Text shifts slightly at end of fade-in and at the start of fade-out

Hi, I have created text with a crossfade at both ends. I find that my text jitters a bit at the point where the fade-in ends AND at the point where the fade-out begins. How can I get rid of that slight shift?
Thanks, Bob

Hi Tom, I am working in standard DV, and viewing the jittery text straight off the timeline. By your question, I am starting to assume that this problem may disappear when this project is eventually burned on a disk and viewed on a TV?
By the way, thanks for all your generous help. I hope you realize that you are saving a lot of people from going crazy. I wish I knew your address, and could send you a gift.
Bob

Similar Messages

How do I fix my left shift key? Any open windows leave and make the desktop visible.

How do I fix my left shift key? Any open windows leave and make the desktop visible. I have tired to go into system preferences and reset all of the keyboard settings to default but the issue hasn't gone away.

You are not running as administrator, I think, which may be required and the only way to properly work and register. Also check for compatibility mode settings, UAC and DEP, all of which may require to be adjusted for a legacy app like PS CS2 to run properly. Also turn off Aero and switch to a conventional visual theme. The brush issue may be related to that or is a more generic problem with your graphics card and mouse config, but since you didn't provide any info on that, it will be hard for anyone to advise.
Mylenium

How do i launch Adobe Reader,accept the end user agreement,quit,and relaunch the browser?

How do i launch Adobe Reader.accept the end user agreement,quit,and relaunch the browser?

Find the Reader application (same place as all your other apps. Not sure where that is since we don't know your OS) and launch it.

On our 1-employee farm (plus me), we communicate by texting - I use a 4s, can I store and review the txts on my MacBook

On our 1-employee farm (plus me), we communicate by texting - I use a 4s, can I store and review the txts on my MacBook & iPad2? On my iPhone?
TIA,
Allan

You'd need third-party software like this:
http://www.ecamm.com/mac/phoneview/

Since I downloaded the newest update, my phone only rings or makes text sounds about 10% of the time. It can be sitting in front of me and a call or text comes in. No sound, just a msg on the screen. Anyone out there having that problem?

Since I downloaded the newest update, my phone only rings or makes text sounds about 10% of the time. It can be sitting in front of me and a call or text comes in. No sound, just a msg on the screen. Anyone out there having that problem? It's not a problem in the settings as I set the rings and tones I want. The rare one comes thru with sound. I never had any problems before update.

No, sounds like when you dropped it an cracked the screen it may have also damaged the logic board or the repair person damaged a cable.

How do I read from a text file that is longer than 65536 lines and write the data to an Excel spreadsheet and have the data write to a new column once the 65536 cells are filled in a column?

I have data that is in basic generic text file format that needs to be converted into Excel spreadsheet format. The data is much longer than 65536 lines, and in my code I haven't been able to figure out how to carry over the data into the next column. Currently the conversion is done manually and generates an Excel file that has a total of 30-40 full columns of data. Any suggestions would be greatly appreciated.
Thanks,
Darrick
Solved!
Go to Solution.

No need to use nested For loops. No need for any loop anyway. You just have to use a reshape array function. The picture below shows how to proceed.
However, there may be an issue if your element number is not a multiple of the number of columns : zero value elements will be added at the end of the last column in the generated 2D array. Now the issue depends on the way you intend store the data in the Excel spreadsheet : you could convert the data as strings, replace the last zero values with empty strings, and write the whole 2D array to a file (with the .xls extension ) using the write to spreadsheet function. Only one (minimal) problem : define the number of decimal digits to be used;
or you could write the numeric array directly to a true Excel spreadsheet, using either the NI report generation tools or ActiveX commands, then replace the last elements with empty strings.
We need more input from you to decide how to solve these last questions.
Message Edité par chilly charly le 01-13-2009 09:29 PM
Chilly Charly (aka CC)
E-List Master - Kudos glutton - Press the yellow button on the left...
Attachments:
Example_VI.png ‏10 KB

GRC: Negative ack; PI: End tag 'enviNFe' does not match the start tag 'NFe'

Bom dia SAP Boosters!
Como muita gente estou aqui brigando com o GRC NFe. Esse forum tem resolvido meus problemas, até agora. Por isso inicio um novo tópico pois estou tendo o seguite problema que nao encontrei resposta:
O grc e o pi estao em servidores separados. Do lado do grc, na sxmb_moni mostra para a interface BATCH_nfeRecepcaoLote_OB erro no acknowledgement status. abrindo o item error do ack msg id aparece:
<SAP:Error SOAP:mustUnderstand="" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="BPE_ADAPTER">NEGATIVE_ACKNOWLEDGEMENT</SAP:Code>
<SAP:P1></SAP:P1>
<SAP:P2></SAP:P2>
<SAP:P3></SAP:P3>
<SAP:P4></SAP:P4>
<SAP:AdditionalText></SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace=""></SAP:ApplicationFaultMessage>
<SAP:Stack>Negative acknowledgment triggered by a process</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
No lado do PI, ao consultar esta interface e abrir o payload do item Request Message Mapping, aparece a mensagem de erro: End tag 'n0:enviNFe' does not match the start tag 'NFe'. e todo o xml fica em uma linha só.
Voltei entao no xml do sender e de fato encontrei a tag NFe, onde deveria constar os dados das notas fiscais, sendo aberta mas nao sendo fechada, e sem dados, desse jeito.
<?xml version="1.0" encoding="utf-8" ?>
- <n0:nfeRecepcaoLote2 xmlns:n0="http://sap.com/xi/NFE/006">
<n0:cUF>35</n0:cUF>
<n0:tpEmis>1</n0:tpEmis>
<n0:tpAmb>2</n0:tpAmb>
- <n0:nfeDadosMsg>
- <n0:enviNFe versao="2.00" xmlns:n0="http://www.portalfiscal.inf.br/nfe">
<n0:idLote>000000000000025</n0:idLote>
<n0:NFe asx:root="" xmlns:asx="http://www.sap.com/abapxml"></n0:NFe>
</n0:enviNFe>
</n0:nfeDadosMsg>
</n0:nfeRecepcaoLote2>
Alguém já viu esse bug? estou com grc 10 e SP 08 e das notas que sairam depois nenhuma fala disso.
Obrigado.

Fiz um teste que parou de dar erro de acknowledgement e chegou a enviar o lote para a sefaz, que retornou erro de schema porque o xml continua vazio:
Na interface determination gerada quando criei o cenário NFE_BATCH_WebAS_Outbound_Batch, a que contém a interface BATCH_nfeRecepcaoLote_OB, tirei o operation mapping BATCH_nfeRecepcaoLote2_TO_nfeRecepcaoLote2. Embora não seja mais retornada a mensagem de erro na tag, o payload continua no mesmo formato postado acima. Entao coloquei de volta.
Bem, pesquisando vi que a função que gera o xml é a /XNFE/006_SIGN_NFE_OUT. As notas aparecem como assinadas no monitor do grc, mas vou ter que ver entao como esta ocorrendo a geraçao do xml por esta funçao, certo?

Can't adjust end of background music..only the start adjusts

Struggling to edit my background music on my video in iMovie 11.
I can select the position of the start but not the end...any ideas?
Thanks
Neil

Hey, thank alot, it worked like a charm, BUT another problem just popped up, I used trapcode shine as an effect on the paint splatter layer, since i used your "set matte" the splatter doesn't get affected by the trapcode effect.

Am not asked if I want to save tabs at the end of a session and therefore the tabs are lost

I work on a Mac. With firefox version 3.6 when I hit "quit firefox" a window opened asking if I wanted to save my tabs. Clicking "save session" saved my open tabs for the next session. With firefox version 4.0.1 no window opens and the session ends. The next session begins with only my home page open. How can I save my open tabs in this version?

Firefox 4 saves the previous session automatically, so there is no longer need for the dialog asking if you want to save the current session.
You can use "Firefox > History > Restore Previous Session" to get the previous session at any time.
There is also a "Restore Previous Session" button on the default <b>about:home</b> Home page.
Another possibility is to use:
* [http://kb.mozillazine.org/Menu_differences Firefox > Preferences] > General > Startup: "When Firefox Starts": "Show my windows and tabs from last time"
Make sure that you do not use [[Clear Recent History]] to clear the 'Browsing History' when you close Firefox.

Your instructions for recovering your profile with all your info (for vista) is not working on my end, when I copy and pasted the line in the start menu it came up with no hits...

When I tried to recover my profile (I am going to be reformatting and wanted to save my bookmarks and passwords) the line in your help that I was supposed to type into the start menu came up with zero hits, if you could let me know what the problem may be I would appreciate it, thanks!

Firefox will not appear in the Market for most phones with incompatible hardware. You can check if your phone is supported here:
https://wiki.mozilla.org/Mobile/Platforms/Android
Even on some supported devices, a bug in the Market software prevents Firefox from showing up. This may be related to the fairly recent Android Market app update. If you go to Settings/Applications/Market and choose "Uninstall" you can uninstall the update, and then search for and install Firefox from the marketplace.
Or, if you have a supported phone, you can download the app directly by typing this address into your phone's browser: http://bit.ly/fxbeta3
(Note: To download the app directly for an AT&T phone, you will have to search for instructions on "sideloading" the APK file, since AT&T disables the option to install from non-Market sources.)

How do I adjust my titles so they don't fade in and out? I have hundreds of photos/videos on screen for a second or so each, for a year-long birthday video, and I need the dates in my titles to be steady rather than fading in and out spastically.

I have been working on a project since December of 2012 for my son's first birthday. Basically, it's a photo or quick video each day of his life so far. I used the "upper" title and made the titles not fade in and out, because that could give someone a seizure. The idea is a seamless title that ticks away each day. But in the new iMovie, it changed my settings, and I can't for the life of me find how to change them back.
Now, each date flashes in and out, in and out, in and out. Fractions of seconds go by. It's really distracting and annoying.
How do I get the titles to remain on screen and not fade in and out? I had it just how I wanted it, but now we're rapidly approaching my son's birthday, and the video is suddenly a mess.
How do I fix this?

I am working with the very same concept for my project and the auto fade in and out has messed everything up. If I hear or a fix I'll be sure to reply here to let you know!

RFC to read the attachment from PR05 and pass the doc to the PHP front end

Hi Team,
Our requirement : We are designing a new front end using PHP portal and pull the data from SAP-backend for travel expense/request.
We are able to upload the document to PR05 using frontend portal.
If employee/manger wants to read the attachment in the portal,how to get the documents attached in PR05 to the front end..
I would like to know the RFC which help me in reading the attachemnts.Regards,
Madhu

I dont want use all the values in my second program I need to pass empno and job only.Since your cursor gets all the columns (using the * is not a good way to code the cursor), that is what your other program will get when it calls pr_test procedure. You will have to FETCH all the columns in that other procedure and discard the ones you do not need.
Alternatively, change the code of cursor to select only the columns you would actually need.

In Textedit, how do I copy a hyperlink url, but only copy the link location and not the link text?

Suppose I have a list of hyperlinked internet URL's. I want to extract their Internet addresses -- the link locations -- which are essentially hidden in the link text. Is there any way to select and copy the list of hyperlinks, but only copy the link locations, and not the link text?
For example, with the links:
The White House
Google
One of my previous posts
What I really want to copy are: "http://www.whitehouse.gov/", "http://www.google.com/", and "https://discussions.apple.com/thread/2737556".

I figured out how to do it. First, copy the hyperlinks onto a blank RTF document in TextEdit and save the file.
Second, open the file from within TextEdit, and make sure that the box "Ignore rich text commands" is checked in the open file dialog box. In the open document, the hyperlinks from my example in my first post will look like this:
{\rtf1\ansi\ansicpg1252\cocoartf1038\cocoasubrtf360
{\fonttbl\f0\froman\fcharset0 Times-Roman;}
{\colortbl;\red255\green255\blue255;\red0\green7\blue232;}
{\info
{\author Garald P. Weller}
{\*\copyright Garald P. Weller}}\margl1440\margr1440\vieww20000\viewh14400\viewkind0
\deftab720
\pard\pardeftab720\sa240\ql\qnatural
\f0\fs24 \cf0 \
\pard\pardeftab720\sa240\ql\qnatural
{\field{\*\fldinst{HYPERLINK "http://www.whitehouse.gov/"}}{\fldrslt \cf2 \ul \ulc2 The White House}}\
\pard\pardeftab720\sa240\ql\qnatural
{\field{\*\fldinst{HYPERLINK "http://www.google.com/"}}{\fldrslt \cf2 \ul \ulc2 Google}}\
\pard\pardeftab720\sa240\ql\qnatural
{\field{\*\fldinst{HYPERLINK "https://discussions.apple.com/thread/2737556"}}{\fldrslt \cf2 \ul \ulc2 One of my previous posts}}\
Third, use the Automator function, "Get URLs From Text," to create a service, which I called "Get URLs From Text," that receives text from any window, gets the URLs, and copies the result to the clipboard:
Fourth, select the entire page above, and go to TextEdit > Services to activate the "Get URLs" service.
Fifth, create a new TextEdit document, and paste the result.
The output is exactly what I wanted, the URLs -- i.e., the link locations -- of the three web pages, without the link text.
Another utility that will extract URLs is CopyPaste Pro, which has an innate ability to extract Internet addresses from either web pages or text pages.

What is the second cross-fader below volume fader?

When adjusting volume with volume keys, I touched the cog icon at right and second fader is showon below the volume level fader.
What is this?

Hello Sreekanth,
See this blog [Generic Extraction via Function Module|/people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module]
Also see this
[Line Item Level Data Extraction for Financial Accounting and Controlling|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a7f2f294-0501-0010-11bb-80e0d67c3e4a]
Thanks
Chandran

Safari won't let me click in text box, page shifts slightly instead

I am somewhat new to Apple computers having used Windows PCs for the last 25 years. However, since about Dec we have been an all-Apple household (1 MacBook Pro, 2 iPads, 1 iPhone, 1 iMac, 3 iPods). As a result, I am still getting up to speed on certain behaviors in Mac apps as well as the OSX Snow Leopard and Lion operating systems.
One thing I have not been able to figure out: sometimes in Safari when I try to click in a text box (such as entering a search term in Google), the page will "wiggle" to the right (sort of like it is trying to go back but can't) and the cursor will not change to an I-beam. Instead, it will persist as an arrow. When I try to click, the page keeps trying to shift to the right. However, if I wait a few seconds, the page will nudge itself back into position and I can then click in the text box as normal. This seems to be a "feature" of Safari, but I can't figure out what it is trying to tell me. I also have not checked to see if the same behavior occurs with Firefox or Google Chrome, so I don't know if this is a browser-specific behavior, or something common to all browsers and part of the Apple OSX operating system.
I have a magic mouse, if that makes any difference, and I do realize that swiping left or right will act as a page fwd/bkwd command. However, the issue above occurs when left-clicking...not when swiping.
Thanks in advance for any advice!

Hopefully it's a cache issue not your Magic Mouse.
Quit Safari.
Go to ~/Library/Caches/com.apple.Safari
Move the Cache.db file from the com.apple.Safari folder to the Trash.
Relaunch Safari.
This seems to be a "feature" of Safari
No.. it's not.

Text shifts slightly at end of fade-in and at the start of fade-out

Similar Messages

Maybe you are looking for