Text is writing on top of text and is unreadable

on many websites a lot of the text is written on top of other text making most of it unreadable.

If you have increased the minimum font size then try the default setting "none" as a high value can cause issues like you described.
* Tools > Options > Content : Fonts & Colors > Advanced > Minimum Font Size (none)
*Tools > Options > Content : Fonts & Colors > Advanced > [X] "Allow pages to choose their own fonts, instead of my selections above"
Reset the page zoom on pages that cause problems: <b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
*http://kb.mozillazine.org/Zoom_text_of_web_pages

Similar Messages

Can I typeset Chinese in InDesign CC? The text goes from top to bottom and right to left.

Hi!
Can I typeset Chinese in InDesign CC? I have downloaded the Chinese version of InDesign CC, but couldn't get the text to go from top to bottom and right to left. Do I need to download some sort of plug-in for this type of work?
Thanks!

There's little to nothing Adobe Reader can do about this.
The free Adobe Reader cannot create PDF, cannot export PDF page content and cannot manipulate PDF page content.
What is "on" a PDF reflects what was "printed" to PDF from back in the authoring file.
It is within the authoring file where you must make adjustments.
A related "source" issue is what label stock is specifically supported by the authoring application.
While all vendors claim their stuff is alway the same as your stuff that is often not the case.
A 1/64 th of an inch or less difference will put a wooden shoe in the works.
Be well...

Hit "Save as Adobe pdf" and pic came out on top of text box.

Win 7.0 64 bit, acrobat 11.0.10 word 2010, created a .docx file woth a pic and a tex box on top of pic.- hit Save as Adobe pdf and pic came out on top of text box.

Hi wmckb,
Please try using PDF Maker option in word and check if the same problem arises.
Hope to hear from you.
Regards,
Anubha

Text will NOT align to top of text frame

The text is low in the text frame even though the vertical justification is set to align TOP in the text frame options and the first baseline offset is set to Ascent in baseline options. There is no baseline shift or inset set and align to baseline grid is NOT selected. Any ideas how to fix it so the text is at the top of the box? Thanks!

@gtingley – did you try:
1. Copy/Paste the text frame to a fresh document?
2. Export as IDMS (snippet) file and place it again?
Just out of fun, did you try to copy/paste the text to a new text frame? Is a object format applied to the text frame? (Just fishing in the dark.)
Uwe

Writing HTML data in TEXT File

I am writing HTML content in TEXT file ...I read it in a string and then write using PrintStream...
But it writes all content on one line ..I want to write it as it was in source HTML file...

Perchance, the OP is referring to the lack of carriage returns in his outputted data, and querying where they have absconded to? An analysis of his posts to date reveals that he has read the contents of a File into a String variable, and wants to write the (presumably modified) String back to a file (uncertain as to whether this is the same file or a different one) In the process of outputting to said file, carriage returns previously contained in the original input file are not present in the output. I would hazard a guess that the OP does not want said carriage returns in the String to disappear.
Is my analysis of the situation correct?
An example of the code that you have written to date would be of extreme usefulness to us in aiding you in your noble quest.
Without such a resource, I must rely on my intuition instead.
Possible places that the carriage returns are being "dropped"
1 - On reading in. Are you discarding carriage returns while building up your variable?
2 - On manipulating. Are you processing this line by line, or reading it all into one large variable?
3 - On output - are you using "print" or "println" in the output?
I look forward to further correspondence with you sir
kind regards,
evnafets

For some reason when my daughter sends a text to someone else I get it and vice versa. Also, when I send a text to her the text comes to me as well. How do I stop this from happening?

For some reason when my daughter sends a text to someone else I get it and vice versa. Also, when I send a text to her the text comes to me as well. How do I stop this from happening?

This is iMessages, not an SMS/MMS, and this means the same Apple ID is registered for iMessage on each iPhone.
You or your daughter need to activate your own Apple ID for iMessage and FaceTime. The same Apple ID can continue to be shared for iTunes store downloads - for music and apps.
On the iPhone, go to Settings > Messages > Send & Receive. Select the Apple ID at the top and sign out. Sign in with the new Apple ID.
Make sure the same email address is not available below You can be reached by iMessage at on each iPhone.

Getting text to appear on top of Image In InDesign 5

I am struggling to get some text to appear on top of an image in InDesign 5. I did fiddle with layers but it doesn't appear to have multiple layers.
Could someone walk me through making this work?
Appreciate the help!
Brian

It seems that even if I turn the image off in layers, the text fiend does not sho up. In other words, if I create a text field outside the printable area for the boot, the text is displayed, but when I drag it into the printable area, the text goes blank.
Let me get this one thing straight though: But draging the text layer entry above the image layer entry, the text layer would thus be above and on top(visable).??
But it's not working as a result of the above mentioned. I still seems to have something to do with the image layer that exists on the page.
Ooops! Bob, you hit the nail on the head. Although there was no text wrap spacing added, the text wrap was on. So, selecting a particular image and removing "text wrap" only applies the attributes only to that image. All other images still have text wrap on.....which is what I want.
Thanks to all.

Calendar - Top of Text Cut Off

Hi all. Just recently, the top of all event title text in Calendar is cut off. And the words up on top has shifted up, I believe it used to be centered in its boxes. I'm referring to what I see on the screen of my MacBook Pro Retina, NOT in printed documents. Here's a sample. Any suggestions? Thanks in advance.

Oops, I mean that the BOTTOM of the text is cut off.

How to get the text to appear on top of the image

I am using the following piece of code to add a label to a JPanel -
JLabel label = new JLabel();
        label.setIcon(new ImageIcon("object.gif"));
        label.setText("An object");
        label.setBounds(xCoordinate, yCoordinate, width, height);
        display.setLayout(null);
        display.add(label);The problem is that the image is being placed over the text so I cannot see the text, does anyone know how I can fix this?
Thanks.

Try setIconTextGap in JLabel. Or, maybe your bounds
are too small.
JLabel also has a constructor that takes both the
icon and the text at the same time.I know my bounds are large enough because if I comment out the add image then I can see the text and there is enough room for it.
I don't think setIconTextGap can help me because that will just move the position of the text in relation to the image but I would like it to be directly on top of the image.
I tried the constructor but that is causing a java.lang.reflect.InvokationTargetException which is fairly strange because the method that im working on does not use reflection or change anything in the method which does.

Is it possible to highlight text in Apple Mail for incoming mails and outgoing mails?

Is it possible to highlight text in Apple Mail for incoming mails and outgoing mails?

If you mean that you wish to highlight messages from certain people or domain names, then if you select Preferences under 'Mail' (top left hand corner next to the Apple logo when you're in the mail application) and then select the right hand icon marked 'rules', then click on Add Rule and hopefully the rest is fairly self explanatory.
Best of luck

How Text Messages Are Stored on Palm Centro and possible recovery

I come from an extensive IT and programming background with emphasise on databases. I need some high level understanding of the text messaging system on a Plam Centro system with ATT.
Questions are related to Recoverying Deleted Text Messages
1. Do all incoming and outgoing messages get written to the messages_database.pdf on a Plam Centro (ATT)?
2. When a message is deleted, would it be correct to say that the message is not physically deleted but just that a record pointer in the database (messages_database.pdb) is reset so the messages appears to be deleted?
Why I ask, is that I see a many many requests for people (myself included) of wanting to recover deleted text messages. (i.e. my 16 daughter will not email now becuase we check email but she does text unknown people constantly and it makes it very hard to keep her safe). When she syncs her phone with her computer, the messages_database.pdb file is in the backup directory and if you open it with a text editor (notepad.exe) you can see only messages that have not beeen deleted. She usually deletes all her text messages. There is A LOT of extra data that appears to be encrypted and is not readable.
Is it possible that the text messages are there but just that the database record pointers hve been reset OR are Plam text messages written to RAM some how; although that does seem to be the case, since when you sync, the messages_database.pdb files has any and all messages that have not deleted.
It woul be VERY valuable (and I think profitable) if someone very high level knowledge of the messages_database.pdb file could write a PC application that would alloow you to undelete the text messages. I know there are programs out there that can do this on SIM cards on systems that write the text messages to the sSIM card, but it is my understanding that messages are not stored on the SIM card but in RAM.
Can any high level technical Palm programmer shed some light on this for me and let me know if there is a way to recovery deleted Text Messages on a Palm Centro?
Much Apreciated,
Greg
Post relates to: Centro (AT&T)

I had the same problem.
1.Search for a program call filez.prc (give your address I can send you) copy it to a memorycard. btw [email protected]
2. Copy it to the palm device(it works on any) activate the program on the palm chk rom at the top and chk all message database and smstxt and also some have 0000behind em. note the sizes as the older ones are larger and copy them to the card.
3. to view em use microsoft word and use recover txt from any file I think it is called. You will be able to see detail but be careful as it sometime displays truncated or mixed but you will be able to see most txt clearly.

Is it possible to have a text field have both auto font resizing and rich text format?

I am trying to make a field so I can bold or italicize within, but still have the capability to add as much text as I want with the font size getting small so that it all fits in the field. It seems I can have the auto resize OR the Rich Text, but not both. Is there a way around this?
Thank you.

You can't? Just to give you some context, I work as a graphic designer, I'm creating for the first time an iBook for a client and I have quite a few examples already.
A couple of vague examples:
- Imagine a diagonal animation from the bottom left corner to the top right corner of the page. I could do this with keynote or html, for example. Now imagine you want some text floating at the top left and bottom right corner.
I wont get into details, but the fact the animation is "cutting" through the text is very much relevant to the context.
- A page with a bold white title, a strong photographic lowkey background and some kind of interaction of top of it.
- A page with a keynote widget occupying almost the entire area, and a title in text format (that would superpose with they keynote but not with its graphics)
- etc etc
These are all impossible scenarios.
The actual interaction with text/images and interactive elements is nonexistent.
But I understand now that the interactive bits of the book must be separated from the other content - its context -which is a shame. And I understand it's not a bug, from what you say. The iBA interface shows the book like a PFD export, in a way, as well as the thumbnails at the Table of Contents, were all the text is visible. The actual pages have a different behaviour.
Thank you very much for the fast feedback. I will use the 'Provide iBooks Author Feedback' menu, as suggested.

Tables on top of text

Hi all,
I'm having a problem with tables in Pages 08. When I insert a table it inserts over the top of existing text. This wasn't a problem with this particular document until Pages crashed and had to be force quit. Am I looking at some kind of document corruption or just doing something stupid?
Cheers,
Andrew.

Hello
On my machine, tables are not inserted on top of text.
They are inserted as inline objects.
To change the status of a table, select it then open the Inspector of adjustment (maybe approximative name because I'm using the french version).
In the Inspector you will be able to trigger some radio buttons.
• Inline
• Floating
If you select floating (which seems to be your table's status) you will be able to check/unchek a box ruling the behaviour of the text around the table.
If you are afraid upon a possible corruption, you may archive your document's package as a zip file , attach the archive to a mail then send the mail to:
koenig PERIOD yvan AT tele2 PERIOD fr
I would be able to look at the doc's internals trying to discover if something is wrong.
Yvan KOENIG (from FRANCE jeudi 20 décembre 2007 13:31:55)

Top of text box moves up when typing new text exceeds box width.

Using iWork 09 I set a text box on a master and mark it as Format/Advanced/Define as text placeholder. In the Text Inspector, I set parameters as left justified, align text to bottom, line spacing = 1, and other numerical parameters to 0. Then, on a new slide using this master, the top of the text box moves up to accommodate additional text and it would be seem more natural for the bottom of the box to extend DOWN instead. What am I missig here?

it would be seem more natural for the bottom of the box to extend DOWN instead. What am I missig here?
No it wouldnt. If you understand that, align to bottom, fixes the last character in the bottom line to the bottom right hand corner of the text box, the text then flows from that corner as you add extra text.
You cant have align to bottom and have the text flow from the top, you need to choose between the three options.
If you want to add extra lines without the box moving; use align to top.
If you want to align the text to the bottom of the box; use align to bottom.
I set parameters as left justified,
There is no such thing as left justified. You need to choose between justified or left align, these are two different alignment methods, text is either left aligned, right aligned or justified, not a combination of them.

Autoflow Text makes boxes ON TOP of master linked boxes (IDCS3)

Using CS 3 version 5.0.4 on G5 Mac with OS 10.4.11
Adobe's instructions say:
"Flow text automatically
" With the loaded text icon displayed, hold down Shift as you do one of the following:
Click the loaded text icon in a column to create a frame the width of that column. InDesign creates new text frames and new document pages until all text is added to the document.
Click inside a text frame that is based on a master text frame. The text autoflows into the document page frame and generates new pages as needed, using the master frame’s attributes."
I am trying to import text into a book. I have formatted a master page spread and applied it to one document page. When I follow option 2 above ID is creating the requisite number of pages, it is creating full-page text boxes ON TOP of the text boxes from the Master page. It is completely ignoring the text frames based on the Master page.
I have sent my document and text to a friend who is working in ID CS 4. When he does the same thing it imports into the formatted frames.
How can I get this to work properly?
John

Michael,
It should be left to right. I must be dyslexic late at night. Sorry.
The two masters is one facing pages master for the bulk of the book, then a second master for chapter openers with a dropped frame, chapter title frame, or some other "special" condition that you don't want appearing in general. I may have misunderstood what the OP meant by "different."
The requirement for two pages is only if they are based on different masters (and after some playing, apparently perhaps only if the masters aren't based on one another in the order they are used). Here's the scenario:
Page 1 is a chapter opener with a dropped frame, and the rest of the pages need to be full height, so you create two master spreads, one for the opener and one for the main pages. The chapter opener master (call it A) can be either a single or two-page master, and can be configured with different height frames on either side if you wish. Normally one would assign Master A to page 1, then the second master (call it B) to pages 2 through the end of the chapter, so you add two pages to the document, the first based on A, and the second based on B.
If you try to autoflow starting on page one one of two things will happen, depending on the relationship between the masters (this is based on testing in CS4, but I have no reason to think it would be different in CS3): If there is no relationship between the masters, or if A is based on B (that is the based on relationship is not in the same order that the pages appear in the document), autoflow will jump over page 2 (and any following pages based on any master not based on A) and create new pages based on A to place the text that doesn't fit on page 1.
If Master B is is based on A, then autoflow will use the pages based on it, but will switch back to making pages based on master A when it adds new pages. If A is based on B.
If you place text only into page 1 (either by not holding a modifier key or holding the Alt [Opt] key for semi-autoflow to keep the cursor loaded), then move to page 2 and hold the shift key to autoflow starting on that page, ID will add new pages based on the master used on page 2.
On the other hand, if you DON"T use master text frames, ID will autoflow through all available pages, using the margin and column guides, and then add new pages based on the master for page 1(and this is different from what I had remembered -- I thought it would add pages based on the last page in the document), so if you don't have enough pages in the doc already, and page 1 is different from the following page, you still want to start the autoflow on page 2.
Peter

Text is writing on top of text and is unreadable

Similar Messages

Maybe you are looking for