Texts can be sent but not received

My daughters Droid 2 can send texts and sometimes receive them. At other times she stops receiving them and then gets 20 at once that had been sent and never came thru. We just received a replacement phone, the original phone was doing it also. Is it the phone or the service? My son has it happen with his Droid 2 also, he doesn't text as much so we didn't know it was happening right away.

That's pretty odd. Does your daughter have a large quantity of text messages in her inbox?
Many times if this is the case, then there can be a delay with the messages.
Is she using the texting app that came installed on her phone or did she happen to install a 3rd party texting app?
First, have her clear out the texts she doesn't need.
Then have her go to Settings>Applications>Manage Applications>select ALL at the top>look for Messaging or SMS> clear cache
Once she has done that, please advise if she is still having problems with her messaging being delayed.

Similar Messages

Mail can be sent but not received

We have three email addresses (POP) on the same ISP account and the other two can send and receive.
When I tried to send an email to the faulty address, the following reply came seconds later:
+Delivery to the following recipients failed.+
[email protected]
+Final-Recipient: rfc822;[email protected]+
+Action: failed+
+Status: 5.2.2+
+X-Display-Name: [email protected]+
+---------- Forwarded message ----------+
+From: Sender <[email protected]>+
+To: Addressee <[email protected]>+
+Date: Sun, 8 Feb 2009 12:03:30 0000
+Subject: This is the Sunday morning test+
+This is the Sunday morning test+

OK, Keychain Access has three Keychains, two of which appear identical right down to Date Modified for each password) and a third called X509 Anchors.
Within each of the two apparently identical Keychains is a single POP3 password for my ISP with my email account number in the info box at the top (when I view the other two users's accounts in Mail preferences, their account numbers are the same as this but suffixed by _2 and _3. But, as I say, the only POP password appearing in Keychain Access is mine. Do you mean I should delete it?

Can send SMS but not receive after update...

After updating my iPhone 4S to ios6 i have problems with receiving messages.I can send SMS but not receive. What to do?

Although I don't believe in consequences, I think this might be one of them. My email was working fine until I installed my VPN. I use the Thunderbird email application, which I like a lot, for three Hotmail accounts and two Yahoo accounts. After installing the VPN I could receive mail but could not send it on any of my accounts. I contacted the VPN and they sent me some numeric IP Addresses to put in my account settings. One for the Hotmail accounts and one for the Yahoo accounts. I did as instructed and the email seemed to work okay. It was late in the evening and I went to bed. The next morning, I could send and receive emails on the Yahoo accounts, but could only send emails on all of the Hotmail accounts.
I guess I'd like to know if anyone else is having this same problem. I'd hate to think it was just me. :-)
I would like for Thunderbird to tell me if there is a way to change the outgoing server in the Account Settings, so I can enter the IP Address in there, or does the fact that I entered an IP Address in the Server Name box, cause it to override any other entries? Or should that even make a difference with me receiving mail?
Also, at what time limit does Thunderbird send back a message that the connection to the server timed out? I continually get that message.
I found a way to do a ping on the Hotmail server and the fastest response time for the last two days was 258.09 which seems very slow for a business computer. At least for a business that wants to stay in business. So is that time above the Thunderbird threshold of the connection time out message to be generated?
Thanks for all your help and suggestions, Carole

I upgraded to lion today and just realized I am not receiving any mail. I can send out but not receive. i'm using a POP Road Runner account. Any help appreciated.

I just upgraded to Lion today and realized I'm not receiving any mail. I can send out but not receive. I am using a POP server Road Runner acct. Any help would be appreciated.

Try Mail->Window->Connection Doctor. If there is a problem reported, try:
Open Mail->Preferences and check your settings.
If you still have a problem, Copy your settings (screen capture ⇧⌘4), delete account, and re-setup account

Account password reset sent but not received by Outlook.

I have requested a password reset, went through the process and had success at Apples end. Email was sent but not received by the Outlook account email I have been using for years. Outlook is still working fine. Nothing in Junk folder and have added the apple email to contacts (from last reset).
Any ideas?

Contact Apple for assistance resetting the password, either by going to https://expresslane.apple.com, then click More Products and Services>Apple ID>Other Apple ID Topics>Lost or forgotten Apple ID password, or by contacting the Apple account security team: http://support.apple.com/kb/HT5699.

Why can I send but not receive them?

Why can I send but not receive them?

Macrumors posted a solution for this. I used it and it seems to have worked for me.
Here's what they said:
1. Turn off iMessage in Settings > Messages
2. Reset networking settings in Settings > General > Reset
3. Reenable iMessage in Settings > Messages
Source:
http://www.macrumors.com/2013/09/30/resetting-network-settings-may-fix-imessages -not-working-in-ios-7/

I can send emails but not receive them. The sender address was rejected by the server

i can send emails but not receive them. The sender address was rejected by the server.

Your mail server doesn't like the sender's address for some reason, perhaps because his mail server has been blacklisted for spamming.

Can send packets, but not receive packets

Running Windows XP, my Internet was working fine and then stopped working. It still shows that I am connected to the Wireless Network and shows that packets are being sent, but not received. Will work directly from the cable, but not wireless. Tested Wifi card on other computer, that works, Internet is working on other computer wirelessly.
Any options?
Using Wireless-G Notebook Adapter with SpeedBooster WPC54GS
Broadband Router WRT54GSMessage Edited by tiggerx40 on 10-09-200603:49 PM

What is the router model number and version? You may find the model number underneath the router itself on one of the stickers.
Anyway, if you are plugged in to the router:
1) open up internet explorer and go to 192.168.1.1
2) username: just leave it blank password: admin
3) go to the wireless tab:
You may change the ff:
SSID - this is the name of your network
Channel - signal of the router (suggested value is 11)
----> save settings after you have done the necessary changes
4) go the wireless security (found on the subtab)
set-up security:
- suggested mode is WPA Personal
If your router is a WRT54G v5-v6, go to the status page:
- check the firmware version, if the firmware version belong to any of the ff. below then download and upgrade the firmware.
► 1.00.1
► 1.00.4
► 1.00.6
► 1.00.7
► 1.00.9

I can send emails and texts on my iPhone but not receive

How can it be possible that I am sending emails and texts but not receiving either?

Hi Go to Settings email accounts delete each account then add back again. Text messages are run by your network provider check with them for that problem. Cheers Brian

E6 (Belle) - Phone can sent but not receive emails

Hello,
I have set up a 2nd mailbox. The first mailbox functions fine. But with the second mailbox I can send, but not receive emails.
Has anybody an idea how to solve that?
Many thanks

One more try. The problem here is that I don't have hands-on experience with Belle. Some backtracking... I assume that
1) Your firmware is up to date.
2) Even manually syncing email doesn't work.
3) You are not seeing any error messages that would help us track down the problem.
I did a web search, and found other Belle users complaining about Gmail support, but mostly that push doesn't work reliably. Manually syncing (or polling every X minutes) still does. It's a long thread, but you might want to read http://discussions.nokia.com/t5/Messaging-Email-Browsing-and/E-mail-doesn-t-sync-automatically-after... in case any comments help you.
If none of that helps, try enabling logging. Within Nokia Email, I have a logging option under Settings -> Global Settings -> Log Output. It writes at least two files to Phone Memory -> Logs. In my case, one file logged only GUI calls...and so was useless, and the other file was always empty. (A third file applied only to Mail For Exchange.) But give it a try and check the files later for references to Gmail or IMAP. Read them from a computer if that helps, and then post any relevant portions here. Also turn off logging when you're finished.
Again, good luck!

HT201436 I have good reception and can make calls but not receive any, it's going straight to voicemail?

Hello, I have good reception and can make calls but not able to receive calls, it's going straight to voice mail?

What did your carrier say when you contacted them?

Iphone 5 Picture Messages Sent But Not received

My iphone 5 will send picture messages and say delivered (iMessages) but not received by that person. The person will only get the picture if it was through SMS. I need help on fixing this ASAP

Hello Dom_Guy,
Thank you for the details of the issue you are experiencing with iMessage. I recommend the following steps for the issue you described:
To resolve issues with sending and receiving iMessages, follow these steps first
Check iMessage system status for current service issues.
Go to Settings > Messages > Send & Receive and make sure that you have registered iMessage with your phone number or Apple ID and that you have selected iMessage for use. Learn more abouttroubleshooting iMessage registration if the phone number or Apple ID isn't available for use.
Open Safari and navigate to www.apple.com to verify data connectivity. Learn more about troubleshootingcellular data or a Wi-Fi connection if a data connection isn't available.
iMessage over cellular data might not be available while on a call. Only 3G and faster GSM networks support simultaneous data and voice calls. Learn more about which network your phone supports. Go to Settings > Wi-Fi and turn Wi-Fi on to use iMessage while on a call if your network doesn't support simultaneous data and voice calls.
Restart your device.
Tap Settings > General > Reset > Reset Network Settings on your iPhone.
If you are still unable to send or receive an iMessage, follow these steps
Make sure that the contact trying to message you isn't blocked in Settings > Messages > Blocked.
Verify that the contact you are attempting to send a message to is registered with iMessage.
If the issue occurs with a specific contact or contacts, back up orforward important messages and delete your current messaging threads with the contact. Create a new message to the contact and try again.
If the issue occurs with a specific contact or contacts, delete and re-create the contact in the Contacts application. Create a new message to the newly created contact and try again.
Back up and restore your device as new.
iOS: Troubleshooting Messages
http://support.apple.com/kb/TS2755
Thank you for using Apple Support Communities.
Best,
Sheila M.

Email sent but not received?

Hi,
I have an email script that is in place in several pages of my website.
I works perfect from every page except one.
I far as I can see in that particular page it does actually send the message but I am just not receiving it, I do receive all other messages from my website.
I have tested the script with echos and the script does run to the mail() script, I have echoed all variables before it and they are all completed and I have placed an if ... else.. clause testing $mailSent, it was confirm as $mailSent = 1, it did not get to the else clause which was !mailSent.
If the message is being sent why would I not receive it when I receive all other messages from other pages, I am at a loss as to what and where to check.
I queried it with my host who could not produce any errors.
Code below.
$to = '[email protected]';
$subject = 'Enquiry from mydomain';
$message = "Enquiry from: $name\n\n";
$message .= "Email: $email\n\n";
$message .= "Tel: $tel\n\n";
$message .= "Enquiry: $enquiry";
// limit line length to 70 characters
$message = wordwrap($message, 70);
// create additional headers
$headers = "Content-Type: text/plain; charset=utf-8\r\n";
$headers .= 'From: me<[email protected]>';
if (!empty($email)) {
$headers .= "\r\nReply-To: $email";
// send it
$mailSent = @ mail($to, $subject, $message, $headers);
I look forward to any suggestions.
Thank you in advance.

All,
Thanks for your reply. Worked with Basis as I do not have access to SOST/SCOT in production environment.
@Abdullah: SCOT is correct. For all the e-mail messages the status is green. (Successfully Sent)
@Rick: This is a custom application which triggers workflow. I can see the emails in SOST with status as successful.
@Anjan: No emails in junk folder as well.
@Swadhin: If we send a test email from SOST, it works fine. Me too suspecting the issue with user id. Working on it.
@Rahul: Yes. Some users received the emails. Also email is maintained for WF-BATCH user.
@Mike: Tried testing test email and it worked fine. No filters in SCOT. Exploring more options with basis/security.
- Omkar

Can send mail but not receive -- connection doctor OK, GetInfo shows msgs

In the last couple of days I stopped receiving email on my Mac in the Mail app, but not my PC. Both access POP3 accounts at the same ISP, different POP3 accounts. All software is patched to latest version using Software Update -- PowerMac G5 Dual, latest OSX version. On the Mac, connection doctor says I'm A-OK (internet connection, POP connection, SMTP connection.) Also, if I do a Get Info on the inbox and show messages on the server, it shows 75 messages on the server. I have not retrieved messages to my knowledge (so I don't think the server thinks I already downloaded them), and the "Messages that have been downloaded to my Mac" pulldown option in Get Info confirms this, by not showing any of the 75 messages in the Show all messages pulldown option. But -- Get Mail does nothing! I have tried rebooting, deleting and recreating the account, etc. Since I can get POP mail for another account at the same ISP on my PC, and I have touched nothing on the Mac, and all the diagnostics show the connection and POP3 chat is working perfectly, this very strange. I do not think I have applied any patches or anything that might screw it up, but who knows.
The only strange thing that might be a clue is the little spinning status indicator next to the InBox label runs for about 30 sec or so before it decides not to do anything -- seems a little long. Any suggestions? Any way to do detailed debugging of the POP3 session to see if the Mac-server conversation is wanked up somehow?
Thanks!
David

For POP accounts, Mail uses a file within the account folder to keep track of which messages have already been downloaded. Deleting it should cause Mail to download everything still on the server as if new. I don't think it'll work in your case, but try it anyway just to be sure:
1. Quit Mail.
2. In the Finder, go to ~/Library/Mail/POP-username@mailserver/.
3. Locate one or two files named MessageUidsAlreadyDownloaded and move them to the Trash. Mail 1.x used MessageUidsAlreadyDownloaded to keep track of which messages had already been downloaded. Mail 2.x uses MessageUidsAlreadyDownloaded2 for the same purpose.
You can use the Account Info window first to remove from the server any messages you don't want to be downloaded again.
You may try creating a new user account in System Preferences > Accounts, set up mail anew there, and see whether the problem happens there as well.
Another thing you may try is using a different method to connect to Internet, if possible. Also, if Preferences > Check for new mail is set to Every minute, changing it to something greater (e.g. Every 5 minutes) might help.
Something that usually works is removing some messages from the server (download them with another mail client first, to avoid losing them). Sometimes, Mail chokes on a message it cannot download, and that prevents it from downloading the rest as well.
Any way to do detailed debugging of the POP3 session to
see if the Mac-server conversation is wanked up somehow?
Detailed debugging no, but looking at the Console could be informative:
1. Open /Applications/Utilities/Console.
2. From the File menu, choose either Open Console Log, or Open System Log, or both, so that the Console application displays the contents of both system.log and console.log.
3. Try to reproduce the problem and look at the bottom of the Console windows for messages that might be written there as a result. They may provide some clues as to what the problem is.

Solution found- messages sent but not received

For those that have had the problem of sending texts on your iPhone, but they are not being received at particular numbers, a friend of mine had success with the following procedure:
1. delete all contacts
2. initiate a message to a problem receipient using xxx-xxx-xxxx within messages itself. Do not make a new contact yet. Do not include a 1 as a preface in the number.
3. If successful, choose "add to contacts", and rebuild your "contacts"
Let me know if this works for you.
Jim C

Hello Dom_Guy,
Thank you for the details of the issue you are experiencing with iMessage. I recommend the following steps for the issue you described:
To resolve issues with sending and receiving iMessages, follow these steps first
Check iMessage system status for current service issues.
Go to Settings > Messages > Send & Receive and make sure that you have registered iMessage with your phone number or Apple ID and that you have selected iMessage for use. Learn more abouttroubleshooting iMessage registration if the phone number or Apple ID isn't available for use.
Open Safari and navigate to www.apple.com to verify data connectivity. Learn more about troubleshootingcellular data or a Wi-Fi connection if a data connection isn't available.
iMessage over cellular data might not be available while on a call. Only 3G and faster GSM networks support simultaneous data and voice calls. Learn more about which network your phone supports. Go to Settings > Wi-Fi and turn Wi-Fi on to use iMessage while on a call if your network doesn't support simultaneous data and voice calls.
Restart your device.
Tap Settings > General > Reset > Reset Network Settings on your iPhone.
If you are still unable to send or receive an iMessage, follow these steps
Make sure that the contact trying to message you isn't blocked in Settings > Messages > Blocked.
Verify that the contact you are attempting to send a message to is registered with iMessage.
If the issue occurs with a specific contact or contacts, back up orforward important messages and delete your current messaging threads with the contact. Create a new message to the contact and try again.
If the issue occurs with a specific contact or contacts, delete and re-create the contact in the Contacts application. Create a new message to the newly created contact and try again.
Back up and restore your device as new.
iOS: Troubleshooting Messages
http://support.apple.com/kb/TS2755
Thank you for using Apple Support Communities.
Best,
Sheila M.

Texts can be sent but not received

Similar Messages

Maybe you are looking for