That sends me this error: There was an error communicating with the server, try later when I want to create a new Keynote presentation?

good day !!! I am trying to create a new presentation in keynote,
when selected sends me the following message: An error occurred while communicating with the server, try again later. I tried for
several days to make the presentation but I keep sending the same message. I'm trying to make it from the keynote
beta (from iCloud)

This is the Mac discussion, post your issue in the iWork iCloud discussion where folks who use iCloud can help you.
iWork iCloud Discussion

Similar Messages

Error : There was a problem communicating with the Group Pickup backend database.

Hi ,
I found this error in Event viewer for Every 2 min on lync server 2013 :
There was a problem communicating with the Group Pickup backend database.
There were problems accessing SQL server:
Connection: Data Source=(local)\rtc;Initial Catalog=cpsdyn;Integrated Security=True
Message: The EXECUTE permission was denied on the object 'DbpGetVersionSchema', database 'cpsdyn', schema 'dbo'.
Error code: -2146232060
Error number: 229
Cause: This may be caused by connectivity issues with the backend database.
Resolution:
Check if SQL backend is running and accepts connections from Group Pickup.
what can i do ?

Hi,
Did you solve the issue with the help of the suggest Anthony provided above?
If the issue persists, please check if you update the latest vesion of Lync Server 2013. If not, please update it, make sure after install the update for all FE Servers,
then make sure to update BE Server as well. Then rerun Step 2 Setup or remove Lync Server Components.
Here is a similar case may help you:
https://social.technet.microsoft.com/Forums/lync/en-US/3b616e51-93ad-430a-aa93-57c2fd19e0f6/call-pickup-db-issue-after-cu1-update-to-lync-2013-enterprise?forum=lyncdeploy
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Error message "there was a problem communicating with the server"

for about a week or so now, when I connect to my bank website everything is verrrry slow and when I finally get through the log in steps the error message shows on the site. Sometimes I can complete the task at hand, although it takes forever. Other times the screen just stays with the spinning wheel and I end up closing the browser. I've cleared the history and cache. I've made sure to have only one firewall/ virus protection activeated. I've reset Firefox. The pages populate faster now, but still slower than before. Not sure what's going on.

You might try to disable some or all of your extensions/add-ons or plugins such as content blockers etc., restart FF, then selectively re-activate one by one.
This has helped me a few times finding out what makes FF slow.

I just recieved my Iphone yesterday, and today I was reading somthing off of Safari and recieved "error:there was a problem communicating with the secure web proxy server (HTTPS)" .Now I get this whenever I try opening any of my apps. Even my facebook app

I have never done this before so I do not know if I am even doing this correctly. Anyways, I cleared my history and cookies! I even deleted many apps thinking it might of been from them. I have even turned my phone off for a good thirty minutes. THe last thing I did was set my network settings to default.
I dont know what to do. Since I changed my network settings to default I turned my phone off again. I might just restore all setting to default and go from there..and if this doesnt work, I will just return the iphone for a different one I guess.
this is from my IPHONE4s

Attached is Dennis Linam’s Audition – “Log File” and “Log – Last File”
Contact information Dennis [email protected]
Previous contact information with your organization (DURIM):
Dennis - i just finished my audition trial and bought the subscription the 2014 version.
created by durin in Audition CS5.5, CS6 & CC - View the full discussion
DURIM - Okay. I would expect the "Cache Warning" message because your default directories would not be the same as the ones in the settings file I generated.
If you go back to the "7.0" directory and open the "Logs" folder, can you copy the "Audition Log.txt" file and send it as an attachment to [email protected]? We'll take a look in that logfile and see if it gives us more information about why this is failing now.
Also, do you have any other Adobe applications installed on this machine, such as Premiere Pro? If so, do they launch as expected or fail as well?
I do have the trial Pro version of Adobe reader, but I have not activated it, because I fear the same thing will happen did it. I cannot afford to activate the subscription for that product and take the chance of it not working either. I depend on those two programs religiously. Here is the files that you requested. I appreciate any help you can give me to get this audition program started
Audition Log- file
Ticks = 16 C:\Program Files (x86)\Common Files\Adobe\dynamiclink\7.0\dynamiclinkmanager.exe
Sent from Windows Mail

There was a problem communicating with the screenshot service, please try again later.

I've used browser lab for months without issues until late last month it keeps showing me this error:
There was a problem communicating with the screenshot service, please try again later.
I have to retry 3-5 times before I can get it to load the page.
I'm accessing browser lab through firefox 13.0.1 Mac OS X 10.7.4

Hi,
We've had some problems with some of the backend systems we use and have had some accounts get into bad states. Can you please try it again until you see the problem, then respond with:
The AdobeID you use to login to BrowserLab with (don't post your password).
The date, time, and timezone of when you saw this error message.
Thanks, that will let us dig into the logs, see what they tell us and look into your issue further.
Mark

Safari cannot open the page ~ The error was: "There was a problem communicating with the web proxy server (HTTP)

Help! I was cruzing along just fine and went out tonight only to receive the message above:
Cannot open Page
Safari cannot open the page
The error was: "There was a problem communicating with the web proxy server (HTTP)."
I have had all the Apple iPhone phone. Have never encountered anything like this.
All systems are GO as soon as I log on to wifi.
Can anyone help, please.

I am also fixed. I also loaded Onavo, but that was the other day ... this is what I did with the help of online chat with AT&T ...
I went to:
Settings
Wifi
I selected the network I was working on by hitting the blue arrow located on right side
At the detail page of that network I scolled down to the bottom to find HTTP Proxy boxes
I was on Off and changed it to Auto and it worked!
I was soo jazzed!!
Instructions said if it was already on AUTO, to change it to Manual and make your Port = 80 but I didn't have to do that!
YIPPIE!! I'm a new man!!
Go to settings -----> WI-FI -----> select the network you're using ------> hit the blue arrow located on the right-side of the network name (ie: show details of that network), this takes you to another page.
--------> at the bottom of the page you'll see "HTTP Proxy" boxes (located below the "renew lease" button) ---------------> change the proxy to AUTO. Note: if you're already at AUTO, change it to "Manual" and make your Port = 80.

Lync 2013 Error 31055 ,31059 LS Call Park Service, The database being used by Group Pickup is not the appropriate version and There was a problem communicating with the Group Pickup backend database.

Hello
I have Lync 2013 and 2010 , still i didn't finish my migration completely from 2010 to 2013 .this is coexistence environment that contains both Lync Server 2010 and Lync Server 2013 .
There was no error's in my lync 2013 front end and back end server's and every thing was fine, yesterday I installed windows updated AND CU for my lync 2013 front end and backend server's .
later on after restarting both the front end and the back end server's i start having hundred's of these error's related to "LS Call Park Service".
so any advice for these issue ? and what is the effect for these error .
below is the error I got .
The database being used by Group Pickup is not the appropriate version.
The database is not the correct version:
Connection: Data Source=HQ-LYNC2013-BE.aaaaaaaaaaaaaaaaaaaaaaaaaaa\rtc;Initial Catalog=cpsdyn;Integrated Security=True
Expected... SchemaVersion: 1, SprocVersion: 1, UpgradeVersion: 2
Actual... SchemaVersion: 0, SprocVersion: 0, UpgradeVersion: 0
Cause: The database has not been upgraded.
Resolution:
Upgrade the database to CU1.
==============================================================
There was a problem communicating with the Group Pickup backend database.
There were problems accessing SQL server:
Connection: Data Source=HQ-LYNC2013-BE.aaaaaaaaaaaaaaaaaaaaaaaaaa\rtc;Initial Catalog=cpsdyn;Integrated Security=True
Message: The EXECUTE permission was denied on the object 'DbpGetVersionSchema', database 'cpsdyn', schema 'dbo'.
Error code: -2146232060
Error number: 229
Cause: This may be caused by connectivity issues with the backend database.
Resolution:
Check if SQL backend is running and accepts connections from Group Pickup.
=============================================================================
Kind Regards
MK

Hello
thanks Holger for u r replay .
due to the Microsoft article about the cu :
I run only :
Install-CsDatabase -ConfiguredDatabases -SqlServerFqdn FEBE.FQDN -Verbose
Note In a coexistence environment that contains both Lync Server 2010 and Lync Server 2013 and in which the Central Management Service is located on a Lync Server 2010 pool, do not run the
Install-CsDatabase -CentralManagementDatabase command. If you later move the Central Management Service to a Lync Server 2013 pool, you have to run the
Install-CsDatabase -CentralManagementDatabase command to apply the changes.
here is what I get on my power shell after i run the command : "WARNING: Warning: Failed to execute batch --"
PS C:\Users\MK> Install-CsDatabase -ConfiguredDatabases -SqlServerFqdn HQ-LYNC2013-BE.MyDomain -Verbose
VERBOSE: Creating new log file
"C:\Users\MK\AppData\Local\Temp\2\Install-CsDatabase-82d6613c-f2e3-47e6-8fc4-8f75d2efe6e4.xml".
VERBOSE: Install databases required by Lync Server role(s).
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.BlobStore'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database rtcxds.
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.AbsDatabase'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database rtcab.
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.RgsConfigDatabase'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database rgsconfig.
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.RgsDynDatabase'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database rgsdyn.
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.CpsDynDatabase'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database cpsdyn.
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.ArchivingDatabase'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\arc. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database LcsLog.
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.MonitoringDatabase'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\mon. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database LcsCDR.
VERBOSE: Assigning "BackendStore:BlobStore:LogPath" to F:\CsData
VERBOSE: Assigning "BackendStore:RtcSharedDatabase:LogPath" to F:\CsData
VERBOSE: Assigning "ArchivingStore:ArchivingDatabase:LogPath" to F:\CsData
VERBOSE: Assigning "MonitoringStore:MonitoringDatabase:LogPath" to F:\CsData
VERBOSE: Assigning "MonitoringStore:QoEMetricsDatabase:LogPath" to F:\CsData
VERBOSE: Assigning "ArchivingStore:ArchivingDatabase:DbPath" to F:\CsData
VERBOSE: Assigning "MonitoringStore:MonitoringDatabase:DbPath" to F:\CsData
VERBOSE: Assigning "MonitoringStore:QoEMetricsDatabase:DbPath" to F:\CsData
VERBOSE: Assigning "ABSStore:AbsDatabase:LogPath" to F:\CsData
VERBOSE: Assigning "ApplicationStore:RgsConfigDatabase:LogPath" to F:\CsData
VERBOSE: Assigning "ApplicationStore:RgsDynDatabase:LogPath" to F:\CsData
VERBOSE: Assigning "ApplicationStore:CpsDynDatabase:LogPath" to F:\CsData
VERBOSE: Assigning "BackendStore:BlobStore:DbPath" to F:\CsData
VERBOSE: Assigning "BackendStore:RtcSharedDatabase:DbPath" to F:\CsData
VERBOSE: Assigning "ABSStore:AbsDatabase:DbPath" to F:\CsData
VERBOSE: Assigning "ApplicationStore:RgsConfigDatabase:DbPath" to F:\CsData
VERBOSE: Assigning "ApplicationStore:RgsDynDatabase:DbPath" to F:\CsData
VERBOSE: Assigning "ApplicationStore:CpsDynDatabase:DbPath" to F:\CsData
VERBOSE: Installing "BackendStore" on HQ-LYNC2013-BE.MyDomain\rtc, collocated: False
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.BlobStore'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database rtcxds.
Checking state for database rtcxds.
State of database rtcxds is DbState_RequiresMinorUpgrade.
Database rtcxds set to mode Restricted.
Dropping all procedures, functions and views from database rtcxds.
Executing RtcDb.sql...
Adding master role...
Setting owner for database rtcxds to sa.
Creating login MyDomain\RTCHSUniversalServices.
Creating user MyDomain\RTCHSUniversalServices.
Creating Schema MyDomain\RTCHSUniversalServices.
Creating login MyDomain\RTCUniversalReadOnlyAdmins.
Creating user MyDomain\RTCUniversalReadOnlyAdmins.
Creating Schema MyDomain\RTCUniversalReadOnlyAdmins.
Creating login MyDomain\RTCUniversalServerAdmins.
Creating user MyDomain\RTCUniversalServerAdmins.
Creating Schema MyDomain\RTCUniversalServerAdmins.
Adding account MyDomain\RTCHSUniversalServices to role ConsumerRole.
Adding account MyDomain\RTCUniversalReadOnlyAdmins to role ConsumerRole.
Adding account MyDomain\RTCHSUniversalServices to role ReplicatorRole.
Adding account MyDomain\RTCHSUniversalServices to role PublisherRole.
Adding account MyDomain\RTCUniversalServerAdmins to role PublisherRole.
Setting database version: Schema Version 15, Sproc Version 13, Update Version 2.
Setting the database rtcxds to multi user mode.
Database rtcxds is set to multi user mode.
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.RtcSharedDatabase'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database rtcshared.
Database created by script "RtcSharedDatabase" already exists and is current.
VERBOSE: Successfully installed the database. For details, see the following log:
"C:\Users\MK\AppData\Local\Temp\2\Create-BackendStore-HQ-LYNC2013-BE.MyDomain_rtc-[2014_11_13][14_35_01].log"
VERBOSE: Installing "ABSStore" on HQ-LYNC2013-BE.MyDomain\rtc, collocated: False
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.AbsDatabase'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database rtcab.
Checking state for database rtcab.
State of database rtcab is DbState_RequiresMinorUpgrade.
Database rtcab set to mode Restricted.
Dropping all procedures, functions and views from database rtcab.
Executing RtcAbTypes.sql...
WARNING: Warning: Failed to execute batch --
-- Copyright (c) Microsoft Corporation. All rights reserved.
exec sp_addrole N'ServerRole'.
Executing RtcAbDb.sql...
Setting owner for database rtcab to sa.
Creating login MyDomain\RTCComponentUniversalServices.
Creating user MyDomain\RTCComponentUniversalServices.
Creating Schema MyDomain\RTCComponentUniversalServices.
Adding account MyDomain\RTCComponentUniversalServices to role ServerRole.
Setting database version: Schema Version 62, Sproc Version 42, Update Version 3.
Setting the database rtcab to multi user mode.
Database rtcab is set to multi user mode.
VERBOSE: Successfully installed the database. For details, see the following log:
"C:\Users\MK\AppData\Local\Temp\2\Create-ABSStore-HQ-LYNC2013-BE.MyDomain_rtc-[2014_11_13][14_35_20].log"
VERBOSE: Installing "ApplicationStore" on HQ-LYNC2013-BE.MyDomain\rtc, collocated: False
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.RgsConfigDatabase'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database rgsconfig.
Database created by script "RgsConfigDatabase" already exists and is current.
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.RgsDynDatabase'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database rgsdyn.
Database created by script "RgsDynDatabase" already exists and is current.
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.CpsDynDatabase'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database cpsdyn.
Checking state for database cpsdyn.
State of database cpsdyn is DbState_RequiresMinorUpgrade.
Database cpsdyn set to mode Restricted.
Dropping all procedures, functions and views from database cpsdyn.
Executing CpsDyn.sql...
Setting owner for database cpsdyn to sa.
Creating login MyDomain\RTCComponentUniversalServices.
Creating user MyDomain\RTCComponentUniversalServices.
Creating Schema MyDomain\RTCComponentUniversalServices.
Creating login MyDomain\RTCUniversalReadOnlyAdmins.
Creating user MyDomain\RTCUniversalReadOnlyAdmins.
Creating Schema MyDomain\RTCUniversalReadOnlyAdmins.
Creating login MyDomain\RTCUniversalServerAdmins.
Creating user MyDomain\RTCUniversalServerAdmins.
Creating Schema MyDomain\RTCUniversalServerAdmins.
Adding account MyDomain\RTCComponentUniversalServices to role ReadWriteRole.
Adding account MyDomain\RTCUniversalServerAdmins to role ReadWriteRole.
Adding account MyDomain\RTCUniversalReadOnlyAdmins to role ReadOnlyRole.
Setting database version: Schema Version 1, Sproc Version 1, Update Version 2.
Setting the database cpsdyn to multi user mode.
Database cpsdyn is set to multi user mode.
VERBOSE: Successfully installed the database. For details, see the following log:
"C:\Users\MK\AppData\Local\Temp\2\Create-ApplicationStore-HQ-LYNC2013-BE.MyDomain_rtc-[2014_11_13][14_35_37].log"
VERBOSE: Installing "ArchivingStore" on HQ-LYNC2013-BE.MyDomain\arc, collocated: False
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.ArchivingDatabase'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\arc. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database LcsLog.
Database created by script "ArchivingDatabase" already exists and is current.
VERBOSE: Successfully installed the database. For details, see the following log:
"C:\Users\MK\AppData\Local\Temp\2\Create-ArchivingStore-HQ-LYNC2013-BE.MyDomain_arc-[2014_11_13][14_35_51].log"
VERBOSE: Installing "MonitoringStore" on HQ-LYNC2013-BE.MyDomain\mon, collocated: False
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.MonitoringDatabase'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\mon. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database LcsCDR.
Checking state for database LcsCDR.
Checking state for database LcsCDR.
State of database LcsCDR is DbState_RequiresMinorUpgrade.
WARNING: The database LcsCDR being updated has data file path at
\\HQ-LYNC2013-BE.MyDomain\C$\CsData\MonitoringStore\mon\DbPath\LcsCDR.mdf and supplied data file path is
\\HQ-LYNC2013-BE.MyDomain\F$\CsData\MonitoringStore\mon\DbPath\LcsCDR.mdf. Supplied path will be ignored.
WARNING: The database LcsCDR being updated has log file path at
\\HQ-LYNC2013-BE.MyDomain\C$\CsData\MonitoringStore\mon\LogPath\LcsCDR.ldf and supplied data file path is
\\HQ-LYNC2013-BE.MyDomain\F$\CsData\MonitoringStore\mon\LogPath\LcsCDR.ldf. Supplied path will be ignored.
Database LcsCDR set to mode Restricted.
Dropping all procedures, functions and views from database LcsCDR.
Executing CdrDb.sql...
Setting owner for database LcsCDR to sa.
Creating login MyDomain\CSAdministrator.
Creating user MyDomain\CSAdministrator.
Creating Schema MyDomain\CSAdministrator.
Creating login MyDomain\RTCComponentUniversalServices.
Creating user MyDomain\RTCComponentUniversalServices.
Creating Schema MyDomain\RTCComponentUniversalServices.
Adding account MyDomain\RTCComponentUniversalServices to role ServerRole.
Adding account MyDomain\RTCComponentUniversalServices to role ReportsReadOnlyRole.
Adding account MyDomain\CSAdministrator to role ReportsReadOnlyRole.
Setting database version: Schema Version 39, Sproc Version 82, Update Version 2.
Setting the database LcsCDR to multi user mode.
Database LcsCDR is set to multi user mode.
SQL Server Agent is running and its start mode was detected as Auto.
Executing CdrJobs.sql...
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.QoEMetricsDatabase'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\mon. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database QoEMetrics.
Checking state for database QoEMetrics.
Checking state for database QoEMetrics.
State of database QoEMetrics is DbState_RequiresMinorUpgrade.
WARNING: The database QoEMetrics being updated has data file path at
\\HQ-LYNC2013-BE.MyDomain\C$\CsData\MonitoringStore\mon\DbPath\QoEMetrics.mdf and supplied data file path is
\\HQ-LYNC2013-BE.MyDomain\F$\CsData\MonitoringStore\mon\DbPath\QoEMetrics.mdf. Supplied path will be ignored.
WARNING: The database QoEMetrics being updated has log file path at
\\HQ-LYNC2013-BE.MyDomain\C$\CsData\MonitoringStore\mon\LogPath\QoEMetrics.ldf and supplied data file path is
\\HQ-LYNC2013-BE.MyDomain\F$\CsData\MonitoringStore\mon\LogPath\QoEMetrics.ldf. Supplied path will be ignored.
Database QoEMetrics set to mode Restricted.
Dropping all procedures, functions and views from database QoEMetrics.
Executing QoEDb.sql...
Setting owner for database QoEMetrics to sa.
Creating login MyDomain\RTCComponentUniversalServices.
Creating user MyDomain\RTCComponentUniversalServices.
Creating Schema MyDomain\RTCComponentUniversalServices.
Adding account MyDomain\RTCComponentUniversalServices to role ServerRole.
Setting database version: Schema Version 62, Sproc Version 90, Update Version 1.
Setting the database QoEMetrics to multi user mode.
Database QoEMetrics is set to multi user mode.
SQL Server Agent is running and its start mode was detected as Auto.
Executing QoEJobs.sql...
VERBOSE: Successfully installed the database. For details, see the following log:
"C:\Users\MK\AppData\Local\Temp\2\Create-MonitoringStore-HQ-LYNC2013-BE.MyDomain_mon-[2014_11_13][14_35_51].log"
VERBOSE: No changes were made to the Central Management Store.
VERBOSE: Creating new log file
"C:\Users\MK\AppData\Local\Temp\2\Install-CsDatabase-82d6613c-f2e3-47e6-8fc4-8f75d2efe6e4.html".
WARNING: "Install-CsDatabase" processing has completed with warnings. "5" warnings were recorded during this run.
WARNING: Detailed results can be found at
"C:\Users\MK\AppData\Local\Temp\2\Install-CsDatabase-82d6613c-f2e3-47e6-8fc4-8f75d2efe6e4.html".
PS C:\Users\MK>
I hope some one can confirm no issue with what I did ??
Kind Regards
MK

"There was a problem communicating with the Apple Online Store. Please try again."

When I try to order prints on my Macbook I get the error .... "There was a problem communicating with the Apple Online Store. Please try again." I've gotten this error for a few days. When I try the same thing with my wife's Macbook Pro there are no issues. How do I fix the problem on m Macbook?

I found the problem thanks to some help given.
Go to iPhoto menu -> Preferences... -> Advanced -> > Print Products Store was set to "none". I changed that to my own country and then it worked, I could place the order.
Thanks a lot!

Print error - there was a problem connecting to the server - spinning beach ball

This has happened pre-yosemite and since. It used to only happen at home but now also happens at work. Every time I try to print, I get a spinning beach ball and a long delay until I get an error message saying there was a problem connecting to the server. At home, after clicking OK, I get a second spinning beach ball session with same error. Once I click OK second time, I get print window and can print. At work, it's only one session of spinning beach ball. The office problem occurred after upgrading to yosemite. I've deleted and added the printers without resolution. I've repaired permissions. The home problem has been going on for at least a year, probably a couple. Using a macbook pro.

There are many possible causes for this issue, and it may be very hard to resolve without wiping your account clean of everything except documents as a last resort. Please take each of the following steps that you haven't already tried. Back up all data before making any changes.
If you get the alert in the login screen before you log in, stop here and ask for instructions.
Step 1
If you get the alert as soon as you log in, it's probably caused by one of your login items or by software that otherwise loads at startup or login. Ask if you need help identifying it. Known offenders are "1Password" and "Adobe Resource Synchronizer."
Step 2
If there's an icon representing the server in the sidebar of a Finder window, hold down the command key and drag it out.
Step 3
In the Finder, press the key combination command-K or select
          Go ▹ Go to Server...
from the menu bar. In the upper right corner of the window that opens is a Recent Servers popup menu represented by a clock icon. From that menu, select
          Clear Recent Servers…
and confirm. Test.
Step 4
Open the Printers & Scanners pane in System Preferences and delete any network devices you no longer use. If in doubt, delete them all and add back the ones you want.
Step 5
Triple-click anywhere in the line below on this page to select it, then copy the text to the Clipboard by pressing command-C:
~/Library/PDF Services
In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return. A folder may open. If it does, move the contents to the Desktop, or to a new folder on the Desktop. Log out and log back in. Test. If there's no change, put the items you moved back where they were and continue.
Step 6
Open the folder
~/Library/Preferences
as in Step 5 and move the file named "loginwindow.plist" items in that folder to the Trash, if it exists (it may not.)
Log out and back in again, and test.
Step 7
Other possible causes are references in the iPhoto, iTunes, or iMovie library pointing to the server, bookmarks in the Preview application, and PDF files created by Adobe Acrobat with embedded scripts.
Try rebuilding the iPhoto library, if applicable.
Step 8
Resources such as images or sounds stored on the server may have been added to various applications. Examples would be pictures added to Contacts and custom sounds added to Mail. The range of possibilites here is practically infinite, so I can't be more specific. You might get a hint by launching the Console application and looking for error messages that appear at the same time as the alerts.
Step 9
Disconnect all wired peripherals except those needed to start up. Start up in safe mode. Test. After testing, restart as usual (not in safe mode) and verify that you still have the problem.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Step 10
Triple-click the line below to select it:
/System/Library/CoreServices/Directory Utility.app
Rght-click or control-click the highlighted text and select
          Services ▹ Open
from the contextual menu.* The application Directory Utility will open.
In the Directory Utility window, select the Directory Editor tool in the toolbar. Select Mounts from the Viewing menu in the toolbar, and/Local/Default from the node menu, if not already selected. On the right is a list of names and values. By default, the list is empty. If it's not empty, post a screenshot of the window and stop here.
*If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). Open a TextEdit window and paste into it (command-V). Select the line you just pasted and continue as above.
Step 11
Open the following file as you did in the last step:
/etc/auto_master
It will open in a TextEdit window. The contents should be exactly this:
# Automounter master map
+auto_master          # Use directory service
/net               -hosts          -nobrowse,hidefromfinder,nosuid
/home               auto_home     -nobrowse,hidefromfinder
/Network/Servers     -fstab
/-               -static
If there are any other lines in the window, post them. Otherwise, close the window.

After loading lion, I get an error message "There was a problem connecting with the server. URL's with the type "file" are not supported."

After loading Lion, I have been getting an error message "There was a problem connecting to the server. URLs with the type "file:" are not supported." There does not seem to be any actual problem with internet connectivity, but it is persistent and annoying. Any idea of its cause and treatment?

Take a look at this link, https://discussions.apple.com/message/16156214#16156214

Installed OSX 10.9.5 Error: "There was a problem connecting to the server "SERVER"" When connecting to Windows Server

Installed OSX 10.9.5 on three MacBookPRO's now all of them have lost access to our Windows 2003 Server. I get the message "There was a problem connecting to the server "SERVER". Note this was previously connecting with 10.9.4.
I understand 10.9.5 was giving us improvements in the reliability of SMB2 but this is now much worse.
Help!

Installed OSX 10.9.5 on three MacBookPRO's now all of them have lost access to our Windows 2003 Server. I get the message "There was a problem connecting to the server "SERVER". Note this was previously connecting with 10.9.4.
I understand 10.9.5 was giving us improvements in the reliability of SMB2 but this is now much worse.
Help!

There was a problem connecting to the server message - displayed when pressing printer email address

HP Photosmart B210, Windows 7...was able to print from iphone yesterday but now will not print. One the face of the printer if the ePrint symbol is pressed for the printer address the message "there was a problem connecting to the server" appears. I can find the device with my phone and on my computer. I can print from the computer but not phone

I understand you are getting unable to connect to server error message on your printer. I would first unplug router and printer for about 1 minute. I would plug router up first then printer. I would then try to enable web services. If not successful and you get same error message. I would follow these steps.
1. Obtain your printer's IP address
a. This can be done by pressing the wireless icon on printer.
2. Enter the printer's IP address in a browser.
3. Select the network tab at the top of the page.
4. On the left select networking.
5. Select Network Address (IP)
6. Select Manual DNS Server
a. Manual Preferred DNS should read 8.8.8.8
b. Alternate DNS Server should read. 8.8.4.4
7. Select apply you might get a warning just select okay.

I keep getting an error "There was a problem connecting to the server" ....and an ip address is listed

Every time I print to a pdf I get an error message that there was a problem connecting to a server. I am running a mac with windows parallels and the error happens in parallels. It seems that somehow the PDF software has captioned a deleted IP address and keeps pointing to this and as this IP address does not exist it produces the error. Can someone help me as I need to find where PDF stores this information and delete it..as it is driving me crazy as the error is continuous. Thank you

Look in the System Preferences -> Accounts. Click on the Login Items tab. I bet there is an entry for your drive. Use the "-" to delete it.

There was an issue connecting with the server. Please try again later. 122

Hello,
I started to work in a new company where the former employee used a trial version. Now I bought a license and opened the Dreamweaver for the first time in my whole life. I tried to import a business catalyst site but there seems to be a problem with the server as it keeps saying what's mentioned above. Is there anything I could do besides trying again later? I am new with Dreamweaver and no expert in servers

Open a new tab in your browser.
Go to http://www.businesscatalyst.com/admin/Index.aspx
Check if you are able to login using the registered email id and password.
Make sure the email id from which you are logging into DW CC is same for Business Catalyst.
Also read the document below for more clarification.
http://helpx.adobe.com/dreamweaver/using/dreamweaver-business-catalyst.html

There was a problem connecting to the server error

HELP!
Right, so I upgraded to Lion on my MacBook Pro last night, and have spasmodically gotten the following error:
There was a problem connecting to the server "me409fs02"
followed by:
There was a problem connecting to server "me35syd08"
Now the weird thing is, me409fs02 and me35syd08 were servers at a company I used to work for 2 years ago. I have no idea why my computer is suddenly trying to log in to these old servers, or how to make it stop.
Here's a screen shot of what's going on in the console at the exact moment that the errors occur:
This is turning out to be a gargantuan pain in the butt and I'd really appreciate any help I can get.
Thanks in advance,
Brent.

G'day mate,
Is this only happening in one user account? If so, then you should look into the library folder of your user account and your login items (through "Users & Groups Preferences").
Check for any LaunchAgents or LaunchDaemons that could be attempting to connect to the server.
If it's happening for every user, then also check the Library folder at the root of your hard drive (LaunchAgents, LaunchDaemons and StartupItems).
Cheers,
Rodney

That sends me this error: There was an error communicating with the server, try later when I want to create a new Keynote presentation?

Similar Messages

Maybe you are looking for