Making short text field in Display mode for one particular Purchasing

Hi All,
This is regarding Making the Short text field in Display mode of PR for one Particular Purchasing.. i am giving you a bit elaborate...We are into E-Catalog Procurement.I will do the shopping from the Vendors external catalog and i will return back to SAP.
While doing so, i dont want the user to change the Short Text field. I want that field shud display the Description. When i tried with the Screen Layout settings, it is fully grayed out and i am not able to see the Description of the Material. Is there any other options to get this enabled?. Please advice me on this settings to be done. Thanks in Advance.
With Regards,
Saakithyan

Hi
Define a Field selection key (new not the one which is assigned to document type) which makes short text editable in screen layout config. and assign it to functional authorization value in t.code OMET. (it should be numeric). Then assign that functional authorization value in user master SU01 for users with parameter id EFB.
Then it will work
Regards
Antony

Similar Messages

Need to show some fields in display mode

Hi, i need to show some fields in display mode for VA02 transaction code( is to change the values) for some particular users. so do we have any user exits for this requirement?
Please answer me. its very urgent.. thanks in advance.
ex: payment terms and freight terms.

you can try this for header level data
MV45AFZZ exit ""USEREXIT_FIELD_MODIFICATION"
code would be like below
   CASE screen-name.
To suppress Pricing total and Cuurency field at header
      WHEN 'VBAK-NETWR'.
*YOU CAN ADD YOUR CONDITION HERE WHICH IF SATISFY THEN *EXECUTE NEXT LINE OR SKIP IT
      screen-INPUT = 0.
      WHEN 'VBAK-WAERK'.
          screen-INPUT = 0
    ENDCASE.
but it depend upon what data AND in which tab you want to hide, like is it at header level or at item level or pricing (HEADER OR ITEM) data each of them have different exit to restrict data modification.
ENJOY SAP.

Make short text field in Purchase order creation only display..

Sir,
Yeah my requirement is quite unusual, but such is the situation.
I want to make the short text field in purchase order creation "only disply". what is happening is that user while creating PO is able to change the text of material in short text column. I want to make it only for display.
Can it done on document type level, since for service type, and Text type of account assignment cat, only text field is filled up. so how to do it.
Please assist...
Rahul

Dear Rahul,
If you want to have the short text display only for standard item but not service item, you may check below customizing.
Transaction SPRO:
MM-PUR-PO
-> Define screen layout at document level
Field Selection group: Basic Data, Item
Field Selection Key: PT0F Standard item purchase order
Field: Short text -> set as display
Hope this help.
Ian Wong Loke Foong

Ship-to-party field in display mode in TC va02 for some users.

Hi Sap Gurus,
My client requirement is this ,he wants the ship-to-party field in TC Va02 to be in display mode for some lower level user and at the same time she wants the ship-to-party field for higher level users to be editable.
Can anybody tell me how to do this .Va02 TC will be given to lower level users where they will be able to edit other fields except ship-to-party.
Thanks N Regards,
Siddhartha

Hello Siddhartha ji,
I think you can proceed in this way:-
Create TCode zva02 by copying from VA02 .
Then Create Screen Variant and assign that screen variant to transaction variant .
Then Create Variant Group for that Tcode and then assign this variant group to those particular users.
Even you can proceed with out creating the ZVA02 Tcode.
All Will be done in SHD0 TCode.
@ others :- i am basicaly into ABAP...so I may be wrong...pls Help him out ..
Regards,
jeevan kumar Medimi.

Guideline for Using 40 Char in Short Text Field of Material Master

Dear Experts & Forum Members,
In MM01 while creating a Material Master record (spare part) we need to fill in Basic Data. It has a field known as "Short Text Field " This Field has limitation of 40 characters. This is the same field which has Searched associated with it. This description is what we see when we look for Stock Overview of Material in the Stores through MEMBER.
To use this 40 characters efficiently people usually come up with a guideline so that maximum and meaningful information crucial information for identification of spare part/material is VIEWED when we see it.
For example for an AC Motor the description may look like
*MOTOR AC SQ 100KW 1500 RPM 8P CLA FRXYZ
which describes AC Motor, Squirrel Cage Type, 100 KW, 1500 RPM, 8 Pole, Class A, Frame Size XYZ
Request the forum members to provide / share any guideline they might have come up with to use these 40 characters to describe different spare parts.
Thanks in advance for your help.
Regards
Vinay
Edited by: VINAY MAITHANI on Jul 15, 2010 6:51 PM

Hi Vinay,
We are also doing the same activity and we are arranging the material description in a manner which is almost simlar to you.
But, except one thing which is Classification. We have classification feature mapped with material master for the details of Dimension,Brand,Color and Orgin.
For further commets, rever back.
Regards,
NAK
Edited by: abdul kader on Jul 28, 2010 9:36 AM
Edited by: abdul kader on Jul 28, 2010 9:38 AM

Display mode for Material Description in MM02 for Partucular User/UsrGroup

Dear friends,
I required to set: Display mode for Material Description in MM02. (Configured thruu2019 Maintain field selection to data screen)
For Particular User / User group, it should be Change mode. How to achive this. Please advice.
Thanks and regards,
RAMAN

Hi,
I don't think you can realize it, because in SAP system there are 6 influncing factors:
Material Type
Plant
Industry sector
Transaction
Procurement indicator
SAP Delivery
Field selection is controlled by field references. You can assign field references to the influencing factors material type, plant, and industry sector in Customizing. SAP maintains the assignment of the field reference to the transaction codes, to the procurement types, and for the SAP delivery. You cannot change this assignment of these field references in Customizing.
So from my point of view, you can't use the factors of material type, plant and industry sector to distinguish different users' authorization.
Good day
Tao

If we can increase the length of the Short Text field in a purchase order?

Hi Experts,
Please suggest if we can increase the length of the Short Text field in a purchase order?
If yes, How? and what will be the impact?
Thanks
Gavar

Dear Arpit,
You can use PO Text field for long description of the material.
Regards,
Manish Jain

G/L Account Long Text Field in Display

Dear Sir,
I want G/L Account long text field be displayed along with G/L account number in G/L Account line item display report (FBL3N)
I cheched the layout, the option of G/L account number is available but option of G/L account Long text is not available.
Kindly guide me as to how can I do it?
Regards
Chirag Shah

You must do some development for it.
You can add additional field to FBL*N reports with using BTE exit.
First of all, if you don't use BTE before, you must create a product on FIBF.
Call FIBF transaction -> Settings -> Products -> ...of a customer
Create a new line,
Product: ZFI
Text: BTE Products for FI Exit
Product active: tick checks from activation.
Then you must call SE11 for structure RFPOS.
You must use append structure function for this structure and you can define ZFI_RFPOS append structure
Define 4 fields.
Component: KUNNR - Component type: KUNNR
Component: NAMED - Component type: NAME1
Component: LIFNR - Component type: LINFR
Component: NAMEK - Component type: NAME1
Then save and active your RFPOS structure.
After that, you must do same step for structure RFPOSX.
Then go to SE37 and copy from SAMPLE_INTERFACE_00001650 to ZFI_INTERFACE_00001650 FM.
After copy action, you must uncomment this line on ZFI_INTERFACE_00001650 FM's source code. It's very important;
E_POSTAB = I_POSTAB.
Then you should add some ABAP code for getting customer & vendor details.
I give you some examples, you can use it. (Next message on this thread, please check)
Then save and active FM.
Call FIBF transaction again.
FIBF -> Settings -> Process Modules -> ...of a customer
Define a new line.
Process: 00001650
Function Module: ZFI_INTERFACE_00001650
Product: ZFI
and this customizing.
Then you go to SE38 transaction.
start report RFPOSXEXTEND. After starting, a pop-up appears, you must click YES.
After those operations, you can see customer/vendor code and their names on FBL3N.
ABAP source example,
TABLES : bseg, kna1, lfa1.
IF sy-tcode = 'FBL3N'.
CLEAR: bseg.
SELECT SINGLE *
FROM bseg
WHERE bukrs = i_postab-bukrs
       AND belnr = i_postab-belnr
       AND gjahr = i_postab-gjahr
       AND koart = 'K'.
IF sy-subrc EQ 0.
    e_postab-lifnr = bseg-lifnr.
    CLEAR: lfa1.
    SELECT SINGLE *
    FROM lfa1
    WHERE lifnr = bseg-lifnr.
    IF sy-subrc EQ 0.
      e_postab-namek = lfa1-name1.
    ENDIF.
ENDIF.
CLEAR : bseg.
SELECT SINGLE *
FROM bseg
WHERE bukrs = i_postab-bukrs
       AND belnr = i_postab-belnr
       AND gjahr = i_postab-gjahr
       AND koart = 'D'.
IF sy-subrc EQ 0.
    e_postab-kunnr = bseg-kunnr.
    CLEAR: kna1.
    SELECT SINGLE *
    FROM kna1
    WHERE kunnr = bseg-kunnr.
    IF sy-subrc EQ 0.
      e_postab-named = kna1-name1.
    ENDIF.
ENDIF.
ENDIF.

Short text field information of a service notification

Hi everyone,
Please guide me about the following query: How can we find the complete short text field information of a service notification.
Please guide me how can i find this information for all the service notifications which are created in a specific time period.
Through transaction code IW29 or IW59, complete field information is not available.
Please guide.
Thanks and Regards
Edited by: MP Vashishth on Apr 3, 2010 8:26 AM

Pavan Kumar P.
BAPI_ALM_NOTIF_SAVE is only for the header.
Questions relating to BAPI_ALM_NOTIF_DATA_MODIFY:
What input parameters are you using when calling the BAPI
Did you use the NOTIFACTV_X tables
Are there any values in the RETURN table
PeteA

Production order no is missing the Batch short text field in MSC2N T.code

Hi Guys,
I have some requirement in my project. I have maintained Batch management in my project.
When I create & release the Production order in CO01, immediately Batch number (Produciton order: Goods receipt tab) creates automatically by the system.
Also this same production order should be appeared in the Short text field in Basic data 2 tab in the transaction MSC2N.
But this production order no. is not updated automatically in the short text field in MSC2N.
Is there any standard settings available for this case?
Please help me the same.
Regards,
Mohan

Hi Mohan,
There is no standard link between Production Order and Batch Master Record, If your client needs the production order number in Batch Master record, short text field. we need to achieve it thro user exits with the help of developers.
Thanks
Balasubramanian NSD

How to validate an text field item using javascript for numbers only.

hi,
how to validate an text field item using javascript for numbers only.please help me on this urgent
please mail me solun if posible on [email protected]

Hi,
Page HTML header
<script>
function onlyNum(evt) {
// Usage: onKeyPress="return onlyNum(event)"
evt = (evt) ? evt : window.event;
var charCode = (evt.which) ? evt.which : evt.keyCode;
if (charCode > 31 && (charCode < 48 || charCode > 57)) {
    var status = 'This field accepts numbers only!';
    alert(status);
    return false;
var status = '';
return true;
</script>Item HTML Form Element Attributes
onKeyPress="return onlyNum(event)"Br,Jari

Display list of sales orders for one particular customer using BAPI in WD

Friends,
i want to display list of sales orders for one particular customer, the materials ordered, quantity ordered, goods issue date of that particular order and contact information about that particular customer, using Webdynpro.
Please somebody send me related info,blogs,help links , to complete this task, this is very urgent.
Please help
Peter

Find the WD tutorials here...
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webdynpro/web%20dynpro%20sample%20applications%20and%20tutorials.htm">Tutorials</a>

Query not executing for one particular value

Hi
I have query on multi provider. and this multi provider is combination of Info objects only but not any ODS or cubes. I have one key figure in this multi provider.while executing the query i need to give input for variabl which has 7 different values. Query is executing fine for 6 values but not for one particular value.
query executed in listcube transaction and it is executed fine here for the same selection. then what might be the reason?
Please advise as soon as possible.
Thanks

Hi Kiran,
are you maintaining any filters in the query? or is there any logic in the exit for this variable.
regards.

EDI message is not sending to the third party for one particular SA

DearAll,
We have the scenario to send the schedule lines to the third party system. for one particular schedule agreement schedule lines not sending to the third party system.
while processing the messgae it is giving the error as "Message XEDI already processed on 20110317 070042"
What could be the reason?.. we have checked all the EDI settings maintained for this supplier. some two weeks back there is no problem now only getting this message.
how to resolve this?..
Thanks in Advance
Ananth.

Hi Hareesh,
Thanks a lot for the help. I have tried with removing the xml namespace, still the same result. I believe, the problem is with MTs tag in response message structure, bank xml data is trying to map with the response structure in PI, but when its finding the MTs tag I believe then its not mapping, and directly its passing the response in SXMB_MONI without any mapping.
My question is how can I define my response structure without the MTs tagm, I mean same as what I am receiving from bank.
Also I tried with without any mapping in response structure, I mean I used only one Message type for "response from bank" to "response to ECC" , without xml namespace, in this case I am able to receive the response in ECC, but there is exception called "PARSE_APPLICATION_DATA Error during XML => ABAP
conversion: Response Message; CX_ST_MATCH_ELEMENT in " while receiving response, and when I go and see the logs, it says "System expected element 'MT_Response_MT940_Test'" , as its try to match with the defined structure in PI.
Please experts help me, so my question is how can I avoid the MTs tag in my response structure, I just want to define my response structure in PI same as bank is sending me the data in xml tag, without any MTs tag.
Thanks,
Farhan

Ship-To Address not getting picked for one particular user

Hi SRM Gurus,
I am working on SRM5.0 system with ECC6.0 as backend.
For one particular SRM user, the Ship-To address number which has been maintained in his attributes through transaction PPOMA_BBP, as default delivery address, is not populated when he creates a SC.
This default ship-to address is not seen while creating the cart even though the address can be found via the F4 search help in the same SC.
Can anyone tell me why this is happening for one particular user?
Please note that this problem is occuring even when the user is shopping for self and creating a new SC (no copying from template). So SAP note 1055203 is not valid in my case.
I have checked the ADRC table, and this address number exists. Infact, when I assign this address number to some other user's Ship-To attribute, this default delivery address is picked in the SC.
So, I understand that the problem is not with the address, but with the linking of this address number to this user. I even tried deleting and re-assigning the address number in the attribute to this user. But, it doesnot work still.
Can anyone help me out?
Thanks n Regards,
Ancy

Ship to address not being picked from attributes for any user it was being picked from Org address data , and I had reset the value
now , when I am trying to create a SC and I have tried to add delivery address bby 2 types .
1. By adding through the portal
2> i have tried to add the same throgh ppomabbp in user attributes "Delivery address"
I have also made it default however when I raise the SC it again shows me as blank :
I am not too sure how do I populate the value that I need . Please see below still the delivery address is blank !!

Making short text field in Display mode for one particular Purchasing

Similar Messages

Maybe you are looking for