The correlation issues in OSM
Hi!
There are some questions about correlation in OSM.
Can anyone detail the process of extracting jms message by automation plugins?
It is said in Developer guide: "This property uses the correlation ID parameter, which is configured in the outbound message at the OSM side, to retrieve the JMSCorrelationID of the incoming message. OSM compares the JMSCorrelationID with the correlation ID and associates the two messages if the respective values match."
As I understd automation plugin in some automation task receives only that messages, which comes with same correlationID or property containig correlationID which was assigned by other automation sender plugin in the same automation task?
My experiments shows that external event receiver automation in one automation task cannot receive messages from other automation task.
Are there means to implement events exchange between parallel tasks in the same order?
Best regards!
Sergey
Hi Sergey,
AutomationContext & CorrelationID are linked together. Whenever a message comes to queue which is listening by automationplugin, it tries to find the AutomationContext using that correlationID and once finds a match, it assigns the incoming message to that particular automationtask which is waiting.
There are no means to implement events exchange between parallel tasks in the same order. Suggestion is to change your workflow.
Thanks
Naveen Jabade
IBM
Similar Messages
-
Correlation issue due to async receive with sync/async bridge
Hi,
I have an Integration process (PI 7.0), which consists of sync/async bridge.
One of the step in the process is async receive.
To avoid any issue with correlation, i placed the whole process (except start and end) into a block and assigned a local correlation to it.
The Sync receive in sync/async bridge will activate the correlation and one of the async receive step in the process will use that correlation.
Normally it worked fine. But during one execution (just for testing), the async receive step did not take input to the process, and so the process execution replied "Timeout in Pipeline". But thereafter i cannot execute the process successfully, even when async takes the input.
And in the BPE monitoring, in workflow log, the process Instances are still "In Progress".
Do we have any way to stop these processes and unlink any possible correlation related to them?Hi,
A local correlation is only valid for the block for which it is defined. Once the block has been processed, the correlation is no longer active.
If the validity of a correlation is not restricted correctly, the following problems can occur:
¡ Messages that satisfy an active correlation are continued to be assigned to a running integration process. The integration process no longer processes the messages because no processing steps are waiting for the messages.
¡ Messages that satisfy an active correlation are continued to be assigned to a running integration process, instead of starting a new integration process.
You can avoid these problems and make it easier to follow how messages are processed by restricting correlations correctly to the required block.
Please check the local correlations for it
With SXMB_MONI_BPE you can monitor these instances.
But to kill it you need to use tcode SWWL. You can go to SXMB_ADM_BPE to check the BPM related settings.
Thanks
swarup
Edited by: Swarup Sawant on May 31, 2008 1:40 AM -
Unable to activate or deactivate the Correlation policy
After creating a correlation policy with complex conditions, I am unable to activate or deactivate the policy.
Reason
This issue occurs when a complex condition is created, and one of the sub conditions is deleted. In the case below, the correlation rule is missing a sub condition that would have been used together with the Rule Message condition, but it has been deleted. The following screenshot shows a similar situation.
Workaround
The workaround of this issue is to delete the "indented" broken complex condition, and adding it back to the rule as a regular condition. -
I'm using a mid 2014 13" rmbp. I reinstall the Yosemite due to the wifi issue, when finished, the iMovie was not installed, I try to download it from app store, but it's not free. How can I get iMovie back?
It's something to do with the main user account (not iTunes account) on my Mac because I logged in with another account and it downloaded fine, I installed it on the HDD and even though the date in App Store was 16th October 2014, it is the full installer of 10.10.2.
To try to resolve this problem, I have copied the installer app elsewhere and deleted it but App Store still will not allow me to download it with my main user account yet just allowed me to update iTunes.
I had a brainwave last night that it might have been related to me changing the default downloads folder to one not on my boot drive (to save disk space on my main boot drive) but having changed it back, tried again, rebooted and tried yet again, deleted my App Store preferences. nothing has worked. -
What I have to do to correct the following problems with Pages app. For iPad:
Hesitates to display results of typing, some times for 5-6 characters;
Very slow in opening files;
Before opening of a specific file displays message: DOCUMENT DETAILS. SOME CHANGES WERE MADE TO YOUR DOCUMENT. SOME IMAGES ARE MISSING BECAUSE THEY WERE DELETED FROM YOUR DOCUMENT. We'll, nothing is missing. But it takes forever to open this file. The previous issue of Pages worked very good. But they would not let me to go back to it. Please, help!Tmobile did the exact same thing to me. So that is customer service at work in general. Nice try though lol.
To the OP
I see you said You paid for shipping, did you Insure it? Claim insurance on it. If you did not, It may not be Verizon or your fault in the sense of the phone not making it to the warehouse. There are people out in the postal world that will steal phones that are not insured. It could have been a Verizon employee, i suppose.
But, if this was to be a bought in court, if you shipped it with out insurance, sadly your at fault.
Do you still have the Serial number of your old phone? If so, you should be able to track where your phone is (if it is reported as a defect/damaged) If so, you may be able to use that as proof. If it does not show up as a defect or what ever they determine use as a loss, then you know it did not make it to the warehouse to be checked in. I would suspect Apple or Verizon could tell you what the Serial number came up as. -
For the second time (I've been to the Genius Bar already once with this) my Wifi isn't working. They gave me a new iphone last time, but the new one has the same issue as the old one, I'm guessing. I've tried resetting the network but that doesn't work.
I see others have this issue too.
If this is a hardware problem why doesn't Apple fix it? Or do I just have to wait another year for another upgrade?
Currently it's not costing me anything - yet - because I've got the Apple Warranty but this is totally frustating!!! I bought the original phone (which has been replaced in July 2012. The new phone (without working Wifi) is a month old.
Will try Restore via ITunes before (I will invariably) have to return to the Genius Bar for another Iphone 4S unless someone has an ingenius solution here?..?sematson wrote:
If this is a hardware problem why doesn't Apple fix it? Or do I just have to wait another year for another upgrade?
For what reason, other than making yourself look foolish, would you ask questions that we users could not possibly answer as we're NOT Apple?
Basics from the manual are restart, reset, restore from backup, restore as NEW. Nothing more "ingenius" to suggest than these steps that Apple has outlined in the manual. If these steps don't work, then go back to the Apple store. -
I am trying to install MasterCollection_CS6_LS16. When I double click the install file I get this error message: We've encountered the following issues. Installation on case-sensitive volumes is not supported. Please choose a different volume for installation. What does that mean? How should I proceed?
Hey iraravitz,
Could you please let me know what version of OS are working on.
You might receive this error when you attempt to install on a drive with the HFS+ Case Sensitive file system, which is not supported for installation of Adobe Creative Suite 6.
So, please try installing on a drive that has been formatted with a supported file system.
You might refer the KB doc link mentioned below for the same:
Error "Case-sensitive drives not supported" or similar install error | Mac OS
Let me know if this helps.
Regards,
Anubha -
I upgraded to version 4 last week and find it extremely slow compared to the previous version - like so slow that some pages do not even load. I have downloaded and gone back to version 3.6.17 and everything is back to the normal I have known for years with Firefox and it is really fast again...so now I know that there is nothing wrong with my computer and that the supposedly very very fast version 4 is much much slower than the previous version 3.6...so what gives? I'm not keen on going back to the new improved version 4, though I know it will not be supported soon...anyone else having the same issue?
Having the exact same problem here.
-Mac OSX
-3.6 worked great
-I tried the 4 beta, got rid of it because it was so slow
-When it upgraded to 4 is VERY slow and freezes often
-Appears especially slow on sites with flash (ie http://www.bbc.co.uk/news) -
I don't know if this is the right section but I experience the following issue with Adobe Acrobat Pro XI installed on Windows 8.1. When I start Acrobat the related window opens normally but, after some scroll up and down along the document, it blocks, Acrobat doesn't respond to any command I can give and, in place of the pointer arrow, a vertical bar, as the one of the text editor appears. The only way I can stop Acrobat is by means of the task manager. I tried to de-install and the re- install Acrobat but the behaviour is always the same. What can I do??
Have you opened Acrobat and gone to Help>Updates to get an updated install?
-
How Can I Fix The Graphics Issue...?
After having my computer for a few years, it started getting an artifact around the mouse, and when it did that, everything was frozen, key commands didn't work, and I would have to manually shut it down.
I went to the Apple store, and they couldn't get it to boot, even with their external drive. The guy at the Apple store took my computer into the back, and a few minutes later, brought it out. He said he had gotten it to boot, without their external drive, but wouldn't tell me how. He said there was a problem with my video card. He said $400 to fix it.
Not having the money, I left. A friend told me how to safe boot the computer, and now it will turn on, despite the artifacts and graphics problems. Why didn't the guy at the store tell me this? It's obviously the only way he could have booted it. He wanted to charge me $50 to back up my data, when I could do it myself under the safe boot.
The thing is, when using safe boot, I have no audio or video functionality- the camera doesn't work, the speakers don't work, and the disc drive doesn't work. I've read up on this, and it's an issue for a lot of macs, from about the time I bought mine. They say there was too much glue used somewhere in the computer (2 or 3 little chips with too much glue or something), and over time the glue/ adhesive gets too hot, and spreads to other areas and ruins them (ie. my graphics card). That's my simplified understanding of the issue, anyway.
Why won't Apple replace it for me? They won't let me trade it in, because it won't boot right, but this is an issue they were aware of at some point. I spent a lot of money on this laptop and it's really nothing more than a digital typewriter now.
Does anyone know how I can fix the graphics issue? Aside from shelling out the money I don't have for something that's really Apple's fault? It'd be really nice to be able to, I don't know, watch things and listen to things. That was the whole reason I got this thing.
Thanks for any ideas, feedback, sympathy, empathy or other comments.
<Edited by Moderator>Ok, you are right, maybe I don't know it for a fact . . . but from all the things I read in various forums, there was a batch (or something similar) of macs (the exact kind I have) that did have too much glue on some parts, and it caused all sorts of problems for different people, most of those problems being with the graphics card. Apparently the excess glue overheats and leaks out of where it's supposed to stay, and whatever it has the misfortune of getting on goes to pot.
I got very brave, thinking my computer was shot- I opened it, and there was, indeed, crusty glue coming out from under some ... things ... three square chip like things ... and it had seeped onto the edges my graphics card. Having seen the inside of other laptops, I know it was not supposed to look like that no matter how old it is.
This whole issue happened just a few months after my (overpriced, unused) AppleCare expired. Irony?
I did backup all my data and files (no thanks to the Apple people; and on safe boot the disc drive won't work, so I had to borrow my friend's external hard drive for backing up), and did a clean install with the original discs. It was a huge hassle, and when it was finally done, I booted my computer normally. It worked for about 10 minutes before it got artifacts all over and froze, at which point I had to force shut it down. I've tried the clean reinstall a few times, but the problem (I think) is that the glue inside already did the damage, and my graphics card is shot. So, I've been running it on safe boot for months. No music. No video. No disc drive. OH- and the best part- on safe boot, the airport won't work. I can't use wi-fi, and I can't take my laptop anywhere because I'm tethered to a modem. It's the worst thing ever. All of it. It's horribly depressing.
I'm just really frustrated and irritated that this happened, and Apple won't do anything. I do realize they don't HAVE to do anything- buyer beware and whatnot- BUT as a reputable company they should at least let me trade in with the discount or whatever. I didn't have to choose Mac, it was the most expensive computer I looked at- but it has so many awesome functions and things . . . that I can't even use . . .
As a poor college student I don't have the option to get a new computer or have Apple replace any parts in this one, so I just kind of feel like Apple screwed me over. Their fault? Maybe not. Their product? Yes, so they should want to keep me as a future customer. At least I think so.
I guess this isn't quite a question. But I would love more feedback, ideas, anything. Has anyone else had this problem? Can I replace my own video card? Will Apple do anything at all? I love macs but I might never get another one, since this could happen again.
And- unrelated- who changed the title of my post, and how, and why? -
iPhone 6 (iOS 8.1.2) My wife and I were able to log into iCloud when we bought and activated the phones. In the last 2 days, we have not been able to do so. Have reset the password 3 times. Can get into iTunes and iCloud via MacBook Pro. Every attempt to log in via iPhone we get a message saying the password is incorrect. I noticed someone else had a similar problem about 1 hour ago. Apple support's answer did not fix the problem for them.
have you managed to fix that? i'm facing the same issue on iPhone 6 (8.1.3)
-
I just got my Mac Pro repaired from Apple but I am experiencing the same issue: Screen freezes and shows funny rectangular bars. I shut it down manually and when I try to turn it back on it beeps 3 times. I know its the RAM but is there a way I can fix it
If you just got it back and it isn't fixed or something else is wrong with it take it back and have them do the repair correctly.
-
Re complaint for the same issue
Below is the issues that I am facing and I mail to lenovo many times but no response from lenovo care, now the issues are getting worse and worse as jut three to\two days back my lenovo kick get shutdown and stuck on Intel logo and then I go to service center located at Nehru place in new Delhi they open my phone and install new software now I just don't know why to install software they open my phone and from that t\day when my phone reaches to 15% to 10 % battery level phone get blank instantly then I have to plug in the charger to again switch it back , this phone is the lenovo flagship model and I purchased two phone same time both phone get replaced one times but the one phone is working fine and but one phone having this serious issue and when I go to service station they every time says that u have to leave phone for two weeks for at least why the dammn I leave my phone to service center for two weeks just for diagnosing the issue without phone there are lots of trouble I have to face in my daily life please look into this matter , as if this matter not resolve by lenovo as soon as possible I definitely go to file a case against lenovo in consumer court, ---------- Forwarded message ---------- From: Lencare <[email protected]> Date: Mon, Dec 23, 2013 at 5:23 PM Subject: RE: re-complaint about the same issue To: MIDH Care <[email protected]> Cc: "******@gmail.com" <******@gmail.com>, "[email protected]" <[email protected]> Hi Team, Please find the E-Mail below, request you to do the needful. __________________________________________________________ Thanks & Regards, Lenovo Customer Care, India. Please note that any E-Mails with attachments exceeding 10 MB will not reach us due to limitation in the Attachment Size. From: PranjalOctane [mailto******@gmail.com] Sent: Monday, December 23, 2013 12:00 PM To: [email protected]; [email protected]; MIDH Care Subject: re-complaint about the same issue my name is ranjal dutt i purchased lenovo k900 serial number is ****** the issue is that this phone is i am using replaced once just because of the heating and low battery issue , now after replacing and using it after some days i am facing the problems again , the same with some new ones the problems are listed below: 1.low battery backup 2.heating issue 3.hang 4.screen flicker i am using this phone and i am getting only 5 to 6 six hrs of battery backup , and with heating issue , when i am browsing internet or playing any kinda video it get heats so much and battery drains so fast for me it is pain when i ma in need of clicking some pics or surf to internet as there is very low battery backup , my friend also brought this phone with me on same day they also have this same issue but after replacing his phone the problem get solved , kindly see on my issue as if this issues persists again and again how can we refer lenovo phones to other persons ******
Moderator note: personal information and serial number removed for member's protection.why no body here fo replying my issue..........is lenovo is such a bad company
-
Can anyone tell me if the majority of the wifi issues are due to 10.4.8?
i.e., have many tested reverting back to .6 or .5 to see if the issue is/was resident then? Is that a possible temporary fix to the issues noted all over this board?
In case anyone wonders, my issues are similar to most others...BOTH my wifes 2.16 Core Duo and my new 2.33 C2Duo are experiencing the same issues. While at school, she cannot see any of the numerous nearby networks. I JUST got her to switch to a mac, and now this. Her old HP laptop saw about 6 or more wifi's nearby before, and most importantly her schools wifi connection. But now that she is on the mac, nothing. SOMETIMES, and I do mean only rarely a few networks will surface, but then disappear again. I decided to take my 2.33 C2Duo down there and see if the situation was the same with me...it was/is. Every now and then I might see a network or two, but not the shcools.
This in addition to dropping off my own home wifi over and over again also. I will get a connection and surf away, and then I notice that the airport icon has lost connection. I click the icon and there is my network, avail as ever, so I select it and surf again...same issue with her laptop and my step-fathers 17 inch Core Duo. We all experience the same dropped airport connection. And I can tell you it has nothing to do with idle time or sleeping. I can be surfing along and sometimes if I pause for less than a minute, the connection is lost. Btw, I also just got my step-father to switch, and while in general he is VERY happy, this is a knock-out blow to the saying "It just works." Uhm, nope it doesn't.
I have tried nearly every "trick" and tech troubleshooting idea I have come across here on the boards...I used to be a Mac tech in CA for about 5 years, working for ABC and Disney, so I think I can count myself amongst the more knowledgable Mac users out there.
So, to sum up again, can anyone tell me if they are having these issues with a version previous to 10.4.8?
p.s. BTW, I just saw the release of some EFI updates for the Mac line-up...I will update my wifes machine and let you know if anything gets better, but my 2.33 says that this update is not for this machine/isn't needed...so this EFI update doesn't resolve anything for me.
Thanks...!
MacBook Pro • 2.33 • 120GB/5400RPM • 2GB Ram Mac OS X (10.4.8) Duo Mac Mini w/2GB Ram, 5g 60gb iPod...I had issues in 10.4.7 as well as 10.4.8.
My problems occurred at the beginning of 10.4.8, then many users brought light to me using WEP, which was not working that great. I changed my connections to WPA2 and my problem has disappeared. If my problem didn't resolve the way it did, I would have mentioned it the next time I visited an apple store.
The bottom line is that assumptions, complaining, and self diagnostics don't get many people very far and bringing the problem to apple helps them know the incidence of this problem, and helps them develop a reliable solution.
Though some users have reported the "cold shoulder" when reporting Airport problems to apple... I hope you weren't one of them. -
getting the error message"your apple ID has been disabled" . I reset my ID password last night and am still having the same issue.
If you are still unable to access your account after resetting your password, you will need to contact iTunes Store Customer Support via http://www.apple.com/support/itunes/contact/
Maybe you are looking for
-
I am having a problem partitioning an external hard drive with data in it. When I select the partition, everything is grayed out. I can't add a a partition for some reason. When I asked this question to other people, they told me to select my part
-
How to display library folder permanently in mountain lion
How to display library folder pemanently in Mountain Lion 10.8.2
-
Migrate Collections from CS6/Windows XP to CC/Windows 7
Hi, How do I migrate Collections from CS6 in Windows XP to CC on Windows 7? I found the path in XP, C:\Documents and Settings\User\Application Data\Adobe\Bridge CS6\Collections, but where do I move them to in Windows 7? Thanks in advance! Steve
-
TIME_MANAGER_INFO 1 hour earlier than SYSDATE?
When one of our processes fails and places the message back on the queue to be retried in 5 minutes time the TIME_MANAGER_INFO is 1 hour + the delay time less than SYSDATE in the database. For example, if our message fails at 11am and the delay perio
-
Noob alert: can i combine two albums in itunes library?
haven't been able to figure out on my own if this is possible... basically, i imported an album, which was split by itunes into 4 separate albums (each containing a few songs from the album). can i somehow combine this all into just one album (since