The configured database is not a compatible database

Hi, i am experiencing some problems getting our zen servers to carry out
reporting, auditing, etc etc.
Running :
Netware 6.5 sp5
Zenworks Desktops managment 6.5sp1
When i attempt to carry out a report or click on the zenworks inventory
databse object within Console1 - the following error appears:
"the configured database is not a compatible database"
I have checked the Tids below but the settings have not changed:
http://support.novell.com/docs/Tids/.../10097366.html
and (even though this applies to zenworks 7)
http://www.novell.com/documentation/...a/aic80cg.html
I do not know what else to do.
Any assistance on this would be greatly appreciated.
regards
Dennis
IT Support

Dennis,
>
>Hi, i tried something along the lines of your advice, i used the console1
>from the server hosting the zenworks inventory server.
>
>I copied this to my local pc as this would be alot more quicker...and when
>i tried the Inventory reporting ...IT WORKED!!!!
>Resolved the issue of receiving the error message
>"The configured database is not a compatible database"
Nice.
I have seen that happen before and it was caused by Snapin versions. The
error message is a bit bogus. But if you are not seeing issues on the asa
screen of the server, then it's likely not the servers problem, but c1's
problem.
Jared Jennings - Data Technique, Inc.
Novell Support Forums Sysop
My Blog and Wiki with Tips, Tricks, and Tutorials
http://jaredjennings.org

Similar Messages

SharePoint 2007:Cannot connect to the configuration database.

The share point 2007 server under Windows Server 2008 R2 runs well formerly, but suddenly the user can't visit the site with error on page:
Cannot connect to the configuration database.
I also checked windows log with bellow main errors：
Log Name:      Application
Source:        Office Server Search
Date:          2015/2/28 22:30:47
Event ID:      10034
Task Category: Gatherer
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      ***
Description:
Could not access the Search service configuration database.
Context: Application 'b9f7f366-4027-4923-b5ce-b93c132df7c3'
Details:
Unspecified error
(0x80004005)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Office Server Search" />
    <EventID Qualifiers="49152">10034</EventID>
    <Level>2</Level>
    <Task>3</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2015-02-28T14:30:47.000000000Z" />
    <EventRecordID>2323514</EventRecordID>
    <Channel>Application</Channel>
    <Computer>***</Computer>
    <Security />
</System>
<EventData>
    <Data>
Context: Application 'b9f7f366-4027-4923-b5ce-b93c132df7c3'
Details:
Unspecified error
(0x80004005)</Data>
</EventData>
</Event>
======================================
Log Name:      Application
Log Name:      Application
Source:        Windows SharePoint Services 3
Date:          2015/2/28 22:30:50
Event ID:      5586
Task Category: Database
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      ***
Description:
Unknown SQL Exception 64 occured. Additional error information from SQL Server is included below.
A connection was successfully established with the server, but then an error occurred during the login process. (provider: TCP Provider, error: 0 - The specified network name is no longer available.)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Windows SharePoint Services 3" />
    <EventID Qualifiers="0">5586</EventID>
    <Level>2</Level>
    <Task>484</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2015-02-28T14:30:50.000000000Z" />
    <EventRecordID>2323517</EventRecordID>
    <Channel>Application</Channel>
    <Computer>***</Computer>
    <Security />
</System>
<EventData>
    <Data>64</Data>
    <Data>A connection was successfully established with the server, but then an error occurred during the login process. (provider: TCP Provider, error: 0 - The specified network name is no longer available.)</Data>
</EventData>
</Event>
==================================================
Source:        Windows SharePoint Services 3
Date:          2015/2/28 22:31:00
Event ID:      27745
Task Category: General
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      ***
Description:
The description for Event ID 27745 from source Windows SharePoint Services 3 cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on
the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
#50071: Unable to connect to the database SP_Config on ***. Check the database connection information and make sure that the database server is running.
the message resource is present but the message is not found in the string/message table
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Windows SharePoint Services 3" />
    <EventID Qualifiers="14130">27745</EventID>
    <Level>2</Level>
    <Task>1105</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2015-02-28T14:31:00.000000000Z" />
    <EventRecordID>2323520</EventRecordID>
    <Channel>Application</Channel>
    <Computer>***</Computer>
    <Security />
</System>
<EventData>
    <Data>#50071: Unable to connect to the database SP_Config on ***. Check the database connection information and make sure that the database server is running.</Data>
</EventData>
</Event>
Please kindly support to find the root cause and guide how to fix it ASAP.
Many appreciations for your hellp in advance!
Note:
1)As checked, SQL server service is running well;
2)Web server log under the path C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\12\LOGS with bellow errors:
03/02/2015 11:25:53.28 mssearch.exe (0x0F0C)                   0x08FC Search Server Common
GathererSql                   0 Monitorable CSqlCrawl::ExecuteCommand() Failed in GetSession, Error is 0x80004005 - File:d:\office\source\search\search\gather\server\gatherobj.cxx
Line:9654
03/02/2015 11:25:53.39 mssearch.exe (0x0F0C)                   0x08FC Search Server Common          Common
0 Monitorable Application b9f7f366-4027-4923-b5ce-b93c132df7c3, resource 1: pIDBInitialize->Initialize error. Failed to create a non fast load session. - File:d:\office\source\search\search\searchdll\resourcemanagerimpl.cpp Line:608
03/02/2015 11:25:53.39 mssearch.exe (0x0F0C)                   0x08FC Search Server Common          Common
0 Monitorable CResourceManager::CreateSession Error creating non fastload session 'Provider=SQLOLEDB;Extended Properties='Server=***;Database=SP_SharedServices_Search;Trusted_Connection=yes;App=Windows SharePoint Services;Timeout=15';'. - File:d:\office\source\search\search\searchdll\resourcemanagerimpl.cpp
Line:658
03/02/2015 11:25:53.39 mssearch.exe (0x0F0C)                   0x08FC Search Server Common          UtilCommon
0 Monitorable Dumping error record [0]:   Source: Microsoft OLE DB Provider for SQL Server   HRESULT: 0x80004005   Code: 11   Description: [DBNETLIB][ConnectionRead (recv()).]General network error. Check
your network documentation. - File:d:\office\source\search\common\pkmutild\atldbext.cxx Line:1250
03/02/2015 11:25:53.39 mssearch.exe (0x0F0C)                   0x08FC Search Server Common          GathererSql
0 Monitorable CSqlCrawl::ExecuteCommand() Failed in GetSession, Error is 0x80004005 - File:d:\office\source\search\search\gather\server\gatherobj.cxx Line:9654

Hi,
In this forum we mainly discuss questions and feedbacks about Office products, since your question is about SharePoint, I suggest you post the question in SharePoint forum to get further assistance:
https://social.technet.microsoft.com/Forums/office/en-US/home?category=sharepoint
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

SharePoint 2013 - Server Error in '/' Application - This operation can be performed only on a computer that is joined to a server farm by users who have permissions in SQL Server to read from the configuration database

Hi
After I ran SharePoint configuration wizard successfully to upgrade to SharePoint 2013 / SP1.
I can open Central Administration site just fine.
but now when I open any Site collection, I got this error.
Server Error in '/' Application
This operation can be performed only on a computer that is joined to a server farm by users who have permissions in SQL Server to read from the configuration database. To connect this server to the server farm, use the SharePoint Products Configuration
Wizard, located on the Start menu in Microsoft SharePoint 2010 Products
I have restarted all the servers: SQL server, WFE and APP servers but still cann't get this resolve.
Services on all servers are running, IIS - application pools are running.
Can someone help with where that could be a problem or if there is a solution.
Thanks in advance for your comments or advices.
Swanl

Please verify the followings:
Make sure that from the SharePoint front end and application servers that you can ping your SQL server.
Make sure that your Farm account has permission to the configuration database.
Lastly verify that your database didn't for some reasons go into recovery mode.
once everything is fine and you are still having issues, restart the SQL host service on the SQL server.
Once the service is restarted you will need to reboot Central Admin and then your front end servers.
In addition, as you built your farm inside the firewall, please disable the firwall, or create rules for SQL Server service in the firwall on SQL server.
More information about creating rules in firewall, please refer to the following posts: http://social.technet.microsoft.com/Forums/en-US/c5d4d0d0-9a3b-4431-8150-17ccfbc6fb82/can-not-create-data-source-to-an-sql-server http://www.mssqltips.com/sqlservertip/1929/configure-windows-firewall-to-work-with-sql-server/
Here is a similar post for you to take a look at: http://social.technet.microsoft.com/Forums/en-US/ea54e26c-1728-48d4-b2c5-2a3376a1082c/this-operation-can-be-performed-only-on-a-computer-that-is-joined-to-a-server-farm-by-users-who-have?forum=sharepointgeneral
Please 'propose as answer' if it helped you, also 'vote helpful' if you like this reply.

Cannot connect to the configuration database

I tried to configure my server with active directory after I have successfully configured sharepoint . For a mistake , they made me delete the active directory and now when I try to connect to the admin section or site page it me give the following error :
"Cannot connect to the configuration database"
Deleting the active directory ; I noticed that all the other users have disappeared and the service : SQL AGENT ( Sharepoint ) not run and the error is :
" This installation of SQL Server Agent is disabled. The edition of SQL Server that installed this service does not support SQL Server Agent." Thank you for the Help

Was the active directory server that you removed the last active directory server in the farm? If so then your only two real choices are to rebuild everything from scratch or restore everything from backup.
If it was just that you were trying to make the SharePoint server into a Domain Controller, then I still think you may need to rebuild. But you can try re-adding the SharePoint server to the Domain. It may have lost its Domain membership when you removed
AD from it and gone back to being a standalone server.
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

Cannot connect to the configuration database when App Server is down

Hi,
We had a App Server not come up after a restart.
When trying to access a site we get
the "Cannot connect to the configuration database"
We have now started the App Server and everything working again...
My problem, there are 2 WFE servers with NLB Configured apart of the App Server ....Why wont the site work and why cant i connect to config DB?
Something must be misconfigured? Sites should be connecting to the WFE servers and work if App server is down.
Yes, NLB Points to the WFE Servers.
Any ideas where i can look? This is a Project PWA Server, not sure if that will make a difference but the root SharePoint site had the same issue.
Thanks

Hi Danie,
is it possible that the SQL Server is running on the same box as the SharePoint (application) server? This would be the only thing that can explain the symptoms. Please check following:
IP address of the SharePoint Application server by typing nslookup AppServerName on the SharePoint WFE in Command Prompt (cmd.exe). Replace
AppServerName with the FQDN of the application server, e.g. appserver.domain.local
IP address of the SQL server by typing nslookup SQLServerName on the SharePoint WFE in Command Prompt (cmd.exe). Replace
SQLServerName with the FQDN of the SQL server, e.g. sqlserver.domain.local
SQL Server alias configuration by checking the entries in the cliconfg.exe on both SharePoint WFEs
In most cases, SQL server has nothing to do with the SharePoint Application server role and it is stored on the separate box. My guess here is that the farm started as one-server farm setup and over the time got expanded by additional 2 WFEs, moving
Web Server roles from the initial server, leaving it with the application role (service applications) and SQL server on the same box.
But, I am just making an educated guess here. Can you provide some additional information?
Hth,
Aleks

Migration on active directory from 2003 to 2008 and SharePoint error Cannot connect to the configuration database.

Hi all,
In advance i`m thankful for your help,
I come across a problem while migrating the Active Directory from Windows Server 2003 to Windows Server 2008 R2,
SharePoint 2010 is getting this error Cannot connect to the configuration database. The same goes for the Administrative page,
Nothing is change in the MySql database, same log in, same server name, i guess it have something to do with the SharePoint Farm,
My question is will reinstalling the SharePoint do the job? Or is there an easy way to get back on my old track?
I`ve try to sync users... no good
PS C:\Users\administrator.SERVERM> if($configManager.IsSynchronizationRunning()
-eq $false)
>> {
>> $configManager.StartSynchronization($true)
>> Write-Host "Started Synchronizing"
>> }
>> else
>> {
>> Write-Host "Already Synchronizing"
>> }
>>
Can someone explain a little bit more about this:
6.
Can they talk to each other?
Verify that SharePoint is using the correct IP address for the SQL server. To do this, run the ping command on the Windows SharePoint Services server.
Verify that the SharePoint server is obtaining the correct IP address for the SQL server from DNS. To do this, run the
nslookup command from the SharePoint Server.
Make sure that there are no incorrect entries for the SQL server. To do this, examine the Hosts file on the SharePoint server. This file is in the following location:
%systemroot%\system32\drivers\etc\Hosts
On the SharePoint server, look for SQL client aliases. To do this, follow these steps: Click
Start, click Run, and then type cliconfg in the
open box.
Click the Alias tab. By default, there are no SQL client aliases. If you have any aliases for the SQL server, verify that they are correct, or remove them.
Open the SQL Server Configuration Manager (Start SQL Server 2008 Configuration Tools SQL Server Configuration Manager
Navigate to the SQL Server Network Configuration Protocols for MSSQLSERVER node in the tree view
Enable TCP/IP and Named Pipes (you’ll be warned that these changes will not apply until the service is shut down)
Aleksandar Delcevski, Web-administrator School of Journalism and Public Relations Jurij Gagarin 17-1/1, 1000 Skopje, R. Macedonia t: + 389 2 3090 004 mob: +38972 257 565 [email protected]; www.vs.edu.mk; www.medium.edu.mk; www.unescochair-vs.edu.mk

Hiya,
I don't think it is necessary to reinstall.
You should just confirm that your basic infrastructure is working.
1: On the SharePoint server, open cmd and write ping <SQL server name>
2: On the SharePoint server, open cmd and write nslookup <SQL server name>
Basically the steps outlined here, is the best way to start:
6.
Can they talk to each other?
Verify that SharePoint is using the correct IP address for the SQL server. To do this, run the ping command on the Windows SharePoint Services server.
Verify that the SharePoint server is obtaining the correct IP address for the SQL server from DNS. To do this, run the
nslookup command from the SharePoint Server.
Make sure that there are no incorrect entries for the SQL server. To do this, examine the Hosts file on the SharePoint server. This file is in the following location:
%systemroot%\system32\drivers\etc\Hosts
On the SharePoint server, look for SQL client aliases. To do this, follow these steps: Click
Start, click Run, and then type cliconfg in the
open box.
Click the Alias tab. By default, there are no SQL client aliases. If you have any aliases for the SQL server, verify that they are correct, or remove them.
Open the SQL Server Configuration Manager (Start SQL Server 2008 Configuration Tools SQL Server Configuration Manager
Navigate to the SQL Server Network Configuration Protocols for MSSQLSERVER node in the tree view
Enable TCP/IP and Named Pipes (you’ll be warned that these changes will not apply until the service is shut down)

How do web front ends find the configuration database (moving whole farm to new AD forest)

We are exploring, as a possible course of action, moving our SharePoint 2007 medium farm to a different Active Directory forest (2008). There is a two way transitive trust between the source and target domains.
I have established that with such a trust it's possible to add content databases on a SQL instance in another forest, so moving content is not a big issue; we'd stand up new instances and move them: the user accounts are almost all in the target domain anyway.
However, we have a good deal of customization, including a third-party application that no longer has any support and has historically been appallingly difficult to upgrade/install fresh.
How do web front end servers find the SQL instance containing the configuration database? If the farm credentials had been previously changed to an account in the target domain, all services stopped and the configuration database moved to a new instance
with a DNS alias, would the database appear to be in the same location when SQL and SharePoint services were started on (logically) moved web front ends?

Here is more or less the high-level process for SharePoint 2007:
Mid- to high-level steps.
0. Full farm backup
1. Move users to new domain (in AD). Use stsadm -o migrateuser to migrate the old domain accounts to the new ones in SharePoint
2. Move service accounts to new domain, or create new service accounts
3. Update the farm to use the service accounts in the new domain
stsadm -o updatefarmcredentials (service accounts)
stsadm -o spsearch -farmserviceaccount
stsadm -o spsearch -farmcontentaccessaccount
stsadm -o editssp -ssplogin (for each ssp)
stsadm -o osearch -farmserviceaccount
SSO and any other remaining service accounts (CA -> Ops -> Service Accounts)
Default content access account (SSP -> Search Settings -> Default content access account)
Customizations (if there are service accounts associated with these)
3.5 Manual steps
Application pool accounts
Update permissions for SQL Logins to make sure the new accounts match the permissions for the old accounts
Add the appropriate new accounts to the DCOM IIS WAMREG Admin Service
4. Update the SQL Server service accounts. If SQL Server is shared with other applications you'll want to update the SQL Logins for these other applications as necessary and the SQL Server service accounts (DB Engine, DB Agent, Reporting Services, etc.). Might
not be necessary if this has already been done or if the SQL server is not changing domains.
5. Shut down all services on all servers in the farm (this includes SQL if you are moving to the new domain).
6. Change domain membership of all farm servers, reboot or perhaps shutdown and bring back up in the following order:
1. SQL. Verify SQL Server is running and accessible. Check event logs. Resolve any issues.
2. Central Admin server. Verify CA is accessible, check event logs. Web apps and some services may not be available if they are on servers that are currently turned off. Don't worry about these (yet).
3. Application servers, search servers, index, query, other. It's likely some or all of the WFEs will go on at this step. Verify services are accessible as expected. Check event logs. Resolve issues.
4. Any remaining WFEs. Wash, rinse, repeat.
7. Assuming everything is running as expected, users can access the sites, the sky did not fall, etc. take a full farm backup.
Hey look, here are some low-level steps too.
# updates the account used to run the CA app pool and the timer service
# must be run on the server that hosts CA
stsadm -o updatefarmcredentials -identitytype configurableid -userlogin NEWDOMAIN\farm_service_account -password Password123
# spsearch
stsadm -o spsearch -farmserviceaccount NEWDOMAIN\search_service_account -farmservicepassword Password123 -farmcontentaccessaccount NEWDOMAIN\crawl_service_account -farmcontentaccesspassword Password123
# osearch
stsadm -o osearch -farmcontactemail [email protected] -farmserviceaccount NEWDOMAIN\search_service_account -farmservicepassword Password123
# ssp service accounts
stsadm -o editssp -title SSP -ssplogin NEWDOMAIN\ssp_service_account -ssppassword Password123
# Manual steps
SSP Admin -> Search Settings -> Default Content Access Account
Application pools: CA -> Operations -> Service Accounts -> Web Application Pool (or use gl-updateapppoolaccount if available)
iisreset /noforce
Copy SQL permissions to the new accounts. Not sure why this doesn't happen.
SSP Service Account
Farm Account
Setup Account (not copied because it doesn't own anything, just used to kick off the DB for the other accounts)
Search Service
Add accounts to DCOM not sure why this didn't happen
Component Services -> Computer -> My Computer -> DCOM Config -> IIS WAMREG Service
Farm account
Application pool accounts
Search Service
SSP Service
SSP Admin
Then the fun part. Move the server into the new domain.
Check for AAMs to see if they reference the current domain. If so, change to the new one.
Stop all SP services. Join new domain.
The computer name is a netbios name in SP, this should be painless.
Some general notes from my experience doing this:
1. There is no way to update application pool identities with stsadm (I haven't explored using Powershell). You have to go through CA -> Service Accounts to update these.
2. Some SQL logins and permissions were not created. I compared the permissions before to the permissions after and copied the ones that didn't transfer. This resolved all database access issues.
3. Had to grant permissions for the service accounts in the DCOM configuration for the IIS WAMREG admin service. I expected this to happen automatically but was not surprised given the history of CLSID 61738644-F196-11D0-9953-00C04FD919C1.

SharePoint Server 2010 can't connect to the Configuration Database

Hi Techys,
I have a SharePoint Server 2010 Farm, and I have Installed SharePoint SP1 package,
Then I,m trying to run the SharePoint configuration wizard, That time i have the below error.
"Can't connect to the Configuration Database"
I have checked all the services belongs to the sql server and SharePoint server.
here i found, SharePoint Timer service is automatically Stopped while browsing the Central admin url.
Please help me to resolve the above issue.
Many Thanks,
Madhu

What you mean error in Config wizard, could you please share the complete error log?
For Timer Services, check under which account it is running and check event log why its stoped?
for CA error there are couple of possible reason for this:
Make sure SQL related instances / services are running fine.
Make sure your farm admin account have permission on config DB.
Make sure Config Database Exist.
Make sure you can connect to SQL server from your APP /WFE.
If everything is running fine, then you may need to reconfigure the sharepiont products and technologies configuration wizard. The issues might be because of the update that might have installed some additional components for installation.
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Cannot connect to the configuration database Error in HTTPS

Hi
We have a SharePoint 2010 farm ,with more then 20 web application running . I am getting "Cannot connect to the configuration database" error in one web application when we browse through https
The same application is working fine when we browse through http . I am using AAM i have 2 web server which is been network load balanced and the https traffic comes through F5
Kindly help to resolve the issue
Prabakar

HI Prabakar,Check the below URL that exactly related to the issue.
http://expertsharepoint.blogspot.de/2014/05/cannot-connect-to-configuration-database.html
Anil Avula[MCP,MCSE,MCSA,MCTS,MCITP,MCSM] See Me At: http://expertsharepoint.blogspot.de/

The configuration file did not contain well formed AppV configuration XML - When using Office 2013 ODT package

All,
I'm experiencing an issue where when using the Office 2013 package pulled down from ODT, that if I try to change the locations of either InfoPath Filler 2013 or Publisher 2013 from the default of Microsoft Office 2013 then I receive the message "The
configuration file did not contain well formed AppV configuration XML. Please check the management server event log for more information". If I check Applications and Services\Microsoft\AppV\Server-Management\Admin the error displayed there is "An
error was encountered parsing dynamic configuration file '0'. However I am able to change the shortcut location for all other applications except the above 2. I've tried redownloading the files using the ODT and also changing the version number (so far I've
tried both the 15.0.4631.1002 and 15.0.4659.1001 with the same result).
As all I'm interested in so far is having a package which contains Visio and Project I've tried following the article to exclude all the other Office elements:
http://technet.microsoft.com/library/jj219426(v=office.15).aspx#BKMK_ExcludeAppElement. However the package looks to be the same and when I load it into the management console all the options and elements to Office 2013 are available like they were before
when I hadn't set the exclude tags so I'm not sure whether the ExcludeApp parameters actually work correctly.
This then brings me onto the 3rd issue I've experienced. I have a group for the Visio users and I've set custom security for them to have Visio delivered to them but not Project and then a seperate group for just Project users who will have Project delivered
to them but not have Visio. When testing this sometimes seems to work but other times it seems to trip out and a user just in the Project or Visio group will get all of the Office 2013 applications and under the default location of Microsoft Office 2013. When
trying to spot correlation with this it appears random and can happen to any user on any device. We have sequenced a few applications ourselves where different parts are needed for different users and we have successfully managed this using different security
groups for different applications, just as I'm trying here with Office 2013.
Has anyone else experienced the issue with the "did not contain well formed XML" as at the start of the post and how were you able to resolve this? Also has anyone any advice on how to troubleshoot the issue with the security seeming to trip out
and publish all applications within a package to a user regardless of whether they are in the correct group or not?
The management / publishing servers are 5.0.1224.0 which is SP1 HF4 and the clients are on SP2 HF5.
Thanks

Nicke,
The config files are UTF-8. I did find the same article as yourself, however when searching for the value ‘TakeoverExtensionPointsFrom46=’ within either of the configuration.xml files that text isn’t found.
No sinister reason not to share the file used, just it’s the same structure as referenced in the article:
http://technet.microsoft.com/en-us/library/dn745895(v=office.15).aspx. The only difference being that I’m using ProPlusVolume and I’ve set a version number (which is the October
2014 update). I’ve even looked to follow the above example as closely as possible in just using the ExcludeApp ID of Access and InfoPath, just to try and prove the process. However I still get the usual full package. The version of the Click-to-Run setup.exe
I’m using is 15.0.4623.1001, so later than the version specified at the end of that article which is 15.0.4619.1000. Where can I expect to see the elements excluded? Will it be when loading the package into the management console or would it just not appear
on the machine when delivered?
<Configuration>
<Add SourcePath="C:\OfficeDeploymentToolV2" Version="15.0.4659.1001" OfficeClientEdition="32">
    <Product ID="ProPlusVolume">
      <Language ID="en-us" />
<ExcludeApp ID="Access" />
<ExcludeApp ID="InfoPath" />
    </Product>
</Add>
</Configuration>
3). We’ve not used global publishing in our environment yet so I will try that. I’ve set both GlobalRefreshEnabled and GlobalRefreshOnLogon to True and when using the command Get-AppvPublishingServer on the client I’m testing with I can see this is pulled
through correctly. I’ve also added the client name to the AD group used to grant access to the package and it is published. However nothing is pulling through onto the Client, so are there any steps I’ve missed or misinterpreted when looking to set this up?
I guess the global publishing is there to keep in with licensing for Office being per device? On a slight aside, as Windows licensing is being changed to allow per user licensing
http://www.zdnet.com/microsoft-to-make-per-user-windows-licensing-available-to-enterprise-customers-7000035401/ does anyone know if there are any plans to allow for Office / Project / Visio licenses to go per user as well? We’re a volume license customer
rather than subscription based so I think a lot of the options to selectively deploy Visio and Project are excluded for us.
Dan,
Ok that explains why the security could be tripping out then and leading to this result. As above I’ll try with global publishing and see how I get on.
From what I’ve read / watched I think only one Office 2013 package can be published to a machine, so we would be unable to have a separate package for Visio and a separate package for Project and then attempt to deliver
them both together. If a user wanted both Project and Visio then I guess we’d need to have a combined Project and Visio package to cover than scenario, but then 2 more separate Project and Visio packages for those who would only want either Project and Visio
(I think).
The scenario we’re looking at is to see whether we are able to deliver Project and / or Visio to different users through an AppV package and this will then cover users on XenApp or on fat clients. Only a small proportion of our
users will need access to Project and / or Visio so therefore we’d only have a small amount of Project and Visio licenses.
However from what I’ve tested up to this point and from what I’ve picked up from Forum posts / watched on TechEd sessions is that as publishing is Global and is unable to use different security groups for different elements of the
suite, then using Office through AppV is only suitable if you will be delivering the whole suite (including Project and Visio) to all of your users. So in a scenario where you’d only want certain elements to be delivered to a handful of users then you’d need
to keep with traditional ESD methods to have this installed onto fat clients and steer clear of XenApp. If wanting to install to XenApp then a lockdown tool like AppSense or AppLocker would also need to be brought into the equation.
Is my understanding above correct or have I missed some options / methods?
If the full Office package is always delivered but a company only has Office licenses and no Project and Visio licenses for all its users, how do they stop Project and Visio being delivered and being available? Or again if you have
this use case is the AppV method one which will be unsuitable?
Thanks

What is the command to verify the configuration that are not saved or sent to local controllers?

Q: What is the command to verify the configuration that are not saved or sent to local controllers?
A: We can execute the command that is shown in below image to check the status of the configuration that has been made.
Note: For example I made changes to the default VAP profile and executed the command "show master-configpending" which shows the pending configuration to be saved/sent to local controllers.

But that jar file loads without images and icons when it is in other directory.Images should be accessed via a URL rather than using a filename because they will exist as entries in the jar archive not as files. Typically this URL would be obtained by using the Class method [getResource()|http://java.sun.com/javase/6/docs/api/java/lang/Class.html#getResource(java.lang.String)]. There are details in this [Java World article|http://www.javaworld.com/javaworld/javaqa/2002-11/02-qa-1122-resources.html].

Ie 11 fails with 'IE Security detected that the URL and the configuration link to not match

HI,
I Have a user that is using IE 11 and is getting the following error:
IE Security detected that the URL and the configuration link to not match. Please use the URL as configured. Is and IP based URL. On IE 10 we get a similar message, but as soon as we add it to our trusted site and switch to compatibility
mode the issue goes away.
For example http://10.10.10.180/xxx/iafwebsite_810/
What would be causing this issue?
Any help would be appreciated.
Thanks,
Trish
Trish Leppa

Hi,
It seems that this URL doesn't meet security level. Thus, as long as you add this URL to Trusted sites zone, this issue is fixed.
Thanks!
Andy Altmann
TechNet Community Support

The Configuration Area could not be created (HANA Studio)

This message is posted in case some else comes across this issue. After installing the SAP Hana Studion, I was continually receiving the following message:
"The Configuration Area at 'c:\Users\U\.eclipse\org.eclipse.platform_3.5.0_1152700900\configuration' could not be created. Please choose a writable location using the '-configuration' command line option'.
After trying to mess around with the command line option, I found that I needed to run the Hana Studio as an Administrator. ie, right click on the HANA Studio icon and select 'Run as Administrator' from the context menu.

If this is a new setup discard existing web application along with site and content database. Recreate the same web application and try provisioning PWA with new databases
Hrishi Deshpande – Senior Consultant DeltaBahn
Blog | < |
LinkedIn
Please click Mark As Answer; if a post solves your problem or Vote As Helpful if a post has been useful to you.This can be beneficial to other community members reading the thread.

The type '*', provided as the Service attribute value in the ServiceHost directive, or provided in the configuration element * could not be found

I have a provider hosted app in sharepoint which works locally without problem. I followed this tutorial to publish it to azure
http://blogs.technet.com/b/sharepointdevelopersupport/archive/2013/09/05/how-to-deploy-a-provider-hosted-app-as-an-azure-site.aspx
However after publishing the webservice doesnt work I get this exception:
[InvalidOperationException: The type 'x.IntranetWeb.Services.AppEventReceiver', provided as the Service attribute value in the ServiceHost directive, or provided in the configuration element system.serviceModel/serviceHostingEnvironment/serviceActivations could not be found.]
System.ServiceModel.Activation.ServiceHostFactory.CreateServiceHost(String constructorString, Uri[] baseAddresses) +62739
System.ServiceModel.HostingManager.CreateService(String normalizedVirtualPath, EventTraceActivity eventTraceActivity) +1429
System.ServiceModel.HostingManager.ActivateService(ServiceActivationInfo serviceActivationInfo, EventTraceActivity eventTraceActivity) +52
System.ServiceModel.HostingManager.EnsureServiceAvailable(String normalizedVirtualPath, EventTraceActivity eventTraceActivity) +598
[ServiceActivationException: The service '/Services/AppEventReceiver.svc' cannot be activated due to an exception during compilation. The exception message is: The type 'x.IntranetWeb.Services.AppEventReceiver', provided as the Service attribute value in the ServiceHost directive, or provided in the configuration element system.serviceModel/serviceHostingEnvironment/serviceActivations could not be found..]
System.Runtime.AsyncResult.End(IAsyncResult result) +486572
System.ServiceModel.Activation.HostedHttpRequestAsyncResult.End(IAsyncResult result) +174
System.ServiceModel.Activation.ServiceHttpModule.EndProcessRequest(IAsyncResult ar) +345998
System.Web.AsyncEventExecutionStep.OnAsyncEventCompletion(IAsyncResult ar) +9683593
My web.config which I didnt touch.
<?xml version="1.0" encoding="utf-8"?>

<configuration>
<appSettings>
<add key="webpages:Version" value="3.0.0.0" />
<add key="webpages:Enabled" value="false" />
<add key="ClientValidationEnabled" value="true" />
<add key="UnobtrusiveJavaScriptEnabled" value="true" />
<add key="ClientId" value="xx-04e7-4caf-854a-89c20577d7da" />
<add key="ClientSecret" value="ljguTvxHR+xx+Pl1IMg1Hjt5rsQ=" />
</appSettings>
<system.web>
<compilation debug="true" targetFramework="4.5" />
<httpRuntime targetFramework="4.5" />
<customErrors mode="Off"/>
</system.web>
<runtime>
<assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1">
<dependentAssembly>
<assemblyIdentity name="Newtonsoft.Json" culture="neutral" publicKeyToken="30ad4fe6b2a6aeed" />
<bindingRedirect oldVersion="0.0.0.0-6.0.0.0" newVersion="6.0.0.0" />
</dependentAssembly>
<dependentAssembly>
<assemblyIdentity name="System.Web.Optimization" publicKeyToken="31bf3856ad364e35" />
<bindingRedirect oldVersion="1.0.0.0-1.1.0.0" newVersion="1.1.0.0" />
</dependentAssembly>
<dependentAssembly>
<assemblyIdentity name="WebGrease" publicKeyToken="31bf3856ad364e35" />
<bindingRedirect oldVersion="0.0.0.0-1.5.2.14234" newVersion="1.5.2.14234" />
</dependentAssembly>
<dependentAssembly>
<assemblyIdentity name="System.Web.Helpers" publicKeyToken="31bf3856ad364e35" />
<bindingRedirect oldVersion="1.0.0.0-3.0.0.0" newVersion="3.0.0.0" />
</dependentAssembly>
<dependentAssembly>
<assemblyIdentity name="System.Web.WebPages" publicKeyToken="31bf3856ad364e35" />
<bindingRedirect oldVersion="1.0.0.0-3.0.0.0" newVersion="3.0.0.0" />
</dependentAssembly>
<dependentAssembly>
<assemblyIdentity name="System.Web.Mvc" publicKeyToken="31bf3856ad364e35" />
<bindingRedirect oldVersion="1.0.0.0-5.2.0.0" newVersion="5.2.0.0" />
</dependentAssembly>
</assemblyBinding>
</runtime>
<system.serviceModel>
<bindings>
<basicHttpBinding>

<binding name="secureBinding">
<security mode="Transport" />
</binding>
</basicHttpBinding>
</bindings>
<protocolMapping>
<add binding="basicHttpBinding" scheme="https" bindingConfiguration="secureBinding" />
</protocolMapping>
</system.serviceModel>
<system.webServer>
<handlers>
<remove name="ExtensionlessUrlHandler-Integrated-4.0" />
<remove name="OPTIONSVerbHandler" />
<remove name="TRACEVerbHandler" />
<add name="ExtensionlessUrlHandler-Integrated-4.0" path="*." verb="*" type="System.Web.Handlers.TransferRequestHandler" preCondition="integratedMode,runtimeVersionv4.0" />
</handlers>
</system.webServer>
</configuration>
and a piece of the code of the remote event receiver
<%@ ServiceHost Language="C#" Debug="true" Service="x.IntranetWeb.Services.AppEventReceiver" CodeBehind="AppEventReceiver.svc.cs" %>
namespace x.IntranetWeb.Services
public class AppEventReceiver : IRemoteEventService
Follow me on Twitter
levalencia Blog

Hi,
The issue here is the mapping of the interface to the service in question, and usually points to a possible mistype or rename of something within your service architecture.
You need to make sure your namespace and service name here match your service name itself.
For detailed information, you could refer to:
https://haddicus.wordpress.com/2011/06/06/service-attribute-value-not-found-wcf-services/
http://stackoverflow.com/questions/9557221/the-type-restservice-weddingservice-provided-as-the-service-attribute-value-i
Regards

The configure database page not appear in grid control

hi
when i try to configure a database target in grid control appear a error . i know that the nslookup not working correctly because these machines not adding to dns server
it's possible communication between oms and agent whithout an dns server, only adding lines in the /etc/hosts
thanks

Which self Service function you are using to change the assignment ?
Their are two API to update asg values. Try to apply user hook on both of them and retry ur scenario.

The configured database is not a compatible database

Similar Messages

Maybe you are looking for