The Accessibility Object for AS2 is returning a false positive for AS2 with IE10 on Windows 8 Pro.

There is an issue with the our legacy content player, which is written in Flash Actionscript 1 & 2. This
player behaves fine in most browsers on most platforms, but in IE10 on Windows 8 it doesn't work
properly.
Internet Explorer 110
Version: 10.0.9200.16688
Update Version: 10.0.9 (KB2870699)
Windows 8 Pro
This seems to because of the Flash engine's Accessibility object using the Microsoft Active
Accessibility (MSAA) API to detect the presence of Screen Readers. This detection is creating a false
positive on Windows 8 machines and that may be due to the touch screen support on that platform. This
doesn't appear to be occuring with Chrome or Firefox on the same platform; however. So I suspect that
IE or IE's Flash compenent is doing something different than these other browsers.

This is legacy code and is too close to its end-of-life to justify porting to AS3. As far as a work-around I am already looking into it. I was hoping that someone had already encountered this issue and created a work-around. This would have saved time.
Any other takers?

Similar Messages

False positive for Windows RPC DCOM Overflow id=3327 version=S188

Hi,
Could you take a look at the below capture to see if there is false positive at work.
Thanks,
Matt
signature: description=Windows RPC DCOM Overflow id=3327 version=S188
subsigId: 6
sigDetails: \\\x3c400 chars>\
interfaceGroup:
vlan: 0
participants:
attacker:
addr: locality=INTERNAL <address removed>
port: 1914
target:
addr: locality=INTERNAL <address removed>
port: 445
context:
fromTarget:
000000 63 00 5F 00 66 00 73 00 2E 00 6E 00 6F 00 72 00 c._.f.s...n.o.r.
000010 74 00 68 00 62 00 61 00 79 00 62 00 61 00 6E 00 t.h.b.a.y.b.a.n.
000020 63 00 6F 00 72 00 70 00 2E 00 63 00 6F 00 6D 00 c.o.r.p...c.o.m.
000030 00 00 00 00 57 00 69 00 6E 00 64 00 6F 00 77 00 ....W.i.n.d.o.w.
000040 73 00 20 00 35 00 2E 00 30 00 00 00 57 00 69 00 s. .5...0...W.i.
000050 6E 00 64 00 6F 00 77 00 73 00 20 00 32 00 30 00 n.d.o.w.s. .2.0.
000060 30 00 30 00 20 00 4C 00 41 00 4E 00 20 00 4D 00 0.0. .L.A.N. .M.
000070 61 00 6E 00 61 00 67 00 65 00 72 00 00 00 00 00 a.n.a.g.e.r.....
000080 00 7E FF 53 4D 42 73 00 00 00 00 98 07 C8 00 00 .~.SMBs.........
000090 00 00 00 00 00 00 00 00 00 00 00 00 FF FE 00 48 ...............H
0000A0 C0 3E 04 FF 00 7E 00 00 00 09 00 53 00 A1 07 30 .>...~.....S...0
0000B0 05 A0 03 0A 01 00 57 00 69 00 6E 00 64 00 6F 00 ......W.i.n.d.o.
0000C0 77 00 73 00 20 00 35 00 2E 00 30 00 00 00 57 00 w.s. .5...0...W.
0000D0 69 00 6E 00 64 00 6F 00 77 00 73 00 20 00 32 00 i.n.d.o.w.s. .2.
0000E0 30 00 30 00 30 00 20 00 4C 00 41 00 4E 00 20 00 0.0.0. .L.A.N. .
0000F0 4D 00 61 00 6E 00 61 00 67 00 65 00 72 00 00 00 M.a.n.a.g.e.r...
fromAttacker:
000000 00 04 41 32 00 01 00 00 00 00 00 71 00 00 00 00 ..A2.......q....
000010 00 D4 00 00 80 B9 00 A1 6F 30 6D A2 6B 04 69 4E ........o0m.k.iN
000020 54 4C 4D 53 53 50 00 03 00 00 00 01 00 01 00 58 TLMSSP.........X
000030 00 00 00 00 00 00 00 59 00 00 00 00 00 00 00 48 .......Y.......H
000040 00 00 00 00 00 00 00 48 00 00 00 10 00 10 00 48 .......H.......H
000050 00 00 00 10 00 10 00 59 00 00 00 15 8A 88 E2 05 .......Y........
000060 00 93 08 00 00 00 0F 47 00 57 00 2D 00 30 00 30 .......G.W.-.0.0
000070 00 32 00 38 00 37 00 00 46 5A 5E 7D 09 B9 25 FB .2.8.7..FZ^}..%.
000080 EF 1F 07 DE BD 60 85 13 57 00 69 00 6E 00 64 00 .....`..W.i.n.d.
000090 6F 00 77 00 73 00 20 00 32 00 30 00 30 00 30 00 o.w.s. .2.0.0.0.
0000A0 20 00 32 00 31 00 39 00 35 00 00 00 57 00 69 00 .2.1.9.5...W.i.
0000B0 6E 00 64 00 6F 00 77 00 73 00 20 00 32 00 30 00 n.d.o.w.s. .2.0.
0000C0 30 00 30 00 20 00 35 00 2E 00 30 00 00 00 00 00 0.0. .5...0.....
0000D0 00 00 00 58 FF 53 4D 42 75 00 00 00 00 18 07 C8 ...X.SMBu.......
0000E0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 FF FE ................
0000F0 00 48 00 3F 04 FF 00 58 00 08 00 01 00 2D 00 00 .H.?...X.....-..

This is indeed a false positive. You can either filter out trusted hosts or create a metasignature using this signature as a component to reduce the chance of false positives.
Tune signature 3327-6 and remove the produce alert action.
Create a custom signature as follows:
Engine Meta
Component list:
3327-6
3328-0
Meta-reset-interval = 2
Severity high
Summarize
Met-key = Axxx 1 unique victim
Component-list-in order = false
Event action: produce alert
This signature will only fire when signatures 3327-6 and 3328-0 fire. Since 3327-6 would have no event action of its own you would not see alerts from it.
Note that this signature does not have as high fidelity as the original 3327-6, that being said signature 3327-0 detects almost all public exploits for this vulnerability. We will note this in the NSDB.

False Positives for id=12713 version=S149

Just started receiving numerous firings of 12713. Looks like false positives. Is anyone else observing this?
Cisco MARS is creating the following : System Rule: DoS: Network - Success Likely
thanks
John Stark

This is indeed a false positive. You can either filter out trusted hosts or create a metasignature using this signature as a component to reduce the chance of false positives.
Tune signature 3327-6 and remove the produce alert action.
Create a custom signature as follows:
Engine Meta
Component list:
3327-6
3328-0
Meta-reset-interval = 2
Severity high
Summarize
Met-key = Axxx 1 unique victim
Component-list-in order = false
Event action: produce alert
This signature will only fire when signatures 3327-6 and 3328-0 fire. Since 3327-6 would have no event action of its own you would not see alerts from it.
Note that this signature does not have as high fidelity as the original 3327-6, that being said signature 3327-0 detects almost all public exploits for this vulnerability. We will note this in the NSDB.

False positive for GNU Bash Remote Code Execution Vulnerability

Dear Team,
in my customer, one of banking in brunei want to access several finance website such as www.iifm.net etc. Tipping point IPS blokec to access the website with report as a 16800: TCP: GNU Bash Remote Code Execution Vulnerability ( Low Severity). The site is normal and legal website. Our question is the several website is needed to access by our employee due to the dailiy working. Please advice
Best Regards
Yudi

Hello Yuibagan,
This is the Consumer products forum.
You need to be in the HP Enterprise Business Community for IT related issues for servers, etc.
I think you will want to post this question in the Security section. Dont post the same question more than once as you did here.
HP Networking
You will also want to take a look at the Articles and updates explaining GNU Bash here:
GNU Bash vulnerability "Shellshock" (CVE-2014-6271... - HP Enterprise Business Community
HP Security Research: GNU Bash vulnerability "Shel... - HP Enterprise Business Community
HP AppDefender and HP WebInspect updates: GNU Bash... - HP Enterprise Business Community
HPSR Software Security Content 2014 Update 3 - HP Enterprise Business Community
Good luck

False positive for 16800: TCP: GNU Bash Remote Code Execution Vulnerability

Dear Team,
in my customer, one of banking in brunei want to access several finance website such as www.iifm.net etc. Tipping point IPS blokec to access the website with report as a 16800: TCP: GNU Bash Remote Code Execution Vulnerability ( Low Severity). The site is normal and legal website. Our question is the several website is needed to access by our employee due to the dailiy working. Please advice
Best Regards
Yudi

@yuibagan
‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP

What is the use of an access object in a BOL hierarchy ????

Hi All,
I want to know what is the use of an access object in BOL hierarchy .... if we can use a search object to search for entities ... then in what scenario will an access object be used ?
Regards,
Ashish

Hi Dominik,
Thanks for the repy !!!!
Now, as you said we can access a (deep) node of the whole model using an access object.
Let us consider the component set ONEORDER. As seen we can use the following path to reach BTDocFlowAll using search object :-
BTQuery1O -> BTOrder -> BTOrderHeader -> BTHeaderDocFlowSet -> BTDocFlowSet -> BTDocFlowAll ....
Also, to reach BTDocFlowAll we can even use the access object as follows :-
BTAdminI -> BTItemDocFlowSet -> BTDocFlowAll....
Now my question is :-
Normally we use the class cl_crm_bol_query_service to fire a search based on a search object. Can we use the same class to fire a search based on access object ?
(actually I currently dont have a CRM system so I could not try it out myself).
If not, then how do we fire a query using an access object ?
Regards,
Ashish

How can I get the Doc object from any other object?

Dear colleagues,
in FrameScript it is dead-simple to get to the document part of any object, just add .Doc to the variable.
How can I achieve the same with ExtendScript? I amtired of passing the document object next to AFrames or Pgfs along into subroutines, because those objects already contain the information about their document. But how do I access this?
Thanks for pointers,
- Michael
PS: Almost the same is true for the page an object lives on. With FrameScript we use .Page, with ExtendScript you have to move up the object tree until you reach the UnanchoredFrame.PageFramePage…
PPS: It would be great to see some convenience properties like .Doc and .Page implemented natively.

I'll preface this response by admitting this far from an elegant solution, but I did write a function addressing this question, mostly as an exercise.
If passed an object with an InTextFrame property (Pgf, AFrame, Cell, Fn) that resides in an open document, the function will return the Doc object. Otherwise, it returns undefined.
function getParentDoc(testObj) {
    //Get object for current page
    try { var curPage = testObj.InTextFrame.FrameParent.PageFramePage; }
    catch(er) {return;}
    //Step backwards to first page in document
    var prevPage = curPage.PagePrev;
    while (prevPage.ObjectValid())
        curPage = prevPage;
        prevPage = prevPage.PagePrev;
    //Compare with first pages of open documents
    var testDoc = app.FirstOpenDoc;
    while (testDoc.ObjectValid())
        if (curPage.id==testDoc.FirstBodyPageInDoc.id) return testDoc;
        testDoc = testDoc.NextOpenDocInSession;
    return;
To your PPS: Rather than seeing the native framework grow bloated to address additional features, I would love to see Adobe and other developers publish libraries of useful functions and class extensions.

How can I get the underlying object from the ObjectReference

Dear friends,
I think this question has been asked a couple of times. But, I am still wondering if anybody has found an answer to it. Maybe this is some common need ...
I would like to get the underlying object for which the ObjectReference is
a mirror For example, I have a class Customer in my application, and I can get an ObjectReference through JDI during runtime. But how can I get the target VM's object which is a real instance of Customer, by which I can invoke methods defined in Customer?
Thank you so much for any input!
SunnyDay

I'll preface this response by admitting this far from an elegant solution, but I did write a function addressing this question, mostly as an exercise.
If passed an object with an InTextFrame property (Pgf, AFrame, Cell, Fn) that resides in an open document, the function will return the Doc object. Otherwise, it returns undefined.
function getParentDoc(testObj) {
    //Get object for current page
    try { var curPage = testObj.InTextFrame.FrameParent.PageFramePage; }
    catch(er) {return;}
    //Step backwards to first page in document
    var prevPage = curPage.PagePrev;
    while (prevPage.ObjectValid())
        curPage = prevPage;
        prevPage = prevPage.PagePrev;
    //Compare with first pages of open documents
    var testDoc = app.FirstOpenDoc;
    while (testDoc.ObjectValid())
        if (curPage.id==testDoc.FirstBodyPageInDoc.id) return testDoc;
        testDoc = testDoc.NextOpenDocInSession;
    return;
To your PPS: Rather than seeing the native framework grow bloated to address additional features, I would love to see Adobe and other developers publish libraries of useful functions and class extensions.

How to track changes made to the standard objects by SAP during upgrade ?

Hi All,
Can any one of you please let me know if there is any straight forward method to find any change made to the standard objects by SAP in different versions ?
Like for eg, during upgrade from 4.6c to ECC 6.0.
Thanks in advance.

> For eg , if SAP has made any change in the standard transaction IE02, in ECC 6.0 how will we come to know those changes?
There are two sources for that:
The "Solution Browser" (http://solutionbrowser.erp.sap.fmpmedia.com/) which lists the differences between source and destination release and the release notes (http://service.sap.com/releasenotes). You'd need to read here all those from 4.6 to ERP 6.0 (so 4.7, ECC 5.0 and ERP 6.0) to find out the behaviour changes.
Markus

Business Object BUS1001 - Material this is the Business object.

Hi All,
I need to activate the notification for the below .
I got the solution,However we do not have any workflow consultant,Would look forward for the step by step procedure to achieve the requirement from you.
Try by activating the workflows for material master Change. -how?
Create Change pointers, Where can i get this? so that they trigger an event or notification when there is a price change more than 40 % in the Material master....
BUS1001 - Material this is the Business object?
I would need a detailed procedure for the above.

My step plan in your case would look like this:
Step 1: Hire workflow consultant.
Step 2: Give him the requirements
Step 3: Wait for result
Step 4: Test the workflow.
Or as an alternative you can search the forum because change documents have been discussed here many times.
Regards,
Martin

Can I undo "Erase mac" setting for Stolen, but returned devices??

Can I undo "Erase mac" setting for Stolen, but returned devices?? Laptop bag with MacBook Pro, iPad and Android Tablet were stolen at a tradeshow last week - so I found the ERASE setting thru iCloud - NOW the devices are all FOUND and being shipped back to me. (HORRAY!!) But, is there a way to UNDO the Erase setting that I clicked on?

Hello there, sunny_and72.
Great news on finding your lost devices! That has got to be a major relief. The following Knowledge Base article offers the possible ways of restoring your data onto your devices after an erase has been performed:
iCloud: Erase your device
If you erase then find your iOS device, you can restore the information on the device using iCloud Backup (if backup was turned on before you erased it) or iTunes. For more information, see iCloud storage and backup overview, or the Safety, Handling & Support section of the iOS 8 user guide for your iPhone, iPad, or iPod touch. If your device has iOS 7 or earlier, get the user guide from the Apple Support website.
If you erase then find your Mac, you can restore the information on the Mac using a Time Machine backup. For more information, see the Apple Support article Recover your entire system. If you set an EFI firmware password on your Mac before it was lost, then erase it and later find it, you may need to take your Mac to an authorized repair center to unlock it before you can use it again.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Can´t access my files on Creative Cloud. "Page temporarily unavailable. We will return soon." "We are working quickly to resolve the problem and apologize for the delay. Check back later or visit our website for status updates. In addition, you can get he

Hello,
For a few days I have been trying to access my files on Creative Cloud web without success. I´ve got this message only:
"Page temporarily unavailable. We will return soon."
"We are working quickly to resolve the problem and apologize for the delay.
Check back later or visit our website for status updates.
In addition, you can get help in the forums of the Creative Cloud.
Thank you for understanding!"
(I used Google Translate)
Somebody help?

You do not need ?&promoid=KRUVP at the end of the url but it should not matter.
One thing to check is if your hosts file is modified. Open the Command Prompt and type: notepad %systemroot%\system32\drivers\etc\hosts
This will open a read-only copy of your host file in Notepad. Are there any entries in this file regarding adobe.com?
The other thing you can do is open the Developer Tools in the Chrome browser. On Windows press Ctrl + Shift to open them. Switch to the Network tab. Reload the page by pressing Ctrl + r. Check for any 4xx or 5xx errors which should be colored red.
Post screenshots of your results or send me a private forum message with the information.

Regarding the access key for an object

HI all
Please clarify me the doubt that an access key will be different for each and every object or one for all the objects.
regs
karna

Hi karna,
1. It will be different for all objects.
2. In fact, access key will be different
    for each object,
   and that too, for each different installation number
   as well as each basis version number
<b>3. In short, access key is dependent upon the combination of
1. The object R3TR FUGR SFES
2. Sap Release (eg. 640)
3. Installation Number</b>
4. It means that the access key for one standard program
   (in our server),
   will not work in another server bcos the installation number will be different.
regards,
amit m.

How do I access objects from the original Thread?

I have this simple JApplet that just makes a circle bounce around the screen. Here it is:
import java.awt.Color;
import javax.swing.JApplet;
import java.awt.Graphics;
import java.awt.event.MouseListener;
import java.awt.event.MouseEvent;
public class TestApplet3 extends JApplet implements MouseListener {
    private int lastX;          // x coordinate of circle
    private int lastY;          // y coordinate of circle
    private int d = 15;          // diameter of circle
    public void paint(Graphics g) {
    public void init() {
        addMouseListener(this);
    public void mouseClicked(MouseEvent event) {
        Graphics gx = this.getGraphics();
        for (int x = 0, y = 0, count = 0, horiz = 2, vert = 2, k = 2; count < 1000; x = x + horiz, y = y + vert, count++) {
            if ((x + d) >= 350) {
                horiz = -horiz;
            if ((x <= 0) && (horiz < 0)) {
                horiz = -horiz;
            if ((y + d) >= 200) {
                vert = -vert;
            if ((y <= 0) && (vert < 0)) {
                vert = -vert;
            gx.setColor(Color.WHITE);
            gx.fillOval(lastX, lastY, d, d);
            gx.setColor(Color.RED);
            lastX = x;
            lastY = y;
            gx.fillOval(lastX, lastY, d, d);
            try {
                Thread.sleep(20);
            } catch (Exception ex) {
                System.out.println(ex.getMessage());
    public void mouseEntered(MouseEvent event) {
    public void mouseExited(MouseEvent event) {
    public void mousePressed(MouseEvent event) {
    public void mouseReleased(MouseEvent event) {
}But now I'd like to change it so that when the mouse is clicked a new Thread is spawned to run the code within the mouseClicked method..... this will allow multiple circles to bounce around and will also keep the applet responsive to new mouse clicks... so I've tried changing it below:
* To change this template, choose Tools | Templates
* and open the template in the editor.
package runninggraph;
* @author epuknol
import java.awt.Color;
import javax.swing.JApplet;
import java.awt.Graphics;
import java.awt.event.MouseListener;
import java.awt.event.MouseEvent;
public class TestApplet3 extends JApplet implements MouseListener, Runnable {
    private int lastX;          // x coordinate of circle
    private int lastY;          // y coordinate of circle
    private int d = 15;          // diameter of circle
    public void paint(Graphics g) {
    public void init() {
        addMouseListener(this);
    public void run() {
        Graphics gx = this.getGraphics();
        for (int x = 0, y = 0, count = 0, horiz = 2, vert = 2, k = 2; count < 1000; x = x + horiz, y = y + vert, count++) {
            if ((x + d) >= 350) {
                horiz = -horiz;
            if ((x <= 0) && (horiz < 0)) {
                horiz = -horiz;
            if ((y + d) >= 200) {
                vert = -vert;
            if ((y <= 0) && (vert < 0)) {
                vert = -vert;
            gx.setColor(Color.WHITE);
            gx.fillOval(lastX, lastY, d, d);
            gx.setColor(Color.RED);
            lastX = x;
            lastY = y;
            gx.fillOval(lastX, lastY, d, d);
            try {
                Thread.sleep(20);
            } catch (Exception ex) {
                System.out.println(ex.getMessage());
    public void mouseClicked(MouseEvent event) {
        (new Thread(new TestApplet())).start();
    public void mouseEntered(MouseEvent event) {
    public void mouseExited(MouseEvent event) {
    public void mousePressed(MouseEvent event) {
    public void mouseReleased(MouseEvent event) {
}but this doesn't work - I think because the this.getGraphics() doesn't refer back to the same object ..... I've tried some other things too - like defining the Graphics gx as a class variable and initializing it before spawning the new Thread ... but I can't access gx using that technique either.
Can somebody please help me get where I'm trying to go?
Thanks.

Aw heck, got bored. For instance, this draws a bunch of balls without a direct call to Thread anything:
BouncingCircles.java
import java.awt.Color;
import java.awt.Dimension;
import java.awt.Graphics;
import java.awt.Graphics2D;
import java.awt.Point;
import java.awt.RenderingHints;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import java.awt.event.MouseAdapter;
import java.awt.event.MouseEvent;
import java.util.ArrayList;
import java.util.List;
import javax.swing.JPanel;
import javax.swing.Timer;
* creates a JPanel that draws bouncing circles within it.
* @author Pete
public class BouncingCircles {
private static final int DELAY = 15;
private static final int DIAMETER = 15;
private static final int DELTA = 5;
List<Ball> ballList = new ArrayList<Ball>(); // list of all balls
private JPanel mainPanel = new JPanel() {
    @Override
    protected void paintComponent(Graphics g) {
      super.paintComponent(g);
      myPaint(g);
// Swing Timer that tells the balls to move and tells the JPanel to then draw them
private Timer sTimer = new Timer(DELAY, new ActionListener() {
    public void actionPerformed(ActionEvent e) {
      timerAction(e);
public BouncingCircles() {
    mainPanel.setPreferredSize(new Dimension(400, 400));
    mainPanel.addMouseListener(new MouseAdapter() {
      @Override
      // add new ball with each mouse press
      public void mousePressed(MouseEvent e) {
        ballList.add(new Ball(e.getPoint(), new Point(DELTA, DELTA)));
    sTimer.start();
public JPanel getPanel() {
    return mainPanel;
private void timerAction(ActionEvent e) {
    Dimension d = mainPanel.getSize();
    for (Ball ball : ballList) {
      if (ball.getPoint().x < 0) {
        ball.setXDirectionRight(true);
      } else if (ball.getPoint().x + DIAMETER > d.width) {
        ball.setXDirectionRight(false);
      if (ball.getPoint().y < 0) {
        ball.setYDirectionDown(true);
      } else if (ball.getPoint().y + DIAMETER > d.height) {
        ball.setYDirectionDown(false);
      ball.increment();
    mainPanel.repaint();
   * paintComponent method draws all balls in List
   * @param g
private void myPaint(Graphics g) {
    g.setColor(Color.red);
    Graphics2D g2d = (Graphics2D) g;
    RenderingHints rh = new RenderingHints(RenderingHints.KEY_ANTIALIASING,
        RenderingHints.VALUE_ANTIALIAS_ON);
    g2d.setRenderingHints(rh);
    for (Ball ball : ballList) {
      g.fillOval(ball.getPoint().x, ball.getPoint().y, DIAMETER, DIAMETER);
private class Ball {
    private Point point = new Point();
    private Point velocity = new Point();
    public Ball(Point point, Point velocity) {
      this.point = point;
      this.velocity = velocity;
    public Point getPoint() {
      return point;
    public Point getVelocity() {
      return velocity;
    public void increment() {
      point = new Point(point.x + velocity.x, point.y + velocity.y);
    public void setXDirectionRight(boolean right) {
      int newVelocityX = Math.abs(velocity.x);
      if (!right) {
        newVelocityX = -newVelocityX;
      velocity = new Point(newVelocityX, velocity.y);
    public void setYDirectionDown(boolean down) {
      int newVelocityY = Math.abs(velocity.y);
      if (!down) {
        newVelocityY = -newVelocityY;
      velocity = new Point(velocity.x, newVelocityY);
}And this displays the JPanel produced above in a standard JApplet.
BouncingCircApplet.java
import java.lang.reflect.InvocationTargetException;
import javax.swing.JApplet;
import javax.swing.SwingUtilities;
public class BouncingCircApplet extends JApplet {
@Override
public void init() {
    try {
      SwingUtilities.invokeAndWait(new Runnable() {
        public void run() {
          getContentPane().add(new BouncingCircles().getPanel());
    } catch (InterruptedException e) {
      e.printStackTrace();
    } catch (InvocationTargetException e) {
      e.printStackTrace();
}

How do I use multiple classes to access the same object?

This should be staightforward. I have and object and I have multiple GUIs which operate on the same object. Do all the classes creating the GUIs need to be inner classes of the data class? I hope this question makes sense.
Thanks,
Mike

public final class SingletonClass {
private static SingletonClass instance;
private int lastIndex = 10;
public final static SingletonClass getInstance()
if (instance == null) instance = new SingletoClass();
return instance;
public int getLastIndex() {
return lastIndex;
}1) This won't work since one could create a new SingletonClass. You need to add a private constructor. Also, because the constructor is private the class doesn't have to be final.
2) Your design isn't thread-safe. You need to synchronize the access to the shared variable instance.
public class SingletonClass {
    private static SingletonClass instance;
    private static Object mutex = new Object( );
    private int lastIndex = 10;
    private SingletonClass() { }
    public static SingletonClass getInstance() {
        synchronized (mutex) {
            if (instance == null) {
                instance = new SingletonClass();
        return instance;
    public int getLastIndex() {
        return lastIndex;
}if you are going to create an instance of SingletonClass anyway then I suggest you do it when the class is loaded. This way you don't need synchronization.
public class SingletonClass {
    private static SingletonClass instance=new SingletonClass();
    private int lastIndex = 10;
    private SingletonClass() { }
    public static SingletonClass getInstance() {
        return instance;
    public int getLastIndex() {
        return lastIndex;
}If you don't really need an object, then you could just make getLastIndex() and lastIndex static and not use the singleton pattern at all.
public class SingletonClass {
    private static int lastIndex = 10;
    private SingletonClass() { }
    public static int getLastIndex() {
        return lastIndex;
}- Marcus

The Accessibility Object for AS2 is returning a false positive for AS2 with IE10 on Windows 8 Pro.

Similar Messages

Maybe you are looking for