Text Label Translation

I can select another language for the text labels (i.e.
Spanish) click OK and close. When I go back into the Text labels it
again defaults to English. Even when I change my computer default
language to Spanish I can only publish with English label.
Am I missing a file?
Is it vtextmapping.xml? If it is a missing file how do I get
the file?

Presenter's output shows up in the same language as is the OS
language.
To check your text labels, in say Spanish, you would have to
launch <contentpath>/viewer.swf?externLang=es.
This is just a hacky way to check out whether your changes
are correct or not. The audience is supposed to see the output in
the comfort of the language of the OS.

Similar Messages

How to stop text labels on numeric controls from disappearing

Got a nuisance problem I'd like to correct. When I've got a previously defined numeric control (such as a slide or knob) with text labels, upon entering the control properties window and selecting the "text labels" tab, the first label defaults to clear/empty. This is a nuisance because the text has to be retyped every time when modifying the text labels. Is this a bug or a feature? Is there any way to turn it off? Thanks.

"I've always wanted to be the first to discover a bug in a new LV release! "
Thank you for sharing that with us. You are helping to make LV even beeter than it is.
regarding your quote "I've always wanted to be the first to discover a bug in a new LV release! "
Please see the LabVIEW Champions Blog titled "The Leaders Lead" that can be found here.
http://forums.lavag.org/blog/champions/index.php?
How is your nose?
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

I just installed Firefox 29.01 and the text labels on my toolbar have disappeared and there doesnt seem to be a way to put them back. How do I do this?

MY QUESTION IS EXACTLY THE SAME AS THE USER BELOW ASKED (WHICH I HAVE PASTED BELOW), AND HE GOT A STANDARD (AND USELESS) RHETORICAL ANSWER FROM THE SUPPORT STAFF. PLEASE LOOK AT THE SPECIFIC QUESTION ASKED AND DO NOT ANSWER WITH A GENERIC ANSWER LIKE "THIS IS HOW TO ACCESS THE CUSTOMIZATION SCREEN" BECAUSE I FOUND THE CUSTOMIZATION SCREEN WITHOUT HAVING TO ASK AND THAT SCREEN DOES NOT SHOW HOW TO TURN ON THE FEATURE I NEED! DO YOU WONDER WHY I USE ALL CAPS? IF YOU READ THE ACTUAL QUESTION WHEN IT WAS WRITTEN IN LOWER CASE, I WOULDN'T NEED TO USE ALL CAPS!
Last night I updated to Firefox 29.0.1. Now, I don't mind change - and I don't mind redesigns - but I HATE it when options are removed. I want text labels on my buttons (the "Home" button for example"). In the previous version of Firefox you could right-click in the grey space at the top, and select "customise". From there, you could drag and drop which things you wanted to appear in your toolbar or not - and there was a tickbox to selext if you wanted text labels to appear underneath them or not. Now as hard as I look, I can't find this option. It looks like you're now forcing people to ONLY use icons. I hate that. My brain processes the word "Home" a lot faster than it recognises a little picture of a house. You need to understand that people work in different ways - and just because the Firefox developers might not personally use the text labels, that doesn't mean that no-one does!

I agree with whereitis above, I hate it when options are removed (ex: the Bookmarks side panel (Ctrl-B) button missing) etc.. Firefox's major BOLD one-liner is: CUSTIMAZATION. Now to regain this CUSTIMAZATION freedom, Firefox suggest to solve this by installing the ADDON "Classic Theme Restorer". I don't want to install any ADDON to customize Firefox! I went with Firefox because it was CUSTOMIZABLE, and that is the only reason why I went with this web browser! Now, Firefox is asking me to add an ADDON to CUSTOMIZE it. What is this?!

How can I hide a text label as I would a control or indicator?

As I have multiple indicators that must have the same identifier to the operator I can not use the indicator label as the items identifier. At times I want to hide the indicator and label. How can I hide the label? Please recall a text label just sits on the front panel as desired. It isn't within a raised or lowered box. In the attached sample I would like to hide "MyLabel" when the date indicator is hidden.
Attachments:
Test_Label.vi ‏35 KB

Here�s a way. Its a little involved, but it will work:
1. Customize a control or indicator to remove the border (I used a string control)
a. Right click on the control or indicator, go to �Advanced � Customize�
b. Click on the wrench on the tool bar to enter edit mode
c. Select the border and drag it off to the side
d. Reduce the size of the border to a single pixel (it won�t let you delete it)
e. Rubber band a box around the 1 pixel border to select it and use the cursor keys to move it within the �white space� of the string control. It will effectively disappear. You will NOT be able to move it with the mouse as LV will try to resize the border instead of moving it.
f. Using the color tools �suck up� the background color of your vi and �paint� i
t into the white space of the control.
g. Make the control the correct size to hide your label(s). Make sure it is right as you will NOT be able to resize the control outside of the �customize� function (i.e.: while on your front panel)
h. Click on the tweezers to go back to customize mode.
i. Give your control a descriptive name
j. Right click on the control, go to �Visible Items� and uncheck �label� to hide the label.
k. Save your new control
2. Back on your front panel, place your new control over what you want to hide and programmatically make it visible or invisible as desired.
I have included a copy of your original vi, modified to hide and unhide your label. I have also included the customized string control that accomplishes this. You may resize the control as needed by �customizing it as described above.
The only disadvantage to this method is that if you want to hide multiple labels they must be in the same area of the front panel. Otherwise you must have seve
ral �hiding� controls.
An advantage is that you will not have to make the original control or indicator (i.e.: the date indicator) visible or invisible as it can be hidden as well.
Hope this does what you want.
Good Luck.
Attachments:
Test_Label.vi ‏27 KB
InvisibleString.ctl ‏6 KB

How to change dynamically text label at run time in the forms

Hi,
I am having a form in which i want to change the text label dynamically. I mean when a certain condition match then text label should be change and when condition does not match then the text label should reamin as it is in the same form.
plz help
thanks in advance
azhar

Hi,
Use this code to change the label at run time.
set_item_property('deptno',prompt_text,'pagal dept');
Prompt_text is used for changing label at run time.

SQL Subscription field shows * only with Dynamic Text Label in SQL query

We are using Hyperion Analyzer 7.2.x for showing budget and actual data. I have to show this financial data based on the security e.g. person in IT can see only IT dept. data. Hence I want to use dynamic text label <<userid>> for the security based on the person logging in to Analyzer.
But when I use dynamic text label <<userid>> in the SQL query in SQL Spreadsheet, SQL Subscription field shows * only selection option. Does anyone have idea how to solve this problem?
Thanks in advance for your help.
-SV

Hi
Okay i know this is a bit crazy way.....but i think this is the solution for your issue.
Create a report without the where clause (<<useris>>) then add a filter (sql subscription) then you can find all the values that are there in the SQL field (try to increase the query limit it is set to 250 as default) then edit the spreadsheet and add the where clause (<<userid>>).
This will help you having the filter and the dynamic text label. I think there is an issue when you try to filter it with a where clause.
Hope it helps.
CK

Default UITableViewCell text label background color

I need a table view cell that just has simple text but with custom backgroundView images when not selected vs. selected. I'm too lazy to implement a custom cell, so I was using the regulation UITableViewCell, setting the backgroundView and backgroundSelectedView. The problem is for non-white backgroundView, when the cell is not selected, the text has a white box around it (the background color of the label containing the text, I assume), which looks horrible. When the cell is selected, the default UITableViewCell implementation takes care of changing the text color to white and text label background to clearColor and the custom backgroundSelectedView shows through beautifully. Is there a reason why the text label shouldn't just have a clear background color ALL THE TIME?? If the UITableViewCell is not customized for backgroundView, i.e., the cell background is white, the clear colored text label is no different from a white colored text label. If the backgroundViews are customized to non-white, a clear text label won't be in the way of the backgroundView showing through.
Does this sound like a good feature request?
How does one submit requests or bug reports for iPhone SDK anyways??
Thanks.

fitzyjoe wrote:
I am having this exact same problem right now. Did you have to subclass UITableViewCell to fix it?
I had the same problem and subclassed UITableViewCell to solve it. I set the backgroundView and selectedBackgroundView to UIView instances I wanted to use and then implemented setSelected:animated: in my subclass.
{code:}
-(void)setSelected:(BOOL)selected animated: (BOOL)animated {
[super setSelected: selected animated: animated];
for (UIView *view in self.contentView.subviews) {
view.backgroundColor = [UIColor clearColor];
{code}
Bit bruteforce and as Apple suggests this will impact table performance, but the tables I work with aren't that big and it works well so far.
It'd be nice if UITableViewCell honored backgroundView like it does selectedBackgroundView, i.e. when the backgroundView property is set keep the cell contents transparent.

Newbie question on text label change according to program

I managed to get the property of the gauge scale (range) changes according to the different measurements selected.BUT the thing is I could not get the text label change and display as differrent measurements is selected. Pls advise

Thanks Kim"
I managed to do it. Yes,the name label cannot be changed but the caption text is possible when selected.
I did it by right-clicking the property node in the REAR(block) diagram. I click on the property and set the caption text. It works now.
Include here a .jpeg file for other newbies!
Attachments:
pic1.jpg ‏51 KB

Missing "Charts, Images, Text Labels" demo from iWorks Numbers page.

Really just an issue with the number iWorks page on the website.
At the address below, Apple has a few watchable demos:
http://www.apple.com/iwork/numbers/
Intelligent Tables.
Flexible Canvas.
Charts, Images, Text Labels.
and
Interactive Print View.
But the hyperlink listed under "Charts, Images, Text Labels." is the same as the one under "Flexible Canvas."
Does anyone have the actual address that takes you to the "Charts, Images, Text Labels." demo?
for reference, here is the address that is duplicated:
http://movies.apple.com/movies/us/apple/mac/iwork/2007/features/iworkfeatures_flexiblemediarichcanvas_20070807640x400.mov
thanks!

The link below is now available from the iworks page:
http://movies.apple.com/movies/us/apple/mac/iwork/2007/features/iworkfeatures_2dand3dcharts_20070807640x400.mov
Thanks to who ever updated it.

Creating a button with a text label layer

Hi guys. Looking for any tips on how best to implement a button with a text label. I initially created a rectangle object on a lower layer and with text in the upper layer via type tool. When I group both objects and create the button the text is readable in my InDesign (document) computer screen but the minute I preview it on my iPad the button becomes unreadable and pixellated. I tried various approaches by moving the text layer outside the button group does not display the text at all. Has anyone run into this issue? If so what is the best practice? Thanks in advance.

Thanks for the insight Neil. Regarding my button design its nothing fancy. Its a rectangle box on one layer and a text label on another layer inside the rectangle object. What I'm trying to simulate is when the user taps on the button the click state will change colour to notify the user that they have activated an event and in this case a navto://...
The way I've implemented it is the rectangle is coloured pink [Normal] and when tapped the light pink [Click] toggles between both colours BUT my text label disappears.
See the screen shots below.

Hide text label in IR report section conditionally

Hi,
We have a textlabel and a computed field in a report section in IR 11.1.2.1. Is there a way(through scripting) to hide the textlabel and field based on certain conditions, like say, if the field computes to 'zero'?
Thanks.

Use a Field instead of Text Label. Then in the Expression Editor you can use if(){}else{} logic
HTH
Wayne

89xx/99xx Issues, Video mute, Line Text labels

A customer of ours purchased an entire solution on 99 and 89 series model phones. The customer didn't intend to use video on every call, just some calls. Reasons include remote site bandwidth, and privacy issues of course.
What we've discovered is that if video capabilities is turned on for these phones. EVERY call is initiated as video. We then found that in the camera settings of both models, you can turn off video capabilities at the start of the call. Good. Here's the problem: Both parties get a big ugly black screen to stare at, which they have to then minimize. But worse, we discovered that both phones are consuming bandwidth on the order of 20kbps on up to 180kbps just to display the big ugly box!
I'm hoping there's a better workaround, or plans to fix this issue. My suggestion is a toggle soft-key, or a settting option that disables video capabilities entirely until it is needed in call, or escalated in the call, preferably with a remote accept. Heck any video client avilable today works this way, why can't a purpose built video endpoint do the same? I can't beleive there's a customer out there that wants every single call to be a video call no matter what...but it appears these phone models think that that's the case. All or nothing? Any ideas?
The other issue is that only 1/3 of the screen is avialable for a line text label on these models. In particular, the 89xx only allows 11 characters. This means the 79xx luxury of displaying 'firstname lastname x1234' is no longer possible. Even a BLF with a name, there's no room! At best we are limited to a last name and extension, or in extreme cases, just the extension. Basically the line text label is unusable in many cases.

Hello all!
Thanks for your patience as you're watching this thread. I'm not making any real headway with TAC on this. Using the "call park application" and "service directed-pickup gpickup" commands in telephony-services (as recommended by TAC), I can get the SIP phones to pick up an actively ringing call from either SIP or SCCP phones, but that also limits the SCCP phones to same. I cannot use the Pickup softkey to recall/divert a call on Hold or a call on Park.
To be honest, I think we're going to have to wait until CME 11 is released and go back through the testing process all over again. That's assuming Cisco will have addressed these issues in the SIP firmware for the 78xx phones. I really wish Cisco would release SCCP firmware for these and the 88xx phones, but I know that their direction is away from SCCP to SIP across the board.
With the upcoming release of BE6KS, I see the death knell for CME solutions as the BE6KS will have the same interface/drivers/et. al. as full blown CUCM. I also see many of my SOHO customers going to other solutions as Cisco will more than likely end up being too complicated and over priced for the smaller environments.
Kevin

Engage 2008 Text Label Problems

I have text labels on a dashboard that when the swf file is displayed in a browser in full screen look fine.....as you start to resize the browswer there are times when the dashboard truncates those text labels instead of resizing them for display...if you resize the browser a bit smaller then they reappear...is there a way to make sure that these text labels never truncate and alway resize correct.y. I am using Engage 2008

That is a known issue because of the way the Flash Player scales text when then dashboard is not being displayed at exactly the same size (with and height) it was created inside Xcelsius.
We added a FlashVar that you can set in FP3.1 to tell Xcelsius to disable the scaling and display the size it was designed instead, or if you export to HTML the width and height are set for you in the HTML page.
See ADAPT01319531 (Height and width are not respected when a Flash object is resized) in the What's Fixed in Xcelsius 2008 Fix Pack 3.1.
Here is where to find the latest online docs: http://help.sap.com/content/bobj/bobj/index.htm
Regards
Mattt

I want to set text label and set filter value as header in query

i want to set any text label or i want to design query in such manner that whatever the value is selected by client in selection screen is become heading in query . like if i select posting date then that range should be displayed in heading portion of the query.
Edited by: Viral Shah on Jan 23, 2008 8:30 AM

Goto teh Query Description and select the Text variable Icon (yellow coloured). Create a Text variable with processing type as Replacement path and give the Characteristic as the posting date.
If you are having range then you need to create two Text variables one for FROM and other for TO. Use both the text variables in teh query description..

Transport ot text elements translation

Hi,
In SE63, I did translate some custom text elements of program SAPMP56T and able to save. But have no idea about how to transport these changes. While saving, I did not receive any prompt for transport request. I am working in SAP 4.6B and checked SE09 to find any transports created , but there was no transport related to translation.
Would appreciate help to resolve the issue.
With Regards,
Ravi

Hi All,
Finally I found way to transport text elements translation. Login Source language, here say EN and then from SE38, text elements screen , click on menu Goto -> Translation
This will take to SE63 screen, you can translate and then click save icon in SE63. Then click on back button to return to SE38 text elements screen. Here again click on SAVE button and that is all. All translation in French also included in this transport. However when you saved text elements in SE38, the message you will get is misleading , it says text elements saved in EN language.
When I transported this request to QA system, French translation of text elements moved to QA system.
I think this is problem in older versions of SAP say 4.6b and backwards. In 4.6C onwards, you have Transport recording option in SE63 .
WIth Regards,
Ravi

Text Label Translation

Similar Messages

Maybe you are looking for