Connection to database under JDeveloper 10.0.1 is not working

Full version of Oracle 10g (including Oracle JDeveloper 9.0.4) is instaled in Oracle-home directory "c:\DevSuiteHome".
I have instaled Oracle JDeveloper 10.1.2 in other Non-Oracle directory "c:\JDev102", so I have both version of JDeveloper instaled.
The same connection to database is working correctly under JDeveloper 9.0.4, and not working under JDeveloper 10.0.1.
When I test connection under JDeveloper 10.0.1, next message is displayed:
ORA-00604: error occurred at recursive SQL level 1
ORA-12705: invalid or unknown NLS parameter value specified

Hi,
This exception is thrown when different versions of the dependencies are being picked up and loaded by the process.
Are you deploying the application or a specific machine?
What type of application is being tested here? i.e console, ASP.NET, etc.
Make sure you are referencing the 11.2.0.1.1 assembly and that DLLPATH in the registry to pointing to the proper location for its dependencies.
Make sure there are no old versions of the ODP dependencies in the application/bin directory and that you are picking up the assembly from the GAC.
HTH
Jenny

Similar Messages

How to connect sybase database in JDeveloper 11g using JConnect

Hi
How to connect sybase database in JDeveloper 11g using JConnect? Please help.

User,
It would help if you explained Sybase Jconnect instead of leaving us to google.
At any rate, it appears you need to create a library definition in JDeveloper, add the appropriate JConnect JAR files to the library's classpath, and then add the library to your project.
John

You must have connected the Time Capsule with a router that does not work with my direct cable from my ISP

you must have connected the Time Capsule with a router that does not work with my direct cable from my ISP

I tried to answer in your other post.. please stick to one thread ..
What method of internet do you have.. is this fibre install.. if so the TC should just plug in and use dhcp in router mode.. press and hold the reset and it will go back to router mode by default.

Can't connect to websites with any browser. Bookmarks do not work but bookmarks through bookmarks edit works just fine.

Can't connect to websites with any browser. Bookmarks do not work but bookmarks through bookmarks edit works just fine.

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

SOMEONE PLEASE HELP ME THIS IS MY FIRST TIME DOING THIS MY IPOD IS DISABLED AND IT SAID CONNECT TO I TUNES I DID THAT AND ITS NOT WORKING HELP ME PLEASE AND THANK U

SOMEONE PLEASE HELP ME THIS IS MY FIRST TIME DOING THIS MY IPOD IS DISABLED AND IT SAID CONNECT TO I TUNES I DID THAT AND ITS NOT WORKING HELP ME PLEASE AND THANK U

Please turn off your caps lock.
See http://support.apple.com/kb/HT1212.

How to connect to database using jdeveloper

Please send some info how to connect to the oracle database using jdeveloper

Go to the CONNECTIONS tab in Jdeveloper (look under the view menu if its not available). Right click on the database node and create NEW CONNECTION.
Also do a search on the help for DATABASE CONNECTIONS
Regards
Grant Ronald
oracle Product Management

Connect a database to jdeveloper webcenter suite

Hi, i got some problems, maybe because i'm a beginer.
I am creating with jdeveloper webcenter suite, a web portal. I learn that i need to connect my web in to a database to can run and try to use my web portal. Now, i'm trying to create a database in my computer, i do it with databse oracle 10g express edition, that is correct? i have to create something? any body knows any tutorial to help me how to create and connect a database to my project? it is easy?
thanyou very much
Valenti, from Barcelona
Edited by: user11933068 on 06-oct-2009 0:48

Hi,
wrong forum, try
WebCenter Portal
Frank

JDeveloper and Team System Extension not working

I am using JDeveloper 11g (11.1.1.1) and latest VSTS extension. The Team System extension does not work.
Here are what I have done:
1) Install JDev, JDev team system extension, TFS team explorer.
2) Workspace created in Team Explorer.
3) JDev Versioning control set for Team system. Select workspace, refresh it.
4) Create a new application/project under team explorer workspace. In Application explorer, The application and project showed up with a "X" mark - not in source control.
5) Add the application/project into source control. Succeeded.
6) But - the application and project still show up with "X" mark. Trying to add again, JDev pop up error message: "file already exists in source control". Files still show up in pending changes window.
I am using windows XP SP2 for development.
Any ideas? Please, this is urgent.
Edited by: user8658859 on 2009/9/24 上午 2:55

I am betting you are running 4.3? I just upgraded my GS3 to 4.3 and now I can't get the GMail smart extension to work. Previously, I was able to on the same phone (but running 4.1.2) but couldn't use WatchIt. Now I can use WatchIt, but can't use Gmail. How frustrating!!

How to connect my ipad to TV is vga adapter is not working

Hi i am trying to connect my ipad via vga to my beovision 9. All is correctly installed but its not working. My Beovision service centre advises to purchase an hdmi adapter but this apparently not available. Any suggestions What to do next ??

HI and welcome....
This thread may offer some ideas for you.
http://discussions.apple.com/thread.jspa?messageID=11579515&#11579515
Carolyn

Hello. i have a ipod touch 4, and i am putting in the correct passwotd but it is saying im not, now its saying to connect to itunes on my computer but itunes will not work. what do i do?

hello.
i have a ipod touch 4 and i have being putting in the correct password for it but it keeps saying it's wrong. now it is telling me to connect to itunes but itunes does not work on my computer.
i need this problem fixed ASAP because i use my ipod for my uni studys..
thank you alice walsh.

Place it in recovery mode by:
Placing your device into recovery mode
Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the other end of the cable connected to your computer's USB port.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
Note: If you see the screen pictured below, let the device charge for at least ten minutes to ensure that the battery has some charge, and then start with step 2 again.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button:
If necessary, open iTunes. You should see the following "recovery mode" alert:
Use iTunes to restore the device.
If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes

IMac 27inch (late2009) 2nd display connecting a powerbook (2012) with mini displayport cable is not working

Any solution to solve this?

Solley wrote:
I'm trying to connect my new Dell U2713H to my MBPr early 2013 (runs Yosemite 10.10.2) using MiniDisplayPort-to-DisplayPort cable but I'm getting the floating msg on the Dell "No DVI-D cable. The display will go into Power Save Mode in 5 minutes." DP is plugged into the input DP port on the monitor.And of course power cable is plugged in as well. Do I miss something?
You probably need to press the buttons usually located in the bottom right corner of the screen to tell the screen to use the Displayport socket and not the DVI socket. It sounds like it is currently set to use the DVI socket which of course is not connected to your computer. As a result of not finding a computer attached to the DVI socket it then decides there is no point staying turned on and instead goes in to energy saver mode waiting for something to appear on the DVI socket.

Oracle Database Express Edition 11g Release 2: Does not work in Windows x64

Hi
I download a year ago oracle 10g and installed in windows7/64bit.
Then I messed up my computer. So I had to reinstall from scratch.
oracle 10g seems to be not available anymore.
Now 11g is available. But it says does not work in x64.
Can somebody explain this?
Thanks
Beat

Hi, and welcome to the OTN forums!
I download a year ago oracle 10g and installed in windows7/64bit.
Now 11g is available. But it says does not work in x64.Well, in fact, 10.2 XE wasn't certified for x64 either, not even for Linux x64...
11.2 XE has a Linux x86_64 release, and there has been an announcement that there'll be a x64 release for Windows as well, but it's not available (yet).
There have been a lot of reports that people got 11.2 XE work on x64 Windows machines as well, with a few tweaks at installation time and/or afterwards...
You'll find tons of posts on that topic when using forum search...
oracle 10g seems to be not available anymore.Right, the official downloads have been removed after all database 10.2 releases fell out of (regular) support.
-Udo
Edited by: Udo on 15.04.2013 21:48

MacBook Pro Trackpad-Zoom under firefox 5.0.1 is not working

Working with a macbook pro, my 2-fingers-trackpad-zoom is not working anymore on the web under firefox 5.0.1. (but in general, on all other surfaces of the computer it is working perfectly fine) - what happened? How can I change it?

I have just had the same issue after upgrading from snow leopard to Lion Mac OS x 10.7 with firefox 5.0.1... Not sure why as the Browser didn't change. I was also annoyed by the change in two finger trackpad scroll direction which I discovered was configurable by un-checking [System Preferences>Hardware>Trackpad<scroll&zoom>scroll direction:neutral].
Correction for the trackpad pinch zoom issue was a little more complex, you will need to re-configure firefox as follows:
# in the firefox url type >about:config >and press return accepting the warning
# Ctrl F should bring up a search box, type >browser.gestures
# either double click or right click to modify the following with these values:
# browser.gesture.pinch.in -> cmd_fullZoomReduce
# browser.gesture.pinch.in.shift -> cmd_fullZoomReset
# browser.gesture.pinch.out -> cmd_fullZoomEnlarge
# browser.gesture.pinch.out.shift -> cmd_fullZoomReset
All should start working immediately without the need to restart Firefox.
I don't think the zoom is as smooth as it was before....
Hope this helps someone...
Oops forgot number 5 and corrected a spelling error....
5 browser.gesture.pinch.latched -> false

Right click on XP under BootCamp with new MacBook Pro not working?

Is anyone else seeing this on the new MacBook Pro? (I have the 2.53 model):
I installed WinXP via BootCamp (BC). All went well. I installed the drivers from the Leopard install disk, which seemed to have the latest everything (BC 2.1.1?).
There is a "secondary click" function under the BC control panel in Windows for the trackpad, but it doesn't work at all.
Ctrl-Click also does not work. All other clicking is fine, but it's only left clicks that are allowed.
This reminds me of my original MacBook Pro and Boot Camp beta...

Three fingers and physical click. It's the same in Vista (except Vista's LAN driver works).
Eagerly awaiting the next version of Boot Camp! It's clear it was rushed, from both this and if you insert the CD and autorun (in Vista at least) it pops up with a couple of utilities for a Macbook Air.

I try to connect my iPad to a wifi network and is not working at all what is wrong ?

I Had connect my iPad to a wifi network and is working if I use it here but if I want to go google and find something is not working and the same happen whit Instagram it shows I am connect but in some parts is not working...

Hello iPadlil,
After reviewing your post, I have located an article that can help with Wi-Fi issues on iOS. It contains a number of troubleshooting steps and helpful advice for the issue you are experiencing:
iOS: Troubleshooting Wi-Fi networks and connections - Apple Support
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD

Connection to database under JDeveloper 10.0.1 is not working

Similar Messages

Maybe you are looking for