The encoding "ISO8859_1" is not supported.

I am trying to bring up WLS 6.1 for the examples that got shipped by BEA and I
am getting this error:
Starting WebLogic Server ....
<Dec 28, 2001 5:50:46 PM CST> <Notice> <Management> <Loading configuration file
.\config\examples\config.xml ...>
<Dec 28, 2001 5:50:54 PM CST> <Notice> <WebLogicServer> <Starting WebLogic Admin
Server "examplesServer" for domain "examples">
<Dec 28, 2001 5:51:25 PM CST> <Error> <Management> <Error parsing XML descriptor
for application examples:Name=petstore,Type=Application
org.xml.sax.SAXParseException: The encoding "ISO8859_1" is not supported.
at weblogic.apache.xerces.framework.XMLParser.reportError(XMLParser.java
:1082)
at weblogic.apache.xerces.readers.DefaultEntityHandler.startReadingFromD
ocument(DefaultEntityHandler.java:541)
at weblogic.apache.xerces.framework.XMLParser.parseSomeSetup(XMLParser.j
ava:310)
at weblogic.apache.xerces.framework.XMLParser.parse(XMLParser.java:966)
at weblogic.xml.process.ProcessorDriver.process(ProcessorDriver.java:131
Can anyone please advise what I need to do
KK

Kubo,
What platform are you running on? Did you change any of the config.xml, startPetStore
scripts? Is this a 'clean install' and then you run startPetStore and receive
this error?

Similar Messages

Requested Java encoder 'Cp932' is not supported by this JDK

I've got :
MS SQL Server 7.0 SP2 setup for Japanese using codepage 932
WebLogic 4.51 using jdbcKona/MSSQLServer4 drivers
JDK 1.2.2
on Windows/NT 4 SP5
I get the following when attempting to create a connection pool:
registerDriver:
driver[className=weblogic.jdbc.mssqlserver4.Driver,weblogic.jdbc.mssqlserver4.Driver@7bd40dd9]
java.sql.SQLException: The requested Java encoder 'Cp932' is not supported by
this JDK.
at
weblogic.jdbcbase.mssqlserver4.BaseConnection.setEncoding(BaseConnection.java:303)
at weblogic.jdbcbase.mssqlserver4.BaseConnection.<init>(BaseConnection.java:66)
at weblogic.jdbcbase.mssqlserver4.TdsConnection.<init>(TdsConnection.java:47)
at weblogic.jdbc.mssqlserver4.TdsConnection.<init>(TdsConnection.java:40)
at
weblogic.jdbc.mssqlserver4.MicrosoftConnection.<init>(MicrosoftConnection.java:31)
at weblogic.jdbc.mssqlserver4.Driver.newConnection(Driver.java:30)
at weblogic.jdbcbase.mssqlserver4.ConnectDriver.connect(ConnectDriver.java:165)
at
weblogic.jdbc.common.internal.ConnectionEnvFactory.makeConnection(ConnectionEnvFactory.java:145)
at
weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource(ConnectionEnvFactory.java:105)
at
weblogic.common.internal.ResourceAllocator.makeResources(ResourceAllocator.java,
Compiled Code)
at weblogic.common.internal.ResourceAllocator.<init>(ResourceAllocator.java,
Compiled Code)
at
weblogic.jdbc.common.internal.ConnectionPool.startup(ConnectionPool.java:327)
at weblogic.jdbc.common.internal.JdbcInfo.initPools(JdbcInfo.java, Compiled
Code)
at weblogic.jdbc.common.internal.JdbcInfo.startup(JdbcInfo.java:133)
at weblogic.jdbc.common.internal.JdbcStartup.main(JdbcStartup.java:11)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.t3.srvr.StartupThread.runMain(StartupThread.java:219)
at weblogic.t3.srvr.StartupThread.doWork(StartupThread.java, Compiled Code)
at weblogic.t3.srvr.PropertyExecuteThread.run(PropertyExecuteThread.java:61)
DriverManager.getConnection("jdbc:weblogic:mssqlserver4")
trying
driver[className=weblogic.jdbc.pool.Driver,weblogic.jdbc.pool.Driver@f6380ddf]
trying
driver[className=weblogic.jdbc.mssqlserver4.Driver,weblogic.jdbc.mssqlserver4.Driver@7bd40dd9]
What is happening?
Any help/info is greately appreciated.
Thanks.
-pc
sien, peng-chong
mailto://[email protected]
918 parker street, suite a-12, berkeley, ca 94710-2526
tel: 510.649.3757 | fax: 510.848.1533

I figured out the problem with the sqljdbc4.jar but...
now i am getting this error
java.lang.ClassNotFoundException: No ClassLoaders found for: com.microsoft.sqlserver.jdbc.SQLServerDriver
     at org.jboss.mx.loading.LoadMgr3.beginLoadTask(LoadMgr3.java:212)
     at org.jboss.mx.loading.RepositoryClassLoader.loadClassImpl(RepositoryClassLoader.java:521)
     at org.jboss.mx.loading.RepositoryClassLoader.loadClass(RepositoryClassLoader.java:415)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
     at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:316)
     at java.lang.Class.forName0(Native Method)
     at java.lang.Class.forName(Class.java:169)

Error Message: "The formula syntax is not supported by the report"

We are using 'Development Environment: SAP Crystal Reports, version for Visual Studio 2010 u2013 Standard ' and using CrystalDecisions.CrystalReports.Engine and CrystalDecisions.ReportAppServer APIu2019s
I am reading SQLExpressionFields from one source .rpt file & want to add it to another ReportDocument. While doing so, it gives an error " The formula syntax is not supported by the report"
doc.ReportClientDocumentDataDefController.FormulaFieldController.Add(formualField); // formualField is SQLExpressionField from source ReportDocument
But when I tried to Add FormulaField, it succeeds
Please help me in knowing how to add SQlExpressionFields to ReportDocument.
Regards,
-atul

Thanx Don & Ludek for the reply.
CR provides support for addition/modification of SQLExpressions.
CRAXDRT.Application application = new CRAXDRT.ApplicationClass();
CRAXDRT.Report innerReport = application.OpenReport(path, CROpenReportMethod.crOpenReportByTempCopy);
innerReport .SQLExpressionFields.Add(name, strSQLExpression)
CRAXDRT.dll provides support for addition/modification of SQLExpression fields. But its not compatible with 64bit.
Just curious to know, is there any future plan to provide support for add/modify SQLExpression fields?
Thanx
-atul
Edited by: Atul Chivate on Aug 21, 2011 6:13 PM

JAN 4, 2012 As of the Upgrade to   Lion,. and the Email portion, ..   DOES NOT allow a Video Clip to be sent via the Email as the I-Photo is not supported by Video Clips ( Previous Leopard No problem clip and drag via Quick Time Pro to the email

JAN 4, 2012
As of the Upgrade to   Lion,.   2007 I-Mac -   the Email portion, ..   DOES NOT    allow a Video Clips to be sent via the Email
as the I-Photo is not supported by Video Clips ( Previous Leopard )
No problem clip and drag via Quick Time Pro to the email and select the Attchment size to send. . Depending on the
Size of the Video Clip ..      Now Lion only Export's   1 size, .   only and as a result . . teh File is TOO Large and
Will NOT send via E-Mail    ???
Between the   Issue of   the   Lion, and Email issues ,   and the   Upgrade of   I-Touch to 5.1 from 4.2.1
as my Photo Size is Huge ..    70,000 + photos in the Computer. .   and was   40,000 in the   I - Touch .. .
The New I-Touch too will not Load the same as Previously used on either my 16 GB   or 32 GB   Unit . .
          No Help . ..   so far, .. as a Apple user   since   1996 ..    I have Never experieanced such frustration    ???
               ( any one have some help if similar experiances    ?     thank you     )

JAN 4, 2012
As of the Upgrade to   Lion,.   2007 I-Mac -   the Email portion, ..   DOES NOT    allow a Video Clips to be sent via the Email
as the I-Photo is not supported by Video Clips ( Previous Leopard )
No problem clip and drag via Quick Time Pro to the email and select the Attchment size to send. . Depending on the
Size of the Video Clip ..      Now Lion only Export's   1 size, .   only and as a result . . teh File is TOO Large and
Will NOT send via E-Mail    ???
Between the   Issue of   the   Lion, and Email issues ,   and the   Upgrade of   I-Touch to 5.1 from 4.2.1
as my Photo Size is Huge ..    70,000 + photos in the Computer. .   and was   40,000 in the   I - Touch .. .
The New I-Touch too will not Load the same as Previously used on either my 16 GB   or 32 GB   Unit . .
          No Help . ..   so far, .. as a Apple user   since   1996 ..    I have Never experieanced such frustration    ???
               ( any one have some help if similar experiances    ?     thank you     )

TS5148 When I try to play a movie on Netflix from my IPad, I get a pop up saying: Cannot play video. "The connected display is not supported".

When I try to play a movie on Netflix from my IPad, I get a pop up saying: Cannot play video. "The connected display is not supported". I have updated my Apple TV, tried restarting it, and have tried using my IPod Touch all without any luck. This display has worked in the past. This just happen a couple days ago.
Any ideas out there?

I have been successfully using my Apple TV with my iPad2 to access Netflix through airplay (mirroring) and suddenly it won't work. It says "the connected display is not supported" What's up?
Also when I try to stream Netflix through my Apple TV menu on my television it says "An error occurred loading this content. Try again later. But trying again later doesn't work any better.
Now the only way I can watch Netflix is using my small iPad screen. It appears the problem is with streaming Netflix through my Apple TV

"Cannot play video - The Connected display is not supported" error message using Netflix 5.0.2 on my iPad

I'm running iOS 7.0.3 on my iPhone 4S and iPad (3rd gen) and have just upgraded to the current version of the Neflix app available in the Canadian App Store (5.0.2).
Although all other apps I've tried (e.g. Podcast, VLC) are able to properly output video & audio directly to my TV using the HDMI adapter (i.e. NOT via an Apple TV), the Netflix app pops up the error message "Cannot play video - The connected display is not supported". If I start a video and then plug the HDMI cable in, it will play for a few seconds and then halt with the same error message.
Netflix & Apple were supposed to have been working together to fix the previous issue with this scenario which was causing audio to be output but no video. The current Netflix app update was released yesterday and seems to have taken a step backward.
When I contacted Netflix support, they indicated that they have done whatever can be done from their side and this is now Apple's issue.
Any ideas?
Thanks!
Kiron

Hello all,
I have an iPad 2 16GB with iOS 7.0.3 and Netflix version 5.0.2. I cannot watch netflix on an External LCD monitor that I have through VGA out. I use bluetooth speakers, so the AirPlay is going to that for Audio. Before this update, this combo worked without an issue.
So as of Friday Nov. 8/2013, I contacted Netflix support, and they said they fixed the problem on their end, and the fix is on the Apple side of things, and to contact Apple support.
So, I contacted Apple support, and the first person I spoke to said I would have to agree to pay a $35 fee for 30 days of support to this problem since my unit is out of warranty. I said this isn't a hardware issue, it's a software issue, and I'm not willing to pay to fix a problem you created. So I got a Senior Level advisor on the line, and she was helpful, and she's looking into the issue for me and said she'll contact me sometime on Tuesday or Wednesday (Nov. 12 or 13) to let me know of the issue.
Here's the thing: this is a combination of Netflix and iOS not working correctly with any of the Apple Authorized Dongles. This is truly a code error that some hot shot programmer had major oversight on, and their management didn't catch it either. There was no reason for Netflix to rush to get this Netflix update going until Apple sorted out the bugs in iOS 7.
Anyway, if I hear anything from Donna (the advisor), I'll post it and let you guys know. In the mean time, good luck!

How can I get my stereo to play music videos from my Ipod Nano? It comes up with the message "This device not supported". Strangely my Iphone IS recognised. The stereo, Ipod, and Iphone are less than 4 months old. Any suggestions welcome!

How do I get my Ipod to play music videos through my theatre system? I keep getting the message "This device not supported". My theatre system WILL recognise my Iphone however. The theatre system, Ipod, and Iphone are all less than 4 months old. Any suggestions welcome!

Check with the theater system vendor and see if their system is compatible with the Nano. The resolution on the Nano may be too low for the system.

I would like to remove version 4 and go back to 3.5 or 3.6 for my mac because the new version is not supported in my college's uen site; how do i do this?

this is the webpage that is not supported yet by the new version
https://online.uen.org/webct/entryPageIns.dowebct

Trash Firefox 4, then install Firefox 3.6. You can get Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html
When you trash Firefox 4 it will not remove your bookmarks, passwords etc, they are stored elsewhere and will be used when you install Firefox 3.6

Save as PDF and Save PDF as PostScript options in the Printer dialog are not supported.

I downloaded Indesign CS3 trial and liked everything about it until I attempted to print to postscript and got that message. Nothing I have tried has helped. I have seen in various forums that others are having the same problem, but haven't found any solution offered. I am running Tiger 10.4.10 on a new Intel Imac with 3G ram. This is a procedure I use very often in my workflow, and have never had this problem with CS2 on my PC or other Macs. Is there a solution? I downloaded the .1 update and installed that and it didn't change anything.

PLEASE SOMEONE HELP ME.
Its the first time Im using print booklet option to save my file. I have the same problem when trying to save as pdf and get the
"The Save as PDF and Save PDF as PostScript options in the Printer dialog are not supported."
I'm trying to save a .pdf of a booklet of a facing pages document of A4 size each facing page for a whole size A3, then hope to let the pages be correctly arranged by inDesing, then print and staple.
Meaning pages will be like this - Page #60 left side [of the A3] - page #1 right side [of the A3] , page # 2 right side[of the A3] - page #59 left side[of the A3] etc...
I CANT DO IT. I tried to follow Melvin Thompson , but when I choose save .ps and open it in preview all I see is independent a4 pages and just the left ones , .. How can I save my file as .pdf ready to be printed in a3 ?
I really appreciate any help.

The Save as PDF option in the Printer dialog is not supported.

My client is asking me to save a separations PDF file. But whenever I save it to PDF, a this message pops out: The Save as PDF option in the Printer dialog is not supported. I'm using InDesign cs5 and Adobe PDF 9.0. I'm on Mac OS X 10.6.6.

What it says is correct, have a look at this post here.

How to fix "Modifying a column with the 'Identity' pattern is not supported"

When doing Code First Migrations my mobile service always errors in the seed method with: 'Modifying a column with the 'Identity' pattern is not supported. Column: 'CreatedAt'. Table: 'CodeFirstDatabaseSchema.Methodology' for the CreatedAt column. All my
models inherit from EntityData.
// Sample model
using System;
using System.Collections.Generic;
using System.ComponentModel.DataAnnotations;
using Microsoft.WindowsAzure.Mobile.Service;
namespace sbp_ctService.Models
public class Methodology : EntityData
public Methodology()
this.Scenarioes = new List<Scenario>();
public string Id { get; set; }
[Required]
[StringLength(50)]
public string EntryMethod { get; set; }
[Required]
[StringLength(50)]
public string TestDirection { get; set; }
[Required]
[StringLength(50)]
public string PassCriteria { get; set; }
[Required]
[StringLength(50)]
public string Dependency { get; set; }
public bool ExtraInfo { get; set; }
public virtual ICollection<Scenario> Scenarioes { get; set; }
And in my Configuration.cs file during an update here's my seed method:
protected override void Seed(sbp_ctService.Models.sbp_ctContext context)
// This method will be called after migrating to the latest version.
context.Methodologies.AddOrUpdate(
m => m.Id,
new Methodology { Id = "Methodology1", EntryMethod = "P/F", PassCriteria = "P/F", Dependency = "None", ExtraInfo = false, TestDirection = "Round" },
new Methodology { Id = "Methodology2", EntryMethod = "P/F", PassCriteria = "Best", Dependency = "None", ExtraInfo = false, TestDirection = "Round" },
new Methodology { Id = "Methodology3", EntryMethod = "P/F", PassCriteria = "Best", Dependency = "None", ExtraInfo = false, TestDirection = "In/Out" },
new Methodology { Id = "Methodology4", EntryMethod = "P/F", PassCriteria = "Best", Dependency = "None", ExtraInfo = false, TestDirection = "Out" }
For some reason on an update the CreatedAt field is created and given a value of null. So of course on an insert/update it will error because CreatedAt is an Identity field.
I've tried to configure the modelBuilder in my context to tell it that CreatedAt is an identity field, but that still doesn't work.
modelBuilder.Entity<Methodology>()
.Property(m => m.CreatedAt)
.HasDatabaseGeneratedOption(DatabaseGeneratedOption.Identity);
So far the only way to fix this is by commenting out my Seed data, but it's not a fix. I've seen other solutions where you can force it to not serialize certain fields, but I don't know if those solutions apply.

So I think this occurs because you might have created the database (Code-first) with POCOs that didn't have the CreatedAt field in them. I think that's what I did and the easiest way to fix it for me was to delete my database and re-create it with my POCOs
inheriting from Entity Data from the very beginning. We were still in development so it worked out for us but I know some people might not be able to do that. Here's what my table looks like after it was created correctly:
USE [database_name]
GO
/****** Object: Table [sbp_ct].[Methodologies] Script Date: 2/24/2015 9:48:45 PM ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TABLE [schema_name].[Methodologies] (
[Id] NVARCHAR (128) NOT NULL,
[EntryMethod] NVARCHAR (50) NOT NULL,
[TestDirection] NVARCHAR (50) NOT NULL,
[PassCriteria] NVARCHAR (50) NOT NULL,
[Dependency] NVARCHAR (50) NOT NULL,
[ExtraInfo] BIT NOT NULL,
[Version] ROWVERSION NOT NULL,
[CreatedAt] DATETIMEOFFSET (7) NULL,
[UpdatedAt] DATETIMEOFFSET (7) NULL,
[Deleted] BIT NOT NULL,
[Name] NVARCHAR (MAX) NULL
GO
CREATE CLUSTERED INDEX [IX_CreatedAt]
ON [schema_name].[Methodologies]([CreatedAt] ASC);
GO
ALTER TABLE [schema_name].[Methodologies]
ADD CONSTRAINT [PK_schema_name.Methodologies] PRIMARY KEY NONCLUSTERED ([Id] ASC);
Does yours look something like that?

I am trying to download a free trial of photoshop for my macbook pro and it says there is an error and that the requirements for the new version is not supported for the mac I have. I have looked at the list of requirements but have no idea how to tell wh

I am trying to download a free trial of photoshop for my macbook pro and it says there is an error and that the requirements for the new version is not supported for the mac I have. I have looked at the list of requirements but have no idea how to tell what I do and do not have?

Apple Menu --> About this Mac.
Mylenium

Hi i just bought an Iphone 4s and every time i try to activate it It stops half way through and says the sim carrier is not supported please use the sim that came with this phone (which i am doing) and will not let me skip this and will not activate??/

Hi just bought an iphone 4 today tried to activate the phone and it won't let me..I go through language ect and it says activateing iphone may take a few mins then just stops and message on screen says that the sim carrier is not supported and please use the sim which came with the phone(which i am..& have tried another sim and still not working)........It wont let me bypass have tried reseting phone and restarting it nothing helps????

Your iPhone is locked to the original carrier who sold it
Only they can unlock it
The sim the iPhone refers to is the one the iPhone is locked to
You will have to contact them

The extraction program does not support object 0MAT_PLANT

Pessoal alguém já passou por este problema?
Estou tentando fazer um delta no objeto 0MAT_PLANT, mas me retorna sempre este erro.
Já fiz um novo Init, mas o erro continua.
The extraction program does not support object 0MAT_PLANT
Message no. R3009
Diagnosis
The application program for the extraction of data was called up using the invalid InfoSource/invalid InfoObject 0MAT_PLANT.
System Response
The data extraction is terminated.
Procedure
Check the SAP Support Portal for the appropriate Notes and create a customer message if necessary.

Hi Eduard ,
You can try the following steps to solve that
1. Delete the previous Delta Init for the InfoObject
If you have access to R/3 Side you can follow the steps or you can follow the BW Steps
Goto RSA7 ->Select and Delete the Init Request for the InfoObject
From BW Side
InfoPackage-> Inti for Source System -> Select & Delete
the Init Request
2. Execute the Init InfoPackage for the InfoPackage again.
3. After successful completion, execute the delta InfoPackage.
Hope it solves your problem, if not pls let me know.
Thanks & Regards,
Chandran Ganesan
SAP Business Intelligence

The extraction program does not support object 0JOB_ATTR

HI all,
I'm getting the following error when execting 0JOB_ATTR extractor in R/3 system (via RSA3):
The extraction program does not support object 0JOB_ATTR
Message no. R3009
Diagnosis
The application program for the extraction of data was called up using the invalid InfoSource/invalid InfoObject 0JOB_ATTR.
System Response
The data extraction is terminated.
Procedure
Check the SAP Support Portal for the appropriate Notes and create a customer message if necessary.
I've found various threads with this error (or similar ones), but none of them are solved (or not published solution). Haven't found any SAP notes yet either, so any input would be very helpfull.
Thank you.
G.

0JOB_ATTR not in use and SAP replaced this with 0EC_CJOB_ATTR... U have to use 0EC_CJOB_ATTR to load master data for 0JOB.
Even i faced the same problem and found the following info in one of the SDN thread, and we are using 0EC_CJOB_ATTR (make sure u have data in table HRP5050).
I have sent a message to SAP asking for the solution . Below is the reply what they gave.
"This error appears because of naming conventions we have to switch the name of the Data Source from 0JOB_ATTR to 0EC_CJOB_ATTR. Please use this data source to extract the compensation job attributes to BW.
Note also that data source 0EC_CJOB_ATTR extracts data from table HRP5050.
If no data is being extracted please do the following:
If you have data in HRP5050 and still do not get any data please try the following :
1) Take over the Data Source from the business content (RSA5)again and check in RSA3 .
2) Replicate the Data Source to BW
3) Activate the Info Source again.
4) Delete any previous delta initializations for the datasource.
5) Initialize the delta again
6) Try to load data".

The encoding "ISO8859_1" is not supported.

Similar Messages

Maybe you are looking for