The function pool 'SAPLRSDRC' is not available

Hello Expert,
To define the virtual cube with function, 'SAPLRSDRC' is required.
However, in my system, this function pool is not existed.
Do anybody know why?
Thanks
XY

liel_noy wrote:
and how i do it?
You might find this helpful for general knowledge regarding Macs.
Mac 101

Similar Messages

  • Function modules from the function pool Z_MEREP_G (Message no. MEREP_00530)

    We installed a new system and imported the syncbo definitions to this new system.
    After the import and generation of all T01 SyncBOs we get an error. E.g. for MAM25_016:
    Function modules from the function pool Z_MEREP_GEN_T01_MAM25_016 contain syntax errors
    Message no. MEREP_00530
    After investigation the following syntax error is shown:
    Source code   LZ_MEREP_GEN_T01_MAM25_016U04                  Line     641
    The FORM "MAM25_016_CONV_NAME" does not exist, but there is a FORM with the similar name "MAM25_016_I_CONVERSION".
    "MAM25_016_I_CONVERSION".
    We are already using three systems D -> Q -> P. The export/import of files between these systems work okay. But not with the new system. All are on NW04 SPS 18. In the other systems the form is available.
    Does someone have an idea how to solve this?
    Thanks in advance,
    Benjamin de Rijke

    Hello Rahul / Karthick,
    Thanks for the tip, I already reimported these with no effect. Next to this I deleted the function modules for a Z-syncbo (our own developed one). But this didn't help as well.  The MAM-SyncBO function group can not be deleted because the system is not a developement system. We are not allowed to develop things in this environment.
    I have the feeling that it has something to do with the initial setup of this system. All the others were first on SPS15 were we developed the SyncBOs. At a certain time we updated the systems to SPS18 and developed further. No issues so far regarding the import / export of the files from D to Q and P.
    Now we initial installed a new system on SPS18 and on this one the generation failes with the mentioned syntax error.
    Kind regards,
    Benjamin

  • Office 2013 and SharePoint 2013 server properties - The required term set is not available.

    Hi,
    After creating new document from ribbon with the new document function on any template the managed metadata based server properties cannot be selected and properties boxes are grayed out. Mouse over displays "The Required term set is not available".
    Works fine when using it form resource (SharePoint) domain both with user domain and resource domain accounts.
    There is a two-way trust btw domains.
    SPNs are done for AppPools.
    AppPool accounts have delegations and are set to impersonate with GPO.
    SharePoint Web Application is on kerberos authentication.
    There is no difference when sites are using user or resource domain AppPool accounts.
    The WFE and SQL Server have computer delegations.
    Server env: Windows Server 2008 R2 with all updates, SQL Server 2008 R2 with all updates, on-prem SharePoint Server 2013 with no CU.
    User env: Windows 7 ENT, IE10 and Office 2013 with all updates.
    There is no internet connection and internet connection is not possible. The internet connection is cheated with two DNS A record setting for
    www.msftncsi.com and dns.msftncsi.com. Also registry changes "ActiveDnsProbeContent" ip- address for Win7 is done via GPO to private IP. This is done because otherwise check-in/check-out does not work.
    Last things on IIS log are:
    2014-01-24 10:38:36 192.168.n.n PROPFIND /TestDoc - 5445 0#.w|userdomain\test3-user 192.168.51.51 Microsoft+Office+Word+2013+(15.0.4551)+Windows+NT+6.1 207 0 0 639
    2014-01-24 10:38:37 192.168.n.m OPTIONS / - 5445 0#.w|userdomain\test3-user 192.168.51.51 Microsoft+Office+Word+2013+(15.0.4551)+Windows+NT+6.1 200 0 0 842
    2014-01-24 10:38:54 ::1 POST /_vti_bin/sharedaccess.asmx - 5445 - ::1 Microsoft+Office+Word+2013+(15.0.4551)+Windows+NT+6.1 200 0 0 15
    2014-01-24 10:39:25 ::1 POST /_vti_bin/sharedaccess.asmx - 5445 - ::1 Microsoft+Office+Word+2013+(15.0.4551)+Windows+NT+6.1 200 0 0 0
    2014-01-24 10:39:56 ::1 POST /_vti_bin/sharedaccess.asmx - 5445 - ::1 Microsoft+Office+Word+2013+(15.0.4551)+Windows+NT+6.1 200 0 0 15
    2014-01-24 10:40:27 ::1 POST /_vti_bin/sharedaccess.asmx - 5445 - ::1 Microsoft+Office+Word+2013+(15.0.4551)+Windows+NT+6.1 200 0 0 15
    What I missed.
    Br,
    -timo-

    Same problem here!. Giving the computer network access allows the control to be populated. Then I disabled and restarted and it seems to be ok....

  • Lost preferences and when requesting a batch operation  the  error "The command "Batches" is currently not available."

    For CS6 when I started to work again I had lost screen preferences and when tried to run a batch operation I got the message "The command "Batches" is currently not available."  Where are these files stored and how can I restore them?

    Found IT !!!   For Windows - go to users appdata folder and windows has a file restore function.  restored Actions Palette.psp and Adobe Photoshop X64 CS6 Prefs.psp files to previous versions.  Works great.
    Alvin55

  • Error-The RFC destination EDSCLNT900 is not available in ICWC

    Hi All,
    I'm working on CRM Utilities 2007. In the ICWC, I'm getting the error 'The RFC destination EDSCLNT900 is not available'. Kindly help me in resolving this error.
    Regards,
    Archana.
    Edited by: archu_sap on Jul 15, 2009 10:30 AM
    Edited by: archu_sap on Jul 15, 2009 10:33 AM

    Hi,
    You have to maintaine RFC Destination EDSCLNT900 in the CRM system.
    generally we have to maintain RFC (t-code SM59) in the sytem where Function Module is present.
    Suppose you are having FM in ECC system  and you want to call in CRMsystem,  then you have to maintain RFC destination (EDSCLNT900) in ECC system.
    Thanks & Regards.
    ShreeMohan

  • The usage monitor is currently not available

    BT.com message...
    "The usage monitor is currently not available for a small number of customers. We understand how important it is to monitor usage, and as you're not able to view the usage monitor we will not charge you for going over your usage limit this month. You don't need to do anything, we'll take care of that."
    Well, finally BT's complete lack of ability to manage their core business is paying off.....can download/will download.....FANTASTIC!!!
    And if you aren't affected by this and Do go over your limit...I'd complain to ofcom....you can't treat one customer one way and another a more preferential way....
    Oh, and if you pay for anything more than 10MB download per month, I'd also ask for a discount......
    Thank you BT...may your utter incompetence reign supreme forever....
    All hail the God of failure...yes, Mr Buckley...I'm genuflecting in YOUR direction!!!

    Hi Guys,
    Thanks for raising this.  I am sorry that you are having problems with the usage monitor.  I would like to sort this out.
    Can I ask that anyone having issues, Please drop me an email via the 'Contact Us' link in my profile.  (click on my name and you will find the link under the "about me" section).  Include your BT account details and the link to this thread.
    Cheers
    Sean
    BTCare Community Manager
    If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
    We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

  • With PS 7  create new  Place two objects on the new file  then you may cut copy and paste Cs2  create new  place two object on the new file Cut is not available how does one cut and paste in new file

    With PS 7
    create new
    Place two objects on the new file
    then you may cut copy and paste
    Cs2
    create new
    place two object on the new file
    Cut is not available how does one cut and paste in new file

    If your using File>Place then photoshop cs2 creates what's known as Smart Objects, which photoshop 7 didn't have.
    In photoshop cs2 you can rasterize the smart objects and that should make the Cut function available.
    Select both placed layers, right click on the area to the right of the tumbnail and select Rasterize Layers.
    If in photoshop cs2 you to Help>Photoshop Help and look under Layers>Smart Objects, that should give you a good overview of what smart objects are.

  • I am trying to install windows on my mac via bootcamp, and it says I need to download Windows Support Software. I tried, but it says "Download can not continue. The Windows Support Software is not available.

    I am running OSX 10.6.8 Snow lepard I am trying to install windows on my intel imac 20in late 2006  via bootcamp, and it says I need to download Windows Support Software. I tried, but it says "Download can not continue. The Windows Support Software is not available. I bought the Imac secend hand and did not get the install dvd's with it What can I do?

    You don't need to download the Windows support software, because in Snow Leopard, they are only available as a download for the Late 2010 MacBook Air.
    Instead, you have to buy Mac OS X Snow Leopard. The Snow Leopard disc contains the Windows drivers for your Mac, so you have to install them after finishing the Windows installation

  • I'm trying to load video file into CS6 I keep getting error message: 'Could not complete you request because the DynamicLink Media Server is not available.' No Idea what to do next. Help please.

    I'm using CS6 Extended. My OS is "Windows 7 home premium.
    Can no longer load video files into CS6 for edited I keep getting error message:
    'Could not complete your request because the DynamicLink Media Server is not available.'
    Don't know what this means. Until just now I was able to load videos without any problems. Now I'm getting this message. Any thoughts?

    Hi Mylenium,
    upfront:
    I hope I won't be marked as spam now, since I am posting on a few relevant discussions now to this topic.
    However, I really would like to ask the people who have experienced this problem to see if they were able to solve it.
    Now the real deal:
    I posted a question in this discussionDynamicLink Media Server won't let me import video for video frames to layers anymore.
    The linked discussion is a lot younger, which is why I posted there first.
    I also put in information on the steps that I have tried and my computer specifications.
    I am experiencing this problem for a while now and hope you and jones1351may be able to help out.

  • Windows "Easy Connect" does not reply with the password / "Easy Connect is not Available"

    Hello,
    I have posted a related question some time ago, which was eventually resolved. However, after some time a problem with Easy Connect (used for MSRA) came back:
    Whenever I arrive at the point in setting up a MSRA session where Easy Connect is needed, I get the reply: "Easy Connect is not Available". Here is an example of the problem:
    Start MSRA
    --> as expected, a window with "invite someone to help you" and " Help some who has invited you" appears
    Select "invite someone to help you"
    --> as expected, a window with "Who do you want to get help from" appears 
    Select "Invite someone to help you"
    --> as expected, a windows with "How do you want to invite your trusted helper?" appears
    Select "Use Easy Connect"
    --> as expected, the temporary "Create invitation window / checking network capabilities" window appears
    Next, I would expect this windows to close a new window to provide me with the Easy Connect password. However, instead I get the window "Easy Connect is not available".
    I cannot continue. (I have screenshots so can repost with them if that would clarity my question)
    Any suggestion how to resolve would be appreciated.
    (Please do not reply with the 3 suggestions from the FAQ (both computers must run windows 7 / Access to internet is limited / your router does not support Easy Connect - doesn't help)
    More background information and things I have tried:
    The "Easy Connect is not available" window offers the "Tell me more about how to fix this problem" which I have tried, but those suggestions do not help
    If I use the other MSRA option: "Help someone who has invited you" (this would be my typical use case), followed by "help someone new" and than select "Use Easy Connect", I also get the "Easy Connect is not available"
    window instead of the expected option to enter the Easy Connect password. I believe this is that same problem.
    This happed with both the 32 as well as the 64 MSRA versions
    I'm using Window 7 Ultimate, 64 bit with all the latest updates
    This desktop PC is wired to the internet via an Edimax gigabit switch, a Dlink DIR-855 wireless router and a fiber modem in bridge mode
    The W7 desktop has a single active network connection only
    I'm using Windows Firewall and Windows Security Essentials
    Disabling the firewall on the PC did not help
    Network discovery is enabled in Control Panel\All Control Panel Items\Network and Sharing Center\Advanced sharing settings (that’s UPnP – right?)
    The Internet Connectivity Evaluation Tool does not seem to be available anymore from MSFT sites
    Restarting "Peer Name Resolution Protocol" did not help
    Restarting "Peer Networking Identity Manager Properties" did not help
    Starting up with a "Clean Boot" (disabled all non-Microsoft services using MSConfig) did not help
    I would also be interested to understand how I can check on the status of the "Easy Connect" service. Is this a service hosted somewhere, or??
    Thanks!

    Dear Andy,
    Thanks a lot for your reply. Let me answer your questions:
    Q: Could you use the other methods: save this invitation as a file and use e-mail to send invitation?
    A: yes, that way I can establish a MSRA connection
    Q: Have you disable other network connections, including disable all virtual network card?
    A: if I check with ‘Device Manager/Network Adapters’ (or Control Panel/Network and Internet/Network Connections) I see two network adapters (my Asus motherboard has two network connectors). Both are available, but only one is used. I have
    disabled one. Unfortunately, this does not solve the problem. I will leave it disable for now.
    Q: To find detailed information about this issue, please locate to event view and find the logs about remote assistance.
    A: I have to admit that the Event Viewer is unfamiliar territory for me. So, I’m not sure where and what to look for. However, as suggested, I found "Event Viewer (local)/Applications and Services Logs/Microsoft/Windows/Remote assistance/Operational".
    Each time, I attempt to use MSRA/Easy Connect, it seems two entries are added. As I cannot seem to upload files with this post, here are just the two entries:
    “Diagnosis Repro Attempt resulted in a failure.”
    “Remote Assistance troubleshooting has confirmed the problem: Remote Assistance Easy Connect isn't available.”
    If you need more details, please suggest what to forward or check. I'm eager to find a solution!
    W.

  • I updated to Yosemite.  iPhoto says I need to update to the latest version.  The app store says the version I need is not available in the US.  Thus iPhoto won't work or even open at this point

    I updated to the yosemite system.  My iPhoto says I need to update to the latest version for it to work with yosemite.  The app store searches and then states the version I need is not available in the US.  Currently I cannot use iPhoto.  Suggestions?

    Csound1,
    Thanks for the hint about not emptying the trash.  I will try to work on this tonight or tomorrow morning and let you know if "this helped me".
    Russell,
    If you go into the iLife support forum for iPhoto, there are a couple good threads.  Basically, iPhoto can't be downloaded by anyone anywhere in the world unless the app store has it listed in your "purchases" list.  The threads contain a lot of steps and it looks like this could be difficult for novices like me.
    Rysz,
    I will also look at the link you provided before I get started.  Thanks.

  • How to populate the Language Key description is not available

    Hi,
    Question: How to populate the Language Key description is not available in the Customer text table
    The problem is ;
    Customer no : 0012345
    For this Customer no description is maintained only in EN, JA ,FR from R3 side.
    EN : HP International Ltd
    JP:HP の国際的な株式会社
    FR: Ltd International de HP
    There is no value for Language ES.
    BW side:
    User is login into language Key ES and executing the report based on this Customer no. There is no Customer text value maintained in language Key ES. It should populate the text value empty. BW system - Language ES is installed.
    I have a Reporting requirement is - I need to populate the text value for this customer No: HP International Ltd when the user login to language Key ES and execute his reports.
    /BI0/TCUSTOMER – Customer text table – I am able to see the description for the EN, JP, FR text values.
    EN: HP International Ltd
    JP: HP の国際的な株式会社
    FR: Ltd International de HP
    If the Customer text is not available in the text table of customer for language key ES - I have to populate the any one of the existing customer text values into the language key ES - example
    0012345 ES  HP International Ltd
    Simplest solution if we maintained ES customer description in R/3 should be ok.
    Is their any other logic which I can implement in BW.

    Hi,
    If you are opting to load Customer Text, there are two options:
    1. R/3 maintained.
    2. Generic Extraction using Flat Files.
    Hope it helps..
    Regards,
    GPK.

  • The Security Token Service is not available -- SP Server on Windows 7

    I just installed SharePoint Server 2010 on a Windows 7 workstation with the aim of setting up a development environment.
    Installed all the prerequisites, then SP, everything seemed to go smoothly.
    However, the Health Analyzer is warning my that "the Security Token Service is not available". It says that the "Administrator should try to restart the Security Token Service"
    I looked under Services for my computer and also looked in IIS, did not see any thing that referenced security tokens. Where would I find the security token service?
    Thanks.

    No.
    In Central Admin>Application Management>Manage Service Applications I see the
    Security Token Service Application is running. But the health analyzer is still saying that
    The Security Token Service is not available.
    Any advice on resolving this would be greatly appreciated.

  • The Binding of Isaac is not available on your current platform.

    Hello,
    I'm trying to play to the The Binding of Isaac, a game on steam.
    When I press on the "PLAY NOW" button I get the error "The Binding of Isaac is not available on your current platform.", although it is available on Linux (and my friends can play it on Ubuntu).
    I'm running Arch 64, multilib repository is of course enabled, and everything is updated.
    Anybody has any clue?

    Then you should just ask your friends, because there is no Binding of Isaac for Steam for Linux, because the developer doesn't have the source code anymore and can't provide the game for Steam for Linux.
    So your friends are either magicians, that can play games on a platform, that the developer itself is not able to provide support for, or they don't play it on Steam for Linux.

  • The CMS system database is not available (FWM 02088)

    Hi all,
    After installation of BOE 3.1 the system fires back the error message on attempt to logon to CMS:
    Account Information Not Recognized: The CMS system database is not available. This error cannot be rectified by the end user. Report this error to your system administrator or database administrator. (FWM 02088)
    Any inputs? I've tried with new SIA as well as fresh installation but the issue persists.
    Regards.

    were you able to see any DB error messages in event log ?
    can you connect to your DB from the server itself ? (could be FW issue)
    What do you see under the CCM ? Do the SIA is in green state ?
    For me it is probably one of 2 things : FW issue (but install will have failed) or DB issue
    Sam.
    Edited by: sjolly on Sep 17, 2009 9:46 AM

Maybe you are looking for