The connection to the server has been lost

The Connection to the server has been lost.There might have been a problem in connection to the network, or Playstation TM networkor the service provider might be temprarily busy.(CE-34861-2) 

im having the same problem its not letting me log in? 

Similar Messages

  • Intermittent VISA errors -10073807194 'connection for given session has been lost'

    I am using a USB/Serial converter with FTDI chipset (VCP configured) to communicate with a serial device. There is an intermittent problem where the connection disappears, and the VISA error '10073807194' is generated. I have read carefully through the other threads related to this error, but still do not have a solution. Some background information on my set-up:
    1) NI VISA 5.1.2
    2) LV 2010
    3) Windows 7 - 64 bit
    Could windows be dropping the connection for the FTDI device when communication errors occur? Has anyone had this experience? We were previously using a prolific converter, and were encountering other communication errors where the read would timeout or only partial responses would be returned, but the VISA connection was not lost. I know the prolific converters can be problematic on 64 bit windows, so I was hoping the new converter would solve the problems.
    I will post the code tomorrow, but I open the VISA session and configure the port on start up and close it when the application exits. I am using the bytes at port with the VISA read. However, the code I have has been running fine on two test machines in our office for several months. The above issues have been occuring at a customer's site overseas. We have not been able to reproduce the above problems here. There may be environmental factors at play (improper grounding, noise, etc.)
    I should also mention that the original setup has this USB converter running through a hub, but the hub on their setup had to be removed due to reoccurring communication problems with this serial device, as well as other connected devices. We are going to get them to try installing a serial port on one of their PCs, and see if it eliminates the issue.
    In the mean time any experience/help troubleshooting would really be appreciated.  Thank you!!!
    Zalusky

    Well, I saw your Kudos to this post
    Using "Bytes at port" on the FTDI driver can be very problematic and is the likely culprit for the behavior change.  If there is any way to use a term char with the serial protocol change this.
    The FTDI driver does have control of the buffer size and latency timer.  Read through the documentation in this link.  At the very least your polling rate for "Bytes at port" should be greater than the latency timer setting if the expected transfer is less than the buffer size. (shorten the timer )
    Jeff

  • Why am I getting an alert saying the connection to my hotmail has been reset when I can connect to other sites?

    I get an alert banner saying my connection has been reset. This only happens when I try to connect to hotmail. It works fine when I connect to other sites, including this one. This is a new problem and I have not experienced it before, even though I have had problems with broadband connections. There are unusaul movements on my hotmail like when I delete messages and clear the delete folder, the deleted messages reappear when I reopen my hotmail. I have also had messages missing and reappearing even though they are from several year ago. The new problem with the alert message started about 10 minutes ago. I was able to access my hotmail via Safari but I get the alert message everytime I try with firefox.

    Hi ...
    Try here > Mac App Store: "An unknown error occurred (100)" when purchasing
    If that doesn't help, drag the App Store icon straight up off your Dock so it goes, "poof".
    Now drag the App Store icon from your Applications folder to the Dock. Try updating your apps.

  • ESS Time Sheet Entry Error - "critical error, data has been lost"

    I tried saving his time sheet data on the ESS . I noticed that when I went back to check on the draft, Draft has no longer exists  or had any information. When I tried to find the draft, I got the message "critical error, data has been lost"
    Can any one help on this issue if faced.

    Hello,,
    Are you able to enter time on the backend via Cat2, for example?
    Please provide further details for the community to assist you.
    Details like:
    - Which ERP version are you running?
    - Do I have any dumps or logs on ST22 and SLG1?
    Thank you.

  • Visual Studio 2005 The remote connection to the device has been lost. Please verify the device connection and restart debugging.

    Basically I've been using Visual Studio 2005 for a few weeks now moving a Pocket PC project from 2003 to 2005. When I hit the Start Debugging Button every time until today the project would rebuild and deploy to my pocket PC allowing me to debug etc but now I get
    The remote connection to the device has been lost.
    Please verify the device conection and restart debugging.
    I used to get this problem in VS2003 sometimes and just like the numerous posts on different sites that I've looked at the problem eventually goes away and I'm none the wiser. One guy said that he found that if he went to bed the problem was resolved when he came back!
    My PDA running Windows 2003 2nd Edition is directly connected to my PC via a USB port. I've rebooted my PC and done a soft reset on the PDA but it didn't help. I'm using ActiveSync 4.1.
    Does anyone know how to resolve this problem?

    I still can't debug. I have just tried a hard reset and I get the same problem
    The build output is as follows
    ------ Build started: Project: BO, Configuration: Debug Any CPU ------
    BO -> C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\BO\bin\Debug\BO.dll
    ------ Build started: Project: Printing, Configuration: Debug Any CPU ------
    No way to resolve conflict between "System.Data.SqlServerCe, Version=3.0.3600.0, Culture=neutral, PublicKeyToken=3be235df1c8d2ad3, Retargetable=Yes" and "System.Data.SqlServerCe, Version=1.0.5000.0, Culture=neutral, PublicKeyToken=969db8053d3322ac, Retargetable=Yes". Choosing "System.Data.SqlServerCe, Version=3.0.3600.0, Culture=neutral, PublicKeyToken=3be235df1c8d2ad3, Retargetable=Yes" arbitrarily.
    Printing -> C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\Printing\bin\Debug\Printing.dll
    ------ Build started: Project: MobileSeller, Configuration: Debug Any CPU ------
    Consider app.config remapping of assembly "System.Data, Culture=neutral, PublicKeyToken=969db8053d3322ac, Retargetable=Yes" from Version "1.0.5000.0" [] to Version "2.0.0.0" [C:\Program Files\Microsoft Visual Studio 8\SmartDevices\SDK\CompactFramework\2.0\v2.0\WindowsCE\System.Data.dll] to solve conflict and get rid of warning.
    Consider app.config remapping of assembly "System.Windows.Forms, Culture=neutral, PublicKeyToken=969db8053d3322ac, Retargetable=Yes" from Version "1.0.5000.0" [] to Version "2.0.0.0" [C:\Program Files\Microsoft Visual Studio 8\SmartDevices\SDK\CompactFramework\2.0\v2.0\WindowsCE\System.Windows.Forms.dll] to solve conflict and get rid of warning.
    Consider app.config remapping of assembly "System, Culture=neutral, PublicKeyToken=969db8053d3322ac, Retargetable=Yes" from Version "1.0.5000.0" [] to Version "2.0.0.0" [C:\Program Files\Microsoft Visual Studio 8\SmartDevices\SDK\CompactFramework\2.0\v2.0\WindowsCE\System.dll] to solve conflict and get rid of warning.
    C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\Microsoft.Common.targets : warning MSB3247: Found conflicts between different versions of the same dependent assembly.
    MobileSeller -> C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\bin\Debug\MobileSeller.exe
    Done building project "MobileSeller.vbproj".
    ------ Skipped Deploy: Project: BO, Configuration: Debug Any CPU ------
    Project not selected to build for this solution configuration
    ------ Skipped Deploy: Project: Printing, Configuration: Debug Any CPU ------
    Project not selected to build for this solution configuration
    ------ Deploy started: Project: MobileSeller, Configuration: Debug Any CPU ------
    Deploying 'C:\Program Files\Microsoft Visual Studio 8\SmartDevices\SDK\CompactFramework\2.0\v2.0\windowsce\wce400\armv4\NETCFV2.ppc.armv4.cab'
    Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\BO\bin\Debug\System.Data.Common.dll'
    Deploying 'C:\Program Files\Microsoft Visual Studio 8\SmartDevices\SDK\SQL Server\Mobile\v2.0\wce400\ARMV4\sqlce20.ppc.wce4.armv4.CAB'
    Deploying 'C:\Program Files\Microsoft Visual Studio 8\SmartDevices\SDK\SQL Server\Mobile\v2.0\wce400\ARMV4\sqlce20.dev.ppc.wce4.armv4.cab'
    Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\BO\bin\Debug\InTheHand.Data.Adoce.dll'
    Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\BO\bin\Debug\InTheHand.Interop.dll'
    Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\Printing\bin\Debug\PocketHTMLprint_NetCF.dll'
    Deploying 'C:\Dev\MILLAR CODE CABINET\VS2003CF\References\USICF.dll'
    Deploying 'C:\Program Files\Microsoft Visual Studio 8\SmartDevices\SDK\SQL Server\Mobile\v3.0\wce400\ARMV4\sqlce30.ppc.wce4.armv4.CAB'
    Deploying 'C:\Program Files\Microsoft Visual Studio 8\SmartDevices\SDK\SQL Server\Mobile\v3.0\wce400\ARMV4\sqlce30.repl.ppc.wce4.armv4.CAB'
    Deploying 'C:\Program Files\Microsoft Visual Studio 8\SmartDevices\SDK\SQL Server\Mobile\v3.0\wce400\ARMV4\sqlce30.dev.enu.ppc.wce4.armv4.CAB'
    Deploying 'C:\Dev\VS2005CF\References\release\Signature.dll'
    Deploying 'C:\Dev\VS2005CF\References\release\RealUpDown.dll'
    Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\Printing\bin\Debug\Printing.dll'
    Deploying 'C:\Dev\VS2005CF\References\release\PhoneAPI.dll'
    Deploying 'C:\Dev\VS2005CF\References\release\MVnetApplication.dll'
    Deploying 'C:\Dev\VS2005CF\References\release\MobileHList.dll'
    Deploying 'C:\Dev\VS2005CF\References\release\MobileGrid.dll'
    Deploying 'C:\Dev\VS2005CF\References\release\ImageButtons.dll'
    Deploying 'C:\Dev\VS2005CF\References\release\CreditCardValidator.dll'
    Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\BO\bin\Debug\BO.dll'
    Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\View.ico'
    Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\Unscheduled.ico'
    Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\Unschedule.ico'
    Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\tr.gif'
    Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\top.gif'
    Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\Tools.ico'
    Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\tl.gif'
    Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\SmlButUnPressed.jpg'
    Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\SmlButSquUnPressed.jpg'
    Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\SmlButSquPressed.jpg'
    Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\SmlButPressed.jpg'
    Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\Select1.jpg'
    Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\sekonda3.gif'
    Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\sekonda2.gif'
    Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\sekonda1.gif'
    Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\ScrewDriver.ico'
    Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\Scheduled.ico'
    Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\Scheduled.gif'
    Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\Schedule.ico'
    Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\Scan.ico'
    Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\Save.ICO'
    Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\Remove.ico'
    Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\ReceiptTemplate.htm'
    Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\Problem.ico'
    Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\PrintDC.dll'
    Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\Print.ico'
    Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\Prev.ico'
    Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\bin\Debug\PocketHTMLprint_NetCF.dll'
    Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\pocketHTMLprint.dll'
    Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\Phone.gif'
    Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\Page.ico'
    Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\NotesExist.ICO'
    Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\Notes.ICO'
    Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\Next.ico'
    Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\NewCust.ico'
    Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\MVNetLogoSmall.png'
    Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\mtiny.jpg'
    Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\MoneyScrew.ico'
    Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\Money.ico'
    Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\Magnify.ico'
    Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\Lock.ico'
    Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\Line.gif'
    Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\InvoiceTemplate.htm'
    Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\gradus4.gif'
    Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\gradus3.gif'
    Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\gradus2.gif'
    Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\gradus1.gif'
    Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\FindVisit.ico'
    Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\FindCustomer.ico'
    Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\Find.ico'
    Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\DropDown.jpg'
    Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\dentsplus3.gif'
    Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\dentsplus2.gif'
    Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\dentsplus1.gif'
    Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\DentDevilsCar.gif'
    Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\DentDevils2.gif'
    Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\DentDevils1.gif'
    Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\Default2.gif'
    Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\Default1.gif'
    Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\Cust.ico'
    Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\Completed.gif'
    Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\Cancelled.gif'
    Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\Call.ico'
    Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\br.gif'
    Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\bottom.gif'
    Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\bl.gif'
    Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\BigButUnPressed.jpg'
    Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\BigButPressed.jpg'
    Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\bin\Debug\MobileSeller.exe'
    Deploying 'C:\Program Files\Microsoft Visual Studio 8\SmartDevices\SDK\CompactFramework\2.0\v2.0\windowsce\diagnostics\System_SR_enu.cab'
    ========== Build: 3 succeeded or up-to-date, 0 failed, 0 skipped ==========
    ========== Deploy: 1 succeeded, 0 failed, 2 skipped ==========
    Visual studio indicates that
    Deployment Started
    Depolyment Succeeded
    Loading Symbols
    Ready
    and then I get the same problem ie The Remote connection to the device has been lost

  • The Connection has been lost by the host--AIM, iChat

    Hi. Every time I try to log on to AIM or iChat, it goes through the sequence of signing on, but then I get "The Connection has been lost by the host". Now, I would think it would be my connection, being on a college campus and all, but I have no issues surfing the web and checking my e-mail via entourage. My roommates and everyone on my floor have no issues, but then again, none of them are using a Mac.
    It worked this whole week and then yesterday it decided to crap out on me. I've restarted, turned off the computer, went back to it...nothing.
    I have MacBook using OS X, I have the latest version of AIM and iChat, and I'm using ethernet right now.
    --I've tried changing the ports in both programs...no luck.
    and my college network doesn't offer support for any IM program, no matter how hard you beg them.
    Message was edited by: Sammi921
    Message was edited by: Sammi921

    Hi
    Try logging on to AIM on port 443 rather than port 5190.
    Go to IChat in the menu bar > Preferences > Accounts.
    Log out of AIM and then use the Server Settings tab
    Set the port to 443.
    Log back in again.
    Tony

  • Internet Download error message: the connection with the server has been reset

    With an WRT54GS v6 firmware v 1.50.9 on Windows XP SP2 with Internet Explorer 7, Intel wireless internal adaptor w/ 802.11b,  I was getting the error message "The connection with the server has been reset" when downloading most anything from the Internet.  My IP address would then be reset and download would be interrupted.  To resolve, I turned off the WZC (Wireless Zero Configuration) Services, and this seems to correct the problem.
    Control Panel > Admin Tools > Services > Wireless Zero Configuration > Disable
    Hopes this helps.

    Hi!
    Im using Windows 7.... I tried looking for the Wireless Config - but it isn't in the Services options!
    So, what can I do now?
    Thanx

  • The wifi has been lost or disconnected on my iPad. It's the iPad 2 and has not been updated yet. It's IOS 6.1.3 .. how do I add a network back onto it? I have typed in the name and chosen each of the securities and still hasn't connected!

    The wifi has been lost or disconnected on my iPad. It's the iPad 2 and has not been updated yet. It's IOS 6.1.3 .. how do I add a network back onto it? I have typed in the name and chosen each of the securities and still hasn't connected!

    Hey there Luba_kalstad,
    It sounds like you are unable to join your network and cannot see it in the Wi-Fi list in Settings. I would try the troubleshooting outlined in this article named:
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/ts1398
    Be sure you're in range of your Wi-Fi router (access point).
    Tap Settings > Wi-Fi and turn Wi-Fi off and on. If your Wi-Fi setting is dimmed, follow these steps.
    Confirm that your Wi-Fi router and cable or DSL modem are connected to power, turned on, and connected to the Internet. If not, refer to your network administrator or Internet service provider (ISP) for assistance.
    Restart your iOS device.
    Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected.
    Tap and Forget this Network.
    Try to connect to your desired Wi-Fi network.
    Note: You may need to enter your Wi-Fi password again if your network requires one.
    Turn your Wi-Fi router off and on2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
    Update your device to the latest version of software.
    Update your Wi-Fi router to the latest firmware2. For AirPort Base Stations, install updates using the AirPort Utility.
    And this section down toward the bottom if needed:
    Unable to locate a Wi-Fi network
    Verify that the network is available by tapping Settings > Wi-Fi and choosing from the available networks.Note: It may take a few seconds for the Wi-Fi network name to appear.
    Move closer to your wireless router (access point) and attempt to locate the Wi-Fi network.
    If you do not see the network you would like to join, you may be attempting to connect to a hidden network. Learn how to join a hidden network.
    Supported Wi-Fi configurations vary by iOS device model. Find out which standards your device supports3.
    Reset network settings by tapping Settings > General > Reset > Reset Network Settings. Note: This will reset all network settings including:
    previously connected Wi-Fi networks and passwords
    recently used Bluetooth accessories
    VPN and APN settings
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • My iphone has been lost in my house and i need to find a way to track it and its offline. it wont connect to the internet so there isnt a way to use find my iphone. i just want to play a sound on it. is there any way i can get a app that connects my ipod

    my iphone has been lost in my house and i need to find a way to track it and its offline. it wont connect to the internet so there isnt a way to use find my iphone. i just want to play a sound on it. is there any way i can get a app that connects my ipod from a laptop or a different way to find it.

    If your phone is offline, the ONLY way to find it is to look for it the old fashioned way.  Your phone CANNOT be located electronically if it's offline.

  • A website I frequently visit will no longer come up. Safaris says that my connection has been lost but it hasn't. I even get emails from the website but I still can't get on it. Why would it all of a sudden do this?

    A website I frequently visit will no longer come up. Safaris says that my connection has been lost but it hasn't. I even get emails from the website but I still can't get on it. Why would it all of a sudden do this?

    The reason, I included the annotation that I'd upgraded my Itunes, (On my Computer) is B/C in many forums - the very first question, *HELPERS* ask, is. "Do you have the latest version of Itunes downloaded on your computer." I wanted to knock out any obvious replies.
    Now-  "DO YOU have any idea,"... how your UNHELPFUL remarks, do absolutely nothing but hurt others that might not have the EXPERIENCE you have? How do you expect people to know things without asking questions? Whew! RUDE!!
    Message was edited by: Apple I0S Help Team

  • The network connection to the printer has been lost.

    I have reserved an IP address for my printer in my router. I routinely get the following message in Windows 8.1 64: "Scan to computer is no longer activated. The network connection to the printer has been lost." Also, when printing, sometimes the printing cuts out (i.e. half the job).

    bcbrewster
    Well, then the issue remains vague and you must track down a reason for the disconnect -- the connection is breaking between the printer and the computer -- and apparently, from your description - this even happens on occasion during a print job.   
    Event Viewer Logs
    If the computer is aware of the cause, you might find it in the Event Viewer logs.  There is a wealth of information packed into the daily logs kept by the system on a great many of the computer's actvitiies.  The trick is to 1) find the log containing the information you seek, and 2) Decipher what you have found. 
    Reading Event Viewer logs is part science and part art.   I cannot tell you precisely where to look because I don't know where your problem is located. 
    I can give you some information on how to get started:
    Windows 8 Event Viewer
    ===============================================
    Disconnections
    Disconnection can be caused by a number of things, most of which you have probably already read about in your searches:
    The issue could be due to the need for a Firmware Update.  You would have noted this during your previous Troubleshooting - and the only Firmware update for this model is dated 2013. 
    HPCOM_HP_ENVY_4500_series_x86_000_003.exe
    Reference:
    HP ENVY 4500 e-All-in-One Printer
    =======================================================
    Possible causes for connection issues include and are not limited to:
    The router should be no closer than three feet (about a meter) to the printer - too close is as bad as too far away
    You can try moving things around -- even a few inches one way or another can help
    Weak antennas or single antenna routers cannot be "magically" made better; these routers might perform better when placed higher in a room rather than lower.  That is, place the router high on a shelf instead of low in a cabinet
    Try changing the channel -- 6, 11 might work better
    Try using a static IP outside of the DHCP range of the computers on the same network.
    ==========================================
    References and Power Options
    IF you are running a notebook
    and if the notebook is running on battery
    and if that notebook is running wireless
    and if the notebook is having trouble staying connected
    THEN:
    Control Panel > icon view > Power Options >
    Under Choose or customize a power plan >>
    Under Plans shown on the battery meter >>
    Next to HP Recommended >> Click Change Plan Settings >
    Click Change advanced power Settings >
    Scroll down and Open Wireless Adapter Settings >
    Click Power Saving Mode >>
    Adjust Power settings for On battery and for Plugged in Options
    Click on the current option to enable the drop down menu and see the available settings wireless adapter / system
    If you have been having trouble with running wireless on battery, consider setting the wireless to maximum performance while on battery.
    Understand this uses more battery resource.
    Click OK to save and exit
    =================================
    References:
    Static IP Address for Printer
    Settings to Improve Wireless Connectivity
    Click the Kudos Thumbs-Up to say Thank You!
    And...Click Accept as Solution when my Answer provides a Fix or Workaround!
    I am pleased to provide assistance on behalf of HP. I do not work for HP. 
    Kind Regards,
    Dragon-Fur

  • CS4 "The connection to the remote host has been lost"

    Suddenly I get the error message (CS4) when I try connecting to remote hosts: "The connection to the remote host has been lost. Click Refresh to reconnect." It is impossible to connect to ANY remote host.
    This happens for all my sites, on remote servers in different countries, so it must be a DW problem. Please advice.

    Have you tried using Passive mode:
    Site Definition > Advanced > click the Passive FTP box and see if that works.
    Nadia
    Adobe Community Expert : Dreamweaver
    Unique CSS Templates | Tutorials | SEO Articles
    http://www.DreamweaverResources.com
    Web Design & Development
    http://www.perrelink.com.au
    http://twitter.com/nadiap

  • Safari downloads: The network connection has been lost

    I 'm downloading office 365 and the network connection is fine, but all the time the downloads folder tells me : " The network connection has been lost"
    What 's going on?

    Suna,
    Based upon what you describe, I would assume that your program, while it is running, is initially small enough for the memory (RAM) in the FP-20XX but during the running of the program, it keeps consuming more memory until it runs out and crashes the module. With RT targets, you have to be very memory efficient; do not allow arrays to be built with unchecked size boundaries. The solution is to use good coding techniques, avoid unneccessarily large and complicated data types. Avoid unneccessary uses of read local variables or read global variables.
    Alternatively, if you are using the Watchdog VI's. You may be failing to whack the watchdog often enough causing the module to reset itself.
    Regards,
    Aaron

  • Error (2931) VMM is unable to complete the request. The connection to the VMM agent on the virtualization server (host.domain.local) was lost.

    Experts,
    kindly advice for this error when create vm from a templates, while i'm not having this issue when create the vm to another host from the same templates,
    firewall is disabled and no antivirus on the host.
    The network and the ping is very stable, and the WS-Management service is running on the host,
    Host  : windows server 2012 R2
    VMM : 2012 R2 3.2.7895.0
    VMM updated from RU2 to RU5
    Error (2931)
    VMM is unable to complete the request. The connection to the VMM agent on the virtualization server (host.domain.local) was lost.
    Unknown error (0x80338029)
    Recommended Action
    Ensure that the Windows Remote Management (WS-Management) service and the VMM agent are installed and running and that a firewall is not blocking HTTPS traffic.
    This can also happen due to DNS issues. Try and see if the server (ms-lab-01.eccsolutions.local) is reachable over the network and can be looked up in DNS. You can ping the virtualization server from VMM management server and make sure that the
    IP address returned matches the IP address locally obtained from the virtualization server.
    If the error still persists, restart the virtualization server, and then try the operation again.
    Ahmad Samir | MCSE 2003, MCSE 2012 Private Cloud | MCTS: SCOM 2007, Lync 2010, Exchange 2010.

    Ok  I will try another template,
    and the drop happen in the customization after deploying the VHDX file as my first image.
    I had this answer from partner forum. but i didn't try it yet
    Backup your VMM database and then check the
    tbl_VMM_Lock table in the
    VMM database to see if it has any locks listed, do this after stopping the System Center Virtual Machine Manager Service.
    If there are locks listed in the tbl_VMM_Lock
    table you can clear them by executing the prc_VMM_ReleaseAllLocks
    stored procedure.
    Ahmad Samir | MCSE 2003, MCSE 2012 Private Cloud | MCTS: SCOM 2007, Lync 2010, Exchange 2010, Server Virtualization.

  • Macbook pro has been wiped after an update and the majority of the contents has been lost, is there anything I can do to recover it?

    I updated my laptop and now the majority of my contents seem to have been wiped.  Is there anything I can do to recover them? My backup was connected at the time so it has already backed-up to the computer's present state.  Most photos/ Itunes/ Mail... has been lost.  I have some stuff but only up until January 2013.

    If all your files are missing
    You may have logged in as a different user, such as Guest. Open the Users & Groups pane in System Preferences. Your name should be at the top of the user list, under Current User. See also this support article. 
    If files are missing from one folder
    Change the Finder view mode; for example, from icon view to list view, or vice versa.
    If files are present, but seem outdated
    You may have started up from a different volume (disk.) Open the Startup Disk preference pane and check the selection.

Maybe you are looking for

  • BitchX (irc client) With Mac OS X

    Ok i have everything working but i want to be able to add it to my dock.. like as am application? Is this possible? I also want to load the script with this command ./bitchx -a irc.dal.net how can i make an app and make it load with that command? fyi

  • Can photos on iCloud be moved into an album

    I have a group of photos in iCloud which I would like in one album there for a limited time and which can later be deleted. Is there a way to move individual photos into an album in the cloud?

  • Illustrator CS3 13.0.2 update failed to install

    Received an automatic update. When I clicked to install, the update returned this message: Installation Incomplete Adobe Illustrator CS3 13.0.2 update failed to install The update cannot be applied to the product. Say what? I'm at Illustrator CS3 13.

  • Mylyn 3.16 is now available

    We are very pleased to announce that Mylyn 3.16 is now available for Eclipse 3.8, 4.4 and 4.5. See the New & Noteworthy for more features: http://eclipse.org/mylyn/new/ You can get Mylyn 3.16 from: http://eclipse.org/mylyn/downloads/ Thanks, and stay

  • Creating a Customer Independent Requirement-MD81

    Hi I'm trying to create a CIR for materials maintained with strategy-40 and 63. Which Requirement Types will be best suited for such strategies and is it mandatory to maintain the requirement type? Further proceeding the document is incomplete while