The detail log (mapping, payload) in BPM
This is my scenario: SAP <-> XI <-> JDBC, because I need to use for-each component, so I used BPM and I used multiline component too.
Current status is, I can see the detail message mapping and payload through SXMB_MONI, but I can only see the message between XI and SAP or XI and JDBC.
Is it possible to see the detail message mapping and payload in BPM? I.e. I want to see the mapping and payload before/after the transform component (to see the mapping for the multiline and current line message.)
Another problem is, I can call XI and I can query JDBC (I use SXMB_MONI to see the message payload.) But finally the message is not returned to SAP. I click the "PE" from SXMB_MONI and I see the BPM graph, it shows a error (red) in the graph, but where could I see the detail log ? I double click the error component, but I cannot see any meaningful message in it.
hi,
you can monitor every step of a BPM
https://websmp201.sap-ag.de/~sapdownload/011000358700003141152005E/HowToMonitorccBPM.pdf
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>
Similar Messages
-
Where i see the detailed log of cache referesh error????????
in sxi_cache when i do full refresh...i get error in cache refresh....
where can i see the detailed log of that errorIn SXI_Cache you mainly check the status of the Integration proceess.0 means the IP is fine and 99 means there is a cache issue.
Also check this
https://websmp202.sap-ag.de/~sapdownload/011000358700003163902004E/HowTo_handle_XI_30_Caches.pdf
Regards,
Prateek -
Where to find the detailed log for Repository/Directory
Hi all,
I have configured some configuration objects both in Integration Repository and Directory. But facing some problems like
activating the changes, partially missing configuration etc. For such problems, where we can find the logs to analyze the issue in repository & directory.
Please help me in finding the location for the logs of IR & ID,
Regards,
Sooryaactivating the changes
The Change list automatically gets populated with the objects which need activation....does it not help?
partially missing configuration
If you miss mandatory configuration (like target URL in SOAP channel) then an error message will be shown there itself...while activating....logs about the same may not be avilable....we have ot checki it manually.
Regards,
Abhishek. -
How to view the detailed data from the Planing cube.
Hi friends , we are having one planning cube which end use will enter the data in to this cube using query input layout.
End user want to view the data which he has loaded in to the realtime cube to cross verify.
I try to build this through the query designer on real time cube but iam getting aggrigated values. i need the detailed log , how to achieve this . There is no DSO to develop the query. do i need to use the planning moduler for this or any other alternative.
Could any one has the solution for this.
Regards,
Sruthi.Hi , i put all the characteristics in the drill down bu iam not getting the detailed log, as you know iam getting the aggrigated summ of the values are displaying.
For Ex user will enter the below mentioned values in to Real time cube
Fiscal Period Customer Values Currency
006.2008 20000 $6 USD
006.2008 20001 $6 USD
006.2008 20010 $6 USD
above values are in the cube but when u try to display those valus using the query designed you will get sum of $18 , my requirement is to display table as it shown above.
Pls help me on this.
Sruthi. -
Windows 2008 member server, repeating event 4625 in the security log
Hello,
I'm having an issue with a member server on our 2008 domain, security log is filling up with event 4625, here are the details:
Log Name: Security
Source: Microsoft-Windows-Security-Auditing
Date: 4/23/2014 2:04:42 PM
Event ID: 4625
Task Category: Logon
Level: Information
Keywords: Audit Failure
User: N/A
Computer: my.member.server
Description:
An account failed to log on.
Subject:
Security ID: NULL SID
Account Name: -
Account Domain: -
Logon ID: 0x0
Logon Type: 3
Account For Which Logon Failed:
Security ID: NULL SID
Account Name:
Account Domain:
Failure Information:
Failure Reason: Unknown user name or bad password.
Status: 0xc000006d
Sub Status: 0xc000006a
Process Information:
Caller Process ID: 0x0
Caller Process Name: -
Network Information:
Workstation Name: -
Source Network Address: 10.0.0.115
Source Port: 51366
Detailed Authentication Information:
Logon Process: Kerberos
Authentication Package: Kerberos
Transited Services: -
Package Name (NTLM only): -
Key Length: 0
This event is generated when a logon request fails. It is generated on the computer where access was attempted.
The Subject fields indicate the account on the local system which requested the logon. This is most commonly a service such as the Server service, or a local process such as Winlogon.exe or Services.exe.
The Logon Type field indicates the kind of logon that was requested. The most common types are 2 (interactive) and 3 (network).
The Process Information fields indicate which account and process on the system requested the logon.
The Network Information fields indicate where a remote logon request originated. Workstation name is not always available and may be left blank in some cases.
The authentication information fields provide detailed information about this specific logon request.
- Transited services indicate which intermediate services have participated in this logon request.
- Package name indicates which sub-protocol was used among the NTLM protocols.
- Key length indicates the length of the generated session key. This will be 0 if no session key was requested.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Security-Auditing" Guid="{54849625-5478-4994-a5ba-3e3b0328c30d}" />
<EventID>4625</EventID>
<Version>0</Version>
<Level>0</Level>
<Task>12544</Task>
<Opcode>0</Opcode>
<Keywords>0x8010000000000000</Keywords>
<TimeCreated SystemTime="2014-04-23T18:04:42.197Z" />
<EventRecordID>99893119</EventRecordID>
<Correlation />
<Execution ProcessID="744" ThreadID="844" />
<Channel>Security</Channel>
<Computer>KLINEWEB.kline.local</Computer>
<Security />
</System>
<EventData>
<Data Name="SubjectUserSid">S-1-0-0</Data>
<Data Name="SubjectUserName">-</Data>
<Data Name="SubjectDomainName">-</Data>
<Data Name="SubjectLogonId">0x0</Data>
<Data Name="TargetUserSid">S-1-0-0</Data>
<Data Name="TargetUserName">
</Data>
<Data Name="TargetDomainName">
</Data>
<Data Name="Status">0xc000006d</Data>
<Data Name="FailureReason">%%2313</Data>
<Data Name="SubStatus">0xc000006a</Data>
<Data Name="LogonType">3</Data>
<Data Name="LogonProcessName">Kerberos</Data>
<Data Name="AuthenticationPackageName">Kerberos</Data>
<Data Name="WorkstationName">-</Data>
<Data Name="TransmittedServices">-</Data>
<Data Name="LmPackageName">-</Data>
<Data Name="KeyLength">0</Data>
<Data Name="ProcessId">0x0</Data>
<Data Name="ProcessName">-</Data>
<Data Name="IpAddress">10.0.0.115</Data>
<Data Name="IpPort">51366</Data>
</EventData>
</Event>
The IP address that appears in source network address all belong to VPN clients. And it looks like its only happening with 4-5 IPs, all of which are VPN clients. These clients shouldn't be connecting to anything on this server, which is why its puzzling.
Our DC is Windows 2008 and the VPN server is another member server on the domain. I suspect the issue is at the client PCs since there are many other VPN clients connected that don't generate the event ID.
Can anyone tell what the issue might be?
Thanks.Hi Rayminette,
There are multiple login sources that could possibly be generating the errors:
FTP logins - check your FTP log to see if login failures are showing up at the same time.
Logins via Basic Authentication over http or https (simple, but possibly dangerous, way to password-protect a web site).
ASP scripts.
This logon type 8 indicates a network logon like logon type 3 but where the password was sent over the network in the clear text. Windows server doesn’t allow connection to shared file or printers with clear text authentication. The only situation
I’m aware of are logons from within an ASP script using the ADVAPI or when a user logs on to IIS using IIS’s basic authentication mode. In both cases the logon process in the event’s description will list advapi. Basic authentication is only dangerous
if it isn’t wrapped inside an SSL session (i.e. https). As far as logons generated by an ASP, script remember that embedding passwords in source code is a bad practice for maintenance purposes as well as the risk that someone malicious will view the source
code and thereby gain the password.
Reference from:
What is the source of thousands of 4625 Logon Failure errors with Logon Type 8 (NetworkCleartext)?
I hope this helps. -
Hi All,
I would like to know the flow when mapping is inside BPM and when it is outside BPM.
And also about the configuration steps in either cases.
Thanks,
VishalHi,
Try to avoid using transformation step in BPM, executing mapping program in business process engine not advisable.
Try to execute the mapping program in Interface determination level, in this case mapping will execute in Integration engine.
Flow :
Sender Communication Channel pick ups the message and send it to Adapter engine ,from there internal XI adapter will take the message from AE and send it IE,when you use BPM ,BPE engine come in to picture to execute/process the message, if you use Transformation step , then mapping program will be executed in Business Process Engine.
After execution of mapping program in BPEN then message will be send to IE, from there to AE.
Outbound service Interface---sender abstract interface-receiver abstract interfaceinbound interface (some times).
AE-IEBPEIEAE
Regards,
Raj -
Missing Messages in Detail Log
BPC 5.1
In comparing the data manager detail logs of two packages, I noticed that the Append package provides a [Messages] section in the Detail Log but the Append into Fact Table package does not. I am not able to determine what causes this. What property, variable, or configuration setting controls the display of messages?
Thanks,
--BrentHi,
In order to have detailed information into the log, you have to add DEBUG(ON) instruction at the beginning of ModifyScript variable script code.
Best regards,
Mihaela -
Detailed log for external programs is not found
Hi Guys,
I have scheduled many SAP Jobs for which the steps are external programs ( Basically Unix Scripts ).
Even though they are completing successfully, and I can see the logs like below, But it is not in detail. Both the detailed log screen we used to get in SAP, and the recent log screen in Redwood are provided here. Can you please suggest what I need to do to get the detailed logs in Redwood?
The SAP detailed Logs:
The Recent redwood logs.
BR
MadhuHey Madhu,
When you execute an exernal program that is already defined in SAP, from Redwood, it is still an SAP job for Redwood (not unix job), hence Redwood cannot obtain that details.
the best way to do this is to install a platform agent in the Unix system and schedule the script directly from Redwood instead of through SAP.
How/Where did you get the detailed log screen in SAP. Can you please provide the steps to reproduce?
What you have now:
Redwood-->SAP-->Unix
What you should have:
Redwood-->Unix.
thanks
Nanda -
DB12 Log:: Could not read detail log aegydpas.cds
Dear Experts,
Last week i updated the BRTOOLS to 7.10 (41) in our Dev system and from that time the Redo Log Back up is getting failed.
I referred the link::
http://forums.sdn.sap.com/thread.jspa?threadID=1294155
But still my Redolog back up is getting failed.
When i try to open the detailed log using db12 it says::
Could not read detail log aegydpas.cds
Current Files Details are::
-rwxr-xr-x 1 pipadm sapsys 2096665 Aug 09 23:39 libsbt.o
-rwxr-xr-x 1 pipadm sapsys 6588322 Aug 10 01:11 brarchive
-rwsr-xr-x 1 orapip sapsys 6761531 Aug 10 01:12 brbackup
-rwsrwxr-x 1 pipadm sapsys 8672269 Aug 10 01:13 brconnect
-rwxr-xr-x 1 pipadm sapsys 7344219 Aug 10 01:14 brrecover
-rwxr-xr-x 1 pipadm sapsys 2753742 Aug 10 01:14 brrestore
-rwxr-xr-x 1 pipadm sapsys 9193124 Aug 10 01:15 brspace
-rwsrwxr-x 1 pipadm sapsys 3487223 Aug 10 01:16 brtools
-rw-rr 1 pipadm sapsys 334 Aug 10 01:16 dbatoolsora.mf
-rw-rr 1 pipadm sapsys 150 Aug 10 01:16 dbatoolsora.lst
lrwxrwxrwx 1 root system 35 Aug 20 13:29 backfm -> /usr/tivoli/tsm/tdp_r3/ora64/backfm
lrwxrwxrwx 1 root system 36 Aug 20 13:29 backint -> /usr/tivoli/tsm/tdp_r3/ora64/backint
-rw-rr 1 pipadm sapsys 1428 Sep 30 18:27 dev_sapstart
drwxr-x--- 2 pipadm sapsys 4096 Oct 04 15:19 brtool7
-rw-rr 1 pipadm sapsys 15848554 Oct 04 15:26 DBATL710O10_41-10004181.SAR
Kindly let us know how to proceed with this.
Regards,
SanjeevDo we need to run any Scripts after upgrading the BR tools???
Current::
pipadm> pwd
/oracle/PIP
pipadm> ls -ltr
total 264
drwxr-xr-x 2 orapip dba 256 Aug 02 2010 lost+found
drwxr-xr-x 4 orapip dba 256 Sep 10 2010 saptrace
drwxr-xr-x 4 orapip dba 256 Sep 10 2010 origlogA
drwxr-xr-x 4 orapip dba 256 Sep 10 2010 origlogB
drwxr-xr-x 3 orapip dba 256 Sep 10 2010 mirrlogA
drwxr-xr-x 3 orapip dba 256 Sep 10 2010 mirrlogB
drwxr-xr-x 13 orapip dba 4096 Sep 11 2010 sapdata1
drwxr-xr-x 10 orapip dba 256 Sep 11 2010 sapdata4
drwxr-xr-x 14 orapip dba 4096 Sep 11 2010 sapdata2
drwxrwxrwx 12 orapip dba 4096 Sep 11 2010 sapdata5
drwxr-xr-x 3 orapip dba 256 Sep 12 2010 sapdata8
-rw-rr 1 orapip sapsys 895 Oct 13 2010 LASVerify.pse
drwxr-xr-x 18 orapip dba 4096 Nov 09 2010 sapdata3
drwxr-xr-x 70 orapip dba 4096 Nov 10 2010 102_64
drwxr-xr-x 15 orapip dba 4096 Dec 28 2010 sapdata7
drwxr-xr-x 45 orapip dba 4096 Jan 15 2011 sapreorg
drwxr-xr-x 31 orapip dba 4096 Jan 15 2011 sapdata6
drwxr-xr-x 2 orapip dba 12288 Oct 03 21:00 sapcheck
drwxr-xr-x 2 orapip dba 24576 Oct 05 19:41 saparch
drwxr-xr-x 3 orapip dba 28672 Oct 07 12:18 oraarch
drwxr-xr-x 3 orapip dba 28672 Oct 07 15:00 sapbackuppipadm> pwd
/oracle/PIP
pipadm> -
Hi Experts,
during a data upload with datamanager the upload ends with an error but the detail log is completely empty, why this?
maybe some log table full?
tks all
MikeDo you mean upload of a file from a source into BPC webfolder or do you mean import data from a file into BPC?
Upload doesn't have a log because it is a pure transfer of a file from a location to other.
It can succeed or not.
If we are speaking about import of data into BPC the log is empty in case if it was a fatal error and OsoftDMServer component crash.
What version of SAP BPC do you have?
I remember that OsoftDMServer COM+ component has a problem with memory leak unti SAP BPC 7.0 SP6.
Regards
Sorin Radulescu -
I have created an RDL file programatically. When I execute the code I get the error as mentioned below:
Error: Sub report cannot be shown.
An internal error occurred on the report server. See the error log for more details. (rsInternalError)
When I copy and paste the code of RDL file into new RDL file and try to preview the output I get correct result.
Note: The new RDL file does not give any error if the output is seen using preview tab but it gives the error only when executed from report viewer or from internet explorer.
Any Suggestion/feedback is highly appreciated.
Thank You.
The code of the sample RDL is shown below:
<?xml version="1.0" encoding="utf-8"?>
<Report xmlns="http://schemas.microsoft.com/sqlserver/reporting/2005/01/reportdefinition" xmlns:rd="http://schemas.microsoft.com/SQLServer/reporting/reportdesigner">
<DataSources>
<DataSource Name="DataSource1">
<DataSourceReference>DataSource1</DataSourceReference>
<rd:DataSourceID>fe4806ee-0358-4a87-b764-ac5de049545e</rd:DataSourceID>
</DataSource>
</DataSources>
<BottomMargin>0.25in</BottomMargin>
<RightMargin>0.25in</RightMargin>
<PageWidth>11in</PageWidth>
<ReportParameters>
<ReportParameter Name="machine_id">
<DataType>String</DataType>
<Prompt>machine_id</Prompt>
</ReportParameter>
<ReportParameter Name="from_date">
<DataType>String</DataType>
<AllowBlank>true</AllowBlank>
<Prompt>From Date</Prompt>
</ReportParameter>
<ReportParameter Name="to_date">
<DataType>String</DataType>
<AllowBlank>true</AllowBlank>
<Prompt>To Date</Prompt>
</ReportParameter>
</ReportParameters>
<rd:DrawGrid>true</rd:DrawGrid>
<InteractiveWidth>8.5in</InteractiveWidth>
<rd:SnapToGrid>true</rd:SnapToGrid>
<Body>
<ReportItems>
<Table Name="table1">
<DataSetName>Main_Report</DataSetName>
<TableGroups>
<TableGroup>
<Header>
<TableRows>
<TableRow>
<TableCells>
<TableCell>
<ReportItems>
<Textbox Name="textbox2">
<rd:DefaultName>textbox2</rd:DefaultName>
<ZIndex>1</ZIndex>
<Style>
<TextAlign>Left</TextAlign>
<PaddingLeft>2pt</PaddingLeft>
<PaddingBottom>2pt</PaddingBottom>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
</Style>
<CanGrow>true</CanGrow>
<Value>=Fields!syscode.Value</Value>
</Textbox>
</ReportItems>
</TableCell>
</TableCells>
<Height>0.25in</Height>
</TableRow>
</TableRows>
<RepeatOnNewPage>true</RepeatOnNewPage>
</Header>
<Grouping Name="table1_Group1">
<PageBreakAtEnd>true</PageBreakAtEnd>
<GroupExpressions>
<GroupExpression>=Fields!syscode.Value</GroupExpression>
</GroupExpressions>
</Grouping>
</TableGroup>
</TableGroups>
<Details>
<TableRows>
<TableRow>
<TableCells>
<TableCell>
<ReportItems>
<Subreport Name="subreport1">
<Parameters>
<Parameter Name="machine_id">
<Value>=Fields!machine_ip.Value</Value>
</Parameter>
<Parameter Name="syscode">
<Value>=Fields!syscode.Value</Value>
</Parameter>
<Parameter Name="from_date">
<Value>=Parameters!from_date.Value</Value>
</Parameter>
<Parameter Name="to_date">
<Value>=Parameters!to_date.Value</Value>
</Parameter>
</Parameters>
<ReportName>Holding_Summary_Multi_Period</ReportName>
</Subreport>
</ReportItems>
</TableCell>
</TableCells>
<Height>0.25in</Height>
</TableRow>
</TableRows>
</Details>
<TableColumns>
<TableColumn>
<Width>10.5in</Width>
</TableColumn>
</TableColumns>
<Height>0.5in</Height>
</Table>
</ReportItems>
<Height>0.75in</Height>
</Body>
<rd:ReportID>d0a1293a-e98c-4f75-9597-03426d2e7218</rd:ReportID>
<LeftMargin>0.25in</LeftMargin>
<DataSets>
<DataSet Name="Main_Report">
<Query>
<rd:UseGenericDesigner>true</rd:UseGenericDesigner>
<CommandText>select account_syscode as syscode , 'display Name' as display_name , * from mars_customer_list
where machine_ip = @machine_id</CommandText>
<QueryParameters>
<QueryParameter Name="@machine_id">
<Value>=Parameters!machine_id.Value</Value>
</QueryParameter>
</QueryParameters>
<DataSourceName>DataSource1</DataSourceName>
</Query>
<Fields>
<Field Name="syscode">
<rd:TypeName>System.Int64</rd:TypeName>
<DataField>syscode</DataField>
</Field>
<Field Name="display_name">
<rd:TypeName>System.String</rd:TypeName>
<DataField>display_name</DataField>
</Field>
<Field Name="customer_syscode">
<rd:TypeName>System.Int64</rd:TypeName>
<DataField>customer_syscode</DataField>
</Field>
<Field Name="account_syscode">
<rd:TypeName>System.Int64</rd:TypeName>
<DataField>account_syscode</DataField>
</Field>
<Field Name="machine_ip">
<rd:TypeName>System.String</rd:TypeName>
<DataField>machine_ip</DataField>
</Field>
</Fields>
</DataSet>
</DataSets>
<Code>Shared offset As Integer
Public Function GetPN(reset As Boolean, pagenumber As Integer) As Integer
If reset
offset = pagenumber - 1
End If
Return pagenumber - offset
End Function
</Code>
<Width>10.5in</Width>
<InteractiveHeight>11in</InteractiveHeight>
<Language>en-US</Language>
<PageFooter>
<ReportItems>
<Image Name="image1">
<Sizing>Fit</Sizing>
<Left>8.875in</Left>
<MIMEType />
<Width>1.5in</Width>
<Source>External</Source>
<Style />
<Value>bottom_right_logo.gif</Value>
</Image>
</ReportItems>
<Height>0.5in</Height>
<PrintOnLastPage>true</PrintOnLastPage>
<PrintOnFirstPage>true</PrintOnFirstPage>
</PageFooter>
<TopMargin>0.5in</TopMargin>
<PageHeight>8.5in</PageHeight>
</Report>i created a SSRS report with shared datasets and uploaded rdl files and rsd files , while trying to map rdl file with data sets i am getting an error
when i click on manage for .rdl file, its throwing error , as
"An internal error occurred on the report server. See the error log for more details. (rsInternalError)
Object reference not set to an instance of an object.
please help me with this -
CS4: "Critical errors were found in setup. Please see the setup log for details" !!
I am using Win XP Pro SP3. I have CS3 installed, and successfully installed Dreamweaver, Fireworks and Flash from CS4 Design Premium. Then I successfully uninstalled DW, FW and FL CS3.
When I tried to open a SWF in Illustrator it failed to open, and then I tried to create a really simple SWF (a rectangle) by exporting from Illustrator and tried to open that and it also failed. Whenever I tried to open or place ANY SWF into Illustrator I get a "file *** is in an unknown format and cannot be opened" error.
I decided there must be a corrupt file, maybe the upgrade must have affected some Illustrator files, so I tried to repair the CS3 installation. After over 2 hours of INTENSE FRUSTRATION having to constantly switch CS3 and CS4 disks many MANY times, the installation failed, listing "common files" that were missing from non-existent folders such as "C:\Documents and Settings\[username]\Desktop\Adobe CS4\Fireworks CS4\payloads\etc
When I tried to repair the CS4 installation after loading all the profile settings it errors before the installation window comes up, with "Critical errors were found in setup. Please see the setup log for details". Then it shuts down the installer. I then tried to do a system restore and system restore failed on all restore points!
Please help:
1. Where is "the setup log"?
2. Will creating and populating the folders mentioned in the failed CS3 installation from the CS4 disk allow it to work?
3. How can I uninstall CS4 if I can't even get to the installation window?
4. Has Adobe just DESTROYED MY REGISTRY BEYOND REPAIR!!!???im haveing a huge irritation useing illustrator cs4 live paint bucket because i can use everything else apart from the paint bucket which should be the easyiest tool to use sometimes it works with the white arrow sometimes it doesnt i sometimes get this below message
the selection contains objects that cannot be converted. live paint groups can only contain paths and compound paths. clipping paths are not allowed
the lines which i have drawn are connected which i believe have to be in order to use the paint bucket and i have no clipping paths so i am am baffled
i presume it is because the line is set to 0.01 it seems the live paint bucket wont notice thin lines, but i tried makeing the line thicker so i could use the paint bucket and it still doesnt work. -
Not able to get the Aduit log details through webservices
Hi Team,
I am trying to get the audit log details using according to Michal's PO/PI tips: Audit Logs from a native WS - new feature but i am getting following result
i have used
key = new MessageKey(msg.getMessageId(), msg.getMessageDirection()); -------------> to generate the message key
generated value: 02766515-d1fe-11e3-b52d-0000008030fe(OUTBOUND)
and i have placed that value in the messagekey as shown above but i am not getting any output and it is returned saying fault String please some buddy help me in solving the problem.
Thanks in advance.
Regards,
Avinash.If it just for a particular message then another simple solution is to open the message and go to details in pimon.
http://wiki.scn.sap.com/wiki/display/PIS/AdapterMessageMonitoringVi+service+and+it%27s+methods -
Hi all,
I have TFS2012 and run several projects.
We encounterwed with such an error while using Build server.
Overall Build Process
Initial Property Values
AgentSettings = Use agent where Name=* and Tags is empty; Max Wait Time: 04:00:00
BinariesSubdirectory =
ConfigurationFolderPath = $/CTI/DEV/DEV_INT/source/TeamBuildTypes/EPhone_DIT
DoNotDownloadBuildType = False
LogFilePerProject = False
MSBuildArguments =
MSBuildPlatform = Auto
RecursionType = OneLevel
SourcesSubdirectory =
TestResultsSubdirectory =
Verbosity = Diagnostic
00:00
Get the Build
00:00
Update Build Number
Initial Property Values
BuildNumberFormat = $(BuildDefinitionName)_$(Date:yyyyMMdd)$(Rev:.r)
Final Property Values
BuildNumberFormat = $(BuildDefinitionName)_$(Date:yyyyMMdd)$(Rev:.r)
Result = Ephone_DIT_Deploy_20150424.1
01:56
Run On Agent (reserved build agent U4VMDWODBDEV03 - Agent1)
Initial Property Values
MaxExecutionTime = 00:00:00
MaxWaitTime = 04:00:00
ReservationSpec = Name=*, Tags=
00:00
Get the Build Directory
Initial Property Values
Result = d:\temp\217\CTI\Ephone_DIT_Deploy
01:53
If Not String.IsNullOrEmpty(ConfigurationFolderPath)
Initial Property Values
Condition = True
01:53
Run TfsBuild for Configuration Folder
Initial Property Values
BinariesSubdirectory =
BuildDirectory = d:\temp\217\CTI\Ephone_DIT_Deploy
CommandLineArguments =
ConfigurationFolderPath = $/CTI/DEV/DEV_INT/source/TeamBuildTypes/EPhone_DIT
DoNotDownloadBuildType = False
LogFilePerProject = False
MaxProcesses = 1
NodeReuse = False
RecursionType = OneLevel
SourcesSubdirectory =
TargetsNotLogged =
TestResultsSubdirectory =
ToolPath =
ToolPlatform = Auto
Verbosity = Diagnostic
C:\Windows\Microsoft.NET\Framework64\v4.0.30319\MSBuild.exe /nologo /noconsolelogger "d:\temp\217\CTI\Ephone_DIT_Deploy\BuildType\TFSBuild.proj" /m:1 /nr:False "@d:\temp\217\CTI\Ephone_DIT_Deploy\BuildType\TfsBuild.rsp"
00:08
Getting sources
00:02
Labeling sources
00:19
Built $/CTI/DEV/DEV_INT/source/TeamBuildTypes/EPhone_DIT/TFSBuild.proj for target(s) CompileConfiguration.
00:19
Built $/CTI/DEV/DEV_INT/source/TeamBuildTypes/EPhone_DIT/TFSBuild.proj for target(s) CompileSolution.
00:19
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.sln for default targets.
00:05
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/CTIException/CTIException.csproj for default targets.
CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
00:01
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/CTIException/CTIException.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
00:10
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Softphone/Communications.Softphone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/CTIException/CTIException.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
00:01
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol.Proxy/Communications.Protocol.Proxy.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol.CTIOS/Communications.Protocol.CTIOS.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/CTIException/CTIException.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Softphone.DelphiCallConn/Communications.Protocol.DelphiCallConn.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
00:05
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
00:02
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/ChannelIntegrator/ChannelIntegrator.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
CSC: Assembly generation -- Referenced assembly 'System.EnterpriseServices.dll' targets a different processor
CSC: Assembly generation -- Referenced assembly 'System.Web.dll' targets a different processor
CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
CSC: Assembly generation -- Referenced assembly 'System.EnterpriseServices.dll' targets a different processor
CSC: Assembly generation -- Referenced assembly 'System.Web.dll' targets a different processor
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.Workflow.Interface/EPhone.Workflow.Interface.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Microsoft.Common.targets (1605): There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "d:\temp\217\CTI\Ephone_DIT_Deploy\Binaries\Debug\EPhone.dll",
"x86". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take
a dependency on references with a processor architecture that matches the targeted processor architecture of your project.
00:02
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Workflow/EPhone.Workflow.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.Workflow.Interface/EPhone.Workflow.Interface.csproj for default targets.
00:01
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneReporting/EPhoneReporting.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.Workflow.Interface/EPhone.Workflow.Interface.csproj for default targets.
C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Microsoft.Common.targets (1605): There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "d:\temp\217\CTI\Ephone_DIT_Deploy\Binaries\Debug\EPhone.DataModel.dll",
"x86". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take
a dependency on references with a processor architecture that matches the targeted processor architecture of your project.
C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Microsoft.Common.targets (1605): There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "d:\temp\217\CTI\Ephone_DIT_Deploy\Binaries\Debug\EPhone.dll",
"x86". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take
a dependency on references with a processor architecture that matches the targeted processor architecture of your project.
C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Microsoft.Common.targets (1605): There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "d:\temp\217\CTI\Ephone_DIT_Deploy\Binaries\Debug\EPhone.DataModel.dll",
"x86". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take
a dependency on references with a processor architecture that matches the targeted processor architecture of your project.
C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Microsoft.Common.targets (1605): There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "d:\temp\217\CTI\Ephone_DIT_Deploy\Binaries\Debug\EPhone.dll",
"x86". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take
a dependency on references with a processor architecture that matches the targeted processor architecture of your project.
C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Workflow.Targets (121): Compilation failed. Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneReporting/EPhoneReporting.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneCallback/EPhoneCallback.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.Workflow.Interface/EPhone.Workflow.Interface.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Workflow/EPhone.Workflow.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol.CTIOS/Communications.Protocol.CTIOS.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Softphone.DelphiCallConn/Communications.Protocol.DelphiCallConn.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol.Proxy/Communications.Protocol.Proxy.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/ChannelIntegrator/ChannelIntegrator.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.Workflow.Interface/EPhone.Workflow.Interface.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneReporting/EPhoneReporting.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Workflow/EPhone.Workflow.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneCallback/EPhoneCallback.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneUserControl/EPhoneUserControl.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Softphone/Communications.Softphone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/CTIException/CTIException.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/ChannelIntegrator/ChannelIntegrator.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneMarcomApplication/EPhoneMarcomApplication.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneUserControl/EPhoneUserControl.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneCallbackApplication/EPhoneCallbackApplication.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneUserControl/EPhoneUserControl.csproj for default targets.
00:02
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneQueView/EPhoneQueView.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Microsoft.Common.targets (1605): There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "d:\temp\217\CTI\Ephone_DIT_Deploy\Binaries\Debug\EPhone.DataModel.dll",
"x86". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take
a dependency on references with a processor architecture that matches the targeted processor architecture of your project.
C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Microsoft.Common.targets (1605): There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "d:\temp\217\CTI\Ephone_DIT_Deploy\Binaries\Debug\EPhone.dll",
"x86". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take
a dependency on references with a processor architecture that matches the targeted processor architecture of your project.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Tests/Ephone.Tests.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/ChannelIntegrator/ChannelIntegrator.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Softphone/Communications.Softphone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Tests.CallGenerator/EPhone.Tests.CallGenerator.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Softphone/Communications.Softphone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol.CTIOS.TestRunner/Communications.Protocol.CTIOS.TestRunner.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/CTIException/CTIException.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol.CTIOS.TestRunner/Communications.Protocol.CTIOS.TestRunner.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Tests.CallGenerator/EPhone.Tests.CallGenerator.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Tests.Runner/Ephone.Tests.Runner.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Tests/Ephone.Tests.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneIDD/EPhoneIDD.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Softphone/Communications.Softphone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/ChannelIntegratorTest/ChannelIntegratorTest.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/ChannelIntegrator/ChannelIntegrator.csproj for default targets.
CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
MSBuild Log File
00:08
Generating list of changesets
00:20
Built Skins\SkinEPhone.cs for default targets.
Skins\SkinEPhone.cs (3838): The member 'EPhone.SkinEPhone._txtOrderNumber_TextChanged(object, System.EventArgs)' does not hide an inherited member. The new keyword is not required. [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneUserControl\EPhoneUserControl.csproj]
C:\Windows\Microsoft.NET\Framework\v4.0.30319\Microsoft.Common.targets (3201): Unable to apply publish properties for item "microsoft.vbe.interop". [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneWinForm\EPhoneWinForm.csproj]
C:\Windows\Microsoft.NET\Framework\v4.0.30319\Microsoft.Common.targets (3201): Unable to apply publish properties for item "stdole". [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneWinForm\EPhoneWinForm.csproj]
C:\Windows\Microsoft.NET\Framework\v4.0.30319\Microsoft.Common.targets (4513): Item 'Microsoft.Net.Framework.3.5' could not be located in 'C:\Program Files (x86)\Microsoft SDKs\Windows\v8.0A\Bootstrapper\'. [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneWinForm\EPhoneWinForm.csproj]
Skins\SkinEPhone.cs (3838): The member 'EPhone.SkinEPhone._txtOrderNumber_TextChanged(object, System.EventArgs)' does not hide an inherited member. The new keyword is not required. [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneUserControl\EPhoneUserControl.csproj]
C:\Windows\Microsoft.NET\Framework\v4.0.30319\Microsoft.Common.targets (3201): Unable to apply publish properties for item "microsoft.vbe.interop". [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneWinForm\EPhoneWinForm.csproj]
C:\Windows\Microsoft.NET\Framework\v4.0.30319\Microsoft.Common.targets (3201): Unable to apply publish properties for item "stdole". [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneWinForm\EPhoneWinForm.csproj]
C:\Windows\Microsoft.NET\Framework\v4.0.30319\Microsoft.Common.targets (4513): Item 'Microsoft.Net.Framework.3.5' could not be located in 'C:\Program Files (x86)\Microsoft SDKs\Windows\v8.0A\Bootstrapper\'. [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneWinForm\EPhoneWinForm.csproj]
C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\TeamBuild\Microsoft.TeamFoundation.Build.targets (1740): TF201077: The work item type Bug cannot be found. It may have been renamed or destroyed.
C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\TeamBuild\Microsoft.TeamFoundation.Build.targets (1740): The "CreateNewWorkItem" task failed unexpectedly.
Microsoft.TeamFoundation.WorkItemTracking.Client.WorkItemTypeDeniedOrNotExistException: TF201077: The work item type Bug cannot be found. It may have been renamed or destroyed.
at System.Activities.WorkflowApplication.Invoke(Activity activity, IDictionary`2 inputs, WorkflowInstanceExtensionManager extensions, TimeSpan timeout)
at System.Activities.WorkflowInvoker.Invoke(Activity workflow, IDictionary`2 inputs, TimeSpan timeout, WorkflowInstanceExtensionManager extensions)
at Microsoft.TeamFoundation.Build.Tasks.WorkflowTask.ExecuteInternal()
at Microsoft.TeamFoundation.Build.Tasks.Task.Execute()
at Microsoft.Build.BackEnd.TaskExecutionHost.Microsoft.Build.BackEnd.ITaskExecutionHost.Execute()
at Microsoft.Build.BackEnd.TaskBuilder.<ExecuteInstantiatedTask>d__20.MoveNext()
00:03
Creating work item
Exception Message: TF270015: 'MSBuild.exe' returned an unexpected exit code. Expected '0'; actual '1'. See the build logs for more details. (type UnexpectedExitCodeException)
Exception Stack Trace: at System.Activities.Statements.Throw.Execute(CodeActivityContext context)
at System.Activities.CodeActivity.InternalExecute(ActivityInstance instance, ActivityExecutor executor, BookmarkManager bookmarkManager)
at System.Activities.Runtime.ActivityExecutor.ExecuteActivityWorkItem.ExecuteBody(ActivityExecutor executor, BookmarkManager bookmarkManager, Location resultLocation)
Final Property Values
BinariesSubdirectory =
BuildDirectory = d:\temp\217\CTI\Ephone_DIT_Deploy
CommandLineArguments =
ConfigurationFolderPath = $/CTI/DEV/DEV_INT/source/TeamBuildTypes/EPhone_DIT
DoNotDownloadBuildType = False
LogFilePerProject = False
MaxProcesses = 1
NodeReuse = False
RecursionType = OneLevel
SourcesSubdirectory =
TargetsNotLogged =
TestResultsSubdirectory =
ToolPath =
ToolPlatform = Auto
Verbosity = Diagnostic
Final Property Values
Condition = True
Final Property Values
MaxExecutionTime = 00:00:00
MaxWaitTime = 04:00:00
ReservationSpec = Name=*, Tags=
Result = U4VMDWODBDEV03 - Agent1 (vstfs:///Build/Agent/217)
Final Property Values
AgentSettings = Use agent where Name=* and Tags is empty; Max Wait Time: 04:00:00
BinariesSubdirectory =
ConfigurationFolderPath = $/CTI/DEV/DEV_INT/source/TeamBuildTypes/EPhone_DIT
DoNotDownloadBuildType = False
LogFilePerProject = False
MSBuildArguments =
MSBuildPlatform = Auto
RecursionType = OneLevel
SourcesSubdirectory =
TestResultsSubdirectory =
Verbosity = Diagnostic
Please have a look and guide where to find a problem
Thanks aheadHi Hooi,
I'd like to know whether you can build successfully in your local machine with MSBuild. You have to build succeed with MSBuild beore you can build with TFS Build since TFS build use MSBuild as its default compiler.
From the error message, you might build with wrong platform for your project. Please check if the build platfrom is proper. If you have customization of your build process template, it would be better to elaborate the reproduce steps and customization details.
Best regards, -
I am new to scripting (literally started reading/learning scripting a few hours ago), and I am stuck in trying to get my current script/command to filter a specific date range.
* Note: I am working with Server 2003 and 2008; because of the environment I am in, a lot of scripts (such as Powershell and VBScript) don't work; trying to stick with command line, as it appears to be the only thing that functions correctly in my environment
I am trying to search the System log in event viewer, for the most recent server reboot. Here is the command that I am currently running:
===========================================================
C:\Windows\System32\cscript C:\Windows\System32\eventquery.vbs /L System /FI "id eq 1074"
===========================================================
When run, the output looks like this:
===========================================================
Microsoft (R) Windows Script Host Version 5.6
Copyright (C) Microsoft Corporation 1996-2001. All rights reserved
Listing the events in 'system' log of host 'xxxxxxxxxxxxxxx'
Type Event
Date Time Source
Information 1074
12/18/2013 2:48:06 AM USER32
Information 1074
11/20/2013 3:25:04 AM USER32
Information 1074
10/23/2013 2:06:09 AM USER32
===========================================================
What I would like it to do is only show events that have happened in the last seven days, as well as show the event details if it does find an event that matches the criteria.
Any help would be greatly appreciated. Thanks!
NickI would prefer using Powershell , you can use below code
function Get-EventViewer
param(
[string[]]$ComputerName = $ENV:COMPUTERNAME,[string]$LogName,[int]$eventid
$Object =@()
foreach ($Computer in $ComputerName)
$ApplicationEvents = get-eventlog -logname $LogName -cn $computer -after (Get-Date).AddDays(-7) | ?{$_.eventid -eq "$eventid" }
foreach ($event in $ApplicationEvents) {
$Object += New-Object -Type PSObject -Property @{
ComputerName = $Computer.ToUpper();
TimeGenerated = $event.TimeGenerated;
EntryType = $event.EntryType;
Source = $event.Source;
Message = $event.Message;
$column1 = @{expression="ComputerName"; width=12; label="ComputerName"; alignment="left"}
$column2 = @{expression="TimeGenerated"; width=22; label="TimeGenerated"; alignment="left"}
$column3 = @{expression="EntryType"; width=10; label="EntryType"; alignment="left"}
$column4 = @{expression="Source"; width=15; label="Source"; alignment="left"}
$column5 = @{expression="Message"; width=100; label="Message"; alignment="left"}
$Object|format-table $column1, $column2, $column3 ,$column4 ,$column5
$Object.GetEnumerator() | Out-GridView -Title "Event Viewer"
You can do a function call like
Get-EventViewer -LogName system -ComputerName "computername" -eventid "2017"
Maybe you are looking for
-
Hi All, I am working on Apex with Oracle XE universal...i just tried to acheive print pdf functionality throgh integration of Apex with Apache cocoon... Everything is working fine...my Apache server is working,cocoon is working but when i m clicking
-
When I download a song from my iOS device, the song does not show up on my Mac. I checked the trouble shooting suggestions-but still no luck. Any suggestions? Thanks.
-
Does the iphone 4 support IOS7?
Does the iphone 4 support IOS7?
-
whenever there is a task I am displaying a progress bar of all the tasks that is going on. It shows the prgress and a scroll pane when it needs to scroll. The strange thing is in 1.4 it appears squashy but in 1.5 it works fine. I am just wondering wh
-
Connection to database under JDeveloper 10.0.1 is not working
Full version of Oracle 10g (including Oracle JDeveloper 9.0.4) is instaled in Oracle-home directory "c:\DevSuiteHome". I have instaled Oracle JDeveloper 10.1.2 in other Non-Oracle directory "c:\JDev102", so I have both version of JDeveloper instaled.