Text in column too long to display

I've 2 column that contain text. I wish to show both the columns full text along with other column in a single page. Text to show up in a few lines is expected. Hope someone can give me a clue.
Thanks

Hi Ranjeeth,
For example I have 5 columns to show up. Column 3 and 4 contains text that have 50 char set to them. View limit is 80 chars. I wish to have the view to show all the columns, each record can be in more than 1 row. Is this possible?

Similar Messages

  • Output columns too long

    Hi,
    I've a join over two tables with about 150 columns. This was never a problem.
    Now I have two MAXDB databases from two customers (7.6.06.03). In one of them my statement says "output columns too long", running the same application on the second db works fine.
    Any ideas?
    I guess there is a problem with maximum record length of about 8000 bytes. Can this be extended in any way?
    Any help will be appreciated.

    >
    Christoph Schwerdtner wrote:
    > Thank you all for your help.
    >
    > In fact I tried even further. I fixed the current problem by reducing the amount of some columns and also I did a redesign of to user functions. Output was 1000 chars, i reduced it to 200. Now it works fine.
    > I realized that SQLStudio has more restrictions than my own ODBC connection from inside my application.
    > Statements that doesn't work with SQLStudio are running without problems from my app.
    > Strange things are going on...
    Hmm.. this sounds a bit odd.
    Do you use prepared statements in your application?
    Concerning the change of limitations, just compare the documentation
    [Restrictions for 7.6|http://maxdb.sap.com/doc/7_6/f6/069940ccd42a54e10000000a1550b0/content.htm]
    >>> Internal length of a table row: 8088 bytes
    [Restrictions for 7.7|http://maxdb.sap.com/doc/7_7/45/470c541fb54e2de10000000a114a6b/content.htm]
    >>> Internal length of a table row: 32767 Bytes
      @Lars Breddemann: do you suggest to move to 7.7? Are there any problems? How do i the update?
    Yes, absolutely.
    7.7 has been out for years now and it's pretty stable.
    To perform the upgrade, I'd go for simply using SDBSETUP.
    Alternatively you may use SDBUPD (textbased interface).
    Ok, now you've got a project for the early days in 2011
    Have a nice holiday season!
    Lars

  • Ring Item text string too long to display all - use ellipses ?

    The width of my Ring control is not wide enough to display all characters in the Item text string.  LabVIEW simply truncates the text with no indication that additional text is present.  Is there a way to display an ellipses in such cases ?  For example :
    "Ring text string that is too long"
    that is now shown as :
    "Ring text string that i"
    could be shown as :
    "Ring text st...too long"

    A couple of suggestions:
    1.) Use property nodes to determine which strings are too long, then concatenate the strings with ellipses.
    2.) Increase the height so the text wraps.
    "There is a God shaped vacuum in the heart of every man which cannot be filled by any created thing, but only by God, the Creator, made known through Jesus." - Blaise Pascal

  • Why oracle text index column taking long  time

    why oracle text index column is taking long time to return result.I created text index on a column if I run the query on a single table result is very fast.If I join table with other table (10 records only )
    it is taking long time but in explain plan it is searching by index only.
    I created this index for searching a varchar2 column,the data is comma seperated values like ( UK,US,IT,BR) and the table having records 20 lakhs.Normally if I query with like operater
    ( like '%US%' ) it is taking full table scan because I am using '%' both sides. Please help me on this regard how to search the data with less time. Here is may sample code and explain plan.
    SQL*Plus: Release 9.2.0.1.0 - Production on Wed Jan 28 16:54:22 2009
    Copyright (c) 1982, 2002, Oracle Corporation.  All rights reserved.
    Connected to:
    Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
    With the Partitioning, OLAP and Oracle Data Mining options
    JServer Release 9.2.0.1.0 - Production
    SQL> set timing on
    SQL> set linesize 180
    SQL> explain plan for SELECT T.esongid FROM (SELECT A.ESONGID FROM wcmedeco.EDECO_ESONGS_TERR_CTRY 
    A WHERE CONTAINS(A.TERR_CTRY_NAMES,'US')>0  
      2  GROUP BY A.ESONGID)K,T
      3  WHERE  K.ESONGID=T.ESONGID;
    Explained.
    Elapsed: 00:00:00.01
    SQL> select *from table(dbms_xplan.display);
    PLAN_TABLE_OUTPUT
    | Id  | Operation                      |  Name                   | Rows  | Bytes | Cost  |
    |   0 | SELECT STATEMENT               |                         |     1 |    26 |     4 |
    |   1 |  NESTED LOOPS                  |                         |     1 |    26 |     4 |
    |   2 |   VIEW                         |                         |     1 |    13 |     4 |
    |   3 |    SORT GROUP BY               |                         |     1 |    89 |     4 |
    |   4 |     TABLE ACCESS BY INDEX ROWID| EDECO_ESONGS_TERR_CTRY  |     1 |    89 |     2 |
    |   5 |      DOMAIN INDEX              | IDX_TERR_CTRY_NAMES     |       |       |     0 |
    |   6 |   INDEX RANGE SCAN             | IDX_ESONGID_T           |     1 |    13 |     1 |
    PLAN_TABLE_OUTPUT
    Note: cpu costing is off, 'PLAN_TABLE' is old version
    14 rows selected.
    Elapsed: 00:00:00.00
    SQL> Regards,
    Rajasekhar

    You have not formatted your code properly so we cannot see the query you're executing. Please put some line breaks in.
    Secondly, how fresh are the statistics on those tables? Are you really returning one record out of twenty million?
    Cheers, APC
    blog: http://radiofreetooting.blogspot.com

  • Text boxes appear too long

    Hi input boxes on sites appear too long. See picture attached [http://example.com https://skitch.com/68-design/ex1gx/input-boxes]
    Thanks in advance
    Andy

    That is usually caused by a problem with the font that is to big or otherwise corrupted.

  • Report takes too long to display

    Post Author: NGCMatt
    CA Forum: Publishing
    I am using Crystal XI, Vsual Studio 2003, SQL Server 2000 and Windows Server 2003. I create a report in Crystal and then add it to my Visual Studio 2003 project. Then using the CrystalReportViewer in Visual Studio 2003 I create a webpage then stick in the CrystalReportViewer on the page then add all the properties and other code in the code behind page. Like a close button on the page so when the user clicks on the close button the crystal report page closes and goes back to the home page.
    When I run the report from my developement machine the report displays in less than 5 seconds and when the close button is clicked the crystal reports page closer in less than 2 seconds and returns to the home page.
    But after I deploy by web app to the server and try to run a report it ALWAYS takes longer than 40 seconds to display and even longer to close. This is driving my customers crazy.
    What am I missing??????
    Thanks for the help.
    Matt

    Is it possible the java memory is not high enough on the service (assuming Windows). Try to Set the JVMOption to -Xmx1024m (default is 512m) on the "HyS9WebAnalysis" registry entry under HKEY_LOCAL_MACHINE\SOFTWARE\Hyperion Solutions\WebAnalysis

  • Text messages take too long to send

    Just reccently upgraded to the new Iphone 5C and now all of a sudden (week later) I've noticed text messages trying to send for hours while others send right away. Not sure why its taking so long??

    the early N series had a problem like this, the solution was to download a programme from Nokia support pages for the appropriate handset
    sms accelerator i think it was called, maybe there is the same for E70, i cant look as for some reason the only nokia web pages i can look at are the discussion pages, anyone else having a problem getting into nokia.co.uk etc?
    Phones I've owned (not in any order) 8210 7100 3510 3510i 7650 9210Communicator 1600 3310 3330 3650 5110 6230 9500Communicator N70 N90 N91 N73(ME) N95

  • How to edit music album names - too long to display in Ipod

    How can I edit music/audio album names. I don't really care about music but I have a lot of audio files and they all have the same name, followed by "Disk 1," "Disk 2," etc.  The problem is that the "Disk 1" doesn't get displayed because there's not enough room on the Ipod display.  I would think I could edit this in Itunes but don't see how to do it.  I would like to1 shorten the title so the "Disk 1" can be displayed.  Hope that is clear.
    Thanks for any help. 

    You can edit album names in iTunes on your computer.
    Select all of the songs in the album, Select Get Info from the File menu, edit the Album name in the Info tab of the Get Info window and select OK.
    This will change the name of the album. Note that you must change the album name for all of the songs in the album or you will end up with two albums.

  • Oracle Text Query taking too long

    When we run a query:
    select docid from Tbl1 where contains(doc,'queryterm',1)>0;
    on 2 million docs it runs in <2 seconds
    When we run an insert into another table based on a search:
    insert into Tbl2 (col1,col2) select 10,col2 from Tbl1 where rowid<2000; (10 in the select statement is a constant)
    it runs in <2 seconds
    Here's the kicker:
    insert into Tbl2 (col1,col2) select col1,col2 from Tbl1 where contains(doc,'queryterm',1)>0;
    it runs in 60 seconds and produces ~2k rows
    Is there any hint that we can use to fix this?
    TIA!

    We've looked hard at the performance notes for Oracle Text, the Application guide and the FAQ on it.
    We've dropped the index on the table being inserted, turn off logging and used the Parallel hint on the insert. There is still a bit of a disconnect between insert speed, select speed and both together. The index was built using the parallel option so the queries should be parallel if I understand the performance hints correctly.

  • Workbook Precalculation: "Message text too long:

    Good day
    I have setup the precalculation server/services and all is well except for the size of some workbooks.  I receive the following message:
    u201CThe message could not be delivered to recipient  because the message    
    text was too long. The node used supports messages up to a a length of  
    20,000,000 bytes. The message text is, however, 43,152,918 bytes long.u201D
    I have deleted the results from the workbook before precalculation and the file is zipped for email.
    Where in BW will basis have to increase the size when a workbook is precalculated and mailed?
    Thanks in advance.
    Cj

    Hi,
    Please refer this link for the same -
    Re: error  Entry is too long  is displayed for the text edit
    Regards,
    Lekha.

  • Takes too long to send photos

    The photos on my ip4 are too large, when sent with text it takes too long, they megas instead of kilos. Can this be adjusted?

    Daniel:  I took a look at your code and don't see any problem with it.  However, doing the math:
    19,200 BAUD = 19,200 BITS per second.
    10 BITS per BYTE ( 1 BIT start + 8 BITS data + 1 BIT stop = 10)
    19,200 BAUD = 19,200/10 BITS per BYTE = 1,920 BYTES per second
    1,920 BYTES per second / 1000 milliseconds per second = 1.92 BYTES per millisecond (ms)
    Now the above would not be a problem since you are only waiting for one character (which should only take 0.52 ms), however, you are sending 5 bytes.  That's a total of 6 bytes round trip or 6 * 0.52 ms = 3.12 ms.
    In addition, having "Enable Terminating Char" on your VISA Configure Serial Port can't be helping unless your serial LIN device requires it because having to wait for a teminating character on a read or write (in your case it appears you are using a 0x0A or line feed) increases the number of characters that need to be transmitted. 
    Another thought just came to me:  If your serial device is sending a terminating character, it is possible you may have a second read operation each cycle due to the 0x0A (line feed) and the fact that your code only reads one byte at a time from the serial port.  This may also add some time to your response.
    I hope this helps.
    Message Edited by Bill_in_Detroit on 03-18-2010 09:16 AM

  • Text information being displayed too long.

    Hi, I have a database table containing text information. I
    want to displayt this information on a webpage but when I try to do
    so the text doesnt break as soon as i want it to, so it looks
    something like this:
    the inforamtion from my database is being displayed way too
    long. I want
    it to break sooner.
    instead of how i want it to be shown, like this:
    the information from my database
    is being displayed way too long I
    want it to break sooner.
    if anyone could help me with this I would really appreciate
    it. Thanks.

    ...And since we're not in the early 90's anymore, we kindly
    forget tables when it comes to representing any data that is not
    in... errr... a table :-)
    <style type="text/css">
    .properwidth {width:300px}
    </style>
    <div class="properwidth">
    #longtext#
    </div>

  • Does text index gets effected by "line too long" -- File_datastore

    I am trying to create text index using following index script:
    create index T_SRCH_IND_DF_IDX
    on t_search_index(data_filesystem)
    indextype is ctxsys.context
    parameters ('DATASTORE myDS
    lexer lxrprtjoins
    filter MY_FILTER
    format column fmt
    memory 10M');
    Index gets created on some files. For other files (xml,pdf, txt) I get :
    DRG-11513 unable to open or write to file %s
    One thing i noted in these files is that all these files have
    "Line too long" when accessed using "vi" editor.
    Does Line being too long matters on text index creation?
    Also I get multiple "DRG-11513 unable to open or write to file %s"
    for same file oracle tries to index in ctx_user_index_errors. Why not
    just one mesg is enough? Please advise...
    Thanks a lot.
    Tahir

    Garrett, Thanks for ur response.
    I am doing exactly what U advised. I loaded one of the file for which i was getting error mesg in
    a table a BFILE. try to read it using DBMS_LOB.READ. Below is the Procedure thatI am using to do all this.
    create or replace PROCEDURE ReadBLOB IS
    src_lob bfile; ---- modify datatype bfile to BLOB if trying to tread blob
    buffer RAW(32767);
    retval integer;
    amt BINARY_INTEGER := 32767;
    pos INTEGER := 2147483647;
    BEGIN SELECT docs INTO src_lob FROM del_bfile_table WHERE key = '1';
    DBMS_LOB.OPEN(src_lob, DBMS_LOB.LOB_READONLY);
    Retval := DBMS_LOB.ISOPEN(src_lob);
    DBMS_OUTPUT.PUT_LINE('IS OPEN? = '||retval);
    LOOP
    dbms_lob.read (src_lob, amt, pos, buffer);
    DBMS_OUTPUT.put_line('Cut = '||UTL_RAW.cast_to_varchar2(buffer)||' ...');
    DBMS_OUTPUT.put_line('Length = '||to_char(DBMS_LOB.GetLength(src_lob)));
    pos := 1;
    pos := pos + amt;
    DBMS_OUTPUT.put_line('pos = '||pos);
    END LOOP;
    EXCEPTION WHEN NO_DATA_FOUND THEN dbms_output.put_line('End of data');
    END;
    I get back 1 for retval. Funny thing is I am not able to get anything print anything
    using DBMS_OUTPUT.put_line after dbms_lob.read line in the code. Can't even print
    'Hello World'.
    Any idea why?
    Thanks a lot.
    Tahir Dildar.

  • Is there a way to change the master text length in FCP? The default length is 10 seconds, which is too long. I can easily adjust the length but I don't want to do it each time, and I don't want to adjust one and then have to copy and paste this length.

    Is there a way to change the master text length in FCP? The default length is 10 seconds, which is too long. I can easily adjust the length but I don't want to do it each time, and I don't want to adjust a text clip and then have to copy and paste this each time. Ideally, there should be something in User Preferences but there is not. Thanks.

    Maybe some one else can pipe up with a solution, but this would literally take 2 seconds to do for a new project.  And you can create a "template project" that includes this "text" clip.  Save this project and then to a get info and check "stationary pad."  When you double click on this file, fcp will open with a copy of this project and you just need to do a save as. 
    I've been working with computer editing systems for longer than i can remember and at a certain point you just have to adapt your workflow to the limitations of the software.  

  • Show end of label text when String is too long

    I have a JLabel with a string in it, but the string is too long for the label, and only the first part of the string is visible.
    How can I make the label show the end of the string?

    I use the field as a rollover helper. When the mouse rolls over a cell or column in a table, it shows the value in the textfield.
    Now, when the field gets a new value, it flickers because it first enters the string and shows it from the beginning and then scrolls to the end, causing a flicker.
    Is there any way I can get around this?

Maybe you are looking for