Textinput in all the colums of the first row of datagrid

Hi
i need Textinput in all the colums of the first row of
datagrid.
can ayone tell me the solution..
Thx in advance.

This will not be easy. i see two possible solutions.
You could use a custom itemRenderer. This will require that
you find some way to identify the dataProvider collection index
from within the renderer, and set the renderer to editable when
that index is 0.
Or you could create a composite component using two
dataGrids, one with a single row for the editable columns. There
are examples available on combining two DGs this way.
Again, this will be difficult, so be sure that it is
absolutely required and consider some other UI approach if posible.
Tracy

Similar Messages

How to restrict the default selection of first row in ALV in Webdynpro

Hi Experts,
In webdynpro i used ALV to display the bulk amount of datas under a view container. While running it ll cme by default selection on first row. how to restrict that.....

Hi Vimal,
Whenever we create nodes then by default the Initialization lead selection property of node is always checked. That why in the alv by default the first row is selected.
To restrict this default selection just unchecked the Initialization lead selection property of your node.
Regard
Manoj Kumar

Defaulting the colum from the previous page table column values.

Hi,
I have two seeded pages. In First page it contains one table and 4 columns namely SNo, Competency, Previous Rating, Main Appraiser Rating and in second page it contains one table and 3 columns namely SNo, Competency, New Appraisal Rating.
My Requirement is in First page Main Appraiser Rating column data(it contaions 13 rows), i have to show it in the second page column New Appraisal Rating by default. Please let me know how to achieve this.
Thanks in Advance,
Regards,
Suresh.

Suresh,
Is the second page is also seeded??
Create a new region it would be table region with the column which you want to show.
What you have to do is that you have to execute the VO in the Process request of 2 nd page. You have to check the logic like on which condtion it is showing 13 rows and you have to write the same logic in new VO and execute the query depending upon like on employee id.
Thanks
--Anil

How to mark a line in between the colums of the section

i have 3 columns in the section in pivot table
i want like 1st column
2nd column
3rd column is this is possible in pivot table...... colud any body please help me in this

Hi user12255470,
there are quite a few options you have with data in the section of the pivot table.
Let me highlight a few that will allow you to complete your fomatting as show below
1) Click on your second column's properties and select "Place Value in New Row". This will put in a line break.
2) Click on your third column's properties and select "Place Value in New Row". This will had a line break.
3) Click again on the third column's properties and go to Format Value. Here you can add a border at the top
Hope this helps and if you find this post useful, please award points.
Best regards,
-Joe

How to get first row from View Object cache.

hi,
I am using Jdeveloper 11.1.1.6
can we get first row from View Object cache??
Thanks in Advance.
Best
Shashidhar

Hi Frank,
Thanks for reply!!
My case is:
I have a Query based ViewObject.
One of the field is LOV and remaining fields are in ADF table. the LOV field is out side ADF table when i insert first record in ADF table and i choose LOV filed the value is selected.
when i create second row LOV value got refreshed because both are in same VO.
I need to get the LOV value of first row and set same value to second Row.
Shashidhar

Assessable Value and Wrong Value in SEcess in first row in J1IS

Hi,
This is a scenario of Vendor Return when we are returning multiple excisable materials to Vendor.
I have created Return Delivery using movement type in MIGO with choosing the option Part 1 only.
In J1IS,
The First problem is the assessable value which is coming wrongly as 111.11 whereas the gross value of the material is Rs. 100 only with Excise Duty 10% BED, 2% ECess and 1% SEcess & 2% CST.
The second problem is
The duty values are showing correct in the screen e.g., BED 10, ECS 0.2 and AT1 0.1 (according to gross value 100, 10% BED, 2% ECess and 1% SEcess )
There are total five items with the same gross value and other duties (gross value 100, 10% BED, 2% ECess and 1% SEcess)
But as soon as the transaction is saved, the AT1 value against first row changes wrongly from 0.1 to 0.6 and the same is flowing to the table.
Can any one provide some idea to resolve this?
Thanks in advance

Hi,
Please check my previous reply on this "Get Excise Invoice" problem thro' the link provided below.
Re: J1IS: u2018Get Excise invoiceu2019 not showing any values
Regards,
Siva

ADF Faces: Initially checking (radio) table's first row programatically

How can I initially check table's first row radio button programatically (from the backing bean)?
Setting current row in the iterator to be first row does not help. af:table attribute selectionState is set to bindings.PersonInformationPersonCustomers.collectionModel.selectedRow, however model is tree based - value="#{bindings.PersonInformationPersonCustomers.treeModel}"

why don´t you add on SQL Statement of your View Object an clause order by
the first row will show as the first row of you VO can view
but you can know the value of your field or your radio with a binding
open your JSP on Design view
with the right button
click on the component, your radio.
last option, Properties
at the param Binding you choose the BackingBean (or ManegedBean) and defined the name
does that you can use the name to invoke the method getValue()

Ok, I have deleted EVERYTHING off my 16gb ipad. Photos, music, apps. All I have are the standard apps. It says I have used 11gb and only have 1.6 left. When I first bought it I had up to 4 movies and lots of apps, no problems. What's going on please!?

Ok, I have deleted EVERYTHING off my 16gb ipad. Photos, music, apps. All I have are the standard apps. It says I have used 11gb and only have 1.6 left. When I first bought it I had up to 4 movies and lots of apps, no problems. What's going on please!?

How much space is used by your Other? You may be able to reduce.
How Do I Get Rid Of The “Other” Data Stored On My iPad Or iPhone?
http://tinyurl.com/85w6xwn
With an iOS device, the “Other” space in iTunes is used to store things like documents, settings, caches, and a few other important items. If you sync lots of documents to apps like GoodReader, DropCopy, or anything else that reads external files, your storage use can skyrocket. With iOS 5/6, you can see exactly which applications are taking up the most space. Just head to Settings > General > Usage, and tap the button labeled Show All Apps. The storage section will show you the app and how much storage space it is taking up. Tap on the app name to get a description of the additional storage space being used by the app’s documents and data. You can remove the storage-hogging application and all of its data directly from this screen, or manually remove the data by opening the app. Some applications, especially those designed by Apple, will allow you to remove stored data by swiping from left to right on the item to reveal a Delete button.
 Cheers, Tom

In my i phone 4s all the notification sounds come first.after 4-5 seconds the msg,facebook notifications etc.seems to appear on the screen.But earlier the problem was not there.Earlier with instant sound the notifications were there on the screen.how to S

in my i phone 4s all the notification sounds come first.after 4-5 seconds the msg,facebook notifications etc.seems to appear on the screen.But earlier the problem was not there.Earlier with instant sound the notifications were there on the screen.how to Sort out the Problem?

No, sounds like when you dropped it an cracked the screen it may have also damaged the logic board or the repair person damaged a cable.

I've tried to update my i-Tunes version after the site suggested I should following my i-Pad being plugged into it for the first time. The update seemed successful but the program would not open at all despite switching off the PC and re-starting several

I’ve tried to update my i-Tunes version after the site suggested I should following my i-Pad Air being plugged into it for the first time. The update seemed successful but the program would not open at all despite switching off the PC and re-starting several times. I then tried wiping the original software from the computer and re-downloading from scratch. Each time I tried the download failed with a message saying “Service “Apple Mobile Device” failed to start. Verify that you have sufficient privileges to start system services” At this stage, the only way forward was to “abort” the download. This I have done now four times and the same thing happens. When I did finally manage to get an i-Tunes shortcut on my desktop, the program wouldn’t open saying: “i-Tunes was not installed correctly. Please re-install i-Tunes. Error 7 (Windows error 193)” Any ideas to resolve this?

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

I am having the problem when trying to take a panorama picture. It may only take the first frame or doesn't even start at all when I press the shutter button. even though when i hold the phone straight up and down, so that camera is at the top

I am having the problem when trying to take a panorama picture.
It may only take the first frame or doesn't even start at all when I press the shutter button.
even though when i hold the phone straight up and down, so that camera is at the top on the back and the home button is on the bottom on the front.
This problem is irritating me....?

To take panorama
- ensure that the panorama option is on
- press the shutter button once
- you will see a line with an arrow
- move around in a circle ( I keep the camera steady and turn myself around in a circle)
- as you do this you will see the arrow moving across the screen as it captures pictures
- at the end of the capture, you will be able to see your panorama picture
I hope that this helps, do report back.

I just statred Flash CC for the first time and it seems that the text within the pop-up window (dialog box) is mis-aligned and not allowing me access to the command buttons, nor all the text. (ie: the NEW Template Box, can't see but 2/3 of the content)

I just statred Flash CC for the first time and it seems that the text within the pop-up window (dialog box) is mis-aligned and not allowing me access to the command buttons, nor all the text. (ie: the NEW Template Box, can't see but 2/3 of the content) is there a fix to this problem? using 8.1, Monitor is a high res.2560x1440.

Another View.
the GUI is so hard to read (so small) I enlarge my Ps UI by the instructions below...which helped a lot.

Ive just upgraded my late 2009 macbook, and things are not working properly. First of all, when I started the computer first time after installing Mountain Lion, some message advised me that some files were impossible to install.

Ive just upgraded my late 2009 macbook, and things are not working properly. First of all, when I started the computer first time after installing Mountain Lion, some message advised me that some files were impossible to install. Once I wrote my password, and for now on, everytime I start the session, another window advise me that "Java SE 6" is missing, due that, the computer can't run some "CS5Service Manager". If I try to install it, the download ends with an error. If finally, you skip the istallation, you arrive to the dock, but the menu bar at the top of the screen doesn't show up.
In addition, my trackpad doesn't works either. I can move the arrow but i can't click anywhere, probably because the option of clicking by touching is disabeled and I can't performance a regular click.
I'll be very glad if someone know what the heck is happening with my computer. Anyway, I'm going to the genius bar next Saturday. Thx!

We're sorry.
We can't find the article you're looking for.
Please return to the Apple Support homepage.
Sigh.

The computer that I first used to download iTunes is no more. I have a new computer that I set my wife up on. While I can see all my music in the iTunes library I cannot sync my iPod

The computer that I first used to download iTunes, to buy songs and to sync my iPod Nano to iTunes is no more. I have a new computer that I inadvertently set my wife up on. When I sign in, while I can see all my music in the iTunes library, when I tried to 'sync', I have lost all my music in my iPod and I now have my wife's library on there instead.
I subscribed to iTunes Match, thinking that this would help. It hasn't and I'm not happy!
I have arranged to take my iPod into an Apple store next Tuesday but isn't there something you can tel me to do that ties my iPod wth my music and leaves my wife's music for her iPod? Please help, I am so frustrated and have wasted so much time on this, reinstalling iTunes, restoring my iPod....
Can anyone help?

Have you read for possible solutions over in the "More Like This" thread over here?----------------------->
Check out the following KB Articles: http://support.apple.com/kb/HT1329 How to use your iPod to move your music to a new computer
http://support.apple.com/kb/HT4527 iTunes: How to move your music to a new computer

The artwork on the first 32 of my albums have suddenly changed to all showing a recently loaded CD. I have recently been asked via a "Pop Up" if I wanted to have my collection artwork automatically found-I declined. I have just updated to 11.0.3

Hi, can anyone help? The artwork on the first 32 albums in a collection of about 1,100 have mysteriously changed to a single artist (Wanda Jackson) I have recently added to my collection.
This album was "ripped "from a CD, as are most of my albums. All the albums affected have been on my system for years.
Two things have recently happened which may or may not be significant.
1) I was offered the opportunity to have any missing artwork in my collection automatically found for me by Apple, I declined, and the albums that have changed all had the correct artwork attached.
2) I have just recently installed the latest Software Version 11.0.3
Any help would be appreciated but as I am not computer literate it would need to be simple.
Regards
tayloriscool

Im wondering why my post hasn't been answered yet. I did file a report with the BBB and I had a rude representative from Verizon call me named Steve. He said I can file all of the reports I want and I will just keep getting calls from him. I can understand why my phone couldn't be replaced because of the small crack. I guess I have to eat that one (but it sucks because the lollipop update is what caused the problems) but what about all of the data overage I had to pay for for trying to fix this phone because of a lollipop update. I dont think it is fair to have to pay that as well. In addition, because I have an east coast phone number but live on the west coast, I cannot have tech support after 8pm. Verizon has cut this off. Im very dissatisfied and I have been a customer of Verizon for 13 years. Im hoping for a response this time.

Textinput in all the colums of the first row of datagrid

Similar Messages

Maybe you are looking for