The build specifications does not support VIs with dynamic dispatch terminals
Why?
Will it be supported in the near future ?
pacome wrote:
I wanted to build a shared DLL.
The problem occurs when an input Control is a dynamic dispatch terminal.
"Now that's a horse of a different color!" (Caby, Wizard of Oz, Emerald City Scene).
Yes the DLL spec never knew about dynamic dispatching.
Your best option is to wrap the LVOOP stuff up in wrappers and expose the wrappers.
I'm curious if others have ideas as well.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction
Similar Messages
-
I have started to use ICal and yesterday started to receive a message "The Anniversary valendar does not support events". I have searched my calendar events and cannot find any event associated with the anniversary calendar. I have turned off the anniversary calendar and deleted fro my calendar and the message still occurs. The MacBook Pro that I sync does not have this message. Even when ICal is turned off the message still occurs. Any ideas?
I have started to use ICal and yesterday started to receive a message "The Anniversary valendar does not support events". I have searched my calendar events and cannot find any event associated with the anniversary calendar. I have turned off the anniversary calendar and deleted fro my calendar and the message still occurs. The MacBook Pro that I sync does not have this message. Even when ICal is turned off the message still occurs. Any ideas?
-
The extraction program does not support object 0JOB_ATTR
HI all,
I'm getting the following error when execting 0JOB_ATTR extractor in R/3 system (via RSA3):
The extraction program does not support object 0JOB_ATTR
Message no. R3009
Diagnosis
The application program for the extraction of data was called up using the invalid InfoSource/invalid InfoObject 0JOB_ATTR.
System Response
The data extraction is terminated.
Procedure
Check the SAP Support Portal for the appropriate Notes and create a customer message if necessary.
I've found various threads with this error (or similar ones), but none of them are solved (or not published solution). Haven't found any SAP notes yet either, so any input would be very helpfull.
Thank you.
G.0JOB_ATTR not in use and SAP replaced this with 0EC_CJOB_ATTR... U have to use 0EC_CJOB_ATTR to load master data for 0JOB.
Even i faced the same problem and found the following info in one of the SDN thread, and we are using 0EC_CJOB_ATTR (make sure u have data in table HRP5050).
I have sent a message to SAP asking for the solution . Below is the reply what they gave.
"This error appears because of naming conventions we have to switch the name of the Data Source from 0JOB_ATTR to 0EC_CJOB_ATTR. Please use this data source to extract the compensation job attributes to BW.
Note also that data source 0EC_CJOB_ATTR extracts data from table HRP5050.
If no data is being extracted please do the following:
If you have data in HRP5050 and still do not get any data please try the following :
1) Take over the Data Source from the business content (RSA5)again and check in RSA3 .
2) Replicate the Data Source to BW
3) Activate the Info Source again.
4) Delete any previous delta initializations for the datasource.
5) Initialize the delta again
6) Try to load data". -
The Report Designer does not support this query drill down colum
Iam working On BI7 When iam doing report desingner when iam opening query through data provider
Iam getting thsi error The Report Designer does not support this query drill down colum colum axis may contain one structure only remove additional dimensions
I modify the cube and i remove some dimensions also My problem is when iam putting characterstics in Colums Iam getting this error When iam removing that charcterstics from colums it was not throuing any error
Chaitanyahi,
report designer is for front end view design and the designcan be done with restriction to navigation.
you have dynamic and static report designs with restricted navigations.
chk the links for document
http://help.sap.com/saphelp_nw04s/helpdata/en/dd/cea14119eb9f09e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/17/16d941de405f24e10000000a1550b0/frameset.htm
Ramesh -
Encryption is required to connect to this server but the client library does not support encryption
Hi ,guys
I came cross a trouble when I configured connection encryption.
I met the following problem when I have configured connection encryption done.
Encryption is required to connect to this server but the client library does not support encryption; the connection has been closed. Please upgrade your client library. [client: ip]
environment info:
SQL:SQL2008 \SQL2005\SQL2008R2
SERVER:WIN2003 \WIN2008R2
We use C# to develop asp.net webform app, so the provider I use should be SQL client.
client .NET Framework version:NET Framework 3.5
Pls tell me why I met this weird problem.
Thanks in advance.
Love SQLSure,here is the connetion string of java app.
jdbc
db.url=jdbc:jtds:sqlserver://60.x.x.x./TaskSiteInfo
db.username=xxx
db.pwd=xxx
Your initial post stated you were using SqlClient in an ASP.NET 3.5 app. I think this is an issue with the jTDS client based on the error message. Are you using the latest jTDS driver? If so, try posting this issue to
http://sourceforge.net/p/jtds/discussion/
Dan Guzman, SQL Server MVP, http://www.dbdelta.com -
The extraction program does not support object 0MATERIAL
Hi All,
can you please help me with the issue that we have for some of our Master data load.
Full Loads are working fine, Delta Init is working fine as well. but Delta load is not the error is "The extraction program does not support object 0MATERIAL"
already tried looking for some OSS note but none of them helps.
hope anyone can help me.
Thanks in advance,
AldenHi Christopher,
Below is the reply that I got from SAP Consultant:
I assume that this issue was happened after upgrade
which is already mentioned in the consulting notes 1165059 & 1251433:
-> 1165059 ALE: Generating and reading change pointers after Upgrade
-> 1251433 SAPI: Creating and reading change pointers after Upgrade
Can you have a look at these consulting notes to get more information
in details about ALE changing and follow my recommended steps to solve
this problem please:
1. Can you check this affected datasource in table ROOSGEN in source
system and you will find the generated Message Type in MSGTYP:
->Tx. se16 ROOSGEN:
OLTPSOURCE SLOGSYS RLOGSYS MSGTYP ->???
2. Then you can check this Message Type (RS*) in table TBDA2 and you
will see that the flag (BDCP2_ACT) is missing here in table TBDA2 :
->Tx. se16 ->TBDA2:
MESTYP ACTIVE BDCP2_ACT
RS* X (empty!)
3. If the flage (BDCP2_ACT) is missing here in table TBDA2:
Then you have to do the following steps:
->start transaction SALE:
Modelling and Implementing Business Processes
Master Data Distribution
Replication of Modified Data
Activate Change Pointers for Message Type
-> select the affected generated Message Type
-> RS* ->deavivate and activate again
Afterwards the missing flag should be set correct in TBDA2 again.
Please check it first and then you can start the delta upload in
your BW system side again. The data load should work correct now.
After carrying out the above steps we were able to re initialize the master data.
Regards and Thanks,
Vivek -
The extraction program does not support object 0MAT_PLANT
Pessoal alguém já passou por este problema?
Estou tentando fazer um delta no objeto 0MAT_PLANT, mas me retorna sempre este erro.
Já fiz um novo Init, mas o erro continua.
The extraction program does not support object 0MAT_PLANT
Message no. R3009
Diagnosis
The application program for the extraction of data was called up using the invalid InfoSource/invalid InfoObject 0MAT_PLANT.
System Response
The data extraction is terminated.
Procedure
Check the SAP Support Portal for the appropriate Notes and create a customer message if necessary.Hi Eduard ,
You can try the following steps to solve that
1. Delete the previous Delta Init for the InfoObject
If you have access to R/3 Side you can follow the steps or you can follow the BW Steps
Goto RSA7 ->Select and Delete the Init Request for the InfoObject
From BW Side
InfoPackage-> Inti for Source System -> Select & Delete
the Init Request
2. Execute the Init InfoPackage for the InfoPackage again.
3. After successful completion, execute the delta InfoPackage.
Hope it solves your problem, if not pls let me know.
Thanks & Regards,
Chandran Ganesan
SAP Business Intelligence -
The extraction program does not support object 6BEREC_REP_CH_PERFORMANCE1
Hai friends,
I am pulling data from Oracle database to BW through UDConnect. When I check in RSA3 for the datasource 6BEREC_REP_CH_PERFORMANCE1, I get the following error:
"The extraction program does not support object 6BEREC_REP_CH_PERFORMANCE1"
What does it mean? Kindly help.
Regards,
Neha SolankiHi,
It's not Absolute version. It's obsolete version(means No more)
This will help you:----
The extraction program does not support object 0JOB_ATTR
Regards,
Suman -
The extraction program does not support object ZTD_AW_17
Hi friends,
When doing extraction I am getting the below error.Please
see the below extract of system response.
"The extraction program does not support object ZTD_AW_17
Message no. R3 009
Diagnosis
The application program for the extraction of data was called up using the invalid InfoSource/invalid InfoObject ZTD_AW_17.
System Response
The data extraction is terminated."
Please help me out.
thanks
VenkatHi Venkat,
Have you checked to see if the ZTD_AW_17 infoobject is in your system and active? If not, transport the object from your D system to the P system. Also check the infosource to see if it is active and if the ZTD_AW_17 infoobject is there. If so reactivate the transfer rules and run the extraction again.
Aaron -
The extraction program does not support object
I was loading data from R/3 to BW through a Generic Data source. Previously it was loaded successfully but when I loaded last time, there was an error
"The extraction program does not support object <Data Source Name>"
Can somebody help me out please?Hi,
Please check this.
Loading Problem
Regards. -
The update map does not support "UPDATE"
Hi,
I've created a Logical Data Service, but get a warning
The update map does not support "UPDATE" : One or more update operations do not have update capabilities
While creating the Physical Services(Oracle 11g), the update methos was not creating; so I create those manually.
The update does not work, even from the Physcial service( It says Operation Successful) but the data does not change
Any help is appreciated
Rgds,
IsPlease post your physical data service both before and after you added the update.
-
Error message: "The Birthdays calendar does not support events."
Error message: "The Birthdays calendar does not support events." pops up 100 times..probably as many times as I have birthdays in my contacts....very irritating...
Well mother of christmas Apple, what the **** is this?! Please help us get this off the screen
-
Revision: 11541
Author: [email protected]
Date: 2009-11-06 14:29:41 -0800 (Fri, 06 Nov 2009)
Log Message:
Fix the textLayout build number that is set in the main build.xml to match what will be set when the build machine does NOT do the build
QE notes: no
Doc notes: no
Bugs: no
Reviewer:
Tests run: checkintests
Is noteworthy for integration: no
Modified Paths:
flex/sdk/trunk/frameworks/air-config.xml
flex/sdk/trunk/frameworks/flex-config.xmlThats good news.
-
i am experiencing error while downloading Photoshop. It says that the operating system does not support photoshop
Since you have not provided any actual system info not told us what version of Photoshop, we can't really know what is going on.
Mylenium -
Why the iPod Touch does not support GPS Bluetooth Reciever
Why the iPod Touch does not support Bluetooth GPS.
I had to make a jailbreak justto install and use roqyBT a Bluetooth GPS receiver,
This aplication run witch these software:
TomTom
Navigon
iGO
Maps
Google Earth
Around me
And run wich several receives as iBT 747, QSTARZ Q-1000, Holux M-1000 and my Nokia LD-3W.
But I didn´t like to use Jailbreak, I only make the jailbreak to use a GPS bluetooth.Ipod touch supports bluetooth for stereo headsets/speakers and some peer to peer apps from the app store.
Why is not a question that can be answered here.
Only Apple would know.
Maybe you are looking for
-
Data view web part to display the most frequently accessed pages based on the user that is logged in
I am working on a project in which I would like to display the top 5 most accessed pieces of content as links, based on the user that is logged in. Our MOSS 2007 implementation has subsites for all regions that we do business in, as an example North,
-
Hi Guys, I would like your suggestion on the following situation I want to try, currently we have a database on a web-sever to deliver content, add members and created pages for the CRM functions for our sales staff. We have specific requirements for
-
Adding New Field and Passing Values Between Screens
In the Oracle Projects Create Project screen, I've been asked to add a new LOV for Organization (LOV copied from a subsequent page) - and then pass the selected value to the next page and default in the value based on the selection on the first page.
-
Continuing issues with two podcasts...
I am back to having issues with posts not being visible in iTunes... The feeds are: feeds.feedburner.com/SosChurchStockholm and feeds,feedbruner.com/JohannesAmritzersPodcast And they do not validate when trying to verify them through feedvalidator.or
-
Status issues with sales process
Hi Friends, I have an issue with thrid party sales order processing Step#1 My client runs the sales order for Material Qty p-100 10 p-101 10 p-102 10 step-2 Purchase requisition created and from vendor delivery happened Step-3 My user created billing