Textvariable with replacement path for 0CALMONTH doesn't work ...

Hello expert,
we have done release upgrade BW 7.01 -> BW 7.3 SPS 04. While checking queries I found out that textvariables with replacementpath for 0CALMONTH doesn't work anymore. In the report I only see the variable name like ZVARXYZ01 but want to see something like 'JAN 2011'.
As far as I understand 0CALMONTH don't need a texttable. Texts can be found in table T247. I checked the table and all values looks fine.
Any Idea where the problem is or how I can analyze it?
Thank you in advance,
Peter

Hi Peter
Please check this link, especially this note for text variable problems after upgrade to 7.3
Let us know if it helps.
Think of giving points.
Regards
PC

Similar Messages

Can anyone explain with senairio for textvariables with replacement path?

can anyone explain with senairio for textvariables with replacement path?

Hi
your query contains 3 columns...
column1(year executed by user) column2(year-1) column3(year-2).
when user enter 2006 key figures headings should appear like this
2006 2005 2004...
How can you solve this??
so create a text variable of replacement path..replace with object year..
so you will get the above out put..
you can concatenate like
actuals 2006 actuals 2005 actuals 2004...
Hope it clears...
please assign points if useful
Thanks
Teja

Query - Replacement Path for a Customer Exit Variable

Hi
New to the field and the board. Any and All help is greatly appreciated.
I have created a query which runs based on a date selection. The query have few customer exit variables whose values are set in ABAP. All Key Figures in the query are brought depending on the date ranges that each of the CE returns. Ex - one column is sales for first 10 days, 2nd for second 10 days, 3rd for first quarter, 4th for 2nd quarter and such. There are about 20 - 25 columns with KF in the query and all are Customer Exit date driven.
The challenge:- Each column heading should have the name of the month. I tried using Replacement Path. But it works when the selection is based on a constant value but not on value based on variable which is a customer exit. Ex - If I say restrict Cal/Month for July 2013, the replacement path for the Col Heading works fine. But if I say restrict Cal/Month for "ZVAR_SecondQtr_First_Month" the replacement path doesn't work.
Help Please
Thanks
Vidya

In the text variable that you are using , i guess you have a replacement path. In this instead of using your characteristic for specifying how the value has to replace, use the variable option and give the variable name there
http://help.sap.com/saphelp_nw70/helpdata/EN/43/565cd22fc95f6ce10000000a1553f6/content.htm
Hope it helps
Regards,
Rathy

Inventory Report-Replacement path for Base UOM to Case and Standrad Cost

Hi, We have a Scenario as below:
Question1:
We have a multiprovider contains 4 infocubes and 2 Master Data objects
a.Demand
b.Inventory
c.Sales Orders
d.In Transit
Master Data objects
a. Material (contains Base UOM to Case as Key Figure Attribute and also Base UOM as an attribute)
b. Material Location (Contains material as an attribute and also Standard Cost as a Key Figure attribute)
At the report level two formula variables are defined with replacement path for showing the Base UOM to Case and Standard Cost in columns.
We have 4 reports on this multiprovider. There is a dialy sales report which gives the following details
Material, Location, MRP Controller, CalDay, Base UOM, Actual Sales(AS), Dependent Demand(DD), Consumption Qyt(CQ), Base to Case UOM, Standard Cost
In this report for all the records the Base to UOM and Standard Cost column is coming with values which is nothing but the replacement path on the material master key figure attribute. Though this report is on the multiprovider all the major keyfigures (AS, DD and CQ) are coming from a single cube( this is an observation from myside).
We have another report which is the Inventory Report with the following details:
Material, Location, MRP Controllder, Calday, Base UOM, Unrestricted Inventory(UI), committed Inventory(CI), Back Order Qty(BOQ), In Transit by Sh/Rec(ITS), In Transit Pipeline(ITP), On Order Qty (OOQ), Current Inventory Position (CIP), Quality Inspection Stock(QIS), Block Stock(BS), Base to Case UOM, Standard Cost
Now in this report for all the records the Base to Case UOM and standrad cost is not showing up. Is there anything which needs to be done in order to get the Base to Case UOM and standard cost for all the records.
Question2:
When Non-Cumulative and Cumulative key figures are combined at the multi provider and also at the report level, will there be any problem?
Regards
Vijay

Hi,
I think you can proceed with virtual characteristics for this.In the code you can truncate the time and you can display on the date:
Regards
Prasad

Issue with Replacement path variable

Hi all,
I had created a formula variable with replacement path for this i had created a variable with replacement path and i had used it in the formula but i am unable to get the value of the replaced objects can any one thru some light on this.
Regards

yes the ref char having value. another thing do i need to include the char in the row r columns which has been replaced in the formula variable.
regards

Text Variable with Replacement Path

Hi,
I want to create a report which will show me 5 years of data. I have used a variable for Fiscal year which will be given by the user. Now I created a 5 key figures with offset to show the 5 years of data.
I used a text variable with replacement path based on Fiscal Year, to display the year in the column heading. But I am only able to get the correct year in the first column. Rest of the column is showing me the same heading. Actually the offset is not working for the text variable.
Can anybody let me know how could we achiev the column heading for the columns with offset.
Thanks

Prashanth,
I have used a replacement variable in the exact situation. Instead of years, I have different months. I have used this variable on 0CALMONTH. I also have two more keyfigures where CALMONTH is offset by -12 and +1.
This variable works perfectly for me as expected.
Did you check the data to make sure that your offset is working? This is was I did for Offsetting and i am sure you have done the same thing.
Right click on the variable, "restrict". A window opens with the values. With the variable selected in the right side, right click "Specify Variable Offsets". If the replacement variable is built on this infoObject, it should work.
Hope it helps. Let me know if you still can not find a solution.

Error while creating a Characteristic Variable with Replacement Path

Hi all,
    I am trying to create the Characteristic Variable ZVLOWDT (Low Date') with Replacement Path on characteristic ZSTARTDT (Start Date) and it gives the error 'Source to replace 'Low Date' is not defined.
   I have created a User Entry Variable VAR_DATE (Start Date) with interval like '01/01/2009 - 01/15/2009' and Customer Exit variable ZVCPDAY (does some calculation based on the input of VAR_DATE) on the same ZSTARTDT characteristic. I want to get the 01/01/2009 (lower range date of the selection) into this Characteristic Variable ZVLOWDT. We are in BI 7.0 and the following are it's properties:
General Tab:
Description: Low Date
Technical Name: ZVLOWDT
Type of Variable: Characteristic Value
Processing by: Replacement Path
Reference Characteristic: ZSTARTDT Start Date
Details Tab:
Variable Represents : Single value
Variable is: Mandatory
Variable is Ready for Input : unchecked
Replacement Path Tab: Replacement Rule
Replace Variable with : Variable
Variable : VAR_DATE
Replace with : KEY
Why I am getting this error, PLEASE ?
Thanks,
Venkat.

Hi Khaja,
   We could derive a Variable value from another Variable with out Customer Exit. There is a white paper.
First have the User Entry Variable (ZV_X) and it accepts the date range like '01/01/2009 - 01/31/2009'. Next create the Characteristic variable (ZV_Y) of Replacement Path for which source variable will be ZV_X and we could get the 'FROM Date' (01/01/2009) from the selection (ZV_X) into it (ZV_Y).
While creating the Characteristic variable (ZV_Y) of Replacement Path, I didn't find my newly created ZV_X variable in the list of available variables under 'Variable' header in 'Replacement Path' tab and it is causing the error 'Source to replace variable ZV_Y is not defined'. How could I create the Characteristic variable of Replacement Path, PLEASE ?
Thanks,
Venkat.

BW 3.5 - Issue with formula variable with replacement path

Dear experts,
I'm facing an issue with formula variable with replacement path.
Just to clarify, I know replacement paths is raising a lot of questions but I've been using this functionnality extensively in the past, both in 7.0 and 3.5, so I'm not looking for basic information about how to use it.
I'm trying to setup a simple report that would show total values per plant of Purchase Order < 100
To do so I've setup a calculated key figure as follow:
VAR1 * ("PO value" < 100 ) * "PO value"
VAR1 is a formula variable with replacement path on 'purchase order' and value attribute 'constant =1'.
(The report has to show values summarized by plant but should not show the detail PO by PO, so I'm not looking at a solution based on condition)
The report as characteristic "plant" in rows and my CKF in columns.
Now let's take an example. I have 3 POs in Plant 1:
PO1 -> 150
PO2 -> 90
PO3 -> 80
Because of the variable with replacement path, the result in my query should be:
plant1 = 170 (even though characteristic "purchase order" is not in my rows, system should evaluate PO one by one and return values only for those two that are below 100).
But the result coming is 320, which is wrong.
I've done the same report on many other 3.5 systems and it worked perfectly, and I am not able to get proper support from SAP OSS who keep saying that this functionnality is not ready in 3.5 (although I've provided screenshot of this working on another 3.5 system!!! how frustrating...)
They have also pointed to problems of Before and After aggregation but that has absolutely no impact. Once again, the scenario is working perfectly on other 3.5 systems with the same query design, so i'm sure it has nothing to do with Query Designer options.
Would anyone have ever come to an equivalenet problem? I'm wondering whether the DB itself could not play a role in the variable with ref characteristic 'constant =1' ...
Any though is welcome!
thanks

Hi,
The text variable is replaced when the exact date is clear for this key figure column according to the restriction.
To achive this, please make sure that either the variable is directly restricted in the key figure selection, or that the date characteristic is in drilldown.
Regards,
Patricia

Variable with Replacement Path

Hi, I have two queries. The results of the first one should be the input for the second one. E.g. the first query shows a list of personnel numbers and additional information. These personnel numbers shall be overtaken by the second query. The personnel numbers belong to "Dimensions" in the Query Designer. I alread tried to create a variable with replacement path to the dimension personnel number. I implementet this variable in both the first and the second query (under: "rows"). It`s no "Formular variable" and no "Calculated Key Figure" but a "Characteristic Value Variable" of a Dimension. The problem is now that I cannot execute any of the two queries. The error "Abort the query cannot be released for OLE DB for OLAP. System error in programm CL_RSR_REQUEST and form PREPARE_VQUERIES:INVALID_
What is my mistake? Thank you in advance! Eve

Hi Eve,
It is possible to connect the 2 queries using a Replacement Path characteristic variable. You would need to create the variable on the char whose values you want to pass from Q1 to Q2. The variable will be of type replacement path and you will need to enter the name of Q1 from which it will get the values. Make sure that you include this char in the query definition of Q1 and Q2. In Q2 you will restrict the characteristic using this variable. DO not use this variable (replacement path) in Q1.
In your query properties check if you have turned on the checkmark for Release for OLE DB for OLAP (3rd tab). If the check mark is there, then remove it.
We are using the scenario in a couple of places, and it works very well.
Hope this helps...

Creating Variable with Replacement Path to get value from ANOTHER Variable

Hi all,
    Is anyone has created the Variable with Replacement Path to get the value from another User Entry Variable, PLEASE ?
First created the User Entry Variable (ZV_X) and it accepts the date range like '01/01/2009 - 01/31/2009'. Next created the Characteristic variable (ZV_Y) of Replacement Path for which source variable will be ZV_X and we should get the 'FROM Date' (01/01/2009) from the selection (ZV_X) into it (ZV_Y).
While creating the Characteristic variable (ZV_Y) of Replacement Path, I didn't find my newly created ZV_X variable in the list of available variables under 'Variable' header in 'Replacement Path' tab and it is causing the error 'Source to replace variable ZV_Y is not defined'. How could I create the Characteristic variable of Replacement Path for my requirement, PLEASE ?
The following is from help.sap..com:
Replace with Characteristic Value
Text and formula variables with the processing type Replacement Path can be replaced with a corresponding characteristic value. In the variable editor, on the General tab page, you specify under Reference Characteristic the characteristic that is to be referenced by the replacement. On the Replacement Path tab page, you can choose whether the variable is replaced with the From or the To Value and with the Key or the Name of the characteristic value. You can also specify the Offset Start and Offset Length for the output.
Replace with Variable
Characteristic value variables, hierarchy variables, text variables, and formula variables with the Replacement Path processing type can take their values from a different variable.
The following prerequisites need to be fulfilled:
Variable
●      The variable must not be input-ready
●      The variable must represent a single value
Source Variable
●      The source variable must not be a hierarchy node variable
●      The source variable must be input-ready
●      The source variable must be available in the query
●      The source variable must represent a single value or an interval
In the variable editor, on the Replacement Path tab page, you specify the source variable from which the value is to be determined. The value is either determined from the key, the external attribute of the key, the description, or the attribute value. You can specify an Offset Start and an Offset Length for the output here. The variable is replaced on the variable screen upon each data release.
Thanks,
Venkat.

Hi Eve,
It is possible to connect the 2 queries using a Replacement Path characteristic variable. You would need to create the variable on the char whose values you want to pass from Q1 to Q2. The variable will be of type replacement path and you will need to enter the name of Q1 from which it will get the values. Make sure that you include this char in the query definition of Q1 and Q2. In Q2 you will restrict the characteristic using this variable. DO not use this variable (replacement path) in Q1.
In your query properties check if you have turned on the checkmark for Release for OLE DB for OLAP (3rd tab). If the check mark is there, then remove it.
We are using the scenario in a couple of places, and it works very well.
Hope this helps...

Formula variable with replacement path on system date

Hi Experts,
I got a requirement to calculate "Days without payment" in report level.
Days without payment = System Date - Payment Date.
(Payment date field is available in CUBE, but system date field is not available in the CUBE)
As we know, the difference b/w 2 dates is not possible directly.It can be possible by creating 2 formula variables with replacement paths on the dates and by writing aformula on these 2 formula variables.
But the thing is I dont have system date readily available, and I tried by using SAP Exit. But we cant create formula variable replacement path on another variable (SAP EXIT).
Do we have any SAP variable for formula with replacement path readily avaliable to get system date (or) any other suggession.
Please suggest me.
Thanks,
Sai Chand.S

Hi Arminder,
Thanks for your valuable answer.
I tried doing the same previously.As u said we can get system date by creating customer exit variable.
But the thing is to find difference b/w 2 dates, we cant do it directly, we need to create 2 formula variables with replacement path.
1) Var1 = Formula variable with replacement path on system date(custoer exit variable).
2) Var2 = Formula variable with replacement path on paymanet date.
Number of days = var1 - var2.
But as in 1st point, we cant create formula variable with replacement path on another variable, as system date is already a variable of type customer exit.
We can create replacement paths only on characteristics.
Please suggest me .
Thanks,
Sai Chand.S

Formula Variable with Replacement Path - drillup ref.char and still working

Hi all,
I have a requirement, where formula variable (with replacement path) shouldn't work when I remove the reference characteristic from the rows. But this is not the case at the moment
I have 'Brand' and 'Material' in the rows and there is 'Material Indicator' in the columns. This 'Material Indicator' is a formula and there is formula variable in it with the type replacement path.
Reference char is 'Material'; Replace with 'Attribute Value' is selected also. As attribute I am selecting one of the attributes of the 'Material'.
In the report output, I am seeing relevant attribute values when Material is in the rows. But when I remove the Material from the report, I still see the values for this Material Indicator column. But I expect to see blank instead..
Can you please share your comments?
Thanks in advance.
S.P.

hi,
Irrespective of the drilldown on Material, the fomula variable will be replaced by material value. This is how replacement variable should behave. You might have to change the design. For more inputs, let me know your requirement exactly.

Formula variable with replacement path to another input variable

Hi @ all,
i have a question regarding "Formula variable with replacement path to another input variable".
My Problem is that in selection screen and for info-fields the input variable is shown with its key and not with its description.
Scenario:
A formula variable (X) is used to get an input value of a characteristic variable (Y) for 0Fiscper3 to realize a IF-Then scenario.
The formula variable (X) uses replacement path by variable (Y) replace by "key".
In selection screen of the query variable (Y) is named with its key "ZAB_BUPE01" and not with its description " fiscal period". Same as for info-fields where the description is "ZAB_BUPE01" and not " fiscal period".
Does anybody have a solution to display the selection variable correctly?
Regards
Tobias

Issue Solved!
The input varaible (y) for 0Fiscper3 was saved globally on the InfoProvider. This results in that the formula variable with replacement path only shows its technical name. I put the input variable in the query itself and it soved the problem. The variable is displayed with its description in selection screen.
Regards

Issue - Formula Variable with Replacement Path

Hi,
Is it mandatory to include the base characteristics in the rows on which the formula variable(replacement path) is based on. As long as the base char is in the rows the variable works fine. The moment I take that off, the variable doesn't produce any result. I know the char can be put in the rows and can be hidden, but then in that case I don't get the desired aggregation level.
Has anybody come across this probelm and managed to sort this out? Kindly suggest any solution.
Thanks,
Anurag.

Hi,
a formula variable with replacement path only works if the replacement object is in the query in either the rows or colums. The data can never be aggregated on a higher level then the infoObject in the replacement path. If you want a higher aggregation you can add a new key figure as an attribute to your infoObject and fill it with the value you want in the loading process. You can use that key figure in your queries every way you want.
Kind regards,
Alex

Using Characteristic value with Replacement path variable

Hi All,
Could you please let me know if it is possible to use charecteristic value instead of key figure with replacement path variable. My requirement is to use factory calendar id as the replacement variable on plant characteristic, now when I choose replcaement variable with Attribute value, the dropdown menu only gives the list of key figures assigned as an attributes to Plant.
Now I am looking for a solution to use factory calendar id as the attribute.
Thanks for your help in advance.
Regards
SS

Hi sachin
U can use it
Look at these links
Re: Customer exit & Replacement path........?
Variable with Replacement Path
Re: Replacement Path for Charastrictics Variable
http://help.sap.com/saphelp_nw04/helpdata/en/03/6ba03cc24efd1de10000000a114084/frameset.htm
Regards
KR

Textvariable with replacement path for 0CALMONTH doesn't work ...

Similar Messages

Maybe you are looking for