tried defining the textfield as text only and rich text, but nothing changes the output.
Interestingly, even if I change the font size from say 10 to 8, the text is output the same, even though there is enough space for at least one more word on the first line.
Has anyone else come across this problem?
Thanks,
Patricia

Hi Syed
The table is IT_RECEIPTS_ADD_INFO, field VALUE_CHAR. In the form it is called Receipts_addl_info.
I have just found out that the data is being re-formatted in the interface. That caused the problem. Many, many thanks for your help.
Best regards
Patricia

Making short text field in Display mode for one particular Purchasing

Hi All,
This is regarding Making the Short text field in Display mode of PR for one Particular Purchasing.. i am giving you a bit elaborate...We are into E-Catalog Procurement.I will do the shopping from the Vendors external catalog and i will return back to SAP.
While doing so, i dont want the user to change the Short Text field. I want that field shud display the Description. When i tried with the Screen Layout settings, it is fully grayed out and i am not able to see the Description of the Material. Is there any other options to get this enabled?. Please advice me on this settings to be done. Thanks in Advance.
With Regards,
Saakithyan

Hi
Define a Field selection key (new not the one which is assigned to document type) which makes short text editable in screen layout config. and assign it to functional authorization value in t.code OMET. (it should be numeric). Then assign that functional authorization value in user master SU01 for users with parameter id EFB.
Then it will work
Regards
Antony

Want to hide the drop down based on text field value

Hi,
I want to hide some of the values in drop down based on one text field value.
I have the field called name which has the value A, B, C, D and also one drop down list which has the values 1,2,3,4,5,6. I want to hide the some of the values in drop down based on A or B or C. Let say, If it is A, drop down value should be 1,3,5. If it is B, Drop down value should be 1,2,3,4. Like this for every record.
Can you please help me out.
Thanks
Ram

Hi Robert,
I am trying it in two different way. Please suggest which is the right one and feasible.
1) I have the drop down list which has all the status. I am trying to hide the drop down values based on one text field value for all records.
2) I have collected all the drop down values into table in webdynpro method. Rightnow I have two tables.
one has line items details and another one have drop down values. both tables having common fields.
I have to show second table values for that particular key, move all of them to drop down.
Which is the best and feasible option.
Thanks
Ram

G/L Account Long Text Field in Display

Dear Sir,
I want G/L Account long text field be displayed along with G/L account number in G/L Account line item display report (FBL3N)
I cheched the layout, the option of G/L account number is available but option of G/L account Long text is not available.
Kindly guide me as to how can I do it?
Regards
Chirag Shah

You must do some development for it.
You can add additional field to FBL*N reports with using BTE exit.
First of all, if you don't use BTE before, you must create a product on FIBF.
Call FIBF transaction -> Settings -> Products -> ...of a customer
Create a new line,
Product: ZFI
Text: BTE Products for FI Exit
Product active: tick checks from activation.
Then you must call SE11 for structure RFPOS.
You must use append structure function for this structure and you can define ZFI_RFPOS append structure
Define 4 fields.
Component: KUNNR - Component type: KUNNR
Component: NAMED - Component type: NAME1
Component: LIFNR - Component type: LINFR
Component: NAMEK - Component type: NAME1
Then save and active your RFPOS structure.
After that, you must do same step for structure RFPOSX.
Then go to SE37 and copy from SAMPLE_INTERFACE_00001650 to ZFI_INTERFACE_00001650 FM.
After copy action, you must uncomment this line on ZFI_INTERFACE_00001650 FM's source code. It's very important;
E_POSTAB = I_POSTAB.
Then you should add some ABAP code for getting customer & vendor details.
I give you some examples, you can use it. (Next message on this thread, please check)
Then save and active FM.
Call FIBF transaction again.
FIBF -> Settings -> Process Modules -> ...of a customer
Define a new line.
Process: 00001650
Function Module: ZFI_INTERFACE_00001650
Product: ZFI
and this customizing.
Then you go to SE38 transaction.
start report RFPOSXEXTEND. After starting, a pop-up appears, you must click YES.
After those operations, you can see customer/vendor code and their names on FBL3N.
ABAP source example,
TABLES : bseg, kna1, lfa1.
IF sy-tcode = 'FBL3N'.
CLEAR: bseg.
SELECT SINGLE *
FROM bseg
WHERE bukrs = i_postab-bukrs
       AND belnr = i_postab-belnr
       AND gjahr = i_postab-gjahr
       AND koart = 'K'.
IF sy-subrc EQ 0.
    e_postab-lifnr = bseg-lifnr.
    CLEAR: lfa1.
    SELECT SINGLE *
    FROM lfa1
    WHERE lifnr = bseg-lifnr.
    IF sy-subrc EQ 0.
      e_postab-namek = lfa1-name1.
    ENDIF.
ENDIF.
CLEAR : bseg.
SELECT SINGLE *
FROM bseg
WHERE bukrs = i_postab-bukrs
       AND belnr = i_postab-belnr
       AND gjahr = i_postab-gjahr
       AND koart = 'D'.
IF sy-subrc EQ 0.
    e_postab-kunnr = bseg-kunnr.
    CLEAR: kna1.
    SELECT SINGLE *
    FROM kna1
    WHERE kunnr = bseg-kunnr.
    IF sy-subrc EQ 0.
      e_postab-named = kna1-name1.
    ENDIF.
ENDIF.
ENDIF.

Trying to add a flowable/expandable text field to the end of a form

I have created a form in LiveCycle Designer. At the end of that form, I would like a Summary text box that expands to allow the person who is filling out the form to type as much information as is necessary and it will all be visible/print when they are done. I have the field to the point where it will expand (finally!) but I have requested that the field allow page breaks (including all subforms it is contained within) but when it expands, it all carries over to the next page and doesn't allow us to go beyond one page of typing. Is there anyway to remedy this situation so the text will actually "flow" from one page to another instead of just carrying it over?

I appreciate you replying to my post and maybe this is just that I have never used the forum before but your reply said that you hoped the sample document would help me and I don't see a sample document attached to the reply. Am I missing something?
Date: Wed, 24 Nov 2010 18:32:12 -0700
From: [email protected]
To: [email protected]
Subject: Trying to add a flowable/expandable text field to the end of a form
I hope this sample file solve your issue too.
>

Incomplete text displayed in interactive ADOBE form

Hi Guys,
I have an interactive adobe form where a drop down will display "EQUIPMENT NO" W.R.T to the selection screen i/p
uporn selection of the "equipment number" the "EQUIPMENT NAME"field automatically populates.
I used to get an error message "Entry is too long",
got rid of it by setting the value of TYPE property of attribue to "MAXLENGTH" , uporn doing this the drop down and the discription text is displaying only last 3 char of the values.
I tried increasing the size/characters of the fields in the table in the form but was of no use. Any inputs will be Appreciated

Yes I have checked all the subforms Flowed. Text field is working good in Preview Pdf Option of NWDS.
But when I generate the pdf on server, when TextField flows to next page, on next page it repeats from first line.

Variable field in Text module which is used in Adobe forms

Hi All,
I want to use text module in my Adobe form to display text .
Problem is that i want to insert a variable dynamically in text module i.e.
My text is:
For example : "In the period from &EMPLOYEE_DETAIL-PERIOD& you have not paid your tax:"
Now EMPLOYEE_DETAIL is a structure in context of form with period as field .
I want that data stored in this field should come in adobe,right now instead of data this text &EMPLOYEE_DETAIL-PERIOD& comes i.e. this is considered as text
I tried this with SO10 by clicking on the "add" icon, i am getting a pop up screen with the following option. can you please help me which option to select and how to define the variable?
Options given in pop up screen
1. Symbols,
2. Command,
3. Text Element,
4. Comment,
5. SAP Characters
6. Link
6.1 Char Format
6.2 Key
6.3 Text
if suppose i am using the wrong button please tell me where i can find this "add" button.
Thanks and Regards,
Karunakaran

Hi,
Use the floating field in Adobe.
Use a Static Text Field and Insert the Field EMPLOYEE_DETAIL-PERIOD from your Data View
Thanks.
Uma

How to display the Standard Text (SO10) based on condition in adobe forms

Hi,
I have created the Standard texts (through SO10 tr.code) of 4 plant addresses. In the Layout of adobe form, i want to display any one plant address based on the plant number (as a input) and the rest 3 standard text need to be hide. i tried in Form clac to hide, but i unable to succeed. could you please help me, in this regard.
Thank you.
Regards,
Mallikarjuna

Hi,
You can add all the 4 text in your context menu and create an condition for text.
Example: (LS_HEADER is a structure only for example, you need to decide based on your own form interface)
Text_1000                                Condition -> LS_HEADER-WERKS = 1000
Text_2000                                Condition -> LS_HEADER-WERKS = 2000
Text_3000                                Condition -> LS_HEADER-WERKS = 3000
Text_4000                                Condition -> LS_HEADER-WERKS = 4000
The text satisfyling your condition will only be printed and you can assign these text to the same block in PDF form.

Values not capture during adobe form display on pa30.

Hi Experts,
I have attached Adobe Form into Transaction PA30 in which form values are not capturing during form display,
But its displaying at the time of form generation on ZHINUREQ_CORRS_LETTER program.
Kindly give suggestion.
Regards,
Abdul

Hi Saujanya,
This could by caused by the network, the used browser or additional browser plugins. Try to do the following:
1. Test with an alternative browser (if you are on a SP which supports different browsers than IE, see PAM, http://service.sap.com/pam): If it works with Firefox, then you know the problem is caused by IE and not by the OS, network, ...
2. Deactivate/uninstall all additional browser plugins/add-ons (like google toolbar, Yahoo toolbar, ...)
3. Create a client trace as explained in SAP note 999998. Maybe there's a hint in the trace. Watch for something like "ERROR".
4. Install a HTTP sniffer (like "fiddler") on both machines and compare the network traffic. Maybe there's a request with a 4xx HTTP status code?
5. How is the machine connected to your network? Is it behind an additional webproxy?
Hope one of this helps,
Ralf

Displaying items in adobe form

Hello All,
I am new to adobe forms.
i need to display billing items, in the adobe form .
i have created interface, and imported this table. till here i am clear. but i dont klnow how to display
this information in layout.
i need to diaply heading and under that relevant data. i ahve total 100 row in billing items table.
please guide me how to acheive this.
P.S.: i ahve gone through forum, all of them are takling about, some dynamic display, and table inside table.....this kind of advanced stuff.
thanks a lot inadvance
Best Regards
Amarender Reddy B

Hi Amarender,
Try using a Two subform layout for displaying the tabular format. The design should be this way.
>Parent Subform (Flow Layout and Flow direction is Table and Allow Page break within contents checked)
>Column Header(use static Text)
>Child Subform(Flow Layout and Flow Direction is Table Row)
>Columns binding(user text field and bind it to the Value node attribute and Repeat subfom item checked)
This is how u display the data in Table format in PDF.
Hope this helps u
Regards,
Poojith M V

Dynamically bind website text field values to PDF document

Hi there,
I am in search of a step by step tutorial on how to generate a pdf document based on values from website text fields.
I have a form produced in Live Cycle Designer ES3 and a website in which we insert test results for our company to a MySql database.
My thoughts was that when we have inserted values on the website we could have a link to the pdf document and the same values would
somehow magically appear on the pdf. Have read somewhere that this can be done with XML and the use of different 3rd party programs.
Is this possible?
What approach would be the easiest? Perhaps someone knows about a tutorial on the matter?
Data is stored from PHP website to MySql database. Website produced in Dreamweaver CS5
Thanks in advance for any tips/help!
Regards,
Christian

It's possible with an XFA form as well as an AcroForm, but to do the work on a server additional software is needed as you mentioned. Adobe's offering is in their LiveCycle lineup and possibly . Others from third-parties include FDFMerge, PDFlib, iText, Debenu Quick PDF Library, and others. The idea is you merge the data with the PDF on the server and serve it up or save it on the server and provide a link on the HTML page that's returned. Documentation for these libraries will include samples, but you'll also have to learn how to do this securely if that's important for the system you're putting together.

Text Field value display twice in Adobe Form.

Similar Messages

Maybe you are looking for