The DLL could not be found error

I have upgraded the IMAQdx on Real-Time Desktop target from 3.7 to 3.8 version. After that all imax functions in LabVIEW and MAX return same IMAXdx error "The DLL could not be found". Does anybody know what happens and how to fix this problem? I have tried uninstall the IMAQdx and then insall it again. This does not help.
Sergey

Yes, it is activated on my laptop that I use to upload software to real-time target (real-time desktop on NI 8354). Unfortunately I cannot find the procedure to activate IMAQdx on real-time. It works fine before IMAQdx upgrade and I cannot remember any additional actions I have performed when I have install it first time.
Sergey.

Similar Messages

"The folder could not be found" error message

I recently had Windows XP problems sever enough to cause me to reformat my hard drive and reinstall XP and all my programs. This resulted in drive letter assignments different from what I had before. I saved copies of my LR catalog in multiple locations to be safe. When I open Lightroom and point to the Catalog I get the error above when in the Develop Module and a "offline or missing" error code when in the Library Module. Obviously LR is looking for the files where they were before. I had been working with image files stored on K:\ but now those files are on H:\. I see three solutions: 1) do a reassignment of drive letters in Windows; 2) move the files from drive H:\ to drive K:\; 3) edit the target drive spec within the LR catalog (is this doable?). Does anyone have any comments on the merits of these solutions and any caveats to observe along the way? TIA, njb

Right click on the top level missing folder, then choose Find MIssing Folder from context menu. This will open a dialog from which you can navigate your way to the new location. Once selected Lr should relink to the missing files

RAS Error - The table could not be found.

Hi,
Bo version : XI2 SP2
BO SDK : RAS
I am getting following error while setting table location for the report going against Sybase (ODBC CR driver 5.1 wired protocol) database report.
com.crystaldecisions.sdk.occa.report.lib.ReportSDKServerException: The table 'CASH' could not be found.
Error in File C:\WINDOWS\TEMP\{6F59C5DB-DB01-4905-BFE6-5A302D2A9283}.rpt:
The table could not be found.---- Error code:-2147482939 Error code name:failed
     at com.crystaldecisions.sdk.occa.report.lib.ReportSDKServerException.throwReportSDKServerException(Unknown Source)
     at com.crystaldecisions.proxy.remoteagent.s.a(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.cf.a(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.z.a(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.ak.if(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.ad.int(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.bk.for(Unknown Source)
     at com.crystaldecisions.proxy.remoteagent.v.a(Unknown Source)
     at com.crystaldecisions.proxy.remoteagent.v.if(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.DatabaseController.a(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.DatabaseController.setTableLocation(Unknown Source)
what all properties needs to be set for Logon and also Location specific, any sample code for the RAS + ODBC + SYBASE will be highly appreciated.
code giving error
               // DatabaseController databaseController = reportClientDoc.getDatabaseController();
               Tables tables = reportClientDoc.getDatabaseController().getDatabase().getTables();
               ITable newTable = null;
               for (Object object : tables) {
                    Table table = (Table) object;
                    newTable = (Table) table.clone(true);
                    log.info("Table Name " + table.getName());
                    IConnectionInfo connectionInfo = table.getConnectionInfo();
                    com.crystaldecisions.sdk.occa.report.lib.PropertyBag propertyBag = connectionInfo.getAttributes();
                    log.info("propertyBag.size >> " + propertyBag.size());
                    databaseName = (String) propertyBag.get(DB_NAME);
                    dsnName = (String) propertyBag.get(DSN);
                    Set<Object> set = propertyBag.keySet();
                    for (Object key : set) {
                         log.info("Key >> " + key);
                         log.info(" === Value >> " + propertyBag.get(key));
                    log.info("----
                    // newTable.setQualifiedName(table.getAlias());
                    // Change connection information properties
                    connectionInfo = newTable.getConnectionInfo();
                    // Set new table logon properties
                    // 1. Set the DSN
                    // 2. Set the Data Source (Database)
                    PropertyBag newPropertyBag = (PropertyBag) propertyBag.clone(true);
                    // Set new table logon properties (the DSN and the data source)
                    PropertyBag logonPb = new PropertyBag();
                    //logonPb.putStringValue("DSN", dsnName);
                    logonPb.put("Database Type", "ODBC (RDO)");
                    logonPb.put("Data Source Name", dsnName);
                    logonPb.put("DSN", dsnName);
                    logonPb.putStringValue("Database", databaseName);
                    logonPb.putBooleanValue("UseDSNProperties", false);
                    String dataSource = "";
                    DatabaseInfoVO databaseInfoVO = null;
                    if (StringUtils.indexOf(dsnName, "XXXX") != -1) {
                         dataSource = "EPAM-" + databaseName;
                         databaseInfoVO = this.getDatabaseInfoMap().get(dataSource.toUpperCase());
                    } else if (StringUtils.indexOf(dsnName, "YYYY") != -1) {
                         dataSource = "EIMCO-" + databaseName;
                         databaseInfoVO = this.getDatabaseInfoMap().get(dataSource.toUpperCase());
                    } else if (StringUtils.indexOf(dsnName, "ZZZZ") != -1) {
                         dataSource = "CRD-" + databaseName;
                         databaseInfoVO = this.getDatabaseInfoMap().get(dataSource.toUpperCase());
                    } else if (StringUtils.indexOf(dsnName, "WWWW") != -1) {
                         dataSource = "AA-" + databaseName;
                         databaseInfoVO = this.getDatabaseInfoMap().get(dataSource.toUpperCase());
                    log.info("databaseInfoVO >>" + databaseInfoVO);
                    // Overwrite any existing properties with updated values
                    newPropertyBag.put(PropertyBagHelper.CONNINFO_CRQE_LOGONPROPERTIES, logonPb);
                    newPropertyBag.putStringValue(PropertyBagHelper.CONNINFO_CRQE_SERVERDESCRIPTION, dsnName);
                    newPropertyBag.putStringValue(PropertyBagHelper.CONNINFO_CRQE_DATABASENAME, databaseName);
                    newPropertyBag.putStringValue(PropertyBagHelper.CONNINFO_DATABASE_DLL, "crdb_odbc.dll");
                    newPropertyBag.putBooleanValue(PropertyBagHelper.CONNINFO_CRQE_SQLDB, true);
                    newPropertyBag.putBooleanValue(PropertyBagHelper.CONNINFO_SSO_ENABLED, false);
                    set = newPropertyBag.keySet();
                    for (Object key : set) {
                         log.info("Key2 >> " + key);
                         log.info("Value2 >> " + newPropertyBag.get(key));
                    connectionInfo.setAttributes(newPropertyBag);
                    connectionInfo.setUserName(databaseInfoVO.getUserName());
                    connectionInfo.setPassword(EZSuiteEncodeUtil.decrypt(databaseInfoVO.getPassword()));
                    connectionInfo.setKind(ConnectionInfoKind.CRQE);
                    newTable.setConnectionInfo(connectionInfo);
                    newTable.setName(table.getName());
                    newTable.setAlias(table.getAlias());
                    newTable.setQualifiedName(table.getQualifiedName());
                    // Update the table information
                    reportClientDoc.getDatabaseController().setTableLocation(table, newTable);
Thanks,
Rupesh
Edited by: Rupesh Raut on Oct 28, 2008 8:45 PM
Edited by: Rupesh Raut on Oct 28, 2008 8:46 PM

Hi,
This error message appears when the user does not have sufficient rights to the business view on which the report is based.
To resolve this error message, open the Business View Manager and verify that the user's rights are set up correctly.
To view a report based on a business view, the user or the group to which the user belongs, must have 'View' rights to the business view. Also, verify that none of the groups, including the Everyone group, to which the user belongs, has been explicitly denied 'View' rights.
If this does'nt help try to update database driver.
Make the copy of database and save it with different name ( without underscore) and point the crystal report to it.
Regards,
Shweta

TS1702 "App could not be found" error

I erased all data on iphone. Later when restoring, most of the apps are not syncing back with "because the app could not be found" error. HELLPP!!!

I assume that you are trying to sync them from your computer's iTunes ? If so do the actual files exist on your computer and the entries in your computer's iTunes aren't pointing to files that no longer exist on it ? If so then you should be able to delete the iTunes entries and then re-download them from the store : re-downloading.

Error message on boot up: The file could not start C:\Windows\SysWOW64\vidperf.dll. The path could not be found?

C:\Windows\SysWOW64\vidperf.dll The path could not be found? What does this mean? How do I re-install this packet and eliminate this error message?
Dell Laptop inspiron 1525 with Windows 7 Premium with open rights.

P
Just to eliminate the possibility please run Malwarebytes
Please download the free version of Malwarebytes.
Update it immediately.
Do a full system scan
Let us know the results at the end.
http://www.malwarebytes.org/products
Wanikiya and Dyami--Team Zigzag

Web Part Error: A Web Part or Web Form Control on this Page cannot be displayed or imported. The type could not be found or it is not registered as safe.

We have an SharePoint services 3.0 installation that uses custom web parts on 100s of subsites. The custom web parts on any website is presenting this error
Web Part Error: A Web Part or Web Form Control on this Page cannot be displayed or imported. The type could not be found or it is not registered as safe.
This past weekend we decided to create a new database server and migrate the databases to the new server in an effort to retire an old box.
INitially we attempted to go through the configuration wizard which didnt do anything but add a new database server to our farm. What we have done is remove the new database server from the farm and use an alias on the SP server to continue to use
the same name but actually get its data from the new database server.
Everything works with the site except these custom webparts.
Any thoughts on where to go to first, should i redeploy what i think are the webparts from VS 2005 (solutions are VS 2005 slns.)?
Tony Spaulding

You need to make Safe Control enteries in your web.config for the particular web application.
Open web.config
Locate the SafeControls Tag
Make a safe control entry
<SafeControl Assembly="Assembly name, Version=1.0.0.0, Culture=neutral, PublicKeyToken=d8eb6481d8b4beec" Namespace="your webpart namespace" TypeName="*" Safe="True" />
In order to find the assembly details, Open the GAC. Right click on your dll and then click properties.

The user function manager DLL (ufmanager.dll) could not be found.

Hi Everyone,
I just spent two horrible days getting a Windows 2003 server to run our .net 2008 asp Crystal report. It was all because of the unknown.rpt error. The final answer was to give the NETWORK SERVICE account full control to the C:\ and then remove that permission.
Now, I'm up to my next challenge:
Error in File C:\WINDOWS\TEMP\CrystalReport {2A76C903-674A-4A7B-AA04-44FC7E206C3F}.rpt:
The user function manager DLL (ufmanager.dll) could not be found.
That dll is there on the server. What should I do?
Please help!!!!
Thanks,
Ed

Ok, here is where the fun begins as the issue you are getting is not something I've run into before. A few clarifications and suggestions re. troubleshooting.
I used the latest runtime.msi
- confirm this was CRRedist2008_x86.msi (just want to be sure)
pdf about the unknown.rpt.
- do you have a link or name of the pdf?
To troubleshoot let's do this:
1) Download the depends utility. I want to see if there is a missing dependency. depends is here:
http://www.dependencywalker.com/
open the ufmanager.dll in depends and see what it reports.
2) Run Process Monitor utility. ProcMon can be downloaded from here:
http://technet.microsoft.com/en-ca/sysinternals/bb896645.aspx
Make sure you filter ProcMon for your process as this will shrink the log file. Then look for ufmanager.dll and see where the app is trying to load it from.
3) Check this registry entry:
HKLM\software\business objects\10.5\crystal reports
See that CommonFiles is pointing to c:\program files\business objects\common\2.8\bin.
4) Copy the ufmanager.dll from c:\program files\business objects\common\2.8\bin to your app directory (this is just a test as I want to see if we can load the dll from anywhere...)
Ludek

Crystal report error (The table '' could not be found)

Dear Expert,
As I know, the end user who don't want to edit the crystal report design no need to buy crystal report,right?
Using the 'Crystal reports for SAP B1', they already view the report.
But, how about, if I had created one crystal report, and then I want to distribute to end user. When I load the report on user machine that dont have crystal report, the system shown an error (The table '' could not be found).
I think, maybe because of the database location. When I create the report, of course I made connection to my machine as a source of database location. But, how i'm going to change the database location to user machine?
Is it when we login into SAP, did SAP auto detect the new location source? And will auto create connection to the crystal report?
Thanks in advance for any help.

Hi ,
We do not create the database connection for the end user. the end user must have the same database connection as it is set up on your machine. The report is looking for the same connection, with the same access into the database.
Best regards,
Jadie

"The attempted operation failed. An object could not be found" error when double clicking on an ics file

Operation System: Windows 8 Pro
System Type: 64-bit Operating System
Office: MS Office Professional Plus 2013
I am getting "The attempted operation failed. An object could not be found" error when I double click on an .ics file to an appointment to my calender. My outlook.com account's data file is set as default and this error only occurs if
that is the default data file. I thought that maybe my profile is corrupted. So, I opened up a new profile with the below steps and only add my outlook.com account there:
1-) Open up the Control Panel and go to Mail section
2-) Click "Show Profiles"
3-) Click "Add" and give a name to your profile.
4-) Configure your outlook.com account (with Auto Account setup, not manual steps)
5-) Finally, set that profile to be used always.
Then, I opened up the Outlook 2013 and clicked on the .ics file to add that appointment but got the same error.
Is this a known issue or specific to me?
Thanks!

yes, I have the same problem.
The workaround of saving the ICS file and then importing it into the current calendar
works,
but the ICS calendar
displays in other section, NOT in the section of my old events.
why ??

Could not save preferences because the file could not be found (Windows) then Error 1 on PS,AE,PR,ID

I was trying out Photoshop, everything was running fine then one day when I close it I get an error:
"Could not save preferences because the file could not be found..."
Now when I boot it I get the Configuration Error 1.
After Effects still boots, but it reset all my preferences there. For example the workplace layout was reset, all my saved Output presets were removed and my memory-cache and performance settings were reset again.
Premiere and InDesign get the error too and won't boot.
This is the second time it has happened, I'll try wiping every Adobe program and reinstalling all over again, but it had run fine before for a while and it randomly happened.
Any idea how to fix this?

Nope I havent touched the Documents folder.
Forgot to mention that I'm on Windows 7

Error in File ****.rpt: The table could not be found in

Hi ,
I have a Crystal Report which uses a stored procedure to get it's data.
The stored procedure has no parameters but it is pretty complex and gives a resultset in the end with a select statement.
I designed the report in CR 11.5.12.1838.
The report works perfect in crystal reports designer.
Unfortunately I am getting an error in Central Management Concsole and InfoView
The error is:
Error in File ****.rpt: The table could not be found.
I am using ODBC connection and I even used to sa credentials to run the report in CMC but had no luck.
One thing I should mention that the stored procedure name as ;1 in the end.
I appreciate if you could help me with this report
Thanks

The SQL profiler RPC completed shows:
exec sp_tables N'My[_]Procedure [_]Name[_]Has[_]Underscores,N'%',NULL,NULL
and it's variations. Nothing else and that returns no result.
My procedure name has underscores, I will get rid of that.
I will recreate my Stored procedure without underscore or any special characters and let you know about the result
Umit

InfoView - Error in File ...The table could not be found

When I run the a report out of Crystal Reports 2008 Developer using a 32 bit ODBC data source Microsoft Visual FOxPro Driver, the report runs fine. All of my reports run fine in the Crystal Developer
But when I run the same report in Java SAP BusinessObjects InfoView Enterprixe XI, the same report would get an error: The Table could not be found. Other errors I would get: Encapsulating page failed. None of the reports work in InfoView, but they would work in the Crystal Developer.
Our environment is Windows Server 2008 R2 on a 64-bit Dell PowerEdge Server.

Hello,
If you create the System DSN on the Server and test the connection does it work? If it does then BOE either can't find the DBF file or it doesn't have access to the folder.
Check the permissions on the folder where the database files reside, if they are not local then map the driver where they do exist.
Don

I keep getting the "some items could not be found" error.

I keep getting the some items could not be found error for some podcasts I downloaded then deleted. Unfortunately, now, I can't get rid of the error message. So I'm trying to search for said podcast to re-delete the entry. And it's not there. And I can't find it anywhere else. How can I fix this?

Another user named Springbk posted a fix that worked for me as I was having the same problem today:
I Changed my DNS settings to OpenDNS
On a Mac go to SYSTEM PREFERENCES>NETWORK>ADVACED>DNS
change DNS by adding ( + )
208.67.222.222
then
208.67.220.220
click okay/apply after. then try the update. after the update, just delete the two open DNS server numbers. should revert back to your old one.

When I tap the "download for Android" on my Android phone, I receive a "requested item could not be found" error message.

I am attempting to install Firefox mobile on my Android phone. When I tap "download for Android" on my current browser, I receive a "requested item could not be found" error message.

Firefox will not appear in the Market for most phones with incompatible hardware. You can check if your phone is supported here:
https://wiki.mozilla.org/Mobile/Platforms/Android
On some supported devices, a bug prevents Firefox from appearing in the Market. This may be related to the recent Market update. You can go to Settings/Applications and uninstall the Market update, then find and install Firefox.
Or, if you have a supported phone, you can download the app directly from here:
http://ftp.mozilla.org/pub/mozilla.org/mobile/releases/4.0b3/android-r7/multi/
(Note: To download the app directly for an AT&T phone, you will have to search for instructions on "sideloading" the APK file, since AT&T disables the option to install from non-Market sources.)

How can i solve the vpn server could not be found error on my iphone 5s?

how can i solve the vpn server could not be found error on my iphone 5s?

FWIW, back at work we have a Palo Alto Networks firewall and VPN. Have configured both the iPhone and the iPad with the pertinent details.
If I connect while in the premises (same LAN), connection is instantaneous and flawless.
If I connect while away, no matter which external network, the first attempt to connect ALWAYS fails with a NOT FOUND error. Yet if I try again immediately after, it ALWAYS connects with no further issues.

The DLL could not be found error

Similar Messages

Maybe you are looking for