The client cannot connect to the server

we just installed the boe but found that the client cannot connect to the server.
server: windows server 2008
boe xi3
client: window xp sp3
the server and client are in same dns
all components are work in server but client.
any idea on this?
ps: i can ping the server name successful.
thanks
ada
Edited by: Ada_Wei on Oct 29, 2010 10:12 AM

Can you please try to stop and disable the Windows firewall service on your client machine?
WHich client do you use and which error message do you get exactly?
Regards,
Stratos

Similar Messages

New-Pssession client cannot connect to the destination specified

I've used the following cmdlets to connect powershell to our tenant for months and now I cannot open a possession with the same commands.
I've searched on some of the error text show below without any great progress. We have a pair of Hybrid servers and we get the same result on either.
Any suggestions are appreciated.
Bruce
Import-module msonline
$O365Cred = Get-Credential
$O365Session = New-PSSession –ConfigurationName Microsoft.Exchange -ConnectionUri https://ps.outlook.com/powershell -Credential $O365Cred -Authentication Basic -AllowRedirection
Import-PSSession $O365Session
Connect-MsolService –Credential $O365Cred
[email protected]
working password at the MicrosoftOnline Portal
$O365Session = New-PSSession -ConfigurationName Microsoft.Exchange -ConnectionUri https://ps.outlook.com/powershell -Credential $O365Cred -Authentication Basic –AllowRedirection
WARNING: Your connection has been redirected to the following URI:
https://pod51038psh.outlook.com/powershell-liveid?PSVersion=4.0
New-PSSession : [pod51038psh.outlook.com] Connecting to remote server pod51038psh.outlook.com failed with the following error message : The client cannot connect to the destination specified
in the request. Verify that the service on the destination is running and is accepting requests. Consult the logs and documentation for the WS-Management service running on the destination, most commonly IIS or WinRM. If the destination is the WinRM service,
run the following command on the destination to analyze and configure the WinRM service: "winrm quickconfig". For more information, see the about_Remote_Troubleshooting Help topic.
+ $O365Session = New-PSSession -ConfigurationName Microsoft.Exchange -ConnectionUr ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo          : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [New-PSSession], PSRemotingTransportException + FullyQualifiedErrorId : CannotConnect,PSSessionOpenFailed
Import-PSSession $O365Session
Import-PSSession : Cannot validate argument on parameter 'Session'. The argument is null. Provide a valid value for the argument, and then try running the command again.
At line:1 char:18
+ Import-PSSession $O365Session
+
~~~~~~~~~~~~
+ CategoryInfo
: InvalidData: (:) [Import-PSSession], ParameterBindingValidationException
+ FullyQualifiedErrorId : ParameterArgumentValidationError,Microsoft.PowerShell.Commands.ImportPSSessionCommand
Connect-MsolService -Credential $O365Cred

You are using the outdated URI string, which is known to cause problems. Should be: https://outlook.office365.com/powershell-liveid/
Just follow the instructions in the TechNet article:
https://technet.microsoft.com/en-us/library/jj984289(v=exchg.150).aspx

BPC Excel: The system cannot connect to the server. There might be network

Hi Guys,
I get the following error when i try to connect to BPC Excel: The system cannot connect to the server. There might be network or security issue.
This only happen on clients machines, I have installed the client tools on the server and tested, i can connect to Excel but not on the machine. My MS office version is the same as the one on the server. BPC is ver 5.04
Has anyone experienced the same problem.
your help will be greatly appreciated.

Let me summarize your issue to see if I may help. If I cannot, then you will need to work with SAP Support on the connection problem.
- You have a single or multi-server setup?
- Installed using BPC 5.1 SP3, (or 5.0.502) correct?
- You can enter the BPC on the server, both via BPC Excel and BPC Admin?
- When you initiate BPC Admin on your client, so can connect to the Server and perform Admin operations?
- When you initiate BPC for Excel, and walk through the connection wizard, you cannot connect to the server?
- When you are in the Connection Wizard, are you using a path or a Server designation?
- Is the system on a single domain?
- When you added users to the Admin Security profile, they were selected from a DOMAIN?
- You have processed security and assigned ALL TASKS currently and processed the MEMBER ACCESS profiles, yes?
After all of this, have you uninstalled 1 BPC client, cleared the ProgramFiles/BPC folder, and deleted the local stored BPC information? If you haven't, just for simplification, I would attempt this process.
You also hae read all the SAP Support Notes regarding using Excel2007 with BPC and the issues you may experience?
Please let me know and maybe we can help.

Can't save BISM file pointing to excel sheet (data source). ErrMsg: "There were errors found while validating the page: Cannot connect to the server or database."

Hi,
Me and a collegue is administrering our new enterprise BI portal in SharePoint 2013 (On Premise) and have a problem with using a specific Excel file including general ledger data as data source through a BISM file.
This particular BISM file can't be saved without getting the error message "There were errors found while validating the page: Cannot connect to the server or database."
BISM files against other Excel sheets and sources (for example SSAS tabular databases) works well.
Can anyone help us pinpointing whats wrong here, this is a really important stakeholder in our organization requesting this reporting?
Cheers!

Hi E.SWARD ,
My self created a Power pivot excel then i want to use this excel to create BI file . Still i am getting the same error . Pls help me to resolve this issue
Cannot connect to the server or database.
I am getting the similar error , if i use Tabular analysis server instance .
Subhash

The system cannot connect to the Application Server

Hello Everybody,
I have a problem when connecting to my BPC Application.
I get the following error when trying to open BPC:
"The system cannot connect to the (http://xxxxxx) Application Server. Verify that you have specified a valid Application server name, or see if the application server is unavailable at this time."
We have to reboot the application server to have acces again to the application.
The osoft website was also unavailable.
The server diagnosotic was OK.
And when consulting the tblLogs table I found this message:
==============[System Error Tracing]==============
[System Name] : ApplicationService [Message Type] : ErrorMessage [Job Name]     : OSoft.Services.Webservice.ApplicationService.ApplicationService.Query() [DateTime]     : 1/3/2011 4:27:35 PM [UserId]       : GROUPE\Deshors [Exception]       DetailMsg : {System.NullReferenceException: Object variable or With block variable not set.     at Microsoft.VisualBasic.CompilerServices.Symbols.Container.InvokeMethod(Method TargetProcedure, Object[] Arguments, Boolean[] CopyBack, BindingFlags Flags)     at Microsoft.VisualBasic.CompilerServices.NewLateBinding.LateGet(Object Instance, Type Type, String MemberName, Object[] Arguments, String[] ArgumentNames, Type[] TypeArguments, Boolean[] CopyBack)     at OSoft.Services.Webservice.ApplicationService.ApplicationService.ValidateUser()     at OSoft.Services.Webservice.ApplicationService.ApplicationService.Query(String strQueryType, String strParameter, String strContext, String strSecurity)}
==============[System Error Tracing End ]==============
==============[System Error Tracing]==============
    [System Name] : Configuration [Message Type] : ErrorMessage [Job Name]     : ServerDefault.GetValue [DateTime]     : 1/3/2011 4:40:08 PM [UserId]       :   [Exception]       DetailMsg : {System.Exception: Cannot create ActiveX component.     at Microsoft.VisualBasic.Interaction.CreateObject(String ProgId, String ServerName)     at OSoft.Services.Application.Configuration.ServerDefault.GetValue(String strKeyId)}
==============[System Error Tracing End ]==============
Any help?
Thank you in advance.

Hi expert,
Unfortunately, we still encounter the issue !!
We get Unhandled exceptions in the W3WP.EXE process, but the IIS logs do not show anything wrong.
Here is the Windows event warning message we get :
Event code: 3005
Event message: An unhandled exception has occurred.
Event time: 1/31/2011 11:43:11 AM
Event time (UTC): 1/31/2011 10:43:11 AM
Event ID: 0295c38777734029a3cec37ec035fa45
Event sequence: 8
Event occurrence: 1
Event detail code: 0
Application information:
    Application domain: /LM/W3SVC/1/ROOT/OSoft-1-129409441580590866
    Trust level: Full
    Application Virtual Path: /OSoft
    Application Path: C:\PC_MS\Websrvr\Web\
    *Machine name: **************
Process information:
    Process ID: 4323
    Process name: w3wp.exe
    Account name: NT AUTHORITY\NETWORK SERVICE
Exception information:
    Exception type: Exception
    Exception message: Invalid UserID
Request information:
    Request URL: http://localhost/Osoft/Launch.aspx
    Request path: /Osoft/Launch.aspx
    User host address: ::1
    User:*******\Administrator
    Is authenticated: True
    Authentication Type: Negotiate
    Thread account name: NT AUTHORITY\NETWORK SERVICE
Thread information:
    Thread ID: 12
    Thread account name: NT AUTHORITY\NETWORK SERVICE
    Is impersonating: False
    Stack trace:    at Microsoft.VisualBasic.CompilerServices.Symbols.Container.InvokeMethod(Method TargetProcedure, Object[] Arguments, Boolean[] CopyBack, BindingFlags Flags)
   at Microsoft.VisualBasic.CompilerServices.NewLateBinding.LateGet(Object Instance, Type Type, String MemberName, Object[] Arguments, String[] ArgumentNames, Type[] TypeArguments, Boolean[] CopyBack)
   at OSoft.Consumers.ZFP.WebBase.Utility.GetLastUserApp(CPMUser& mUser, String strAppServerURL, String strSecurity, String strContext, Boolean bServerPathReset)
   at OSoft.Consumers.ZFP.WebBase.PageBase.Page_Init(Object sender, EventArgs e)
   at System.EventHandler.Invoke(Object sender, EventArgs e)
   at System.Web.UI.Control.OnInit(EventArgs e)
   at System.Web.UI.Page.OnInit(EventArgs e)
   at OSoft.Consumers.ZFP.WebBase.PageBase.OnInit(EventArgs e)
   at System.Web.UI.Control.InitRecursive(Control namingContainer)
   at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
Thanks in advance for your help
Lionel

The system cannot connect to the server

Hi Experts,
when I set BPC for Excel connection by connection wizard, I can connect to server and get application set list, but when I login application set, the system show me the message("The system cannot connect to the server"), and log off! how can I fix this problem? is it a firewall issue?
best regards
evans

Hi,
Can you compare your macro setting (Security level )compare to the system in which BPC is working. Or try as follows:
1. Unistall BPC
2. Restart system
3.Install BPC
hope it works...
regards,
Raju

8.8 Client cannot connect to Windows Server 2008 error -1102

SAP Business On 8.8 on PL 18
This is not the first time I have had this issue with Windows Server 2008.
however everytime the resolution was diffrent. Now this site is causing trouble.
The issue is the client cannot connect. We have the log on window, can see the company list. type on the password and we get a -1102 error.
The client on the Server itself can log on. It is the cleints that cannot.
I checked these below.
1 SQL Native client is installed and ok.
2. Licence server is configured and ok
3. The user has admin access to locl PC
4. The SAP user name and password are correct ( client on server can connect fine )
5. The ports 1433, 30000 and 30001 are open on the server.
6. Through SQL server configuration the named pipes and TCP are enabled.
7. SQL server browser is running
The only things I have not tried are
The Firewall is running on the server and I have not yet stopped it. Will try that tomorrow.
Do you have any other ideas please ?

I have got this working but I am not confidant of the outcome - yet - I really need your expert advise here.
This is what I did. In that order.
1.     As Owen suggested I checked if there was a specified Port for the instance. What I found was TCP Dynamic ports were enabled ( SQL server config manager | network configuration | tcp properties ) and there was no TCP port specified. Assuming ( ai may be wrong) that the system assigns a dynamic port to this instance I set it up so the Dynamic port does not happen and manually specified the Port 1433. Restarted the SQL Service. ( still having the Port 1433 open in the firewall). This did not solve the issue.
2.     With the above setting still on, switched off the firewall. Went to the PC client and SAP can log on now. Now keeping the SAP client running, switched on the Firewall on the server. Log off SAP on PC client and log back in ( with firewall off ). SAP now can log on.
3.     I had to do the above step for all PCs to get them working.
4. Currently the firewall is on and clients can connect
So what could be happening? I have no clue. It is apparent there is some setting that gets saved within the PCs ( may be user profile) after the first log on with the Firewall off - to say its safe ?
However I have no idea what will happen if the server is restarted u2013 this server we cannot restart any time we want as itu2019s a critical server and runs other things.
I would still like to get to the bottom of this to understand what is happening.
I have a SAP message running too and will ask them this same question.

Exception Message: The form cannot connect to the data source. Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'

When opening a form in SharePoint 12013 that was created from Infopath 2013, I get the following error.
You do not have permissions to access a database that contains data required for this form to function correctly.
An entry has been added to the Windows event log of the server.
Log ID:5566
When I go to the log files on the SharePoint server. I see the following error.
Exception Message: The form cannot connect to the data source. Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'
I am guessing this has something to do with the UDCX connection and the database.
Can anyone help me get this fixed?

Hi Jim,
Please check the following kb article when it occurs 5566errro with the UDCX conection file, try the method of using the Secure Store Service to store alternate credentials for the data connection method, or the method of stating the credentials
in the UDC file explicitly.
Also check if it could help with setting sql server as "SQL Server and Windows Authentication mode".
http://support.microsoft.com/kb/981684
Thanks
Daniel Yang
TechNet Community Support

TS1368 Has anyone found this article useful? Any other suggestions to resolve the error, "cannot connect to the itunes store" ?

Any other suggestions to resolve the error, "cannot connect to the itunes store" ?

Hi paul.labiche,
When having iTunes Store connectivity issues, the following articles provide the best solutions:
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Thanks,
Matt M.

HT4356 I am trying to print wirelessly from my ipad to an epson stylus SX438W. The connection appears fine on both devices but the ipad cannot connect to the printer. It has been working fine for the past 4 months. Can anyone help?

I am trying to print wirelessly from my ipad to an epson stylus SX438W. The connection appears fine on both devices but the ipad cannot connect to the printer. It has been working fine for the past 4 months. Can anyone help?

Have you tried restarting the printer? Reboot the iPad as well.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

When I try to do anything with the App store I get the message "Cannot connect to the iTunes Store". I have internet connections and I have tried resetting the password.

I cannot connect to the iTunes store for any purpose. When I try I get the message: "Cannot connect to the iTunes Store". That is all. I have tried a lot of different things except , obviously, the correct thing.

HI ...
Try this support article > Can't connect to the iTunes Store

External Clients cannot connect to Exchange Server

Hello all:
My external clients using outlook cannot connect to Exchange Server 2013. We have on-presmise version updated to Cu3 and after the Cu3 update we lost connectivity with Outlook clients. Many of the settings in IIS were changed after the Cu3 update,
I noticed after my http->https redirect was not applied anymore to the default website. Here is my Get-OutlookAnywhere results:
RunspaceId : 6379fab1-f692-484f-8118-99e48330d4c4
ServerName : EXCHSERV
SSLOffloading : True
ExternalHostname : mail.domain.com
InternalHostname : mail.domain.com
ExternalClientAuthenticationMethod : Negotiate
InternalClientAuthenticationMethod : Ntlm
IISAuthenticationMethods : {Basic}
XropUrl :
ExternalClientsRequireSsl : True
InternalClientsRequireSsl : True
MetabasePath : IIS://EXCHSERV.domain.com/W3SVC/1/ROOT/Rpc
Path : D:\Program Files\Microsoft\Exchange Server\V15\FrontEnd\HttpProxy\rpc
ExtendedProtectionTokenChecking : None
ExtendedProtectionFlags : {}
ExtendedProtectionSPNList : {}
AdminDisplayVersion : Version 15.0 (Build 775.38)
Server : EXCHSERV
AdminDisplayName :
ExchangeVersion : 0.20 (15.0.0.0)
Name : Rpc (Default Web Site)
DistinguishedName : CN=Rpc (Default Web
Site),CN=HTTP,CN=Protocols,CN=EXCHSERV,CN=Servers,CN=Exchange Administrative
Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=domain,CN=Microsoft
Exchange,CN=Services,CN=Configuration,DC=domain,DC=com
Identity : EXCHSERV\Rpc (Default Web Site)
Guid : 596ed7a1-ceec-4a36-9cbc-617ac5214463
ObjectCategory : domain.com/Configuration/Schema/ms-Exch-Rpc-Http-Virtual-Directory
ObjectClass : {top, msExchVirtualDirectory, msExchRpcHttpVirtualDirectory}
WhenChanged : 12/23/2013 2:20:41 AM
WhenCreated : 11/25/2013 2:51:36 PM
WhenChangedUTC : 12/23/2013 7:20:41 AM
WhenCreatedUTC : 11/25/2013 7:51:36 PM
OrganizationId :
OriginatingServer : DOMAINCONTROLLER.domain.com
IsValid : True
ObjectState : Changed
Thanks in advance

Hi,
According to your description, users cannot connect to Exchange server 2013 both internal and external.
Please run Test E-mail AutoConfiguration in Outlook to check your autodiscover service. Also
reset your Exchange virtual directory to connect correctly. If the issue still continues after all configurations are setting properly, collect some Event logs would be helpful.
If there is any question, please post the results here for further analysis.
Thanks,
Winnie Liang
TechNet Community Support

Macbook clients cannot connect to Windows Server 2008 RRAS with L2TP/IPSec

Hi everyone,
I had installed "Remote and Routing Access" or a VPN server on Windows Server 2008. The connection type set up is L2TP/IPSec. All the Windows clients can connect to the L2TP/IPSec VPN server without problem but Macbook users are facing problem.
The Macbook users got the error message "The L2TP-VPN server did not respond. Try reconnecting. If the problem continues, verify your settings and contact your Administrator."
I think it is something related to the pre-shared key encryption but I am not sure. The Macbook users could connect if the connection type is changed to PPTP on server and clients side. I searched for similar problems and solutions online but no luck, I couldn't find solution that helps. I found this is a common problem faced by many macbook users.
Does anyone have a solution or suggestion for this, please? I appreciate all the helps and suggestion given.
Thanks,
CK

Hi,
Thanks for the question, however, this forum is for Remote Desktop Clients related questions.
Regarding the issue, as Windows clients can connect with no problem, I suspect that it is a Mac side issue and I would like to suggest you contact Apple support for help.
Thanks.
Jeremy Wu
TechNet Community Support

2 of 3 computers connected to the airport cannot connect to the internet

I have an airport extreme that is connected to the cable modem, and is set to distribute IP addresses using a single 10.0.1.1 etc.
All three computers, a ppc mac mini, a 12" powerbook, and the intel iMac are connected to the base station, and that is their only connection. the pb and the mini cannot access the internet through the airport, but they are assigned IP addresses, 10.0.1.2 and 10.0.1.3.
the intel mac has more info displayed than the airport, a real IP address, 216.195.... a different subnet, and a router #.
I am afraid to change the settings that I might lose the connection to online support on the intel mac, but am totally confused as to why it would have a different IP address than it is told to have by the aebs. I need to get all these computers online today.
I am also trying to connect a new epson aculaser cx11nf printer through the ethernet port in the aebs, and it is not acknowledging anything in the port. but that's another story, and i'll likely call epson for help later, but just in case someone thinks it's related.
Thanks in advance.

Mary, Welcome to the discussion area!
From the information your provided, it is clear that your Intel Mac is not connected to your AirPort Extreme base station (AEBS). It is connected to a neighbor's wireless network.
On the Intel Mac, go to the AirPort menu and select the name of your wireless network. Hopefully you gave the network a unique name.
Ensure that you have the cable modem connected to the AEBS's WAN port.
Power off the cable modem whenever you switch the Ethernet connection. This causes the cable modem to forget the device it was talking to. When the cable modem is turned back on, it will find the new device to talk to.

Where is the "I cannot connect to the Internet" button?

Apparently, according to this page here you should be able to maually activate on a compnuter that can't connect to the internet? Where do you do so on InDesign CS6?

So just for fun I decided to see what would happen if I shut down my network card and tried an install. Turns out I was able to force the links to appear. Here's how I did it:
Installed Production Premium as trial.
Disabled my network adapter.
Ran the Installer again, it accepted my License Key, completed.
Launched Photoshop
Got a message that Internet was required for activation with a link "Having trouble connecting to the Internet?"
Clicked that link and got a second page for with the "This Computer cannot connect to the Internet" link
Lead to a third page with an Offline Activation button
This generated the request code, which I was able to use to get a response code and successfully activate Production Premium.
I attempted the same process to install Indesign and unfortunately no matter how many times I attempted it each time I got a message that the response code was invalid. So half way there with some of my upgrades.
It seems the key is to shut down the network altogether. If the activator detecs any kind of connection, it won;t give you the offline prompts. Hope this helps some others.
Adobe: please explain why you do not document this, but make bone-headed reccomendations like "disable the authentication proxy"? (like anyone working behind an authentication proxy has the authority to disable it!) Why did I spend an hour with a tech support rep digging around my system, when I clearly stated upfront that your tools could not navigate our security and that our security was absolute, inflexible and would not change? The rep should have told me in the first minute of the chat that I need to completely disable my network connection and install again.
I mean seriously this is four days invested in just trying to install legally licensed software and I am not done yet as InDesign hasn't activated yet.

The client cannot connect to the server

Similar Messages

Maybe you are looking for