The API Library version must match the MDM Server version

hi friends,
The API Library version must match the MDM Server version
is it compulsory.
if so please let me know the compatible matching versions between them....

Hi Ram,
Yes the JAR file Version should be compatible with the version of MDM Server.
Supposedly you have MDM Version of SP05 the Jar files should also be of SP05 version , if you use JAR files of older version it wouldnt contain  new classes and methods of the newer APIs and would also contain some old classes which arent present in latest version.
Thanks
Namrata

Similar Messages

  • My iTunes library no longer matches the music on my iPhone.

    My iTunes library no longer matches the music on my iPhone.  How can I sync the music and playlists from my phone onto iTunes without iTunes completely wiping all the music on my iPhone? I'm also afraid I'll lose any newer music.

    Plug the device into your computer, open iTunes and sync it.
    Why would you be afraid you will lose your new music?
    Ideally you should be connecting your device to your computer to transfer purchases made on the device to the computer and the iTunes library on a regular basis.  Failure to do this puts you at risk of losing those purchases (and the money you spent on them) in the event your device fails, is lost, or stolen.

  • HT1451 itunes 11 is deleted and itunes 10.7 reinstalled but wont open because the itunes library .itl was created by a newer version ???

    how do i revert back to older version of itunes 10.7 because I hate 11.i have unistalled all apple and itunes related software but 10.7 wont open.I is held up because the itunes library .itl was created by a newer version how do i delete this without itunes 11 installed ? Windows 7 64bit.

    Thanks, just had the same problem. Not very computer savvy, but I could actually understand your instructions. Worked perfectly! Thanks again!

  • LabVIEW could not generate code for the shared variable.You must open the VI in the project that contains the library where the shared variable resides

    HI
    When I put a network shared variable with fifo RT activated on my diagram, the arrow is broken.and I' ve got this message:
    ""LabVIEW could not generate code for the shared variable.You must open the VI in the project that contains the library where the shared variable resides""
    If I uncheck FIFO RT option for this variable the arrow isn't broken anymore.
    I 've no idea how to correct this weird error?
    Autodeploy is on, and I've check copy / delete in diagram in tool/options\diagram
    regards,
    james

    Hello,
    I don't reproduce this error.
    Could you send your VI?
    Regards
    VéroniqueD
    NI France

  • Error - The file must match the template type. Upload one file per language

    hi,
    Error - The file must match the template type. Upload one file per language and territory combination.
    i am getting above error while registering RTF template in oracle application e -business suite using XML publisher admistrator responsibility.
    My work :
    i generated xml output using concurrent program.
    for this i used standard PO report,
    the executable name: POXPRPOP.
    i designed the template using MS Office word (for RTF template)
    for this :
    <?start: body?>
    <? for-each: G_Headers?>
    VENDOR:
    <?POH_VENDOR_NAME?>
    <?POH_VENDOR_COUNTRY?>
    PURCHASEORDER NO.
    <?POH_PO_NUM?>
    SHIP TO:
    <?C_COMPANY?>
    <?POH_SHIP_ADDRESS_LINE1?>
    <?POH_SHIP_COUNTRY?>
    BILL TO:
    <?C_COMPANY?>
    <?POH_BILL_ADDRESS_LINE1?>
    <?POH_BILL_COUNTRY?>
    <?end for-each?>
    <?end body?>
    saved this file as "Purchasing.rtf" on desk top
    i registered data definition
    name:purchase order data definition.
    code : short name of concurrent program.
    i try to create template Or register the template in oracle e-business suite.
    name: purchasing template
    code: concurrent program short name
    type : RTF.
    file : browse from desk top (purchasing.rtf)
    language:english
    territory: US.
    but i am getting above error
    could any one help to come out of this problem.
    thank you
    regarding,
    sai krishna@cavaya

    Hi,
    I am getting the error as
    The file must match the template type. Upload one file per language and territory combination.
    I have checked the template name. It doesn't exist already. Please help me.
    Thanks in Advance,
    Jeganathan

  • Error consuming Web service - content type text/xml;charset=utf-8 of the response message does not match the content type of the binding

    Hi all,
    We are trying to interact with Documentum server through DFS exposed WCF which communicates through port 9443 and we are provided with documentum issued Public Key certificates. We have successfully imported the certificates in client machine and configured
    the bindings as below in our .Net web application config file.
    <system.serviceModel>
    <bindings>
    <wsHttpBinding>       
    <binding
    name="ObjectServicePortBinding1">
    <security
    mode="Transport">
    <transport
    clientCredentialType="None"
    proxyCredentialType="None"
    realm=""
    />
    <message
    clientCredentialType="Certificate"
    algorithmSuite="Default"
    />
    </security>
    </binding>
    <binding
    name="QueryServicePortBinding">
    <security
    mode="Transport">
    <transport
    clientCredentialType="None"
    proxyCredentialType="None"
    realm=""
    />
    <message
    clientCredentialType="Certificate"
    algorithmSuite="Default"
    />
    </security>
    </binding>
    </wsHttpBinding>
    </bindings>
    Also, we set the message encoding as MTOM and the wcf client object initialization code snippet is as below,
    ObjectServicePortClient
    serviceClient = new
    ObjectServicePortClient(new
    WSHttpBinding("ObjectServicePortBinding1"),
    new
    EndpointAddress(UriUtil.ObjectServiceUri));
    if (serviceClient.Endpoint.Binding
    is
    WSHttpBinding)
       WSHttpBinding
    wsBinding = serviceClient.Endpoint.Binding as
    WSHttpBinding;
    wsBinding.MessageEncoding =
    "MTOM".Equals(transferMode) ?
    WSMessageEncoding.Mtom :
    WSMessageEncoding.Text;
    serviceClient.Endpoint.Behaviors.Add(new
    ServiceContextBehavior(Config.RepositoryName,
    Config.DocumentumUserName,
    Config.DocumentumPassword));
    When we execute the above code, we are getting error message as below,
    Exception: The content type text/xml;charset=utf-8 of the response message does not match the content type of the binding (multipart/related; type="application/xop+xml"). If using a custom encoder, be sure that the IsContentTypeSupported
    method is implemented properly. The first 407 bytes of the response were: '<?xml version="1.0" ?><S:Envelope xmlns:S="http://schemas.xmlsoap.org/soap/envelope/"><S:Body><S:Fault xmlns:ns4="http://www.w3.org/2003/05/soap-envelope"><faultcode>S:VersionMismatch</faultcode><faultstring>Couldn't
    create SOAP message. Expecting Envelope in namespace http://schemas.xmlsoap.org/soap/envelope/, but got http://www.w3.org/2003/05/soap-envelope </faultstring></S:Fault></S:Body></S:Envelope>'
    Then, we changed the bindings as below
    <system.serviceModel>
    <bindings>
    <wsHttpBinding>       
    <binding
    name="ObjectServicePortBinding1">
    <security
    mode="Transport">
    <transport
    clientCredentialType="Certificate"
    proxyCredentialType="None"
    realm=""
    />
    <message
    clientCredentialType="Certificate"
    algorithmSuite="Default"
    />
    </security>
    </binding>
    <binding
    name="QueryServicePortBinding">
    <security
    mode="Transport">
    <transport
    clientCredentialType="
    Certificate"
    proxyCredentialType="None"
    realm=""
    />
    <message
    clientCredentialType="Certificate"
    algorithmSuite="Default"
    />
    </security>
    </binding>
    </wsHttpBinding>
    </bindings>
    We are getting another error message,
    Exception: The client certificate is not provided. Specify a client certificate in ClientCredentials.
    Any pointers on resolving this issue would be highly helpful.
    Thanks

    Hi Dhanasegaran,
      As per your case, the corresponding details which may guide you to resolve this issue:
    1. First of all, you can try to call the wcf service directly from the browser & check where it will point out the correct location.
    2. In config file ,Set IncludeExceptionDetailInFaults to true to enable exception information to flow to clients for debugging purposes .
    Set this to true only during development to troubleshoot a service like below :
    <serviceBehaviors>
      <behavior name="metadataAndDebugEnabled">
        <serviceDebug
          includeExceptionDetailInFaults="true"   
    />
        <serviceMetadata
          httpGetEnabled="true"
          httpGetUrl=""   
    />
      </behavior>
    </serviceBehaviors>
    3. I suggest you to change that <security mode ="TransportWithMessageCredential"> instead of <security mode ="Transport">
     for more information, refer the following link :
    https://msdn.microsoft.com/en-us/library/aa354508(v=vs.110).aspx

  • "The CREATE USER statement must be the only statement in the batch" in SQL Azure - why? what to do?

    I'm getting an error on a line in the middle of a larger sql script, only in SQL Azure.
    IF NOT EXISTS (SELECT * FROM sys.database_principals WHERE name = N'foouser')
    CREATE USER [foouser] FOR LOGIN [foouser] WITH DEFAULT_SCHEMA=[dbo]
    GO
    Error: "The CREATE USER statement must be the only statement in the batch."
    I don't actually understand what 'the only statement in the batch' means.
    What is a batch? Is it a SQL file? Is it related to a 'GO' statement or an 'IF' statement? What is the reason for the error? And how do I avoid it?
    Thanks,
    Tim

    >IF...ELSE imposes conditions on the execution of a Transact-SQL statement
    I understand the general purpose of an If statement. I could let go of our definition of statement counting disagreeing too except that because of the error I'm stuck.
    It's less important for Create User but what I am really puzzled over now is a very similar issue how am I supposed to do a safe version of CREATE LOGIN, when I don't know whether a login has been previously created on the server or whether I
    am setting up the database on a clean server?
    IF NOT EXISTS (SELECT * FROM sys.server_principals WHERE name = N'foouser')
    CREATE LOGIN [foouser] WITH PASSWORD = 'asdfasdf'
    GO
    If I try and execute this script, it throws the same error as above.
    The first unworkable workaround idea is to omit the if statement
    CREATE LOGIN [foouser] WITH PASSWORD = 'asdfasdf'
    GO
    But if the login already exists on the server (because a similar script was already run), then the script throws an error.
    The second unworkable workaround idea is to do
    DROP LOGIN [foouser]
    GO
    CREATE LOGIN [foouser] WITH PASSWORD = 'asdfasdf'
    GO
    Obviously this throws an error in the second block if the login doesn't already exist on the server.
    The third workaround idea I have is to go conditional by putting an IF condition around DROP instead of CREATE:
    Unfortunately that doesn't work for me either!
    "The DROP LOGIN statement must be the only statement in the batch"
    (This is despite the fact that 'drop login' is listed on the
    supported commands page, not the partially supported page..?! Which disagrees with the notes on
    this page.)
    Anyway the real question I am interesting in addressing is: is there actually a way to have a 'Create/Delete login
    if exists' operation which is SQL-Azure compatible and doesn't throw me error messages (which messes with the sql execution tool I am using)?
    If there is no way, I would like to believe it's because it would be a bad idea to do this. But in that case why is it a bad idea?
    Tim

  • While editing a scanned pdf, Acrobat will not recognize the current font & change to very different font. How can I choose the font I want to match the current document?

    While editing a scanned pdf, Acrobat will not recognize the current font & change to very different font. How can I choose the font I want to match the current document?

     Thanks for answering. The version is XI.0.10. I just did the update yesterday hoping that I could now properly edit a scanned pdf document. Yes, it's happening on most all scanned documents. I followed your steps & found the list of fonts used in the document & then attempted to edit. The same occurs. When I type in a correction, I get an error alert... "the original font (in this case Fd 5805) is not available or can't be used in editing. Acrobat is using the font Minion Pro in its place." 
    When I select the text & right click as you suggested, my only choices are cut, copy, delete or select all, no "edit text".
    I have no other options to choose another font. Thanks for any help you can direct my way. 
    Debbie
          From: sukritd15 <[email protected]>
    To: Deborah Karr <[email protected]>
    Sent: Friday, February 13, 2015 5:35 AM
    Subject:  While editing a scanned pdf, Acrobat will not recognize the current font & change to very different font. How can I choose the font I want to match the current document?
    While editing a scanned pdf, Acrobat will not recognize the current font & change to very different font. How can I choose the font I want to match the current document?
    created by sukritd15 in Creating, Editing & Exporting PDFs - View the full discussionHi Deborah , I would like to know couple of things before I assist you further.1.Which version of Acrobat are you using ?2.Is it happening for all the scanned PDF' or any particular PDF? You can try these steps,Launch the scanned PDF >right click >Document Properties(from the drop down list) >Fonts(on the dialog box)>From here you will get the fonts used in that PDF . While editing the PDF ,select the text that are editing or typing in with the help of selection tool .After you select the text ,right click on the text and choose "edit text" from the drop down list .From there you will be able to choose the desired font . RegardsSukrit Dhingra If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7190881#7190881 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7190881#7190881 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"  Start a new discussion in Creating, Editing & Exporting PDFs by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • The content type of the response message does not match the content type of the binding

    I have written an ASP.Net web service which returns english,chinese and portuguese data. Everything seemed working fine until the method retunred only english data. The moment it returns english, chinese and portuguese data I get the error:
    The content type text/html; charset=utf-8 of the response message does not match the content type of the binding (text/xml; charset=utf-8). If using
    a custom encoder, be sure that the IsContentTypeSupported method is implemented properly. The first 1024 bytes of the response were: 
    '<!DOCTYPE html> <html>     <head>         <title>Runtime Error</title>
            <meta name="viewport" content="width=device-width" />         <style>          body {font-family:"Verdana";font-weight:normal;font-size:
    .7em;color:black;}           p {font-family:"Verdana";font-weight:normal;color:black;margin- -5px}          b {font-family:"Verdana";font-weight:bold;color:black;margin-
             H1 { font-family:"Verdana";font-weight:normal;font-size:18pt;color:red }          H2 { font-family:"Verdana";font-weight:normal;font-size:14pt;color:maroon
    }          pre {font-family:"Consolas","Lucida Console",Monospace;font-size:11pt;margin:0;padding:0.5em;line-height:14pt}          .marker {font-weight:
    bold; color: black;text-decoration: none;}          .version {color: gray;}          .error {margin-bottom: 10px;}          .expandable
    { text-decoration:underline; font-weight:bold; color:navy; cursor:hand; }          @media screen and (max-width: 639px) {           pre { width: 440px; o'.
    It is not written using WCF ... any workarounds?!
    Thank you.

    Hi Raj Krish,
    For ASP.NET related issue, please post to the following forum:
    http://forums.asp.net/
    Regards,
    Barry
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • The DataSourceID of 'TopNavigationMenu' must be the ID of a control of type IHierarchicalDataSource.

    I'm getting this error and I haven't a clue as to what I did....
    Server Error in '/' Application.
    The DataSourceID of 'TopNavigationMenu' must be the ID of a control of type IHierarchicalDataSource.  A control with ID 'topSiteMap' could not be found.
    Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
    Exception Details: System.Web.HttpException: The DataSourceID of 'TopNavigationMenu' must be the ID of a control of type IHierarchicalDataSource.  A control with ID 'topSiteMap' could not be found.
    Source Error:
    An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
    Stack Trace:
    [HttpException (0x80004005): The DataSourceID of 'TopNavigationMenu' must be the ID of a control of type IHierarchicalDataSource. A control with ID 'topSiteMap' could not be found.]
    System.Web.UI.WebControls.HierarchicalDataBoundControl.GetDataSource() +1415249
    System.Web.UI.WebControls.HierarchicalDataBoundControl.ConnectToHierarchicalDataSource() +158
    System.Web.UI.WebControls.HierarchicalDataBoundControl.OnLoad(EventArgs e) +16
    System.Web.UI.Control.LoadRecursive() +47
    System.Web.UI.Control.LoadRecursive() +131
    System.Web.UI.Control.LoadRecursive() +131
    System.Web.UI.Control.LoadRecursive() +131
    System.Web.UI.Control.LoadRecursive() +131
    System.Web.UI.Control.LoadRecursive() +131
    System.Web.UI.Control.LoadRecursive() +131
    System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1061
    Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.42

    i see this today, the lesson learned is that i should reivew the uls log first
    http://archive.msdn.microsoft.com/ULSViewer/Release/ProjectReleases.aspx?ReleaseId=3308 .
    http://blogs.msdn.com/b/opal/archive/2009/12/22/uls-viewer-for-sharepoint-2010-troubleshooting.aspx .
    first, i found the same entry in uls log view, then going upwards, i can find something like follows:
    DelegateControl: Exception thrown while building custom control 'Microsoft.SharePoint.SPControlElement': Microsoft.SharePoint.WebPartPages.WebPartPageUserException: This page has encountered a critical error. Contact your system administrator if this problem
    persists.   
     at Microsoft.SharePoint.ApplicationRuntime.SafeControls.IsSafeControl(Boolean isAppWeb, Type type, String& unsafeErrorMessage)   
     at Microsoft.SharePoint.Utilities.SPUtility.CreateServerControlFromAssembly(String sControlAssembly, String sControlClass)   
     at Microsoft.SharePoint.SPControlElement.BuildCustomControl(TemplateControl tctlPage, String sControlAssembly, String sControlClass, String sControlSrc, XmlNode xnElementDefinition, SPFeatureDefinition featdefElement, String sElementId)   
     at Microsoft.SharePoint.WebControls.DelegateControl.BuildCustomControlResilient(SPControlElement ctlelemDefinition)
    The top of callstack suggest me there is something wrong with safe control setting. By comparing the web.config with backup, it seems two safe control entries was added by a custom solution. While the page opens after removing the safe control entry,
    i really cannot believe this can be the root cause, because i only know that missing safe control entry can cause error, i had never fixed error by removing safe control entry before.
          <SafeControl Assembly="SharePointProject, Version=1.0.0.0, Culture=neutral, PublicKeyToken=c221e46652bbe5bb" Namespace="SharePointProject.VisualWebPart" TypeName="*" Safe="True" />
          <SafeControl Assembly="SharePointProject, Version=1.0.0.0, Culture=neutral, PublicKeyToken=c221e46652bbe5bb" Namespace="SharePointProject.ListVisualWebPart" TypeName="*" Safe="True" />

  • Should I delete my old iPhoto Library Current folder once everything is transferred to Photos Library Current?    Does this mean that all my new photos on any device can come off my Mac and ONLY be in the Photos Library which is in the cloud?

    I have 2 questions about the new Photos app for Mac (I'm running 10.10.3 on my MacBook Air 1.8GHz Intel Core i5 mid 2012)):
    1.Should I delete my old iPhoto Library Current folder once everything is transferred to Photos Library Current?
    2. Does this mean that all my new photos on any device can come off my Mac and ONLY be in the Photos Library which is in the cloud?  That would free 59GB off my Mac and that would be very good.

    1.Should I delete my old iPhoto Library Current folder once everything is transferred to Photos Library Current?
    You can, but I would wait, until you have have been working with Photos for some time and are sure, that everything migrated well. There may be hidden flaws in your library and teething problems with Photos. Don't be in a hurry to abandon iPhoto completely. You may need to go back, until bugs have been fixed.  Th Photos Library does not duplicate the photos in your iPhoto Library. the media files are shared and do not need extra space: See:  Photos saves disk space by sharing images with your iPhoto or Aperture libraries - Apple Support
    2. Does this mean that all my new photos on any device can come off my Mac and ONLY be in the Photos Library which is in the cloud?  That would free 59GB off my Mac and that would be very good.
    If you have enough iCloud storage.  But Photos will still need space for local thumbnails on all devices.
    See:  Apple - OS X - Photos Preview
    Fill your library, not your device.
    iCloud Photo Library can help you make the most of the space on your Mac. When you choose “Optimize Mac Storage,” all your full-resolution photos and videos are stored in iCloud in their original formats, with storage-saving versions kept on your Mac as space is needed. You can also optimize storage on your iPhone, iPad, and iPod touch, so you can access more photos and videos than ever before. You get 5GB of free storage in iCloud — and as your library grows, you have the option to choose a plan for up to 1TB.

  • Error the entered value does not match the specified field type

    Hi,
    When I try to insert a null value to a field of the User Defined Table I am getting the error "The entered value does not match the specified field type" in SAP Business One version 2007 PL 42.
    Any help would be appreciated.
    Thanks in advance.
    Sudha.

    Hi Sudha,
    It probably have to do with how you defined the field.
    Is Null value allowed?
    What are the field definitions?
    Thanks,
    Jesper

  • The publisher of the uploaded package does not match the expected publisher . The publisher for this app is expected

    I have a Windows Phone Silverlight 8.1 project that i am trying to publish
    The publisher in the uploaded package does not match the
    expected publisher. The expected publisher for this app is: "CN=00000000-8F5B-44B4-BFC6-F16FB18F2358"
    I have the same Publisher Id set in the WMAppManifest file
    help me 
    thank you 

    Hi kadir u,
    >>The publisher in the uploaded package does not match the expected publisher. The expected publisher for this app is: "CN=00000000-8F5B-44B4-BFC6-F16FB18F2358"
    Based on the error information, we can see that the publisher value does not have the correct one. So please try to open the Package.appxmanifest, then modify the Publisher as "CN=00000000-8F5B-44B4-BFC6-F16FB18F2358":
    <Identity Name="*******"
    Publisher="CN=00000000-8F5B-44B4-BFC6-F16FB18F2358"
    Version="1.0.0.0" />
    Best Regards,
    Amy Peng
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • I've been using a flip video camera since 2009 and all of my videos are in the flipshare library.  What is the best way to burn all these videos to a DVD that will play on my DVD player/tv?

    I've been using a flip video camera since 2009 and all of my videos are in the flipshare library.  What is the best way to burn all these videos to a DVD that will play on my DVD player/tv?  The flipshare library is taking up too much space on my Macbook and I wanted to delete these videos once they were all tranferred to DVDs.
    Any help is greatly appreciated.

    Purplehiddledog wrote:
    I do backup with iCloud.  I can't wait until the new iMac is available so that I can once again have my files in more than 1 location without needing to rely solely on the cloud. 
    I also rely on iTunes and my MacBook and Time Machine as well as backing up to iCloud. I know many users know have gone totally PC free, but I chose to use iCloud merely as my third backup.
    I assume that the restore would result in my ability to open Pages and Numbers and fix the problem with deleting apps, but this would also mean that if my Numbers documents still exist solely within the app and are just not on iCloud for some reason that they would be gone forever.  Is that right?
    In a word, yes. In a little more detail.... When you restore from an iCloud backup, you must erase the device and start all over again. There is no other way to access the backup in iCloud without erasing the device. Consequently, you are starting all over again. Therefore, it would also be my assumption that Pages and Numbers will work again and that the deleting apps issues would be fixed as well.
    If the documents are not in the backup, and you do not have a backup elsewhere, the documents could be gone forever.

  • HELP   Upgraded to IPhoto 11 from IPhoto 8 and none of the pictures from the old library are showing in the new one.

    I upgraded my IPhoto 8 to IPhoto 11 and now none of the pictures from my previous albums are showing in the new version.  I hope someone has an answer to help!

    Since the iPhoto First Aid didn't help try this:
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    Download iPhoto Library Manager and launch.
    Click on the Add Library button,                         
    and select the library you want to add from those in the selection window.
    Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option
    In the next  window name the new library and select the location you want it to be placed.
    Click on the Create button.
    Note 1: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost.
    Note 2:  Your current library will be left untouched for further attempts at a fix if so desired.

Maybe you are looking for