TFTP Read Access Violation in Snoop while doing network boot

Hi
I have setup my Oracle dhcp server and AI on oracle 11.1.
configure the /etc/ethers and /etc/hosts file as well.
pntadm and dhtam is also setup with macro
I deplou solaris 11.1 AI sparc image as my service
create-client and manifest is also associated as per client machine Mac interface
On client machine
I created the devalias entry for my Nic interface
did now
boot net:dhcp
Requesting Internet Address for 0:e:1E:8:bf:f8
Requesting Internet Address for 0:e:1E:8:bf:f8
Time out waiting for tftp reply
On server machine in snoop its showing
tftp read "01010F19" (octet)
TFTP Error : Access violation
I check tftp service is running on server as below
/usr/sbin/in.tftpd -s /etc/netboot
Please help me i am not able to figure out whats the problem
Thanks

But even on dhcp it doesn't work without setting network-boot-arguments on OBP
If i don't feed any entry in /etc/ethers and /etc/hosts
whenvever I do on client side boot net:dhcp it always give rarp messages in the snoop on server.
What can be the reason.

Similar Messages

Can we access the webview elements while doing automation test??

Hi,
I have 2 textfield on a webview and want to set the value for these two textfields while automating the apps using instruments tool. How can I do that??

You probably would be better off asking questions like this in Apple's developer forums. Most of the people here are just ordinary users, not programmers.
Best of luck.

Tftp access violation when trying to jumpstart a SFV120 from a Sol10U7

Hi, I am trying to build a jumpstart server (boston) for a lab, the machine is a V240 with sol10 U7,
the /jumpstart is a zfs filesystem exported via sharenfs (confirmed mounted in another machine)
I am using the JET on the jumpstart server, the make_client succeded for the client (ucrania) but when
I issue a:
boot net - install - w
the client (ucrania) stalls, so in a snoop from the server (boston) I found:
boston -> ucrania TFTP Error: access violation
? -> (multicast) ETHER Type=0000 (LLC/802.3), size = 52 bytes
ghana.207.153.129.in-addr.arpa -> 224.101.101.101 UDP D=7009 S=7009 LEN=256
? -> (multicast) ETHER Type=0000 (LLC/802.3), size = 52 bytes
paraguay.207.153.129.in-addr.arpa -> 224.101.101.101 UDP D=7009 S=7009 LEN=259
129.153.207.70 -> 224.101.101.101 UDP D=7009 S=7009 LEN=258
? -> (multicast) ETHER Type=0000 (LLC/802.3), size = 52 bytes
ucrania -> BROADCAST TFTP Read "8199CF7B" (octet)
? -> (multicast) ETHER Type=0000 (LLC/802.3), size = 52 bytes
? -> (multicast) ETHER Type=0000 (LLC/802.3), size = 52 bytes
boston -> ucrania TFTP Error: access violation
? -> (multicast) ETHER Type=0000 (LLC/802.3), size = 52 bytes
? -> (multicast) ETHER Type=0000 (LLC/802.3), size = 52 bytes
holanda.207.153.129.in-addr.arpa -> (broadcast) ARP C Who is 129.153.207.114,
holanda.207.153.129.in-addr.arpa ?
? -> (multicast) ETHER Type=0000 (LLC/802.3), size = 52 bytes
ucrania -> BROADCAST TFTP Read "8199CF7B" (octet)
? -> (multicast) ETHER Type=0000 (LLC/802.3), size = 52 bytes
holanda.207.153.129.in-addr.arpa -> 224.101.101.101 UDP D=7009 S=7009 LEN=255
boston -> ucrania TFTP Error: access violation
? -> (multicast) ETHER Type=0000 (LLC/802.3), size = 52 bytes
boston -> venezuela NFS C 4 (renew ) RENEW CL=774a25508c
venezuela -> boston NFS R 4 (renew ) NFS4_OK RENEW NFS4_OK
boston -> venezuela TCP D=2049 S=1022 Ack=3270827737 Seq=3886439810 Le
n=0 Win=49640
? -> (multicast) ETHER Type=0000 (LLC/802.3), size = 52 bytes
ghana.207.153.129.in-addr.arpa -> 224.101.101.101 UDP D=7009 S=7009 LEN=256
boston -> NTP.MCAST.NET NTP broadcast [st=3] (2009-06-12 13:11:44.74520)
? -> (multicast) ETHER Type=0000 (LLC/802.3), size = 52 bytes
paraguay.207.153.129.in-addr.arpa -> 224.101.101.101 UDP D=7009 S=7009 LEN=259
129.153.207.70 -> 224.101.101.101 UDP D=7009 S=7009 LEN=258
ucrania -> BROADCAST TFTP Read "8199CF7B" (octet)
? -> (multicast) ETHER Type=0000 (LLC/802.3), size = 52 bytes
10.11.14.1 -> BROADCAST RIP R (1 destinations)
? -> (multicast) ETHER Type=0000 (LLC/802.3), size = 52 bytes
boston -> ucrania TFTP Error: access violation
I presume it is a problem with basic configuration, but cannot find the cause, so, if
there are any online docs or if there are some test I could/should test, plz point them
out...
thanks in advance
-Oswaldo

thanks, yes,
drwxr-xr-x 4 root root 15 Jun 15 12:20 /tftpboot/
but it seems like the problem is with this machine, maybe its bios/firmware, as I configured another
machine (x86) without touch anything else (that is, no permissions, or other things other than make_template
and make_client) and it worked....
I'll try with another sparc machine ...
thanks
-Oswaldo

Access violation at 0x6d801017 in java.exe

History, so you can guess why it bothers me at all:
When debugging the C++ part of my JNI application occasionally an error
First-chance exception at 0x6d801017 in javaw.exe: 0xC0000005: Access violation writing location 0x003e0d00.
pops up in Visual Studio.
There's no usable call stack, and it happens occasionally only. Ignoring does not seem to hurt anything.
By reducing everything suspicious and trying to find the trigger for this access violation, I noticed it does not have anything to do with my native code. I don't need to reference any native method or even load my library at all.
But it seems to be related to Garbage Collection.
My test now looks like this:
public class TestGCException {
     public static void main(String[] args) {
          TestGCOnly();
     final static Runtime rt=Runtime.getRuntime();
     static String runFinalize() {
          // can be embedded in code or in Expressions window to be run at every debug step
          rt.runFinalization();
          rt.gc();
          return "Finalized at " + (new java.util.Date(System.currentTimeMillis()));
     public static void TestGCOnly() {
          //java.util.Properties sysProps = System.getProperties();
          //sysProps.list(System.out);
          try {
               System.out.print("Press <Enter> after Attach to process javaw.exe :");
               System.in.read();
          } catch(java.io.IOException iox){};
          System.out.println("Starting Test");
          try {
               int loops = 5;
               while (loops-- > 0) {
                    for (int i = 0; i < 100; i++) {
                              Long l = new Long(123456789);
                              Long l2 = -l;
                              l = l2 * 2; // just to avoid "never read" warnings in Eclipse
                         Thread.sleep(3);
                         runFinalize();
                    runFinalize();
                    System.out.print(".");
          } catch (InterruptedException e) {
               System.out.print("!");
          System.out.println(" Done");
} It runs fine, but Visual Studio 2008, when attached, reports about 20 such access violations in those 500 loops.
If interesting, here are some of the System Properties:
os.name=Windows XP
os.arch=x86
java.vm.name=Java HotSpot(TM) Client VM
java.vm.version=14.0-b16
java.runtime.version=1.6.0_14-b08
java.vendor=Sun Microsystems Inc. (: that's why I post here :)Usually I run it in Eclipse Ganymede, but that behavior also shows up when run from a command prompt like
     java -cp . TestGCException
Is there more to say than "Ignore that message, and try to avoid (debugging) native code " ?
Edited by: DataFiddler on Sep 25, 2009 8:45 AM

I have the same problem. I tried several versions of the JVM: update 1, 7, 16 and 17.
Access violations are raised at what seems to be random times. I tried your repro above and can confirm access violations are raised.
Because the JVM handles (and swallows) these errors, I can't debug DLL components accessed through JNI in an optimal manner, since this disturbs the VC++ debugger. If my code does an access violation, the debugger won't tell me where - the application just stops, and the debugging session ends.
Worse, we want to trap all system exceptions in our application in order to make sure we close database connexions properly and release locks, but we can't, as we cannot detect whether an access violation is expected (JVM) or not (our code).

JVM 1.4.2 crash "access violation" Tomcat

Hi
We're getting nasty crashes with JVM 1.4.2_03 (other versions not yet been able to test) and cannot seem to find any log file with more information. However, I do have a DrWatson log which states among other things "access violation".
Situation: We're testing a webapplication on Tomcat (runs as a Windows service (Tomcat.exe) ). During testing the Tomcat-service suddenly ends, the Windows eventlog logs states something like: "...service ended unexpectedly..."
Environment: Tomcat 4.1.29, JDK 1.4.2_03, Windows 2000ProSP4, bi-processor Xeon machine.
While analyzing the DrWatson log file, I can always find the same important (I think) information in the same order:
- function: NtReadFile
- a bit further on: function: NtWaitForMultipleObjects
- function: NtWaitForSingleObject
- etc..
Other snippets I can also find every time are texts like these, they appear in the so called "Stack Back Trace"-sections of the drwtsn32.log:
!JVM_RegisterUnsafeMethods,
!JVM_RegisterPerfMethods,
ntdll!NtDelayExecution,
kernel32!Sleep,
!JVM_Sleep,
msafd!WSPSetSockOpt,
ws2_32!WSAAccept,
ws2_32!accept,
ws2_32!recv,
!Java_java_net_SocketInputStream_socketRead0.
If needed I can post the complete drwtsn32.log file, I only left it out because it's a bad practice to dump long texts. So if you want to take a look, please don't hesitate to ask !
The problem only seems to occur when the servermachine is completely left alone (and not logged in or in locked state) Additionally, it usually occurs after between 30-60 minutes or so. When I keep monitoring (logged in) the machine while the tests are running the crash doesn't seem to occur ?! This makes me think it could be an issue with power-saving that kicks in, like e.g. with the network-adaptor ?
If we don't use JNI, and "access violation"s are stated, does this mean it's a JVM-issue or ... ? Or is it more likely it's an issue of this Tomcat.exe ?
On a sidenote, does anyone know why a logfile might not be produced, and if there is anything i could try to make the jvm produce some intelligable output upon crashing?
Kind regards,
David

Hi again,
First of all thanks for the valuable help so far !
As I'm still searching an anwser for the problem, I noticed the drwtsn32.log file also (sometimes) mentions HotSpot, this is a line from my drwtsn32.log file:
mov ecx,[gHotSpotVMLongConstantEntryValueOffset+0x13f48[/i]
Now, I'm not an expert on HotSpot, but I too know there have been numerous problems reported before with this technology.
Ramesh, it sure looks like your hypothesis about the runtime compilation corresponds to this problem a lot.
Additionally, I must also mention the fact that the problem only seems to occur during stress-tests (concurrency-problem?) and is NOT reproducable reliably. All of this makes me think even more that it's a JVM problem of some kind, what is your (anyone) opinion about this ?
Again, thanks for your support, it sure helps a lot !
Kind regards,
David

Material ledger error while doing GR

Hello,
I am getting the error " Error reading material ledger header record while doing Gr for particular material.when double clicked the error,I see this message "Internal error in function module CKMS_HEADER_READ_WITH_ITAB"
what may be the issue?
Regards
Goutham

HI,
I assume, you got the problem after material ledger activation or Material split valuation
please check the following two points;
There may be one reason, i hope the material is split valuated after creation of PO. Plese check the Material master in the accounting view whether it is split valuation activated or not
2. problem is other side, at the time PO creation, material is having split valuation after that materil was changed to non- split valuation.
With regards
Madhav

Access violation in DirectPathArrayToStream

I've been struggling with a consistent problem with an access violation when issuing OCIDirPathColArrayToStream.
What's most bizarre is that it always fails at the same location, but never with the same block of data.
If I load a table it will fail randomly on the 100,115,901,1200 block etc.
If I have the program successively load small tables one at a time, it will usually throw the violation on the fifth table, right at the beginning, after successfully loading the previous 4 to completion.
It always reads Access violation at address 606D5594 in module 'OraClient9.Dll'. Read of address 00E20000 (this last address changes.) For example, another one:
Access violation at address 606D5594 in module 'OraClient9.Dll'. Read of address 00E80000.
Any help in solving this would be helpful and greatly appreciated. .
Ed

Hello Yann,
thanks for reporting this bug I have made an error entry in our bug tracking system.
After replication you can check the state by this link
http://sapdb.org/webpts?wptsdetail=yes&ErrorType=0&ErrorID=1240790
Regards,
Burkhard

Im trying to convert a PDF into an excel document and I keep getting an error message that reads "An error has occurred while trying to access the service". WHat am I doing wrong?

Im trying to convert a PDF into an excel document and I keep getting an error message that reads "An error has occurred while trying to access the service". WHat am I doing wrong?

it seems my subscription had expired so I signed up again.. It was still having trouble so I repeated the sign up process again.. Then it worked perfectly.. Unfortunately, I think I just subscribed twice and need to cancel one of them. Ugh. Such a pain when I'm trying to get this project completed. I'll be canceling at least one of the subscriptions in the morning. Adobe is not my favorite company right now. None of this was intuitive. And trying to get help was an absolute waste of an hour.
Regards,
Nathaniel
[removed by moderator]

Error Occuring While Processing Data With DIAdem 8.1Exception EAccessViolation in module ntdll.dll at 000111DE. Access violation at address 7C9111DE in module 'ntdll.dll". Read address 37363430

Hello,
We are having an issue running Diadem 8.1 on a new HP XW 9400 with Windows XP SP2. 3 errors have been occuring with frequent crashes, they are:
1) "1Exception EAccessViolation in module ntdll.dll at 000111DE. Access violation at address 7C9111DE in module 'ntdll.dll". Read address 37363430.
2) The instruction at "0x7c9111de" referenced memory at "0x352e302d". The memory could not be "read".
3) ---Error--- DIAdem
Error in Autosequence - processing in line: 74 (IARV_VAR_GET)
Runtime Error while executing command "Iarv2Txt$ := FR(T9,L1)"
Error type: ACCESS VIOLATION
Error address: 000101DE
Module name:ntdll.dll
We are using the same scripts and version 8.1 on a variety of Dell desktop computers (W2K and XP SP2) without any issue, looking for suggestions as this affects no other software on the HP XW 9400 other than DIAdem. Appreciate any suggestions.
Message Edited by swillh on 06-25-2007 08:55 AM

Christian,
I will answer your questions in the text below. Thanks for your help.
Hi swillh,
I also would like to help you.
Unfortunately, The reported access violation in the central Windows ntdll.dll is very unspecific.
May be the following questions will help you to provide me more info.
1. You mentioned that the aut's and - I think - also the accessed text file reside on a server.
Is there a stable network connection?
The server can sometimes be a little slow but the connection is good. This computer is using the same connection that the prior computer utilized without issue.
Are the files accessed by multiple clients simultaneously?
It is possible that more than one computer can be accessing the same file, but again, this has never been an issue. We are reading the files only, not writing to them.
The processing routines we are running have used for over 5 years without any issues until adding this computer.
Is the text file read by one client while another client is writing the same file?
No, files are "read only"
2. Have you already tested opening the file with the FileOpen command before calling FR?
Yes
Do you see any chance to convert the aut to a vbs file? This gives you more alternatives in accessing text files.
3. What do you mean with "processing ATD's with 30 or more channels of data"? Where is the relation between ATD files and data channels?
Processing Crash Dummy data with file sets low in channel count (15 channels) result in successful processing without any crashes or access errors. When processing dummies with more than 20 channels we sometimes encounter these issues. The higher channel count may be the only common factor I can find in these faults.
Steve
Message Edited by swillh on 07-09-2007 08:44 AM

Access violation reading location 0x00000661.

Hi, I have this following code here:
int *Fibonacci = new int[];
Fibonacci[0] = 1;
Fibonacci[1] = 1;
Fibonacci[2] = 2;
int FinalVal = 0;
int Iter = 3;
while (FinalVal<10^9)
Fibonacci[Iter] = Fibonacci[Iter - 2] + Fibonacci[Iter - 1];
cout << Fibonacci[Iter] << endl;
FinalVal = Fibonacci[Iter];
Iter = Iter + 1;
delete [] Fibonacci;
and the application keeps screaming about Access violation reading location 0x00000661. I've already tried using Call Stack and all I can know that it's crashing down at Index 16 (1597 number of fibonacci). I've no idea why it stops in this particulary
moment, any suggestions?

On 2/9/2015 5:28 PM, Alieniasty wrote:
[code]
int *Fibonacci = new int[];
This allocates just one byte (I'm surprised it even compiles; I'm pretty sure it shouldn't). You must specify the size for the array you want to allocate.
while (FinalVal<10^9)
10 ^ 9 doesn't do what you think it does. ^ is a binary-XOR operator. It so happens that 10 ^ 9 == 3
Igor Tandetnik

TFTP Host Error: Access violation

Hi guys,
I am pretty new in this forum.
I've been using MACBOOK and MAC OS X since middle 2009.
I am using the host tftp server to upload files into my embedded boards.
This time i upgraded do Snow Leopard and tftp does not work anymore.
I always have the following message: Host Error: Access violation.
I tried many thing but i can not solve this puzzle.
The following is what i tried:
1) chmod 777 all the folder and files;
2) Allow all users to conect the TFTP folder (in System Preferences);
3) Firewall is on now, but even with firewall off I have the same problem;
3) I tried to check the file tftp.plist (System/Library/LaunchDaemons) and i noticed two major differences: a) It was written DISABLED and b) the flag was for secure -s. Well i root and changed the file with ENABLED and -i insecure, but nothing changed. The strange thing also is that after i star the computer the back to its normal like the changes i made weren't saved, but i was root and they saved.
I am also using the TFTP Server 3.3.1 from Mr Fabrizio Larosa. Permissions and other stuff are ok when using this software.
Am i forgetting something special?
Can somebody help me? I do not know what to do anymore.
Thanks volks.

Yes i know that there is no TFTP in System Preferences:
What i meant is that I configured the sharing permissions in System Preferences for the TFTP folder i am using. For example, my folder is: /Volumes/Ncb002D/00_TFTPbootFiles. Fro that i used the System Preferences and added the folder.
Ok i understand that, so how can assure i can have my TFTPserver Enabled using launchctl and how can i change it from secure to insecure? More than that i am loosing my hair, i need the TFTP working. Without that i can not transfer files to my embedded board.
Last version was working. I was using Leopard and everything was ok, the TFTP was working. After i changed to Snow Leopard i can not do anything without a Host access error.
So i compared the 2 tftp.plist files, Leopard working and Snow Leopard not working. As i wrote the major differences are: ENABLED tag in first line and -s tag (secure mode) in tftp.plist for Snow Leopard. In Leopard the tftp.plist has no ENABLE tag and it is by default -i (insecure).
I really do not know if that is the reason, i just do not know what to do to get this to work.

Error while executing "" command Error type ACCESS VIOLATION Error Address: 0006898E Module name:gfsdesk.DLL

Hi All,
I'm using diadem from .net Program. While on the run I'm getting the following error.
Error While executing "" Command
Error type ACCESS VIOLATION
Error Address: 0006898E
Module name:gfsdesk.DLL
Anyone have any idea why this is happening?
regards,
Swaroop

Hi Swaroop,
It would be helpful to better understand what your code really does. The information that you called DIAdem from your enviroenment is not yet sufficient to understand what the problem might be.
Andreas

What does this error mean? Error: Access violation at address 0053DD46

I am trying to run diff reports using batch scripts, and its very puzzling that some of the diff report scripts within the batch script are running and some are not, there is no consistency to what is getting errored out.
I then tried running them manually in foreground on the client and I get the same issue. Has anyone encountered this issue? What do I make of it?,
4/24/2013 1:29:30 PM - *** MDMConnect starting ***
4/24/2013 1:29:30 PM - Logged in successfully.
4/24/2013 1:29:30 PM - Started export job for PLN_FLD_ACCT_DIFF
4/24/2013 1:29:34 PM - ERemotableException with message: "Server was unable to process request. ---> Error during Export. Export was unable to run. Error: Access violation at address 0053DD46 in module 'mdm_ntier_engine.exe'. Read of address 00000024" while running Export
4/24/2013 1:29:34 PM - => ERROR: Data Relationship Management Server returned error: "Server was unable to process request. ---> Error during Export. Export was unable to run. Error: Access violation at address 0053DD46 in module 'mdm_ntier_engine.exe'. Read of address 00000024."
4/24/2013 1:29:34 PM - *** MDMConnect stopping ***
Thank you
Tanuja Donavalli

This is issue is coherent in DRM version 11.1.1.2
Whenever a property is deleted, the references to that property would still exists/stored in tables. The next version of DRM is made to address this issue, where in it takes care of removing all references whenever we delete the property.
Cause: Properties was deleted from DRM client but the value was still stored in the compare table for Difference export and causing export to fail.
Solution: Need to recreate the deleted properties and remove the properties in the exports and delete the properties.
Going Forward: Instead of deleting the properties we need to remove the property from the export and hide the property.
Hope this helps.

Access Violation while initialising WEBUTIL on Ora9iDS

Hello,
as part of an urgent evaluation I installed WEBUTIL as described in the documentation, did the additional steps described in the readme and added WEBUTIL as described to an existing form. Now the form raises an access violation error while executing trigger WHEN-CUSTOM-ITEM-EVENT on item WEBUTIL.WEBUTIL_FILETRANSFER_FUNCTIONS exactly when calling procedure WEBUTIL_CORE.CustomEventHandler while registering the beans.
Did anybody experience the like? Any guess what's going wrong or what could help?
The crash is documented in the log as follows:
[09/09/03 08:38:46 Westeuropäische Sommerzeit]::Client Status [ConnId=0, PID=3048]
     >> ERROR: Abnormal termination, Error Code: C0000005 ACCESS_VIOLATION
======================= STACK DUMP =======================
Fault address: 60A98D4D 01:00097D4D
Module: E:\Programme\OraHome1\bin\orapls9.dll
System Information:
Operating System: Windows NT Version 5.0 Build 2195 Service Pack 4
Command line: ifweb90 server webfile=HTTP-0,0,1,53.147.33.61
FORM/BLOCK/FIELD: DOKUMENTE:DOKUMENTE.KLARTEXT
Last Trigger: WHEN-CUSTOM-ITEM-EVENT - (In Progress)
Msg: <NULL>
Last Builtin: NAME_IN - (Successfully Completed)
Registers:
EAX:00000000
EBX:0012D9C0
ECX:00000000
EDX:0012D9C0
ESI:0777C6E4
EDI:02A26C78
CS:EIP:001B:60A98D4D
SS:ESP:0023:0012D978 EBP:0012D998
DS:0023 ES:0023 FS:003B GS:0000
Flags:00010246
------------------- Call Stack Trace ---------------------
Frameptr RetAddr Param#1 Param#2 Param#3 Param#4 Function Name
0x0012d998 60a3d308 0777c6e4 00000001 0012d9c0 070468a8 pfrb1assign_aad2va
0x0012d9ec 60a92b11 0777c6e4 00000001 66020030 070468a8 pevmGBVAR+d8
0x0012e0f0 60a1ce7d 0777c6e4 02a26c78 0776dd6c 00000002 _pfrrun+6841
0x0012e158 6601ea45 02a26c78 0777c6e4 02a46f00 029de3b4 _peicnt+ed
0x02a26874 029de3b4 65fdb2a0 65fdb2e0 65da1f30 00000000 0x6601ea45
0x02a46f00 00000001 0000000a 02a46fd8 0026181f 65d51752 0x029de3b4
------------------- End of Stack Trace -------------------
WebUtil-Logfile is not very verbose (despite detailed logging enabled):
53.147.33.61:ZSCHAU: Connection from Form=E:\ISAP_ASP4\isap\websourcen\Doktestweb.fmx Client O/S=Windows 2000 locale=de
53.147.33.61:ZSCHAU: 2003-Sep-09 08:38:00.889 WUF[VBeanCommon.getIPAddress()] 53.147.33.61
53.147.33.61:ZSCHAU: 2003-Sep-09 08:38:00.929 WUH[VBeanCommon.getIPAddress()] 53.147.33.61
53.147.33.61:ZSCHAU: 2003-Sep-09 08:38:00.949 WUS[VBeanCommon.getIPAddress()] 53.147.33.61
Java Console prints:
JInitiator: Version 1.3.1.9
Verwendung der JRE-Version 1.3.1.9 Java HotSpot(TM) Client VM
Home-Verzeichnis des Benutzers = C:\Dokumente und Einstellungen\zschau
Proxy-Konfiguration:Automatische Proxy-Konfiguration
JAR cache enabled
Location: C:\Dokumente und Einstellungen\zschau\Oracle Jar Cache
Maximum size: 50 MB
Compression level: 0
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
l: dump classloader list
m: print memory usage
q: hide console
s: dump system properties
t: dump thread list
x: clear classloader cache
0-5: set trace level to <n>
Loading http://localhost:8888/forms90/webutil/webutil.jar from JAR cache
Loading http://localhost:8888/forms90/webutil/jacob.jar from JAR cache
Loading http://localhost:8888/forms90/java/f90all_jinit.jar from JAR cache
RegisterWebUtil - Loading Webutil Version 1.0.2 Beta
connectMode=HTTP, native.
Forms Applet-Version : 90290
2003-Sep-09 08:38:00.819 WUI[VBeanCommon.findLocalHost()] obtaining LocalHost info from InetAddress
2003-Sep-09 08:38:00.839 WUI[VBeanCommon.getIPAddress()] 53.147.33.61
2003-Sep-09 08:38:00.879 WUF[VBeanCommon.findLocalHost()] obtaining LocalHost info from InetAddress
2003-Sep-09 08:38:00.889 WUF[VBeanCommon.getIPAddress()] 53.147.33.61
2003-Sep-09 08:38:00.909 WUH[VBeanCommon.findLocalHost()] obtaining LocalHost info from InetAddress
2003-Sep-09 08:38:00.929 WUH[VBeanCommon.getIPAddress()] 53.147.33.61
2003-Sep-09 08:38:00.939 WUS[VBeanCommon.findLocalHost()] obtaining LocalHost info from InetAddress
2003-Sep-09 08:38:00.949 WUS[VBeanCommon.getIPAddress()] 53.147.33.61
2003-Sep-09 08:38:00.969 WUT[VBeanCommon.findLocalHost()] obtaining LocalHost info from InetAddress
2003-Sep-09 08:38:00.969 WUT[VBeanCommon.getIPAddress()] 53.147.33.61
2003-Sep-09 08:38:01.460 WUO[VBeanCommon.findLocalHost()] obtaining LocalHost info from InetAddress
2003-Sep-09 08:38:01.470 WUO[VBeanCommon.getIPAddress()] 53.147.33.61
2003-Sep-09 08:38:01.500 WUL[VBeanCommon.findLocalHost()] obtaining LocalHost info from InetAddress
2003-Sep-09 08:38:01.510 WUL[VBeanCommon.getIPAddress()] 53.147.33.61
2003-Sep-09 08:38:01.550 WUB[VBeanCommon.findLocalHost()] obtaining LocalHost info from InetAddress
2003-Sep-09 08:38:01.560 WUB[VBeanCommon.getIPAddress()] 53.147.33.61
2003-Sep-09 08:38:48.268 WUB[VBeanCommon.destroy()] WebUtil Browser Functions being removed..
2003-Sep-09 08:38:48.298 WUL[VBeanCommon.destroy()] WebUtil C API Functions being removed..
2003-Sep-09 08:38:49.59 WUO[VBeanCommon.destroy()] WebUtil Client Side Ole Functions being removed..
2003-Sep-09 08:38:49.89 WUT[VBeanCommon.destroy()] WebUtil File Transfer Bean being removed..
2003-Sep-09 08:38:49.89 WUS[VBeanCommon.destroy()] WebUtil Session Monitoring Facilities being removed..
2003-Sep-09 08:38:49.89 WUH[VBeanCommon.destroy()] WebUtil Client Side Host Commands being removed..
2003-Sep-09 08:38:49.99 WUF[VBeanCommon.destroy()] WebUtil Client Side File Functions being removed..
2003-Sep-09 08:38:49.99 WUI[VBeanCommon.destroy()] WebUtil GetClientInfo Utility being removed..
I run Ora9iDS on a Windows2000 system.
Thanks to anybody who tries to help.

Hello, Grant,
the crash occurs before I try to do anything vital. There is some init stuff in the form (initialising items, global variables etc.), query execution for initial displaying of database entries and a sychronize statement. After that the triggers in the WEBUTIL section fire, as I understand to initialise the beans (registering). As part of this registering the crash occurs - before I call any of the WEBUTIL functionality from my own code.

Error while reading access data (URL, user,password) for the Adapter Engine

Hi,
Any idea on below message? I am doing file to file scenario and got the below tarce from sxmb_moni.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">AE_DETAILS_GET_ERROR</SAP:Code>
<SAP:P1>af.pi1.piserver1</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>no_messaging_url_found: Unable to find URL for Adapter Engine af.pi1.piserver1</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while reading access data (URL, user, password) for the Adapter Engine af.pi1.piserver1</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Thanks
Balaji

It looks like the adapter engine is not able to register him self on SLD, you have to check in the SLD the "Exchange Infrastructure" domain, you have to verify restarting the J2EE the adapter engine update the entries in the SLD related to the specific XI Domain.
Launch Visual Administrator >> Server >> Services >> SAP AF CPA Cache
Enter the appropriate values for:
SLD.selfregistration.hostname (Use fully qualified hostname)
SLD.selfregistration.httpPort
SLD.selfregistration.httpsPort
Sandro

TFTP Read Access Violation in Snoop while doing network boot

Similar Messages

Maybe you are looking for