TF10121: The path '' is not found or not supported. Type or select a different path. After SQL2012 install and Solution upgraded to VS2010

I have recently upgraded a solution from vs2008 to vs2010.  This solution happens to contain several .rptproj file (SSRS 2008R2 reports).  I was able to upgrade the solution after I installed SQL2012 (which installed the necessary templates
into vs2010). 
However whenever I open the solution the Output window now pops up and continuously lists the same error (shows output from Source Control - Team Foundation).
TF10121: The path '' is not found or not supported. Type or select a different path.
I have tried reinstalling Team Explorer SP1, and VS2010 SP1, but with no change.
If I unbind the solution from source control the messages go away.  Rebind and they return.
The problem doesn't always start straight away, it may take a few solution explorer clicks.
Opening an rdl into the editor seems to halt the messages, until I go back to clicking in solution explorer (similarly the issue doesn't always re-occur first click).
E.g.
TF10121: The path '' is not found or not supported. Type or select a different path.
TF10121: The path '' is not found or not supported. Type or select a different path.
Audit.rdl has been automatically checked out for editing.
Then no errors until going back and clicking in solution explorer (which is using auto hide)
[See also:
http://social.msdn.microsoft.com/Forums/en-US/tfsversioncontrol/thread/8c7cc472-3ac1-4800-8199-5f4b41414748]
Does anyone else out there share this problem or more importantly a solution/work around?

Hi Evanw21,
Based on the current information, it seems to be the known issue described in the following KB article:
FIX: TF10121 error when you right-click a project file of the project or a folder in the project in Visual Studio 2010
The root cause of the problem is that we hold onto a stale reference to the old project and get back an empty string when we try to get its directory path. To resolve this problem, contact Microsoft Customer Support Services to obtain the hotfix. For a complete
list of Microsoft Customer Support Services telephone numbers and information about support costs, visit the following Microsoft website:
http://support.microsoft.com/contactus/?ws=support
Besides, there is one easy workaround. If we close the solution and re-open it prior to attempting to re-add the project, we should be able to add it successfully. 
References:
TF10121
Hope this helps.
Regards,
Mike Yin
If you have any feedback on our support, please click
here
Mike Yin
TechNet Community Support

Similar Messages

  • Hi my harman kardon ms 100 dock system speaker won't connect to my iphone4 anymore, keeps say the device is not supported anymore,why, plz can u give a solution

    Hi my harman kardon speaker dock ssytem wont connect to my iphone 4 anymore, keeps saying the device is not supported any more why!, plz can anyone give me a solution to it!

    Hi my harman kardon speaker dock ssytem wont connect to my iphone 4 anymore, keeps saying the device is not supported any more why!, plz can anyone give me a solution to it!

  • Technical Details: The website does not support encryption for the page you are viewing. Information sent over the internet withour encryption can be seen by other people while it is in transit

    Technical Details:
    The website does not support encryption for the page you are viewing.
    Information sent over the internet withour encryption can be seen by other people while it is in transit
    == This happened ==
    Not sure how often
    == started few days ago. previously never happened before.

    I was loading a website, it then stated as below, it wasnt any of the problems stated below.
    SERVER NOT FOUND
    # Check the address for typing errors such as
    ww.example.com instead of
    www.example.com
    # If you are unable to load any pages, check your computer's network
    connection.
    # If your computer or network is protected by a firewall or proxy, make sure
    that Firefox is permitted to access the Web.
    Thus i checked the Page Info, it states that:
    Security Info on page:
    '''This website does not supply ownership information.
    Connection not Encrypted.'''
    Technical Details:
    The website does not support encryption for the page you are viewing.
    Information sent over the internet withour encryption can be seen by other people while it is in transit

  • Error when trying to re-mount a VHDx (the version does not support this version of the file format)

    Hi,
    I have a vhdx on a NAS that I use for server backup. I created the VHDx via disk management, mounted it and assigned drive letter X. I now created a script that gets triggered upon startup via task scheduler to remount the VHD. If I try to mount it however,
    it tells me this:
    No matter what I try, I can't mount it. Double clicking just says this:
    Eventviewer spits out error 137: The default transaction resource manager on volume X: encountered a non-retryable error and could not start.  The data contains the error code.
    How do I trouble shoot this? oO Originally I had created the VHD as expanding, where now I recreated it at it's full size of 900GB. Maybe that will make a difference.
    Thanks for the help
    Cheers
    Maike

    Hi Maike,
    Do you mean that you can mount the VHDX via disk management but cannot mount it via a script? If so, please provide the diskpart’s mount commands in the script.
    In the meantime, check if destination partition is NTFS formatted.
    Problem with Attach VHD function: The version does not support this version of the file format
    http://www.paulauskis.lt/2010/03/problem-with-attach-vhd-function.html
    Please Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there.
    Best Regards,
    Mandy
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]
    Hi Mandy,
    I can not mount it after a reboot. So I create the VHDx via disc management and attach it afterwards without problem. After the server reboots and the attached VHDx dropps, I can't remount it. Gives me the errors I posted above.
    As I had mentioned above, I recreated the VHDx at it's full size this time, rather than expanding. That worked just fine and I can remount after reboot.
    So I consider this dealt with ;)
    Thanks anyway!

  • The platform does not support this application, but does under other account

    Okay the MSI Gaming App works just fine under my own account on my PC on which I am the administrator. So it isn't a driver related issue.
    Last week I created a second account for my son as he also like to play some games but I dont want him messing up my account.
    I wanted to start the MSI Gaming App on his account as my son was going to play a more graphic demanding game but the MSI Gaming App is only giving me the warning: the platform does not support this application.
    I checked the Security and Permissions for Authentication they all set like they should which works fine for other software and applications.
    Even when I try to run the app as administrator it keeps coming back with this warning.
    Anyone got clue why? Maybe I'm overlooking something obvious but till now I still didn't get the MSI Gaming App to run like it should. Some help please.

    Quote from: JLio01 on 11-December-14, 14:49:39
    1. What's your App version?
    2. What's the mobo/vga/specs of your son's pc?
    First of all thanks for the replies and future replies.
    1.
    Version 1.0.0.18
    2.
    My sons has his own profile/account on my pc so the hardware config and installed drivers are exact the same. And on my profile the App is working fine. So it has nothing to do with mobo/drivers/vga/specs. I already had installed the App before I created his own profile. As administrator I added all the needed permissions to the MSIGamingApp Properties Security Tab. Like I did with all other software he is running on his profile and which are working just fine. For example Teamspeak, Mumble, Several games, MSOffice and so on. I even set the Permissions to Full Control like on my Administrator profile. At the Permission Entry for MSIGamingApp I let the permissions be inherited from the parent object my administrator profile.
    If I would re-install and if during the installation windows would ask for whom the software should be accessible. I only would let Windows do exact the same as I did as administrator in the App Properties Security Tab. That the nice thing about being an admin. Create profile, set permissions and let users on your pc or network access software and applications already installed on the network. So that is why I find it weird this doesnt work.
    Also running the MSIGamingApp as Administrator on his profile gives the exact same warning.
    I do know how to add permissions to the security tab have been doing that several years for some job I had once.
    I could use Afterburner maybe but I don't trust him yet with making changes in Afterburner.
    The MSIGamingApp gives just enough controls OC-Gaming-Silent mode.
    And in case of trying a re-install of the App anyone got an url for a new version?
    Might have found it but it isn't on any MSI webpage.
    I did found something on Guru3D but I'm not aloud to post external links.
    Did found a url linking to a Torrent side but my Bullguard AV blocked this site instantly.
    So a clean url would be nice so to say.
    So weird I cant find this software on http://nl.msi.com/search/MSIGamingApp/product/1 or any other MSI site

  • The server does not support the requested critical extension (0x8007202c)

    Hello guys,
    The sympton is the same as the one in "The
    server does not support the requested critical extension." Exception.
    I got the error in calling IDirectorySearch::GetNextRow. As I observe, the error is trigger when retrieving the another page of records. The LDAP path to connect is "GC://<FQDN_of_GC>". The search filter is (&(|(objectClass=group)(objectClass=msExchDynamicDistributionList))(mailnickname=*)).
    There are about 100 thousands of group objects in the forest. So the answer in that thread does not help.
    Any thoughts?
    Thanks.
    [email protected]

    Hi Michael,
    Thanks for your remind of the server is Windows 2008 R2. 
    After deep research on this topic, there were a couple of possible causes. One was based on asking AD to do sorting on the results of the query. Our calls to AD do not do any sorting at all. The other I came to was a couple of pages that may help alleviate
    the problem of groups in large AD environments. It has to deal with the temporary table size that Active Directory uses, with the tunable parameter MaxTempTableSize.
    The articles as below are for your reference:
    http://social.technet.microsoft.com/Forums/en-US/exchangesvradmin/thread/95bfb95f-4e43-4dd8-ac3a-0c89d2cf528e
    http://support.microsoft.com/kb/315071
    http://msdn.microsoft.com/en-us/library/ms677927(VS.85).aspx
    Besides, if the above is not the cause of our issue, there may be something wrong in the C# code. Since I just an AD engineer and not familiar with the C# code, I suggest you should involve one C# code engineer to work with us about this issue. After doing
    many research, please add the class of the object when searching. For example, “DirectorySearcher ds = new DirectorySearcher(de, filter,class)”. I’m not sure if it’s correct, just a suggestion.
    Hope to hear good news from you soon. Happy X'MAS day!
    Best regards,
    Bryan

  • Shared VHDX on CSV... Error opening handle for initiator The request is not supported.

    Hi. Im having an issue in my lab testing out the shared vhdx functionality of 2012 R2.
    The hardware is as follows2x HP DL380G5 with 2xHP P800 Smart Array controllers 2x500GB SATA SSD 2x1TB SATA HDD. Ive used Starwind to create 2 Cluster Shared Volumes on which my shared VHDX files are.
    The issue im having is that after the creation of shared vhdx files (3-4 hours) any failover change in the vm configuration will result in Error opening handle for initiator. Initiator: {460b2b45-2f5a-485f-b045-60b68b655895}. Hostname: HYPERV1. File: \SQL QUORUM.VHDX:SHAREDVIRTUALDISK.
    Error: The request is not supported..
    Ive set the ISCSI sync adapters to "dont allow cluster and client communication" and prevented it being registered in dns (nslookup only shows one ip) yet every shared vhdx has this issue.
    Can anyone suggest if this is a hardware issue or software ? It is such a timesaver compared to multipath io and iscsi on the guests id like to get it working.

    Ok I figured out how to fix this issue, After searching the code online I found a post about someone trying to use this feature and getting the same error code with the vhds on the iscsi disks of a consumer nas which didn't support kerberos authentication.
    Even though I had the cluster setup so the iscsi sync network was set to "do not allow cluster communication" and not used for live migration it was still trying to use this network for the shared vhdx.
    The cause was the network binding order which had the iscsi nic above the server one. After putting the 10.0.0.x server adapter on top and rebooting no more messages appeared in the shared vhdx event log section and failover of the guest
    clusters worked.
    Hope this helps anyone else who has this problem.

  • Getting the message ' The sim is not supported" onFactory Unlock Activation

    My friend bought Iphone 4 from Apple store canada as factory unlock and pay the full price but during activation its giving me an error as The Sim is not supported contact your carrier..... " is this because the set is Locked or there may be chance that my micro sim is not trimmed properly ...??? Plz HELPP im worried paid so much amount and yet its not working....What should i Do ?????

    Can i return the phone after 60 days of purchase as the friend who brought this from canada is going back after a month and its already a month he had purchased it..as i believe that the Iphone has 1 year warranty...Plz correct me if i am wrong...And also please tell me if he had lost the reciept..is there any way he can still return it and get the new one...???

  • I am unable to reinstall Photoshop CS6 (I do have the serial number) on my Macbook Pro 10.9.5 (Mavericks os). and am getting the message "Installation on case-sensitive volumes is not supported.  Please choose a different volume for installation."  I am f

    I am unable to reinstall Photoshop CS6 (I do have the serial number) on my Macbook Pro 10.9.5 (Mavericks os). and am getting the message "Installation on case-sensitive volumes is not supported.  Please choose a different volume for installation."  I am further told that "Adobe apps cannot be installed on case-sensitive drives, you need to Install the product onto an HFS+ or HFSJ non-case-sensitive drive."
    What I don't understand is this:  I originally bought and installed Photoshop CS6 back in March 2013, and it worked fine.  Yesterday my hard drive had to be replaced and my computer person salvaged as much of what was on it as he could, but now I have to reinstall Photoshop.  1) Why did it work before and it's not working now?  2) Is there anything I can do that does not involve reformatting the hard drive?

    It means what it says. The "computer person" formatted it wrongly/ unsuitably. it needs to be formatted again.
    Error "Case-sensitive drives not supported" or similar install error | Mac OS
    Mylenium

  • I'm running snow leopard. The try to open any .mov file in Quicktime, and I get an error message that says, "The document xyz.mov could not be opened. The movie is not in a format that Quicktime player understands. I'm a recent upgrade to Snow Leopard.

    I'm running snow leopard. The try to open any .mov file in Quicktime, and I get an error message that says, "The document xyz.mov could not be opened. The movie is not in a format that Quicktime player understands. I'm a recent upgrade to Snow Leopard.
    Help!
    Thanks, Mark

    Unfortunately, the error message gives no details about what codec might be missing or what it needs.
    If the file can't be opened in QT, it only means you cannot use the QT "Inspector" window to check what compression formats were used to create the file. It does not mean you can't use the Finder "Information" window to check on the compression formats or use a third party media information window (e.g., like VLC which will open many compression formats not supported natively by QT) to determine what kind of data is included in the MOV wrapper. If the file cannot be opened in any app, it is usually a good sign that the file itself is corrupted.
    It's a stupid error message. Apple should do better than that.
    Error trapping is quite extensive but there are still many areas which require human oversight. The message is telling you that either the container has a problem (e.g., not properly terminated, non-standard, or corrupted) or that one or more of the compression formats used is not supported by your current codec component configuration or that the data was encoded using non-standard settings or preferences not supported by QT or that the fourCC code does not match the data contained in the file or that there are timecode inconsistencies, etc., etc., etc. In short there are a near infinite number of possible problems for which it would be very difficult/nearly impossible to program error trapping depending on your sourcing of content and how you process it before it reaches the player app. Think of it like trying to play a BD disc in an DVD player.
    I'll call Apple support when I get a chance.
    Chances are good that they will end up sending you back here. In any case, it is often a good idea to post a sample file for examination by other QT users. At the very least, they should be able to tell you if the sample file will play on other systems which would indicate whether or not the file itself is bad and under the best of circumstances whould allow them to examing the file in detail for various common problems.

  • I am trying to install MasterCollection_CS6_LS16. When I click the install file I get this error message: We've encountered the following issues. Installation on case-sensitive volumes is not supported. Please choose a different volume for installation.

    I am trying to install MasterCollection_CS6_LS16. When I double click the install file I get this error message: We've encountered the following issues. Installation on case-sensitive volumes is not supported. Please choose a different volume for installation. What does that mean? How should I proceed?

    Hey iraravitz,
    Could you please let me know what version of OS are working on.
    You might receive this error when you attempt to install on a drive with the HFS+ Case Sensitive file system, which is not supported for installation of Adobe Creative Suite 6.
    So, please try installing on a drive that has been formatted with a supported file system.
    You might refer the KB doc link mentioned below for the same:
    Error "Case-sensitive drives not supported" or similar install error | Mac OS
    Let me know if this helps.
    Regards,
    Anubha

  • My iPod nano g7 isn't showing up on iTunes although i plug it in. it shows on the computer but not on iTunes. also it won't sync , accept new songs and doesn't  put on podcasts. it is new, i got it for christmas. PLEASE HELP

    my iPod nano g7 isn't showing up on iTunes although i plug it in. it shows on the computer but not on iTunes. also it won't sync , accept new songs and doesn't  put on podcasts. it is new, i got it for christmas. PLEASE HELP

    Hi avmary11,
    If your are having issues with your iPod not being recognized by iTunes (but it is being recognized by the computer), you may find the following article helpful:
    iPod: Appears in Windows but not in iTunes
    http://support.apple.com/kb/ts1363
    Regards,
    - Brenden

  • My iPod Classic is not syncing to my Mac. When I plug it in, it tells me the servers do not support it or something along those lines. It is an iPod Classic 8g, and I bought it used for 30. Any help????

    Today I bought an iPod Classic 8gb for 30 quid. When I bought it (used) of of a friends, it played music fine, I could listen to it, and it worked ok. So I go home to reset it so I can put my account on it, and sync it with all my music I have (I want to use it when I hit the gym instead of using my iPhone), but when I plugges it in and restored it, it finished the restoration but NOW it wont let me sync all of my stuff on to it, and the iPod is completely black. I restored it to Factory settings, it shouldnt be doing this???? When I plug it in , I get an error that says
    "The iPod software update server could not be contacted. The server does not support this version of iTunes."
    Makes me pretty ticked off, like honestly how ******* old is this ******* iPod???
    Im also running version 10.9 on my MacBook Pro
    Picture: http://imgur.com/nTeiJzO

    Perhaps the reason you haven't had any replies is because there is no such thing as an 8GB iPod Classic.
    I suggest that you begin by correctly identifying which iPod you have.
    http://support.apple.com/kb/HT1353

  • Yours sincerely! I just bought a Sony DCR-SD1000 camera only when installing the cd drivers not supported by the operating system Machintosh. I've contacted the seller said the store did not provide for the apple os. How can I move all the files on the ca

    Yours sincerely! I just bought a Sony DCR-SD1000 camera only when installing the cd drivers not supported by the operating system Machintosh. I've contacted the seller said the store did not provide for the apple os. How can I move all the files on the camera the port out is to use a USB data cable to a laptop for my macbookpro can not read the contents of the file and the camera. I also want to use the lens on the camera as a substitute for the embedded camera on my macbookpro, what should I do to replace the embedded camera on macbookpro with sony camera so that the camera could be more variety and can I record when I turned macbookpro . Please help for this so that I can quickly capture the results from sony camera to my macbookpro. Thank you.

    See this page http://macosx.com/forums/networking-compatibility/296947-sony-camcorder-my-mac.h tml - might be some helpful tips there.
    Clinton

  • I have just updated iTunes on my laptop, and now when i plug my iPhone in, the device does not show up in iTunes. I have tried multiple wires and uninstalling and re-installing iTunes. What do i do?

    I've just updated my iTunes on my laptop
    And when i plug my iPhone in, nothing happens and the device does not show up in iTunes
    I have tried numerous cables, uninstalling and re-installing iTunes and searching for devices on iTunes
    And i still have no luck
    help!

    Pick the appropriate one of these for advice:
    Windows - http://support.apple.com/kb/ts1538
    Mac - http://support.apple.com/kb/ts1591

Maybe you are looking for