The enhancement specification of structure type ekko is not consistent

Hi all,
While making a program that displays status of gr /ir, excise availing and miro I got an error as "The enhancement specification of structure type ekko is not consistent".So what does it mean and how to remove it.
Thanks
Regards
Navratan

Dear Navratan,
I have found one thread regarding your issue.
Please check if there any enhancement had done in your EKKO table.
http://solveissue.com/note?id=2030146
Thanks
Nishant

Similar Messages

Error: Finding the document specification by message type ... failed.

I'm writing my first BizTalk application base on the EAI Tutorial and getting the error
Finding the document specification by message type "ProductCatalogInformation" failed.
My schema has been deployed and is as follows.
<?xml version="1.0" encoding="utf-16" ?>
- <xs:schema xmlns="http-colon-backslash-baclslash-MondaySchemas.Schema1" xmlns:b="http-colon-backslash-baclslash-schemas.microsoft.com/BizTalk/2003" targetNamespace="http-colon-backslash-baclslash-MondaySchemas.Schema1" xmlns:xs="http-colon-backslash-baclslash-www.w3.org/2001/XMLSchema">
- <xs:element name="ProductCatalogInformation">
- <xs:complexType>
- <xs:sequence>
<xs:element name="GlobalDocumentFunctionCode" type="xs:string" />
<xs:element name="CatalogTypeCode" type="xs:string" />
<xs:element name="GlobalActionCode" type="xs:string" />
</xs:sequence>
</xs:complexType>
</xs:element>
</xs:schema>
My XML is as follows
<?xml version="1.0" encoding="UTF-8"?>
<ProductCatalogInformation>
    <GlobalDocumentFunctionCode>Request</GlobalDocumentFunctionCode>
    <CatalogTypeCode>Partial</CatalogTypeCode>
    <GlobalActionCode>Revise</GlobalActionCode>
</ProductCatalogInformation>
The error I get is
There was a failure executing the receive pipeline: "Microsoft.BizTalk.DefaultPipelines.XMLReceive, Microsoft.BizTalk.DefaultPipelines, Version=3.0.1.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" Source: "XML disassembler" Receive
Port: "MondaySolutionRequestPort" URI: "C:\BizTalk\Receive\*.xml" Reason: Finding the document specification by message type "ProductCatalogInformation" failed. Verify the schema deployed properly.
Suggestions please?
Is there a link where I can download the completed solution to the BizTalk Server Tutorial 1 Enterprise Application Integration ?
Thanks in advance..

1) Check the GAC and ensure that the schema is there, be sure the version numbers are the same.
2) You should also restart the host instance and try again.
To check that the schema exists and is deployed properly open the query analyser on your BizTalk Server and
use the BizTalkMgmtDb and run the query below. In the where clause place the correct target namespace and root node name which is being reported in the error log from the Event Viewer.
Select msgtype, assemblyid, clr_namespace, clr_assemblyname
from bt_documentspec
where msgtype = targetnamespace#rootnode;
3) Check the sample XML, its without namespace. Generate instance from the schema and then try.
Should be
<ProductCatalogInformation xmlns="http://MondaySchemas.Schema1"><\ProductCatalogInformation>
What
you need to do to fix "There was a failure executing the receive pipeline… failed to load. Verify the schema for this document specification is deployed and is in the Global Assembly Cache" Error after deploying BizTalk Solution
You can get everything you need to learn about BizTalk here at Learning
about BizTalk Server has never been easier now with the TechNet Wiki
Here is the solution: BizTalk
Server Tutorials--Tutorial 1: Enterprise Application Integration
Video at Biztalk
Server 2010: Enterprise Application Integration (EAI) Video Tutorials
Rachit

Active version of the BDoc type PRODUCT_MAT is not consistent

Hello,
We are using CRM 7.0. We tried to release change request but got an error message:
Active version of the BDoc type PRODUCT_MAT is not consistent in the table SEGM
Do you know what should we perform to resolve this problem?
Thanks in advance,
Sergey Kozyrev

Hi Sergey,
Please check the entry in table SMOG_TRANS for TR_NAME = PRODUCT_MAT.
Current active version i.e SMOACTV = X ,in SAP standard system is for,
SMOVERS = 00015 .
Also,you can try re-generating the BDoc PRODUCT_MAT once again.
Hope this helps!
Best Regards,
Shanthala Kudva.

I upgraded to Lion yesterday. Now I keep getting and error message: there was a problem connecting to the server. URLs with type "file:" are not supported. What server?

I upgraded to Lion yesterday. Now I keep getting and error message: there was a problem connecting to the server. URLs with type "file:" are not supported. What server? How do I get rid of this.

Take a look at this link, https://discussions.apple.com/message/16156214#16156214

Different structure types in itab

hello experts,
how can i fill the itab with different structure types.
if i give the componenttype/domain to 'any' in my structure declaration, then its not saving and showing the error.
how to solve this problem
thanks
Tim

Hi,
I think there is no general structure which accepts data of any types. I have the doubt why you need one internal table for storing data of different structure. You can declare multiple internal tables and store corresponding structure to that itab.
If you are looking for some internal table type whose structure can be dynamic then you can go for Field symbols table which is of form
field-symbols <itab> type standard table.
this can hold data of any structure.
but not rows of different structure ( which i think have no reason to be so )
Cheers
Kothand

I keep getting an error message there was a problem connecting to server. URLs with the type "file" are not supported

I keep getting an error messahe that says
There was a problem connecting to the server. URLs with type "file" are not supported
Any ideas?

Actually, in my case, turning off Time Machine didn't work. I had the same problem. We definitely traced it to Time Machine. The "Fix" was this: plugged in and designated different external HD as Backup volume. Then unplugged it and plugged in the original disc (after testing in in a different machine) and now the computer recognized it and error message stopped popping up. The Apple tech was as puzzled as I as to why this worked, but perhaps, forcing the machine to re-recognize it (or maybe even, gettting it recognized by a different machine first) somehow worked some magic.

Posting with transaction type 160 is not possible at MR8M

MODERATOR: Do not post (or request) email address or links to copyrighted or confidential information on these forums. If you do, the thread will be LOCKED and all points UNASSIGNED. If you have some information, please consider posting it to the [Wiki|https://wiki.sdn.sap.com/wiki/display/ERPFI/Home] rather than sharing via email. Thank you for your assistance.
Hi All,
We raised a PO w.r.t CWIP asset and posted GRN (MIGO - Transaction typr:100) and Invoice (MIRO).
Here, Invoice posted wrongly, So we are trying to reverse the invoice with MR8M (which is posted thru MIRO).
But system populating one message as per the following:
Posting with transaction type 160 is not possible here, see long text
Message no. AAPO 177
Diagnosis:
Transaction type 160 has a depreciation limitation, although posting is not mandatory in all of the depreciation areas entered However, it is not possible to select depreciation areas in the current transactions.
Procedure:
Check the specification of transaction type 160 or use transaction MR8M to enter the transaction
Please help
Sairavi
kumarfi9gmailcom

Welcome to the forum.
As a newbie you should understand the forum rules where you are not suppose to post any basic or repeated question. To avoid this, you should make a search here
[Forum Search|http://forums.sdn.sap.com/search!default.jspa?objID=f327]
Type the same error text in Search Terms so that you will find the solution.
thanks
G. Lakshmipathi

Exchg rate from new exch type X is not picked up in Treasury transactions

Dear All,
I am maintaining a new exchange rate type for treasury transactions called "x". I have made all the settings required for this. Following is the series of steps configured to pick up the exchange rate maintained for type "x" for a Interest rate instrument foreign currency transaction.
*Genaral Settings*
1) Define exchange Rate(E Rt) type 'X'.
2) Define translation ratios for curr translation
     X     usd     inr     1:1
     X     inr     usd     1:1
3) Define new doc type "ZF" with exch rate type "X"
4) Define Exch rate calculation indicator
     02     X     X
*Treasury settings*
5) Define company code additional data
     Rate Calculated     02
     Rate type(Debit)     X
     Rate type(crdit)     X
6) Assignment of valuation areas to accounting codes
     ER type      X
7) Define account determination
Doctype "ZF" assigned to the relevant posting specs
Document Splitting
8) Classify doc types for doc splitting
     ZF     0000     0001
9) Exch Rate of "X"
X     01.01.2006     usd     47.36     inr
after maintaining all these details I am trying to post an FC transactio using tcode TBB1. Everything is fine no errors nothing I can post the document also but THE EXCHANGE RATE MAINTAINED FOR TYPE X IS NOT PICKED INSTEAD RATE FOR TYPE M IS PICKED UP".
please advise if i missed something. I am not able to trace why the SAP is picking rate from type M when I made settings to pick the rate from type X.
Rgds
Komal

Hi
Generally for posting FI documents (which is what this T Code does) , M alone is used which is the standard SAP system functionality. For other purposes like valuation, translation, etc. we can have different exchange rate types.
Jayaram

BPM 10g: configuration name [ ProjectName ] and type [SQL] is not defined.

Hi There,
I try to help a colleague with his BPM10g project. When I start the engine in BPM Studio with his project I eventually get this error in a popup:
"The configuration name [<ProjectName>] and type [SQL] is not defined.
Detail: The connector must be configured in the appropriate context."
I upgraded from 10.3.1 to 10.3.2, but did not help. Still my own project and another svn-branch of his project do work.
Anybody any ideas on where to look?
Thanks in advance.
Regards,
Martien

I found out that the folder must be the same as in the project file.

Exception [type: SIGSEGV, Address not mapped to object]

Hi,
I'm working on an Oracle Database 11g Release 11.1.0.6.0 - 64bit Production With the Real Application Clusters option.
I'm trying to execute the below:
      SELECT /*+ CURSOR_SHARING_EXACT */
             vc.id_vehicle, gr.geoRouteId, g.name, round(g.length) length_, gr.active,
             g.id_user id_user_georoute_owner, gr.grBindUserId id_user_bind_owner,
             (SELECT count(*) FROM dual WHERE XMLEXISTS('$XML_ALM/user/alarmwhen[@direction="out"]' passing gr.geoRouteUser AS "XML_ALM") = 1) alm_out
        FROM configurator.t_vehicle_configuration vc, dispatch.v_georoute g,
             xmltable('$XML/vehicleconf/GeoRoute/geoRoute[@active="1"]'
               passing vc.x_configuration AS "XML"
               columns geoRouteId   number path '@id',
                       active       number path '@active',
                       grBindUserId number path '@id_user',
                       geoRouteUser xmltype path 'user'
             ) gr
       WHERE vc.id_vehicle = 453
         AND g.id_georoute = gr.geoRouteId;but after few seconds I got the error in the object.
The alert log says:
+Exception [type: SIGSEGV, Address not mapped to object] [ADDR:0x38] [PC:0x483CEFD, evahtr()+495]+
Errors in file /u01/app/oracle/diag/rdbms/evodb/EVODB2/trace/EVODB2_ora_13769.trc (incident=301686):
+ORA-07445: exception encountered: core dump [evahtr()+495] [SIGSEGV] [ADDR:0x38] [PC:0x483CEFD] [Address not mapped to object] []+
Incident details in: /u01/app/oracle/diag/rdbms/evodb/EVODB2/incident/incdir_301686/EVODB2_ora_13769_i301686.trc
The trace doesn't say more:
+ORA-07445: exception encountered: core dump [evahtr()+495] [SIGSEGV] [ADDR:0x38] [PC:0x483CEFD] [Address not mapped to object] []+
+========= Dump for incident 301686 (ORA 7445 [evahtr()+495]) ========+
----- Beginning of Customized Incident Dump(s) -----
+Exception [type: SIGSEGV, Address not mapped to object] [ADDR:0x38] [PC:0x483CEFD, evahtr()+495]+
The strange stuff is that if I remove the
(SELECT count(*) FROM dual WHERE XMLEXISTS('$XML_ALM/user/alarmwhen[@direction="out"]' passing gr.geoRouteUser AS "XML_ALM") = 1) alm_out
from the query, there is no problem.
Do you have any suggestion?
Thanks in advance,
Samuel

The strange stuff is that if I remove the
(SELECT count(*) FROM dual WHERE XMLEXISTS('$XML_ALM/user/alarmwhen[@direction="out"]' passing gr.geoRouteUser AS "XML_ALM") = 1) alm_out
from the query, there is no problem.That's probably because you're not using XMLExists correctly.
The function returns a boolean value so you don't need to test for 1 or 0 as we had to with existsNode function before :
http://download.oracle.com/docs/cd/B28359_01/appdev.111/b28369/xdb04cre.htm#sthref360
It's also probably better to use a CASE expression instead of a subquery :
SELECT /*+ CURSOR_SHARING_EXACT */
       vc.id_vehicle
     , gr.geoRouteId
     , g.name
     , round(g.length) length_
     , gr.active
     , g.id_user id_user_georoute_owner
     , gr.grBindUserId id_user_bind_owner
     , case when XMLExists('$XML_ALM/user/alarmwhen[@direction="out"]' passing gr.geoRouteUser AS "XML_ALM")
            then 1
            else 0
       end as alm_out
FROM configurator.t_vehicle_configuration vc
   , dispatch.v_georoute g
   , xmltable('$XML/vehicleconf/GeoRoute/geoRoute[@active="1"]'
               passing vc.x_configuration AS "XML"
               columns geoRouteId   number path '@id',
                       active       number path '@active',
                       grBindUserId number path '@id_user',
                       geoRouteUser xmltype path 'user'
     ) gr
WHERE vc.id_vehicle = 453
AND g.id_georoute = gr.geoRouteId
;Even better, you can test the condition directly in the COLUMNS clause with fn:exists XPath function.
For example, something like this :
SQL> with sample_data as (
2    select xmltype('<root>
3 <row><item>1</item><other id="a"/><other id="x"/></row>
4 <row><item>2</item><other id="b"/></row>
5 <row><item>3</item><other id="b"/></row>
6 </root>') doc
7    from dual
8 )
9 select x.*
10 from sample_data t
11     , xmltable(
12         '/root/row'
13         passing t.doc
14         columns item number path 'item',
15                 flag number path 'exists(other[@id="x"])'
16       ) x
17 ;
      ITEM       FLAG
         1          1
         2          0
         3          0

Middleware initial load error on funcloc segment type (ADR2) does not exist

Hello,
We are doing initial loads of data into a new CRM 7.0 system.
So far all objects have been done except Functional locations (FUNCLOC).
During the initial load of the functional locations the various BDOCs all go into error state.
The error is the same everywhere: segment type adr2 does not exist.
If we deactivate the adr2 table In transaction R3AC1 and process again, we get the error message for the next table
(Like: segment type IFLOTX does not exist) and so on.
IS there any settings we can do to manage these 'segments' or would there be another wa to solve this?
Thanks.
Joram

Hello,
Take a look at note 1271465, it does not talk about the ADR2 segment but about segment errors in SMW01 for functional location download. It might be useful. Observe especially the constraint in ERP version number, it might be that your ERP system is out-of-date/incompatible for this scenario.
Second thing to check, go to SPRO>CRM>Master Data>Installed Base>Replication of technical objects from ERP
There you'll find a mandatory customizing activity for Functional location download.
And in the documentation of activity "Replication of Functional locations: Prerequisites and General information" you'll find all the necessairy actions to perform.
This helped me in setting up funcloc replication in CRM 7.0.
Hope this helps,
Kind regards,
Joost

Mac Indesign CS5 and Suitcase Fusion 3 "Universal Type Client could not open?

Has anyone got any idea what I can do?
I have CS5 and on launch of Indesign, I get the message dialogue box:
Universal Type Client could not open the Font Vault at the location "". To access your fonts, please launch the Suitcase Fusion Core System Preferences Pane to create a new Font Vault or to select an existing one.
I have tried the following:
made a new Font Vault adn selected it.
logged-out
restarted the mac
reinstalled Extensis Fusion 3
Any ideas?

The best way to get support is to contact our reps directly. They can then walk through the issue with you and give you steps to fix.
http://www.extensis.com/support
Jim Kidwell
Extensis

Movement type 101 does not currently support serial

Hi experts,
I'm trying to realize MIGO for a PO with a material with serial number.
The error msg is " Movement type 101 does not currently support serial number Management." IO306
I already config. spro>plant maintenance & customer service>master data in plant maintenance & customer service->technical objects>serial number management-->define serialization attributes for movement types
And
Plant Maintenance and Customer Service -->Master Data in Plant Maintenance and Customer Service -->Technical Objects --Serial Number Management -->Define Serialization Attributes for Movement Types
And assigned the material to attributes ate MM02.
I have know ideia what else i have to do.
Is there anone here already see that?
Tks
Antonio Oliveira

try posting GR via MB01 transaction instead of MIGO and let us know if you are getting same issue.
also there are few OSS notes created for this kind of issue which has to do with maintainenance of table V_T156SY, check below thread
Movement type 101 does not currently support
yogesh

Error Ke13n_Currency type F is not allowed_Message no. KE527

Hi Experts,
I am getting the below error at the time of executing the ke13n but at the time of uploading the COPA plan data we are using only company code currency 10 for all the company codes.
Currency type F is not allowed
Message no. KE527
I really appreciate for your early response.
Regards,
Mahesh

Hi,
Please check again your upload file and the layout in KEPM.
I guess the Record type F jump to Currency type column.
Julie

Order type 'OR' has not been defined for sales area (IDOC related)

Hi,
iam getting the status error as order type 'OR' has not been defined for sales area for ORDERS inbound idoc(it's in status 51),i looked at EDPAR(voe4) table and edsdc(voe2) tables, the sales area has been defined, i don't know why iam still getting this error. please let me know if anyone have any idea or faced any kind of this problem.
Thanks

Hi,
I believe this is nothing to do with the setting the IDOC value..Some config is missing...
Check to make sure if there is a record found in the view V_TVAKZ for the combination..
IF not check with your function consultant regarding this..
Thanks,
Naren

The enhancement specification of structure type ekko is not consistent

Similar Messages

Maybe you are looking for