Text memory not being cleared after SAVE_TEXT

Hi ,
I am using SAVE_TEXT function module ( along with SAVE_MODE_DIRECT = 'X') to write some data into the text elements of a Sales order during creation. This activity is being done in the SAVE_DOCUMENT method.
The problem is that once the text is saved to the sales order and I attempt to create a new SALES_ORDER using VA01, the old value ( from the already saved order) appears in the text elements.
I tried using FREE MEMORY ID ,but the same did not work.
Any thoughts on how I can flush the memory text.
Thanks,
Jasmit
<removed by moderator>
Edited by: Thomas Zloch on Jan 15, 2012 9:40 PM

Hi All,
I tried with refreshing the table, using the SAVE_MODE_DIRECT ='X' and blank, but the issue still persists.
I was under assumption that SAP might be clearing the text memory before every new transaction and then initiating the text determination procedure. However, this does not looks like the case..
Any thoughts on alternate solutions.
Regards,
Jasmit

Similar Messages

My 4S has stopped ringing. Voicemail's disabled but if you call me, you'll hear it ring your end but it does nothing at mine and freezes if I make a call. Texts are not being delivered or coming through delayed. Ringer is on, tone enabled - help!

My iPhone 4S has stopped ringing altogether. Voicemail is disabled but if you call me, you'll hear it ringing at your end but it does nothing my end and freezes in the phone app if I make a call (doesn't ring or connect and doesn't freeze the phone, just the calling part). Texts are not being delivered or coming through delayed. Ringer is on, tone enabled - help!
I've disabled roaming so it only runs on wifi (this after getting a £4k phone bill...) and I can use Skype, Viber and WhatsApp with no problem at all.
Would really appreciate any help at all!
Many thanks.

Hi there - am with Orange and they said nothing wrong with account and service running normally. They said if they had cut me off I would've received a text (debatable with current message receiving situation!) and when I called out it would say 'calls from this number are barred'. Also if you called me it would say something similar. But it doesn't, it will ring and ring until it rings off but nothing happens at all on my handset. Not even a missed call notification. If I call out, it will display that it is calling the number but that's it. If I cancel the call it will constantly display 'ending call'. If I come out of the phone and go to another app then revist phone it will start calling that last dialled number - without ever getting as far as ringing or connecting.

Item Texts Is Not Being Created in BAPI_BILLINGDOC_CREATEMULTIPLE

Hi.
I am Using Bapi TO Create Invoice, Every thing is created successfully , but item text is not being created. Code is as below.
DATA: s_vbap TYPE vbap,
            t_billing TYPE STANDARD TABLE OF bapivbrk WITH HEADER LINE,
            t_datain TYPE STANDARD TABLE OF bapikomfktx WITH HEADER LINE,
            t_return TYPE STANDARD TABLE OF bapireturn1 WITH HEADER LINE,
            t_success TYPE STANDARD TABLE OF bapivbrksuccess WITH HEADER LINE.
      SELECT SINGLE * FROM likp
      WHERE vbeln = v_del_doc_no.
      SELECT SINGLE * FROM lips WHERE
      vbeln = v_del_doc_no.
      t_billing-salesorg = likp-vkorg.
      t_billing-ref_doc = likp-vbeln.
      t_billing-ref_item = lips-posnr.
      t_billing-doc_number = v_del_doc_no.
      t_billing-itm_number = lips-posnr.
*      SELECT SINGLE fkarv FROM tvak
*            INTO t_billing-ordbilltyp
*            WHERE auart EQ zsoa_so_header-auart.
      SELECT SINGLE auart FROM vbak
                  INTO t_billing-ordbilltyp
                  WHERE vbeln EQ order_num.
      t_billing-price_date = sy-datum.
      t_billing-ref_doc_ca = likp-vbtyp.
      t_billing-material = lips-matnr.
      t_billing-plant = lips-werks.
      APPEND t_billing.
      BREAK-POINT.
      CLEAR: t_datain.
     t_datain-ref_doc = v_del_doc_no.
      t_datain-ref_item = '000010'.
      t_datain-applobject = 'VBBP'.
      t_datain-text_id    = '0001'.
      t_datain-langu      = sy-langu.
      t_datain-format_col = '*'.
      t_datain-text_line = 'FSG 2829'.
      APPEND t_datain.
      CALL FUNCTION 'BAPI_BILLINGDOC_CREATEMULTIPLE'
        TABLES
          billingdatain = t_billing
          textdatain    = t_datain
          return        = t_return
          success       = t_success.
      CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
        EXPORTING
          wait = 'X'.
      LOOP AT t_return.
        itab_msg-type = t_return-type.
        itab_msg-msg = t_return-message.
        APPEND itab_msg.
        CLEAR itab_msg.
      ENDLOOP.
      READ TABLE t_success INDEX 1.
      p_i_bill_doc = t_success-bill_doc.
    ENDIF.
ENDIF.
CLEAR: itab_so_items, itab_so_items[] , delivery_no , itab_return[].
So Text FSG 2829 is not being created in Item Text.....

Hi Tahir,
You can check with the below thread
A question of BAPI_BILLINGDOC_CREATEMULTIPLE
Regards,
Pawan

Bursting - empty tag not being cleared in email channel loop

If you check the following, I pass the cust num and email address to the email delivery channel for the subject line.
<xapi:message id="222" to="[email protected]" attachment="true" subject="Unigas Statement to be emailed to ${CUST_NUM} to ${EMAIL}">
Problem is, that if the cust num or email address tag is empty, the previous tag value is used! its like its not being "cleared" between bursting loops.
Using 5.6.3 EBS.
Rob
http://www.scnet.com.au

Since your email is failing I am going to assume the rest of your script is working. So I am looking specifically at these lines:
$process = '../includes/process_mail.inc.php';
if (file_exists($process) && is_readable($process)) {
include($process);
The things that need to be confirmed here are that the path is right and it has proper permissions. Have you tried eliminating that "and" statement in your "if" and see if those work independently. I have a feeling that if the path is right that the file does not have the proper permissions on your server for global read access which would make, "is_readable" fail and thus end your script.
Can you test those and post back?

Pictures are not being delivered after saying delivered on iMessage.

Pictures are not being delivered after saying delivered on iMessage.
Txting through iMessage works fine. Pic's won't send.
I turned on and off everything and did all the necessary trouble shooting.
I'm on a Verizon 4S. and I'm sure Verizon has nothing to do with iMessage system, since it's on its on server.

bump

So I have been creating a logo for my company and it came out great. The problem is, when I format it for PNG or when I want to use it on freshbooks or my webpage, the image becomes blurred and the text is not as clear. How do I fix this?

So I have been creating a logo for my company and it came out great. The problem is, when I format it for PNG or when I want to use it on fresh books or my webpage, the image becomes blurred and the text is not as clear. How do I fix this? Is it because the text get shrunk?

This is how it looks on adobe illustrator

Cookies are not being cleared when I close the browser although the option is set. Any suggestions?

Under Options; Privacy I have Clear history when Firefox closes ticked and within the Settings for Clearing History I have Cookies ticked. Cookies are not being cleared when I close the browser. Windows 7, SP1 x64

If clearing the cookies doesn't help then it is possible that the file cookies.sqlite that stores the cookies is corrupted.
Rename (or delete) cookies.sqlite (cookies.sqlite.old) and delete cookies.sqlite-journal and cookies.txt, if they exist, in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder] in case the file cookies.sqlite got corrupted.
* http://kb.mozillazine.org/Cookies#Removing_cookies

Accounts (Freight Cost) in GR not being cleared

Hi SAP gurus,
There are postings done in a Material account 3xxxx in which the Freight purchase was charged in the Service account 4xxxx.
However, 4xxxx is not being cleared during the period end.
Would it be any setting in the PO or FI that is causing this?
Regards
Roger
Edited by: rogersapfinance on Nov 13, 2009 6:29 PM

Hi,
Please check if the PO no and PO item ae populated in teh Frieght cost account in case yes you can use F.13 to clear this using GR/IR clearing process in the transactions. If it is not populated please look for things common between the Dr and CR and you can define your own rule to clear the Accounts the setting is to be made under SPRO>FI>GL>Business transaction>Open item clearing >Prepare Automatic clearing.
Regards
K.R

My texts are not being delivered to iPhone operators as an iMessage, only to non iPhone operators?

My texts are not being delivered to iPhone operators as an iMessage, only to non iPhone operators?

Check that iMessage is turned on in Settings > Messages and that the Apple ID in Settings > Messages > Send & Receive is correct, along with your phone number and email account(s).

My outgoing texts are not being recieved. How do I fix this?

I got my iPhone a few days ago and I am my texts are not being received. Any suggestions?

Apple has a pretty comprehensive trouble shooting guide in Mail Setup, Troubleshooting etc..

MIGO receiving not being cleared

Hello,
We are receiving items against MIGO (101) and we are checking each item as received. However the items are not being removed from the MIGO when we re-enter the purchase order. The items are showing as received but not cleared from MIGO. I vaguely remember having to check some boxes in MM02 but I don't remember exactly where. Please help.

If anyone runs into this problem, it is the driver. You need to install the latest driver from Zebra. I had the same problem. After I installed the driver, the problem disappeared. Hopefully this will save you a lot of time.

Document not auto cleared after performing FF67

Hi all,
firstly i would like to acknowledge that i'm using version 4.7.
after performing FF67, bank recon document generated in main bank & clearing bank GL accounts. But it is not auto clear in the clearing bank GL account. the treatment is as post GL account & manual clear.
after checking:-
1. trans type ABC using int. algorithm 15 - use assignment field to clear.
2. posting type in posting rule is 4 - clear debit GL account
in FF67 screen variant, assignment field entered the same as assignment value in clearing bank account. by right, the documents will clear off automatically.
anyone can assist what else that i miss out?
thanks in advance.

hi..
we can perform manual clearing or F.13, but the pupose of having such posting rule and posting type is to minimize steps of clearing.
by right, once ff67 posted, the clearing bank gl account will get cleared.

Texts are not showing up after upgrading to version 11

Could someone help me with why some of my texts are not show up on my Flash project? Before the upgrade, everything is fine. However, after upgrading to version 11, my texts are disappearing.
Before (version 10.3.183.7...)
After (version 11.0.1.152...)
The texts in the boxes will disappear, when I hover mouse cursor over it. Those boxes with texts in them are created with an external AS file, and the texts are dynamicaly changed/put in with an external XML file. There is a mask on the boxes, show only 4 at a time.
Demo: www.ethanslin.com/portfolioWorks/flashWorks/demo/
You will see the changes with Flash player version 11, and everything working fine with older versions.
I use iMacs with Snow Leopard and Lion, and this happens on all of the browsers with Flash Player version 11.01.152. I also tested on Windows 7, and it is still happening. Is this a Flash Player bug or something changed that I am not aware of? Is there a work around for this?

This is a known issue and we have a fix for this in our next release. Thanks for posting.

Will Installing more RAM improve performance, IF laptop has "available memory" not being used?

My laptop has 2x 1GB of RAM.
Right now, and usually, The Physical Memory shown in Task Manager, shows that there is "available memory" (currently it's 500megs worth). (And "system cache" says 300megs.)
There is also, right now, 2.5GB of page filing being used.
If I were to replace the 2GB of RAM with 4GB (of the same Mhz), would there be a noticable increase in performance?
(windows XP 32bit OS)

A matched set of DDR2 ram will perform a lot faster one memory not matched. Its required for the double data rate to work. Hence 2+2 is the max you'd need/want in a 32bit machine. Windows 7 was built for large memory footprints. XP was built to run just barely in 64MB but really needed a min of 128MB to support a network connection and printing. It was never enable to truely go a whole lot further than a few machines built capable of 1GB. There was even a bug which was patch causing problems if a !GB or more was available. Just because it can see it does not mean it actually uses it !! The kernal by default is swapped in/out of ram even in larger memory systems. Why, it was is not aware of the extra memory and does not change its behavour from a 512MB machine.
As for the 1333Mhz ram the timing may be faster than the other memory used. Hence it flow the data faster on the bus. Fewer delays in various cycles including the RAS/CAS etc but thats all under the hood so to speak.
T520 Model 4239 Intel(R) Core(TM) i7-2860QM CPU @ 2.50GHz
Intel Sandy Bridge & Nvidia NVS 4200M graphics Intel N 6300 Wi-Fi adapter
Windows 7 Home Prem - 64bit w/8GB DDR3

Seagate portable drive not being recognized after OSX10.9.2

After I installed the 9.2 update, my Seagate portable external drive is not being recognized - doesnt show up in Finder, or Disk Utility, but I know the drive is live, as I can feel it vibrating
Someone please help, all my time machine backup is on that

I had the same issue - the Seagate drive is in a format that will recognize both Windows and Mac formats and there seems to be a flaw with Seagate. After working on this for five hours and finally calling Apple, I found out why. If you reformat to Mac OS extended journaled then they usually start working properly.
When I contacted Seagate they said it was best if you are just using a mac to just use the Mac formatting.
Hope this helps and good luck. Hope there wasn't any valuable data on the drive.

Text memory not being cleared after SAVE_TEXT

Similar Messages

Maybe you are looking for