That application could not be lanched for debugging. ensure that the target device screen is unblock and that the application in installed

what is the problems?

Hi windows phone app can not debugging,
>>that application could not be lanched for debugging. ensure that the target device screen is unblock and that the application in installed.
Based on the error information, it seems that you are trying to deploy the application on the Windows Phone Device. Then what Windows Phone OS are you using? Can you run
the application by using the Windows Phone Emulator?
For deploying the application on the Windows Phone Device, first please try to make sure you have registered your phone for Windows Phone development. For more information, please refer to:
https://msdn.microsoft.com/en-us/library/windows/apps/ff769508(v=vs.105).aspx .
After that please try to make sure that phone screen is unlocked and the project you want to run is set as the default Startup project.
Besides, please try to refer to the following article about how to deploy and run apps on a Windows Phone device:
https://msdn.microsoft.com/library/windows/apps/ff402565(v=vs.105).aspx#BKMK_device .
Best Regards,
Amy Peng
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Similar Messages

When I go to download my iMovie to iTunes I get the following message "Unable to prepare project for publishing. That project could not be prepared for publishing because a error occurred"(disk full). What do I need to do?

When I go to share my Imovie to Itunes after a couple of hours I get the following message. "Unable to prepare project for publishing. That project could not be prepared for publishing because a error occurred(disk full)". What does this mean and how do I fix it?

This is the forum for iOS (iPhones and iPads),
I have refered it to get moved to the correct forum.
But my guess is that you have to clear space on your harddrive.
The video gets rendered when you out put it, so you will need lots of space to do so.

My itunes says that it is not correctly localized for this language please run english version. how do i do that?

my itunes says that it is not correctly localized for this language. please run english version. how do i do that?

Let's try a repair install of iTunes.
Restart the PC first.
If you're using Vista or 7, now head into your Uninstall a program control panel, select "iTunes" and then click "Repair".
If you're using XP, head into your Add or Remove Programs control panel, select "iTunes", and click "Change". Select "Repair" and click "Next" as per the following screenshot:
Can you launch your iTunes now?

Hi, when I go to "select files to send" and click on "sent files" I get: "Internal Server Error (500) Your request could not be completed due to an internal server error". I tried rebooting and that didn't work. Any help would be appreciated. Thanks.

Hi, when I go to "select files to send" and click on "sent files" I get: "Internal Server Error (500) Your request could not be completed due to an internal server error". This never happened b4. I tried rebooting and that didn't work. Any help would be appreciated. Thanks.

Hi ,
Thank you for your question.
This error was caused by the incorrect site binding, I will give a reference of my test Lab. We add two A records in DNS which the FQDN of CAS and Mailbox could resolve IP address.;
Default Web Site:
Exchange Back End:
Then IIS must be restarted.
If there are any questions regarding this issue, please be free to let me know.
Best Regard,
Jim

After many hours of "rendering", the message appears that"--could not be prepared for publishishing because an error occurred error code= -34" What does this mean?

After many hous of "rendering" the message appeared that "--could not be prepared for publishing because an error occurred error code= -34"

re-post in the iMovie forum where all the people that use that software are. This is the Lion 10.7 forum.

I installed itunes 10.5 in my PC to sync with my ipod touch 4G but it's giving me error that itunes could not connect to itnues store.Make sure network connection is active and try again...I'm connected to internet though, please help!

I installed itunes 10.5 in my PC to sync with my ipod touch $G but it's giving me error message that itunes could not connect to itunes store..."make sure network is active and try again." I'm connected to internet though so I don't understand please help!

Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US

Unable to prepare project for publishing. the project could not be prepared for publishing because an error occurred. (project is too long)

I have an imovie project that is less than 20 minutes long. i tried to publish it a couple of times and it seemed like it was finished but it never published. i tried one more time and got an error message saying "unable to prepare project for publishing. the project could not be prepared for publishing because an error occurred. (project is too long)". i know the project isnt too long. i am trying again but the error message only comes up after i waited 2 hours for it to finish publishing. PLEASE HELP

oh and ive tried publishing to almost everything. straight to idvd, to media browser, i tried both hd qualities and also the large quality. no luck with any of those

Could not get response for challenge?

I could succefully use podcast capture to post video to groupblog.
But when I used command line "pcastaction groupblog", it always said that
"ERROR: could not get response for challenge"
But "pcast_post2groupblog" works well for me. I wonder why this happened?
P.S:
I've updated my server to the latest version.

If you look at the workflow, there is probably something in there like this:
<string>--otp=##Groups Administrator Username:Groups Administrator Password##</string>
That's a one time pad. I ran into this when troubleshooting our iTunes U workflow from the command line. To get my iTunes U stuff to work from the command line I had to generate a OTP each time, like so:
$sudo pcastconfig --add_access "token" --properties "iTunes U Shared Secret"
Except yours will be different because it's for group blog.... if indeed this is your problem. I only guessed this looking at the stock blog workflow, it uses an OTP.
Hope that was helpful and not way off the mark.

Could not find IUIBaseCommand for alias Error

Hi everyone,
I developed a new UI Command in KM, but I get the following error in the "default trace":
Could not find IUIBaseCommand for alias
What does mean ?
Thanks & Regards,
Hassan

Hi,
most probably that means you are trying to use command (in some command group or so) which does not exist or is wrongly registered with different alias. It should be logged in the error message what is the alias it can not find.
Best,
--epexpert

The project could not be prepared for publishing because an error occurred.

I have just loaded iLife 09 on my MAC. I've edited a movie and now want to export it, put it in iTunes, whatever I can do to move it beyond my laptop. No matter what option I choose under Share I get the same error message, "The project could not be prepared for publishing because an error occurred. (-2009)". I can find the error message online, but not the (-2009) error code. I'm also a longtime PC person who has just switched to a MAC. Can anyone help?

I also am having the exact same problem. iMovie '09. I have tried changing permissions on all sharing folders, exporting to desktop, sharing to iTunes in all size files - and yet still get "Unable to prepare project for publishing. error (-2009).
Mac OSX version 10.6.2 Snow Leopard

Error -Account 'Down-payments clearing account' could not be found for area

When I am trying to pass a down payment entry by debiting vedor and crediting bank with asset it is giving an error as follows.
Account 'Down-payments clearing account' could not be found for area 01
Message no. AU133
Please help me to rectify the same.
Thanks in advance
Deepak

HI
Please pay attention at the possible causes of message AU133:
1. Error AU133:
   a) You have not defined a contra account for acquisition value postings in the Asset Accounting Customizing settings (Transaction AO90).However, this is required as of Release 4.6C because, as is the case for all other integration postings in Asset Accounting, invoice receipt postings have to be displayed in Asset Accounting via the new posting kernel to ensure an identical document
structure.
   b) You have defined the account in Asset Accounting, however, it is not created in the affected company code.Check whether the account is correct and create it for the company code, if necessary.
2. You have entered an asset reconciliation account for the "Contra account: Acquisition value posting" (for example, the same account as for   "Acquisition:Acquis. and production costs" account).This is not permitted.Check whether your account determination is correct
   (Transaction AO90) in Asset Accounting Customizing. The same applies
   for the 'Contra account: Down payment posting'.
3. As "Contra account: Acquisition value posting" you entered an asset G/L account. If necessary change the automatic posting indicator in the G/L account master record.
4.Check if you need revaluation accounts in depreciation areas involved   (AO90):
-Revaluation acquis. and production costs
-Offsetting account: Revaluation APC
Please run also programm RACKONTO where missing or wrong customizing
the accoutn determinations per company code is displayed
Also have a look at note 7595 in this regard.
Please assign points if it useful.
Regards
Ravinagh Boni

Java.lang.Exception: Could not get name for DC project

Hello Experts,
We have a code which is downloaded from SVN repository.
I have imported the code from my desktop into NWDS and when I try to deploy it throws,
java.lang.Exception: Could not get name for DC project
I have referred few threads in SCN and solution suggested is to change the workspace and create a new DC & copy the _comp from old DC.
I tried the above solution but there are lot of build errors as we have few RFC models and it is throwing build errors for missing model reference.
Kindly help me on how to fix the error.
Thanks, Swarnaprakash

Dear Swarnaprakash,
The Web Dynpro DCs Import C:\----\user\.dtc\LocalDevelopment\DCs\sap.com\test and
the related package for DC is missing once check it after try to import.
Depending on which Java compiler preferences are set, you may see some
warnings in the "Task" view after importing the project. If the severity level for problems of type "Unused imports" (set in Preferences – Java – Compiler) has the value "Warning", the compiler will issue a warning for unused import references. Ignore these warnings!
Still You getting means delete your .metadata before take the backup.after open the NWDS again it will set new configurations in your system.
Thanks & Regards,
Durga Rao.

I am using numbers but I am not able to update numbers and I get error that you could not able to download this app.

I am using numbers but I am not able to update last version of numbers. When I try to update that I get error that you could not able to download this app. So what should I do?

Try running the combo update.
10.9.2
If that works and it still shows as an update, try re-indexing Spotlight.
Spotlight – Re-index

I am trying to open my iTunes on a Windows XP laptop and get the error message 42404 "iTunes application could not be opened. Please repair or reinstall QuickTime". I did that and it did not help. Any ideas?

I am trying to open my iTunes on a Windows XP laptop and get the error message 42404 "iTunes application could not be opened. Please repair or reinstall QuickTime". I did that and it did not help. Any ideas?

Let's see if a more rigorous uninstall/reinstall procedure gets us past that, nancy. See the following troubleshooting document:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP

APEX SSO and Load balancing: Could not determine workspace for application

We had a single HTTP Server serving APEX in a 10.2.0.2 database configured with SSO to be used by the developers. APEX has been registered as a partner application and the login url has been CA Siteminder protected so that the SM_USER details are forwarded in the header for the application to use for authorization. Everything is fine so far.
Now we have added a HTTP Server on another host and have it all set up for APEX and its pointing to the same database. APEX_ADMIN access works as normal, but applications previously using SSO now get the following error after entering the URL.
Expecting p_company or wwv_flow_company cookie to contain security group id of application owner.
Error ERR-7620 Could not determine workspace for application ().
Using HTTP Watch I find that the application is not even trying to redirect to the login page.
What is wrong here?

APEX has been registered as a partner application as described in
http://www.oracle.com/technology/products/database/application_express/howtos/sso_partner_app.html
In the meantime I found metalink document 368746.1 which describes the cause of this problem. Please read carefully what I wrote, it all works when the the new APEX web server is turned off in the server farm on the load balancer and directed through the original web server. When running regapp.sql the hostname in the listener token was using the virtual hostname. This works fine if the request comes from the original APEX server which proofs that there is nothing wrong with the installation and set up of SSO. When directing the request to the new APEX web server the APEX_ADMIN page still works only existing work spaces using SSO don't seems to work anymore resulting in a error as described in the subject.
As for metalink document 368746.1 naming the causes of this error:
- there are no duplicate entries in WWSEC_ENABLER_CONFIG_INFO$
-LISTENER_TOKEN clearly works for requests coming from the first web server
-theoretically the web server listener port could be changed from 7777, but port 80 needs to be maintained here as production is mimiced as far down as possible.
Is there some cache table which can be cleared? How is it that the flows schema (apex engine) can not find the work space when the request comes from a new web server which can however access the APEX_ADMIN pages.
anyone?

That application could not be lanched for debugging. ensure that the target device screen is unblock and that the application in installed

Similar Messages

Maybe you are looking for