The following ABAP Exception occurred: SERVICEKEY_INVALID error message

Hello Gurus,
I am setting up custom LWE and I completed doing that. Now, when I am running the LWE from the portal, I am getting the error "The following ABAP Exception occurred: SERVICEKEY_INVALID" while accessing 'Address', 'Benefits enrollment' 'personal data' etc.
I do not know how to solve this error. Could anybody please suggest how to solve this problem?
Thanks and appreciate much for your help with this!!
Maria Kutty Somori....

Please read the configuration in note 968360
This is normally caused because of a missing or misleading
configuration for the Homepage Framework.
Please ensure the correct customistion is done for the  in the confirmation link ie V_T7XSSSERLNK
check the resource table V_T7XSSSERRES in Homepage Customizing to solve
this issue.

Similar Messages

  • The following ABAP Exception occurred: USER_NOT_FOUND

    Hi,
    A few of my users are receiving the following error :
    The following ABAP Exception occurred: USER_NOT_FOUND
    This only occurs when accessing webdynpro iviews. BSP iviews such as LSO (Learning Solution), SAP transaction iviews etc all work fine.
    The SU01 ECC accounts are all valid and have the neccessary roles. Communications (IT0105) have also been assigned and have valid dates.
    Both users have worked fine with no problems for several years and all of a sudden they have this error.
    We use a Novell LDAP for authentication which is shared by muliple applications and the UME is using dataSourceConfiguration_novell_not_readonly_db.xml
    I have tried deleting and recreating the accounts but this makes no difference. If I create new accounts with a different username they work fine with no problems. But this is not a suitbale work around, plus I would like to find out why this is happening.
    Any advice appreciated
    Thanks
    Craig

    Hi Craig,
    Can you please tell in detail what was wrong with the structural authorisations.
    We are also facing the same issue.
    Thanks
    Amit

  • The following ABAP Exception occurred: LINKLISTKEY_INVALID

    The following ABAP Exception occurred: LINKLISTKEY_INVALID:
    com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCExecuteException
         at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClassExecutable.execute(DynamicRFCModelClassExecutable.java:98)
         at com.sap.xss.ser.xssconfview.fc.FcLinks.onInit(FcLinks.java:256)
         at com.sap.xss.ser.xssconfview.fc.wdp.InternalFcLinks.onInit(InternalFcLinks.java:238)
         at com.sap.xss.ser.xssconfview.fc.FcLinksInterface.onInit(FcLinksInterface.java:115)
         at com.sap.xss.ser.xssconfview.fc.wdp.InternalFcLinksInterface.onInit(InternalFcLinksInterface.java:193)
         at com.sap.xss.ser.xssconfview.fc.wdp.InternalFcLinksInterface$External.onInit(InternalFcLinksInterface.java:257)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:922)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:891)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPMProxy.attachComponentToUsage(FPMComponent.java:1084)
         at com.sap.xss.ser.xssconfview.vc.VcLinks.onInit(VcLinks.java:198)
         at com.sap.xss.ser.xssconfview.vc.wdp.InternalVcLinks.onInit(InternalVcLinks.java:222)
         at com.sap.xss.ser.xssconfview.vc.VcLinksInterface.onInit(VcLinksInterface.java:162)
         at com.sap.xss.ser.xssconfview.vc.wdp.InternalVcLinksInterface.onInit(InternalVcLinksInterface.java:144)
         at com.sap.xss.ser.xssconfview.vc.wdp.InternalVcLinksInterface$External.onInit(InternalVcLinksInterface.java:220)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent.doProcessEvent(FPMComponent.java:564)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent.doEventLoop(FPMComponent.java:438)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent.access$600(FPMComponent.java:78)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.raiseSaveEvent(FPMComponent.java:953)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPMProxy.raiseSaveEvent(FPMComponent.java:1116)
         at com.sap.xss.per.vc.reviewnavi.VcPersInfoReviewNavi.next(VcPersInfoReviewNavi.java:227)
         at com.sap.xss.per.vc.reviewnavi.wdp.InternalVcPersInfoReviewNavi.next(InternalVcPersInfoReviewNavi.java:175)
         at com.sap.xss.per.vc.reviewnavi.ReviewNaviView.onActionNext(ReviewNaviView.java:153)
         at com.sap.xss.per.vc.reviewnavi.wdp.InternalReviewNaviView.wdInvokeEventHandler(InternalReviewNaviView.java:173)
         at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
         at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132)
         at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
         at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:321)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingPortal(ClientSession.java:733)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:668)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
         at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
         at com.sap.tc.webdynpro.clientserver.session.core.ApplicationHandle.doProcessing(ApplicationHandle.java:73)
         at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.sendDataAndProcessActionInternal(AbstractApplicationProxy.java:860)
         at com.sap.tc.webdynpro.portal.pb.impl.localwd.LocalApplicationProxy.sendDataAndProcessAction(LocalApplicationProxy.java:77)
         at com.sap.portal.pb.PageBuilder.updateApplications(PageBuilder.java:1299)
         at com.sap.portal.pb.PageBuilder.SendDataAndProcessAction(PageBuilder.java:326)
         at com.sap.portal.pb.PageBuilder$1.doPhase(PageBuilder.java:868)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processPhaseListener(WindowPhaseModel.java:755)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doPortalDispatch(WindowPhaseModel.java:717)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:136)
         at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
         at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:321)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
         at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(AccessController.java:219)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
    Caused by: com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFC_Fault_Exception: Fault name: LINKLISTKEY_INVALID, fault text: LINKLISTKEY_INVALID
         at java.lang.Class.newInstanceImpl(Native Method)
         at java.lang.Class.newInstance(Class.java:1303)
         at com.sap.aii.proxy.framework.core.JcoMarshaler.unmarshalException(JcoMarshaler.java:429)
         at com.sap.aii.proxy.framework.core.JcoProxy.send(JcoProxy.java:78)
         at com.sap.aii.proxy.framework.core.AbstractProxy$JcoProxyHelper.send(AbstractProxy.java:173)
         at com.sap.aii.proxy.framework.core.AbstractProxy.send$(AbstractProxy.java:141)
         at com.sap.xss.ser.xssconfview.model.CSLinksModel.hrxss_Ser_Getconfscrlinks(CSLinksModel.java:152)
         at com.sap.xss.ser.xssconfview.model.Hrxss_Ser_Getconfscrlinks_Input.doExecute(Hrxss_Ser_Getconfscrlinks_Input.java:137)
         at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClassExecutable.execute(DynamicRFCModelClassExecutable.java:92)
         ... 67 more
    Can nay one suggest anything on this?

    To solve this problem, make sure the LINKLISTKEY  property defined in the Web Dynpro Application properties exists in table T7XSSSERLNK.
    1. To view the link list key in the Web Dynpro app, in NWDS expand the Applications tree and then double click on your application. Click on the "Application Properties" tab, then look at the value for the "sap.xss.linkListKey".
    2. Ensure that value exists in the backend under transactions SPRO --> Personnel Management --> ESS --> General Settings --> Homepage for Self-Services -->Services --> Define Links on Confirmation Page
    Regards,
    Tom

  • When pressing the "R" on the keyboard to record the following pop up - "Beta-only warning message-not to be localized Can't create record files please report" and then this "error occurred Result= -48"  What does this mean?

    When pressing the "R" key on the keyboard to record the following pops up - "Beta-only warning message-not to be localized.  Can't create record file, Please Report"  I press O.K. and this pops up - "Error occurred Result= -48".  Can't figure out why.  First time I have every had problems>  What's up with this?

    a -48 error is a duplicate filename.
    the first things i'd try are the oddball problems fixes:
    http://www.bulletsandbones.com/GB/GBFAQ.html#oddballprobs
    (Let the page FULLY load. The link to your answer is at the top of your screen)

  • I am trying to install MasterCollection_CS6_LS16. When I click the install file I get this error message: We've encountered the following issues. Installation on case-sensitive volumes is not supported. Please choose a different volume for installation.

    I am trying to install MasterCollection_CS6_LS16. When I double click the install file I get this error message: We've encountered the following issues. Installation on case-sensitive volumes is not supported. Please choose a different volume for installation. What does that mean? How should I proceed?

    Hey iraravitz,
    Could you please let me know what version of OS are working on.
    You might receive this error when you attempt to install on a drive with the HFS+ Case Sensitive file system, which is not supported for installation of Adobe Creative Suite 6.
    So, please try installing on a drive that has been formatted with a supported file system.
    You might refer the KB doc link mentioned below for the same:
    Error "Case-sensitive drives not supported" or similar install error | Mac OS
    Let me know if this helps.
    Regards,
    Anubha

  • HT201210 My iPad is not recognized by Finder or iTunes when it is plugged into the computer.  i ran the Restore sequence and got an error message stating "The iPad could not be restored.  An unknown error occurred (1611).  Can this be fixed?

    My iPad is not recognized by Finder or iTunes when it is plugged into the computer.  i ran the Restore sequence and got an error message stating "The iPad could not be restored.  An unknown error occurred (1611).  Can this be fixed?

    iTunes: Specific update-and-restore error messages and advanced troubleshooting - http://support.apple.com/kb/TS3694 - relating to iPad, iPhone, iPod touch, iTunes
    Security software issues covered in: iTunes: Troubleshooting security software issues - http://support.apple.com/kb/TS3125

  • TS3694 hello out there ! am trying to restore my ios, but toward the end of the process, i am receiving an error message like "the iphone could not be restored, an unknown error occured(1015). Kindly help me resolve this problem, my iphone has been down f

    hello good samaritan out there ! am trying to restore my ios for for i phone 3G, but toward the end of the process, i am receiving an error message like "the iphone could not be restored, an unknown error occured(1015). Kindly help me resolve this problem, my iphone has been down for a we

    mazunzo tembo wrote:
    "the iphone could not be restored, an unknown error occured(1015).
    Unauthorized modification of iOS  >  http://support.apple.com/kb/HT3743
    ERROR 1015...
    This Error Code is indicative of the Device being jailbroken / Hacked...
    Sorry... But...
    The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
    You will need to look elsewhere.

  • HT4211 I can't get words to open. I have no other applications open, but every time I tap the icon I gat an oops error message that a problem has occurred. ***

    can't get words to open. I have no other applications open, but every time I tap the icon I gat an oops error message that a problem has occurred. ***

    First try killing Words. When on the home screen double press the HOME button, then swipe the screen image of Words up to close it.
    Next, reset your iPhone by holding HOME and SLEEP until an Apple logo appears. If the problem is not resolved delete the app from your phone, reset the phone again, then reinstall the app.

  • Error message when i try to connect to SharePoint Store, when i click on Sharepoint Store in the site its throwing me below error message,

    Error message "Sorry, we can't seem to connect to the SharePoint Store. Try again in a bit."
    when i try to connect to SharePoint Store, when i click on Sharepoint Store in the site its throwing me above error message,
    In the log it shows
    Request to office.com with the following URL:https://hostname/sites/appcatalog/config15 caused an exception. 
    System.Net.WebException: 
    Request to office.com should be routed with url URL:http://office.microsoft.com/client/15/commerce/query  but 
     request to office.com is sent with following URL:https://hostname/sites/appcatalog/config15
    and the Response from office.com was null or its HTTP status code was not 'OK'. Actual status code: 'InternalServerError'
    An exception was thrown while running task 'GetOfficeMarkets'. Microsoft.SharePoint.SPException: Sorry, we can't seem to connect to the SharePoint Store. Try again in a bit.  
    Feature "Apps that require accessible internet facing endpoints" activated in the Central Admin  .
    kindly help on this issue

    Hi,
    For a better troubleshooting, I suggest to do as follows:
    1. Check whether the App management shared service add to the Farm, and we need to configure the Subscriptions setting service also.
    2. SharePoint Server IP Address excluded from the Websense.
    3. Restart the server.
    4. Please check as the link below.
    http://www.naumanahmed.com/2012/07/sharepoint-2013-app-management-service.html
    More information:
    http://msdn.microsoft.com/en-us/library/fp179919.aspx
    Best Regards
    Dennis Guo
    TechNet Community Support

  • I am using ITUNES 11 on Win 7 64 bit.  I can download podcasts to my IPOD touch just fine but when I click on the ITUNES store I get an error message that stays "ITUNES has stopped working".  How do I trouble shoot or fix this? Thanks

    I am using ITUNES 11 on Win 7 64 bit.  I can download podcasts to my IPOD touch just fine but when I click on the ITUNES store I get an error message that stays "ITUNES has stopped working".  How do I trouble shoot or fix this? Thanks

    Try gn_id's suggestion from the following post:
    Re: iTunes 11 crashes when opening the store - no error message

  • I want to add Narration to my movies. I've watched the Elements Guided Help for Narration. But when I click the RECORD Tab, I get an error message. "Your current audio hardware selection does not have any inout channels." My question, therefore: Do I need

    I want to add Narration to my movies. I've watched the Elements Guided Help for Narration, and closely followed their procedure. But when I click the RECORD tab, I get an error message. "Your current audio hardware selection dos not have any input channels." My question, therefore: Do I need to buy an external microphone? I have an HP Pavilion Laptop, running WIndows 8.1. I thought I had a built-in microphone. But ,maybe not. Please help. Also, WHAT KIND of microphone - exactly - should I buy? Thanks for your help.
    Mike Moore
    Corvallis, Oregon

    mikem
    Go to Edit Menu/Preferences/Audio Hardware and ASIO tab and click on it.
    Under the Input tab, make sure that you have your microphone selected.
    Please let us know the outcome.
    Thank you.
    ATR

  • When i click on the Firefox icon I get an error message, C:\Program Files\Java\jre6\lib\deploy\jqs\ff\..\..\..\..\bin\jqsnotify\.exe cannot be found. What is it? and how do i fix it? in English

    When i click on the icon to open Firefox an error message box appears with the following message, C:\Program Files\Java\jre6\lib\deploy\jqs\ff\..\..\..\..\bin\jqsnotify\.exe cannot be found. It then advises me to use the Search function, but the search function says it is unavailable.
    What is it? and how do I fix it? in English

    See:
    http://www.java.com/en/download/help/quickstarter.xml - What is Java Quick Starter (JQS)? What is the benefit of running JQS? - 6.0

  • I have an original Ipad, I tired to update it, but during the update it gave me an error message (1602) an now it just has a picture of itunes and a ubs cord?  Please help!!

    I have an original Ipad, I tired to update it, but during the update it gave me an error message (1602) an now it just has a picture of itunes and a ubs cord?  Please help!!

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

  • How to keep the field open for input with error message in report program

    Hi,
      Need a help in solving the below issue.
    "How to keep the field open for input with error message in report program"
    Regards,
    C.Shasiraj.

    Hi...
    you have to use the event:
    <b>AT SELECTION-SCREEN ON <FIELD> EVENT.</b>
    u have to give an error message in this event.
    Consider the following <b>Example:</b>
    <b>PARAMETERS : NUMBER TYPE I.
    AT SELECTION-SCREEN ON NUMBER.
      IF NUMBER = 10.
        MESSAGE 'Number vakue is 10' TYPE 'E'.
      ENDIF.
    START-OF-SELECTION.
      WRITE NUMBER.
    </b>
    in this if u give the value of number = 10, it will not proceed further, if u give some other value other than 10 you will proceed further...
    Execute this program once u will understand....
    also Consider the following links :
    <b>Regarding events:</b>
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/79/34a237d9b511d1950e0000e8353423/frameset.htm
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/79/34a23ad9b511d1950e0000e8353423/frameset.htm
    <b>Regarding messages:</b>
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/c5/aa575426ad11d2954d0000e8353423/frameset.htm
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/c5/aa575426ad11d2954d0000e8353423/frameset.htm
    This is very useful.......
    Reward points if useful....
    Suresh....

  • TS1647 My Macbook Pro will not print anything from any program. I've reinstalled the drivers. I get an error message in Word that says, "Word could not communicate with printer." Any ideas?

    My Macbook Pro will not print anything from any program. I've reinstalled the drivers. I get an error message in Word that says, "Word could not communicate with printer." Any ideas?

    Be sure to try restarting, if you have not done so since this problem occurred.  You should also power off the printer while you do the restart...
    If that does not help, you can try resetting the printing system.  Open System Preferences Print & Scan (or Print & Fax) pane.  In the sidebar with list of printers, right (control) click anywhere.  Select Reset printing system.  You will have to add back your printers after you do this.

Maybe you are looking for