The background thread running lazy writer encountered an I/O error

Hi I have a test server which has thrown the following error
File system error: A system error occurred while attempting to read or write to a file store. The system might be under memory pressure or low on disk space. Physical file: \\?\F:\MSAS11.DEPLOYAS\OLAP\Data\Prod_KCube.0.db\DIM Flags And Types.0.dim\3.Flag
Types Key.khstore. Logical file: . GetLastError code: 8. File system error: The background thread running lazy writer encountered an I/O error. Physical file: \\?\F:\MSAS11.DEPLOYAS\OLAP\Data\Prod_KCube.0.db\DIM Flags And Types.0.dim\3.Flag Types Key.khstore.
Logical file: . Errors in the OLAP storage engine: An error occurred while processing the 'Facts' partition of the 'Main Facts' measure group for the 'Prod_Cube' cube from the Prod_KCube database.
The cube sits on a not very well maintained server which is used by various users (it is a test server) with the following specs
Intel(R) Xenon(R) CPU x5690 @3.47GHz
24GB Ram
64 Bit operating system.
The Cube data and logs are on separate drives and have plenty data but the C drive (where SQL Server is installed) only has3.5Gb of space left.
It's a fairly big cube and I've managed to get it running by processing dimensions and facts bit by bit but errors when processed all together.
What could be causing the errors above?

Hi aivoryuk,
According to your description, you get the lazy writing error when processing partitions. Right?
In this scenario, the issue may cause by low memory for SSAS and lack of disk space. Please consider configure
Server Properties (Memory Page) and increase
memory setting for SSAS. If the .cub file is located in C drive, please reserve more disk space.
Please refer to a similar thread below:
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/21bf84c5-f89a-464a-a5f1-2649fae5eb1e/while-processing-large-cubes-various-file-system-errors-the-background-thread-running-lazy-writer?forum=sqlanalysisservices
Best Regards,
Simon Hou
TechNet Community Support

Similar Messages

Camera shows a black preview, if there is any operation running in the background thread.

Hi,
Camera launched from app using UIImagePickerViewController shows a black preview, if there is any operation running in the background thread. This was not an issue in ios 6. Can you please fix this with next update?
Thanks & Regards,
Dileep Kumar

Some things that might help:
1. Only the most recently used apps actually occupy memory (used to be the most recent 4, but may have changed in the latest iPhones). After 4 (or so), IOS writes them out of active memory, as it does for even the latest 4 if there's no activity for a long time. So the business of closing all the open apps, apart from the most recent ones doesn't make a difference. Tis article has a good explanation:
http://www.speirs.org/blog/2012/1/2/misconceptions-about-ios-multitasking.html
2. There are settings about background app activity that might help:
- Settings, General, Background App Refresh controls which apps can update their data in the background
- Settings, Notifications controls which apps can tell you things, which they have to wake up to do.
- Settings, Privacy, Location Services controls which apps monitor your location - another activity that uses resources
Hope some of that helps

The report l runs very night and gets ended with error

Dear all,
I am facing a problem in solution manger. There is an report (Program/Command RDSMOPSOL_MONIREFRESH ) will runs very night and get ended with error and there is Run-time error "MESSAGE_TYPE_X".
Please suggest how to solve the problem.
Is this report is necessary   for the system because it is not mention in the sap stand jobs.
SM37 log
Job started
Step 001 started (program RDSMOPSOL_MONIREFRESH, variant &0000000000875, user ID BASIS)
Opening and closing session started. Session SM2000000000065
Opening and closing the session was successful. Session: SM2000000000065
Opening and closing session started. Session SM2000000000005
ABAP/4 processor: MESSAGE_TYPE_X
Job cancelled
SM:CSA SESSION REFRESH
No. Program/Command       Prog. type Spool list Parameter      User Lang.
1 RDSMOPSOL_MONIREFRESH ABAP                  &0000000000876 BASIS EN
Sm21 log
00:00:50 DIA 00 000 SAPSYS            EEA OPERATION MODES: Switch to operation mode Normal triggered
00:30:57 BTC 08 200 BASIS             R68 Perform rollback
00:30:57 BTC 08 200 BASIS             AB0 Run-time error "MESSAGE_TYPE_X" occurred
00:30:57 BTC 08 200 BASIS             AB1 > Short dump "081112 003057 sapsm BASIS " generated
00:30:57 BTC 08 200 BASIS             D01 Transaction Canceled 00 671 ( MESSAGE_TYPE_X 20081112003057sapsm BASIS 2001 )
00:30:57 BTC 08 200 BASIS             R68 Perform rollback
00:30:57 BTC 08 200 BASIS             AB0 Run-time error "MESSAGE_TYPE_X" occurred
Details
Recording at local and central time........................ 12.11.2008 00:30:57
Task................ 05312 . 08 B8 BTC background processor No. 08
User................ BASIS
Client.............. 200
Terminal............
Session............. 1
Transaction code....
Program name........
Problem class....... T    Transaction Problem
Development class... SABP
Further details for this message type
Module name......... abdynpro
Line................ 1133
Error text.......... ab_jmess
Documentation for system log message AB 0 :
The specified runtime error has occurred in the system.
Parameter
a.. MESSAGE_TYPE_X
Technical details
File................ 000048
Position............ 0000253620
Entry type.......... l      ( Error (Module, Row)            )
Message ID.......... AB 0
Variable parts...... ab_jmess                                            abdynpro1133
Time     Ty. Nr Cl. User         Tcod MNo Text                                                                    Date : 12.11.08
00:30:57 BTC 08 200 BASIS             AB1 > Short dump "081112 003057 sapsm BASIS " generated
etails
ecording at local and central time........................ 12.11.2008 00:30:57
ask................ 05312 . 08 B8 BTC background processor No. 08
ser................ BASIS
lient.............. 200
erminal............
ession............. 1
ransaction code....
rogram name........
roblem class....... K    SAP Web AS Problem
evelopment class... SABP
BAP Mini dump
ate................ 20081112
ime................ 003057
ost................ sapsm
ser................ BASIS
ocumentation for system log message AB 1 :
A short dump was generated for the specified program termination.
You can analyze this short dump in the system log evaluation by
selecting this line or evaluating Table SNAP (Transaction ST22).
echnical details
ile................ 000048
osition............ 0000253800
ntry type.......... s      ( ABAP Runtime Error             )
essage ID.......... AB 1
ariable parts...... 081112003057sapsm   BASIS
Time     Ty. Nr Cl. User         Tcod MNo Text                                                                    Date : 12.11.08
00:30:57 BTC 08 200 BASIS             D01 Transaction Canceled 00 671 ( MESSAGE_TYPE_X 20081112003057sapsm BASIS 2001 )
Details
Recording at local and central time........................ 12.11.2008 00:30:57
Task................ 05312 . 08 B8 BTC background processor No. 08
User................ BASIS
Client.............. 200
Terminal............
Session............. 1
Transaction code....
Program name........
Problem class....... K    SAP Web AS Problem
Development class... SDYN
Module name.........
Location............
T100................ 00                  671
Parameters..........
Documentation for system log message D0 1 :
The transaction has been terminated. This may be caused by a
termination message from the application (MESSAGE Axxx) or by an
error detected by the SAP System due to which it makes no sense to
proceed with the transaction. The actual reason for the termination
is indicated by the T100 message and the parameters.
Additional documentation for message 00                  671
ABAP/4 processor: &
No documentation exists for message 00671
Parameter
a.. MESSAGE_TYPE_X
00:30:57 BTC 08 200 BASIS             R68 Perform rollback
Details
Recording at local and central time........................ 12.11.2008 00:30:57
Task................ 05312 . 08 B8 BTC background processor No. 08
User................ BASIS
Client.............. 200
Terminal............
Session............. 1
Transaction code....
Program name........
Problem class....... W    Warning
Development class... STSK
Further details for this message type
Module name......... thxxhead
Line................ 1240
Error text..........
Caller.............. ThIRoll
Reason/called....... roll ba
Documentation for system log message R6 8 :
An error has causes an SAP rollback. All database updates are reset.
Technical details
File................ 000048
Position............ 0000254520
Entry type.......... m      ( Error (Function,Module,Row)    )
Message ID.......... R6 8
Variable parts......                                       ThIRollroll bathxxhead1240
Regards,
Shiva

Hi karteek,
I have check there is Switch of operation mode but when I have checked the t-code sm63 there is no new mode are in normal mode.
There is one thing I want to ask dose this report (Program/Command RDSMOPSOL_MONIREFRESH ) run   in your system or any one server because I have think there is some problem in job shued
and is also not mention in the sap stand jobs.
there is an error in sm21 in job.
BASIS        SM36 EFK BP_CHECK_REPORT_VALUES: Invalid program values found. Reason:
BASIS        SM36 EFC > Program RDSMOPSOL_MONIREFRESH has no variants, but a variant was specified
Is this SM37 log
Job started
Step 001 started (program RDSMOPSOL_MONIREFRESH, variant &0000000000875, user ID BASIS)
Opening and closing session started. Session SM2000000000065
Opening and closing the session was successful. Session: SM2000000000065
Opening and closing session started. Session SM2000000000005
ABAP/4 processor: MESSAGE_TYPE_X
Job cancelled
Sm21 log
SAPSYS            EEA OPERATION MODES: Switch to operation mode Normal triggered
BASIS             R68 Perform rollback
BASIS             AB0 Run-time error "MESSAGE_TYPE_X" occurred
BASIS             AB1 > Short dump "081111 003056 sapsm BASIS " generated
BASIS             D01 Transaction Canceled 00 671 ( MESSAGE_TYPE_X 20081111003056sapsm BASIS 2001 )
BASIS             R68 Perform rollback
BASIS             R49 Communication error, CPIC return code 017, SAP return code 223
BASIS             R64 > CPI-C function: CMINIT(SAP)
*BASIS        SM36 EFK BP_CHECK_REPORT_VALUES: Invalid program values found. Reason:*
*BASIS        SM36 EFC > Program RDSMOPSOL_MONIREFRESH has no variants, but a variant was*
specified
BASIS             R68 Perform rollback
BASIS             AB0 Run-time error "MESSAGE_TYPE_X" occurred
BASIS             AB1 > Short dump "081111 220948 sapsm BASIS " generated
BASIS             D01 Transaction Canceled 00 671 ( MESSAGE_TYPE_X 20081111220948sapsm BASIS 2001 )
Details Page 2 Line 6 System Log: Local Analysis of sapsm                     1
Time     Ty. Nr Cl. User         Tcod MNo Text
00:00:51 DIA 00 000 SAPSYS            EEA OPERATION MODES: Switch to operation mode Normal triggered
Details
Recording at local and central time........................ 13.11.2008 00:00:51
Task................ 04100 . 00 D0 Dialog work process No. 00
User................ SAPSYS
Client.............. 000
Terminal............
Session............. 1
Transaction code....
Program name........
Problem class....... S    Operation Trace
Development class... SBTC
Sm63
Start/end time   Name of the active operation mode
   00.00 - 01.00    Normal
   01.00 - 02.00    Normal
   02.00 - 03.00    Normal
   03.00 - 04.00    Normal
   04.00 - 05.00    Normal
   05.00 - 06.00    Normal
   06.00 - 07.00    Normal
   07.00 - 08.00    Normal
   08.00 - 09.00    Normal
   09.00 - 10.00    Normal
   10.00 - 11.00    Normal
   11.00 - 12.00    Normal
   12.00 - 13.00    Normal
   13.00 - 14.00    Normal
   14.00 - 15.00    Normal
   15.00 - 16.00    Normal
   16.00 - 17.00    Normal
   17.00 - 18.00    Normal
   18.00 - 19.00    Normal
   19.00 - 20.00    Normal
   20.00 - 21.00    Normal
   21.00 - 22.00    Normal
   22.00 - 23.00    Normal
   23.00 - 00.00    Normal
Regards,

How can I find out what is running in the background and running my batterie down

How can I find out what is running in the background

Hi simpbarby,
Welcome to the Support Communities!
The links below will help you understand what apps are running on your iPhone. You can quit the ones that you aren't using.
iOS: Understanding multitasking
http://support.apple.com/kb/ht4211
This link will provides tips to conserving battery life:
Apple - Batteries - iPhone
http://www.apple.com/batteries/iphone.html
Optimize Your Settings
Depending on how they are set, a few features may decrease your iPhone battery life. The tips below apply to an iPhone running iOS 7.0 or later.
Enable Wi-Fi: Having Wi-Fi enabled helps consume less power when doing activities that access data. Go to Settings > Wi-Fi and log in to a Wi-Fi network.
Adjust brightness: Dim the screen or turn on Auto-Brightness to extend battery life. Turning on Auto-Brightness allows the screen to adjust based on lighting conditions.
Fetch new data less frequently: The more frequently email or other data is fetched, the quicker your battery may drain. To fetch data manually: Go to Settings > Mail, Contacts, Calendars > Fetch New Data and tap Manually.
Turn off push notifications: Apps with Push Notification alert you of new data, which may impact battery life. To disable, go to Settings > Notifications, choose the app you want to disable, and do the following:
Change Alert Style to None.
Turn Badge App Icon off.
Turn Sounds off.
Note: New data will be received when you open the app.
Minimize use of location services: Apps that actively use location services, such as Maps, may reduce battery life. You can see which applications have recently used location services by going to Settings > Privacy > Location Services.
Use Airplane Mode in low- or no-coverage areas: Your iPhone always tries to maintain a connection with the cellular network, which may use more power in low- or no-coverage areas. Turn on Airplane Mode to increase battery life in these situations.
Viewing Usage StatisticsKnowing and understanding your iPhone usage can help you better manage your battery life. To view your iPhone usage statistics, go to Settings > General > Usage. Under “Time since last full charge”:
Usage: Amount of time iPhone has been awake and in use since the last full charge. iPhone is awake when you’re on a call, using email, listening to music, browsing the web, or sending and receiving text messages, or during certain background tasks such as auto-checking email.
Standby: Amount of time iPhone has been powered on since its last full charge, including the time the phone has been asleep.
I hope this information helps ....
Have a great day!
- Judy

Unfirmed purchase reqs not getting cancelled in the background MRP run

Good morning,
The system has created Purchase requisitions for 2010 due to the setting in the MRP run. we want to change it to planned orders outside the Vendor lead time and when i run a REGEN MRP with setting 2 (Purchase requisitions in opening period) its not happening. When i run indivudual MRP with MD03 with the same setting its alright, purchase requisitions are deleted and its converted into Planned orders. Can anyone please throw some light on to make backgrouond MRP run delete the Purchase requisition and create planned orders.

Jags,
You must delete the offensive PRs first. Regardless of the MRP settings, MRP will still decide that the PRs are valid and will leave them alone. It will not 'change' them into planned orders.
Run Regenerative MRP with your new settings (Create purchase reqs as '2') but also run your MRP in planning mode '3', delete and recreate planning data. It will delete all existing unfixed purchase requisitions, and then run MRP.
Rgds,
DB49

I'm developing a test system that reqiures that I run a TCP/IP session in the background while running TestStand. How could I incorporate this TCPIP vi into the TestStand Operator Interface ?

Test Engineering
Empower RF Systems Inc.

Mal,
If you have the LabVIEW Operator Interace, you can place your TCP/IP Vi anywhere you want. Either at the beginning of the execution, when a particular sequence is running, when a user logs in, etc. Since you have the LV code, you can just add your TCP/IP as a subVI in the right place. You could also place a button in the front panel that will allow you to CONNECT/DISCONNECT by calling your VIs.
Does this help?
Azucena

I have just done a c drive clean and now i have a problem with wed site, the background will not load and some web i get error massages

Im using explorer to ask this question
here a screen shot of ninemsn web site
[http://example.com http://imageshack.us/photo/my-images/830/screenshot019ez.jpg/]
one of the error massage i get,
File not found
Firefox can't find the file at http://www.raafsquad.com/welcome.htm.
Check the file name for capitalization or other typing errors.
Check to see if the file was moved, renamed or deleted.

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
* Tools > Options > Privacy > Cookies: "Show Cookies"

How do you monitor a background thread and update the GUI

Hello,
I have a thread which makes its output available on PipedInputStreams. I should like to have other threads monitor the input streams and update a JTextArea embedded in a JScrollPane using the append() method.
According to the Swing tutorial, the JTextArea must be updated on the Event Dispatch Thread. When I use SwingUtilities.invokeLater () to run my monitor threads, the component is not redrawn until the thread exits, so you don't see the progression. If I add a paint () method, the output is choppy and the scrollbar doesn't appear until the thread exits.
Ironically, if I create and start new threads instead of using invokeLater(), I get the desired result.
What is the correct architecture to accomplish my goal without violating Swing rules?
Thanks,
Brad
Code follows:
import java.lang.*;
import java.io.*;
import javax.swing.*;
import javax.swing.text.*;
import java.awt.*;
import java.awt.event.*;
public class SystemCommand implements Runnable
     private String[] command;
     private PipedOutputStream pipeout;
     private PipedOutputStream pipeerr;
     public SystemCommand ( String[] cmd )
          command = cmd;
          pipeout = null;
          pipeerr = null;
     public void run ()
          exec ();
     public void exec ()
          // --- Local class to redirect the process input stream to a piped output stream
          class OutputMonitor implements Runnable
               InputStream is;
               PipedOutputStream pout;
               public OutputMonitor ( InputStream i, PipedOutputStream p )
                    is = i;
                    pout = p;
               public void run ()
                    try
                         int inputChar;
                         for ( ;; )
                              inputChar = is.read();
                              if ( inputChar == -1 ) { break; }
                              if ( pout == null )
                                   System.out.write ( inputChar );
                              else
                                   pout.write ( inputChar );
                         if ( pout != null )
                              pout.flush ();
                              pout.close ();
                         else
                              System.out.flush();
                    catch ( Exception e ) { e.printStackTrace (); }
          try
               Runtime r = Runtime.getRuntime ();
               Process p = r.exec ( command );
               OutputMonitor out = new OutputMonitor ( p.getInputStream (), pipeout );
               OutputMonitor err = new OutputMonitor ( p.getErrorStream (), pipeerr );
               Thread t1 = new Thread ( out );
               Thread t2 = new Thread ( err );
               t1.start ();
               t2.start ();
               //p.waitFor ();
          catch ( Exception e ) { e.printStackTrace (); }
     public PipedInputStream getInputStream () throws IOException
          pipeout = new PipedOutputStream ();
          return new PipedInputStream ( pipeout );
     public PipedInputStream getErrorStream () throws IOException
          pipeerr = new PipedOutputStream ();
          return new PipedInputStream ( pipeerr );
     public void execInThread ()
          Thread t = new Thread ( this );
          t.start ();
     public static JPanel getContentPane ( JTextArea ta )
          JPanel p = new JPanel ( new BorderLayout () );
          JPanel bottom = new JPanel ( new FlowLayout () );
          JButton button = new JButton ( "Exit" );
          button.addActionListener ( new ActionListener ( )
                                   public void actionPerformed ( ActionEvent e )
                                        System.exit ( 0 );
          bottom.add ( button );
          p.add ( new JScrollPane ( ta ), BorderLayout.CENTER );
          p.add ( bottom, BorderLayout.SOUTH );
          p.setPreferredSize ( new Dimension ( 640,480 ) );
          return p;
     public static void main ( String[] argv )
          // --- Local class to run on the event dispatch thread to update the Swing GUI
          class GuiUpdate implements Runnable
               private PipedInputStream pin;
               private PipedInputStream perr;
               private JTextArea outputArea;
               GuiUpdate ( JTextArea textArea, PipedInputStream in )
                    pin = in;
                    outputArea = textArea;
               public void run ()
                    try
                         // --- Reads whole file before displaying...takes too long
                         //outputArea.read ( new InputStreamReader ( pin ), null );
                         BufferedReader r = new BufferedReader ( new InputStreamReader ( pin ) );
                         String line;
                         for ( ;; )
                              line = r.readLine ();
                              if ( line == null ) { break; }
                              outputArea.append ( line + "\n" );
                              // outputArea.paint ( outputArea.getGraphics());
                    catch ( Exception e ) { e.printStackTrace (); }
          // --- Create and realize the GUI
          JFrame f = new JFrame ( "Output Capture" );
          f.setDefaultCloseOperation ( JFrame.EXIT_ON_CLOSE );
          JTextArea textOutput = new JTextArea ();
          f.getContentPane().add ( getContentPane ( textOutput ) );
          f.pack();
          f.show ();
          // --- Start the command and capture the output in the scrollable text area
          try
               // --- Create the command and setup the pipes
               SystemCommand s = new SystemCommand ( argv );
               PipedInputStream stdout_pipe = s.getInputStream ();
               PipedInputStream stderr_pipe = s.getErrorStream ();
               // --- Launch
               s.execInThread ( );
               //s.exec ();
               // --- Watch the results
               SwingUtilities.invokeLater ( new GuiUpdate ( textOutput, stdout_pipe ) );
               SwingUtilities.invokeLater ( new GuiUpdate ( textOutput, stderr_pipe ) );
               //Thread t1 = new Thread ( new GuiUpdate ( textOutput, stdout_pipe ) );
               //Thread t2 = new Thread ( new GuiUpdate ( textOutput, stderr_pipe ) );
               //t1.start ();
               //t2.start ();
          catch ( Exception e ) { e.printStackTrace (); }


Thanks for pointing out the SwingWorker class. I didn't use it directly, but the documentation gave me some ideas that helped.
Instead of using invokeLater on the long-running pipe-reader object, I run it on a normal thread and let it consume the output from the background thread that is running the system command. Inside the reader thread I create a tiny Runnable object for each line that is read from the pipe, and queue that object with invokeLater (), then yield() the reader thread.
Seems like a lot of runnable objects, but it works ok.

How to terminate/destroy a user thread running in background?

Hi All!
I m using t.destroy() to stop a background running thread, as t.stop() is depricated in Java 2. I implement Runnable in the background thread. On calling t.destroy() NoSuchMethodException; don't know whats the problem there?

I still don't see any solutions to the issues with performing a Runtime.exec, or stopping a thread from the outside.
Here's my situation - I have need to make a framework that processes "work" asynchronously. Work is an abstract concept that is realized (an interface is implemented) by other classes. Work comes into the system and is persisted. A seperate mechanism gets the work and processes the work when possible.
Processing "work" is an abstract concept that is realized (interface is implemented) by other classes.
All the threading/asynchronous behavoir is in the framework.
Thus I can't control how work processing occurs within the framework. At certain points I do have to be able to interrupt the work from the outside. Thus the framework threads are busy doing "work" (defined in a class not "known" to the framework) - but the framework has to shutdown.
So I'm left with thread.stop
Yes - the framework threads are designed around a volitile "continueProcessing" flag.
Yes - some of the tasks can perform their work in piecemeal and use this flag.
No - not all the work can be done in a piecemeal way.
This whole framework is a solution to situations where multiple high-CPU, high-memory, asynchronous tasks get flooded into the app-server (we don't control the clients - they are outside this business).
So we persist the request, and have a framework polling for more work. That way even if 10000 requests hit us as the same time (it has happened); we don't get floored.
We tried sevlet and JMS processing, but those both have back-log limitations. We could poll for work, then send the request to a seperate JMS queue that terminates in a MDB but this exposes an entry point into work processing. And the whole point of this is to control the amount of processing occurring at any given time, without losing any of the requests.

Adobe Bridge not running in the background

I have bridge setup to load and run in the background when I start windows. However it doesn't run in the background but launches and runs as normal.the icon does not load in the control panel as does other programs that load and run in the background. Running a 64bit windows 7 machine

Ashutosh.Nigam wrote:
If you want to start Br at login, Follow below mentioned steps:
In Bridge , choose Edit > Preferences (for Windows) or Adobe Bridge > Preferences (for Mac OS).
Choose Advanced.
Select Start Bridge At Login.
You can disable this option at any time, Hope this helps.
I don't have CC but others say the standard option is not there. Can you confirm it is?

Run Automator in the background without status bar icon

Hello,
I hope this is the right place and thank you in advance for the help.
I am trying to run an Automator App in the background without running in the status bar as it takes the focus from the current application that I am working in. Is there a way to do this? Some Google Fu stats that I can make some changes to the info.plist of the package contents of the application by changing the LSUIElement. However when I follow those instructions, I am still unable to run the application in the background completely.
For what it is worth, I am running a brand new Mac Mini with Yosemite. Any help is greatly appreciated. Please let me know if I need to provide any more detail.
Cheers!

Items from various actions such as Ask for Finder Items or Get Selected Finder Items can be passed to the Run Shell Script action. Saving the workflow as an application will run it without launching Automator.
A file with a .php extension would be associated with whatever application created it (or a default application that can handle HTML files). A Unix Executable File isn't seen as an "application" by the system, so you will need to call it directly with your parameters.

Is it possible to debug a Job which already executed in the Background.

Hi Friends,
My Z program has a bug when run it in Quality System.
If I run this program in foreground to debug, its giving TIME OUT dump.
If i try to run it in Background and started DEBUG mode using JDBG.
Still one of the table fetch gives TIME OUT dump.
Is there any possibility to DEBUG the already executed job?
Regards,
VIJI

Hi,
If the job is running go to SM50..
Select the process:
In the menu..Program/session -> program -> debugging..
OR
Fix the break points.
2) Create job.
3) Go SM37
4) Select the job and write "jdbg" in command line.
1) Use Transaction SM50. This would give you a view of all the background
processes running in the server.
2) Choose your background process from the list and got to
MENU "Program/Mode"->"Program"->"Debugging".
Regards,
Suresh Kumar

[FOREXAM] When the gc thread cannot be invoked?

Hi, I considered the following statement:
The garbage collection thread can be invoked at any time
as true, but according to a Mock exam is false. Can anyone tell me why? When is not possible to call the gc thread?
Marco

You have no control over when the gc thread runs. Calls to System.gc() just act as hints to the gc that it should run, but it will still do it in its own sweet time.

Developer Mode Exception encountered in item EffectiveFrom Error

In Oracle apps , When I click on Configurator Developer, I get this error on the very first page :
Developer Mode Exception encountered in item EffectiveFrom Error: The item EffectiveFrom has a type (DATETIME) which is incompatible with the associated VO attribute, EffectFromAsString (VARCHAR2). Action: Make sure they are compatible by either changing the datatype or the attribute associated with the item.
Developer Mode Exception encountered in item EffectiveTo Error: The item EffectiveTo has a type (DATETIME) which is incompatible with the associated VO attribute, EffectUntilAsString (VARCHAR2). Action: Make sure they are compatible by either changing the datatype or the attribute associated with the item.
Developer Mode Exception encountered in item EffectiveFrom Error: The item EffectiveFrom has a type (DATETIME) which is incompatible with the associated VO attribute, EffectFromAsString (VARCHAR2). Action: Make sure they are compatible by either changing the datatype or the attribute associated with the item.
Developer Mode Exception encountered in item EffectiveTo Error: The item EffectiveTo has a type (DATETIME) which is incompatible with the associated VO attribute, EffectUntilAsString (VARCHAR2). Action: Make sure they are compatible by either changing the datatype or the attribute associated with the item.
I havent been working in any seeded applications lately . I am working on some other custom application and have depolyed it on server and this error did not occur untill yesterday.
There is a profile option : FND: Developer Mode which is set to nothing on server.
Also I have enabled developer mode to true in zone.properties
could any of this be a problem ?
Thanks
Edited by: user633772 on Sep 12, 2008 11:42 AM

A few doubts :
1. How is it different to set prof. opt. from Func Admin to setting it from Sys Admin ?
2. Do I need apache bounce after this ?
3. I had not touched these p/os and the values for site/user were null from before, so why do I see the error and others do not ?
4. Apart from all the error I posted in this thread I also get some error when I launch configurator from my custom webpage -
error is like this :
The OA passivation framework coding standard has been violated. The view object with full name, CZApplicationModule.TreeViewUsage, is not properly prepared for row insertion. Either setMaxFetchSize(0) or executeQuery() (or any equivalent method that ends up executing the view object query) must be called on the view object before new rows are inserted. For a detail view object in a master - detail relationship, executeQuery() (or any equivalent method that ends up executing the view object query) must be called instead of setMaxFetchSize(0) on the detail view object before new rows are inserted into the detail view object. setMaxFetchSize(0) call on the detail view object could cause a number of adverse effects.
Thanks

Background java thread stops after running the fx thread

in my server thread i am accepting a file . so i used Platform.runLater() to display a scene that gets confirmation from user. But when it reach the scene it is not going back to the server thread.
class server implements Runnable
public void run()
while(true)
// accepts client
Platform.runLater(new Runnable(){ // after this fx its not goin to the while
// display confirmation message
// writing the file
}

Post a bit more code, calling Platform.runLater() will not cause this behaviour. In fact, it should immediately return and continue with the while. You can add print statements if you want to be sure what is happening.
The only reason I could think of is if the while(true) is already on the FX application thread but that seems unlikely.

The background thread running lazy writer encountered an I/O error

Similar Messages

Maybe you are looking for