Error In MIRO GL account allows only output tax

Hello All,
We are facing an error in MIRO that GL account xxxxx allows only out put tax. The scinario & settings are as below.
FB60
There is no error when using the particular tax code sytem posts the document
MIRO
Same vendor & tax code used as in FB60
The systemshows an error that GL ***** allows only output tax.
TAX CODE settings in FTXP
The GL showing error is in tax code
GL settings
In GL master data in control tab , the tax category is defined as out put tax
QUERY
Why in FB60 it allows the GL & not in MIRO ( Both are vendor invoice and suppose to work in similar manner)
please note in both the cases the entries are same
Vendor Cr
Expense / Stock Dr
VAT GL **** Cr
VAT GL-2 Dr
VAT GL**** is not picking @ MIRO & Picks @ FB60 with out any error
Any Idea !!!
Thanks & Regards
Arun R

Hi,
The problem is resolved .
The error was due to the fact that the VAT was an aquisiton tax for europe.
The details are in note 373587
Thanks for the support
Regards
Arun

Similar Messages

MIRO should be allowed only for the accepted Qty (QC accepted qty)

Hi Friends
I have one more requirement ,
MIRO should be allowed only for the accepted Qty (QC accepted qty) or Subcontract MIRO should be allowed only for the quantity accepted by QC
with QM control key in material master(QM view) we can block for payment,
but my query is MIRO should not be saved (message should come qty still lying in Quality inspection stock)
Please let me know the settings,
Thanks & Regards
Gajendranath

Hii,
Yes it is possible to restrict Invoice passing in MIRO if the Stock is in Quality stock / Blocked stock. The concept is while doing MIRO, u can validate the criteria by clicking simulation tab. U can get the things in BADI (Business ad in function) with the BADI object name as "Invoice_update".
The working is when the material is in quality stock & If ur doing MIRO for the same material, then system will pop up the message that "material with "X" qty is in quality stock" Invoice cannot be made. System does'nt allow u to pass the Invoice unless the stock is cleared from the quality. Even for the blocked stock we can simulate these error pop message.
with regards,
K.Lokesh.

While creating VK11 for output tax it should allow only Output taxcode

Hi all,
while creating condition record VK11 for output tax ,in condition record only output tax code should be possible ,if they use any input tax code then error messsage should come or system should not allow to create.how we do this.
Thanks in Advance,
Bala

Hi ,
If you see it practically in Production..You will be maintaing condition record once and even if changes, it won't be so often. Secondly in Tax procedure what ever Tax codes are present that will displayed as a choice while maintainig condition record.
If it affecting by maintaining wrong code then better would to be educate Business users as per my understanding.
Thanks,
Veerendra

EWA Error : EWA to SAP is allowed only for test or production syetm

I setup EWA in SDCCN, Choose Task ->Create ->Request session data-> Periodic:-EarlyWatch Alert.
At the last step to confirm, I received error "EWA to SAP is allowed only for test or production syetm".
When can I do?

Hi,
1. Which system for EWA
2. Create Production system for EWA and open the connection for SAP.
Regards,
Srini Nookala

Error while posting " gl account is relevant to tax; check code"

Dear Experts
During invoice booking while posting into GL the warning message appears "" Gl account is relevant to tax; check code" and this is making our work a bit tough , please check why this message is coming.
as previously it was not there.
Regards,
Charmaine Martin

Dear:
I have a solution and i hope this will resolve your issue. Please follow as given under.
Use transaction OBA5 and enter FS as Area. You will find message no 219 there please keep the following settings against it
Keep User name as Blank
and for Online - Batch - (- means message will be turned off). If you do not find Message No 219 then please go to new entry and do the settings as mentioned above.\
Regards

While creating VK11 for output tax error should be ther for input tax codes

Hi all,
while creating condition record VK11 for output tax ,in condition record only output tax code should be possible ,if they use any input tax code then error messsage should come or system should not allow to create.how we do this.
Thanks in Advance,
Bala

Hi Jelena Perfiljeva ,
Thanks for the Reply
Its JIVP,JIVC , VAT condition types (India).

Only input tax is allowed for account 26361212 6000, A0 is not allowed

Dear All,
While doing the J1iH - additional excise transaction - the above error is appearin and the above GL belongs to AED account and the A0 tax code is output tax code is shown in error message (which i have not used any where)
but if i am trying post additional excise without AED then error " FI/CO interface: Update call without succesful check " appearing
please let me know what are the reasons for this
Regards,
Sanju

Hi,
Use t.code: FS00, enter G/L account 26361212 & company code and keep * {All tax types allowed} in tax category field in the control data TAB & save.
Now try your transction.
NOTE: Also check whether posting without taxes is ticked or not
Regards,
Biju K

HT1420 Hi I am trying to sync my pone but wont allow me to transfer music purchased on the phone. States I have 5 authorised computers on my account but when i logg into my account it only identifies 1 so i carn't deactive? trying to backup data to put

Hi I am trying to sync my ip3 but wont allow me to transfer music purchased on the phone to itunes on the laptop. States I have 5 authorised computers on my account but when i logg into my itunes account it only identifies 1 so i carn't deactive all to start again? I am trying to backup data fom myip3 to put on ip4 so carnt even complete sync atm Any ideas on what to do??

To change the iCloud ID you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iDevice, then sign back in with the ID you wish to use.
If your sister doesn't know the password for her old ID, and if her old ID is an earlier version of her current ID, she needs to temporarily recreate the old ID so you can delete if from your phone using her current password. To do this, have her go to https://appleid.apple.com, click Manage my Apple ID and sign in with her current iCloud ID. Click edit next to the primary email account, change it back to her old email address and save the change. Then edit the name of the account to change it back to her old email address. You can now use the password for her current ID to turn off Find My iDevice on your device, even though it prompts you for the password for her old account ID. After you do this, Next, have your sister recreate her current ID again by going back to https://appleid.apple.com and changing her primary email address and iCloud ID name back to the way it was.
Then your can save any photo stream photos that you wish to keep to the camera roll on your device, then go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted. You will be prompted to either keep or delete the iCloud data from your device. If the data is already in another account you can choose Delete. If you need to migrate it to another account, choose Keep, then choose Merge when signing into the new account.

Error for output tax code:Tax code I4 may only contain one assignment line.

Hi
While posting customer invoice with output tax code, I am getting following error.
Tax code I4 may only contain one assignment line.
Please help me resolve.
Regards
Rekha

There are quite some answered questions in this forum for this issue.
Here is one.
Error in Sample document (Message no. FF731)
Also, please search the forum with the following search key words.
Tax AND code AND may AND only AND contain AND one AND assignment AND line
Make sure you select all posts, not just the past 90 days (the default option), and you will see quite some hits.

TS4009 The error that my icloud account is full and need more storage stays on the screen of my Ipad2. It won't allow me to get more, turn it off or do anything on it. Help!!

The error that my icloud account is full and need more storage stays on the screen of my Ipad2. It won't allow me to get more, turn it off or do anything on it. Help!!

Reset: Hold the Sleep/Wake and Home buttons until the screen goes dark and the Apple logo appears
Then do some house cleaning in iCloud (or purchase more storage)
Settings > iCloud > Storage & Backup > Manage Storage > Select a device if more that one > Show All Apps and turn off some apps that you don't need or care to be backed up.
Also, connect to iTunes and empty your Camera Roll onto your computer. Photos & videos tend to eat up a lot of space.

Error Item Category 04000 not allowed in accounting transaction 0300/0001

When we are posting a Incoming payment document with debit to -bank charges refund and bank account ,got the error Item Category 04000 not allowed in accounting transaction 0300/0001.
Please advice.
Edited by: mysap query on Feb 24, 2009 2:56 AM

Hi
This issue is related to document splitting. Unfortunately I don't have access to an ECC6 system today so can't give you the specific solution, however you need to check the config settings in the following path:
IMG > Financial Accounting (New) > General Ledger Accounting (New) > Business Transactions > Document Splitting > Classify Document Types for Document Splitting
If you are unable to resolve this, you should ask for assistance from a FI consultant.
Regards
Kylie

Error in MIRO for input tax calculation

HI Gurus,
We are facing problem at the time of logistic invoice verification in case of purchase orders with account assignments. Following is the set-up for executing MIRO:
1.     Purchase Order with (PO no. 4700000010)
1.1.     Account assignment category.
1.2.     Tax code.
2.     Goods Receipt MIGO
3.     Vendor Invoice booking MIRO
After doing about mentioned steps, document created at the MIGO step shows correct liability and Asset / Expense a/c.
At the time of vendor invoice verification (MIRO), system picks up only CST condition for vendor liability and non deductible excise conditions are reversed against the asset/expenses. For E.G.
1. PO created
Basic amount                   100.00
+ Basic Excise (16%)        16.00 (non-deductible)
+ Ecess             (02%)       00.32 (non-deductible)
+ Hcess             (01%)       00.16 (non-deductible)
+ CST                (03%)       03.49 (non-deductible)
                   119.97
2. MIGO Transaction
Asset / Expenses A/c -
Dr        119.97
To Prov. For Liability                          119.97
3. MIRO Transaction
Provision for Liability A/c -
Dr   119.97
To Vendor a/c.                                       103.97
To Asset / Expenses a/c                           16.00
(16.00 Basic excise duty)
At the time of MIRO, it should had posted
Provision for Liability A/c -
Dr   119.97
To Vendor a/c.                                       119.97
In case Pos without account assignment all accounting entry are posting correctly.
Kindly provide suitable solution ASAP.
Thanks in advance

Hi All,
Thank you for support. But my problem is not getting solved. Situation is as below
Entry is generated
GR/IR Dr. 100
Tax     Dr.    25.50
Vendor          Cr. 101.25 (90% split on total amount)
Vendor          Cr.   11.25 (10% split on total amount)
Items are split based on installment payment term correctly. however since tax need to be paid immediately it should split like this:
GR/IR Dr. 100
Tax     Dr.    25.50
Vendor          Cr. 115.50 (90% split of 100 GR/IR value + 25.5 of tax )
Vendor          Cr.   10 (10% split)
Then in OBY6 I enabled amount split. When I try to post invoice in MIRO with amount split I am getting error: Account assignment not completed for all required fields (PayT) Message no. F5A034. And in payment tab payment terms fields are missing. I have ticked 'Enable amount split' in OBY6. and have updated amount split tab.
How to do this in system?
Thanks,
Pushkar
Edited by: Pushkar Marathe on Sep 3, 2011 7:23 AM

Tacacs authentication fails for one user account for only one switch

Hi,
I am having an scenario, where as Tacacs authentication fails for one user account for only one switch.
The same user account works well for other devices.
The AAA configs are same on every devices in the network.
Heres the show tacacs output from the switch where only one user account fails;
              Socket opens:        157
             Socket closes:        156
             Socket aborts:        303
             Socket errors:          1
           Socket Timeouts:          2
   Failed Connect Attempts:          0
        Total Packets Sent:       1703
        Total Packets Recv:       1243
          Expected Replies:          0
What could be the reason ?
No errors on ACS server; same rights had been given to the user account.
Thanks to advise.
Prasey

Hi there,
Does the user get authenticated in the ACS logs?
reports and activity----> failed attempts
ro
reports and activity-----> passed authentications
That will help narrow it down.
Brad

CO OBJECT ERROR IN MIRO FOR UNPLANNED DEL COST

Dear Friends
I m facing one error in MIRO can u guide me in that context.
well in MIRO i m postin Unplanned deliver cost.......and it is asking me assignment to this G/L for Cost center object..
ERROR: Account 40201070 requires an assignment to a CO object
..I have already assigned the Cost center for the G/l in OKB9 is there anything else has to be done
Actually we have 4 plants and 4 Business area i.e whenever i am doing any posting for BW01 -and Business Area BA01 My cost center BW01402 will get hit similarly for other plant and Business are Cost center has been assigned in OKB9 in Details per business Area,is it the right method or anything else has to be done.
Actually in OKB9 i have maintained that GL and in Detail per business area i have maintained cost center per business area
we have assigned the right Cost senter only i.e for different Plant and differenct business area we have asigned different cost center.
Then y i m getting error i m not understanding..
Please guide me in this context.
Also i am trying other method of posting Freight (unplanned delviery cost ) as well as labour charge through ACTIVATING -"Activate Direct Posting to G/L Accounts and Material Accounts"
So that for particular G/L I can Debt or credit that account,in which will doing MIRO G/L Tab gets activated ,i m entering G/L and entering amount for freight and Labor is this the correct procedure.
Regards
shailesh

I have already assigned this G/L as primary cost element in FS00 and in OKB9 also Cost center is assigned as per Business Area as mentioned in the thread
i.e we have 4 plants and 4 business area so we assigned 4 cost centers to 4 business area, so whenver i m postin unplanned delivery cost for a particular plant then my GL should hit with proper cost center but still it is asking for CO OBJECT
ERROR IS:
"Account 40201070 requires an assignment to a CO object"
If i maintained the default Cost center in FS00 in cost element then it doesnt give error but my requirement is that for a particular plant ,and business are only cost area assigned to it should hit
Any other solutions.
Thankz and regards
Shailesh

Down Payment Received - Output Tax Account definition

Hi,
I have defined reconciliation account for down payment received under OBXR, and it works fine. However, the issue comes when we post output tax received along with customer down payment. I get the error "No taxes on sales/purch.are allowed for account 214010, O1 is not allowed". 214010 is our customer down payment account.
It looks like I have to define tax account under "Define Tax Accounts for Down Payments Received (OB40)" and also "Define Account for Tax Clearing (OBXB)". I am not sure where in OB40 and OBXB I have to define these accounts. Or is it enough if I just define tax account for down payment under OB40 and don't do anything in OBXB.
I appreciate your help.
Thank you

> Hi,
>
> I have defined reconciliation account for down
> payment received under OBXR, and it works fine.
> However, the issue comes when we post output tax
> received along with customer down payment. I get the
> error "No taxes on sales/purch.are allowed for
> account 214010, O1 is not allowed". 214010 is our
> customer down payment account.
> <b>Go to your GL account 214010 in FS00 in change mode and make the following settings from F4. < Output tax account</b>
> It looks like I have to define tax account under
> "Define Tax Accounts for Down Payments Received
> (OB40)" and also "Define Account for Tax Clearing
> (OBXB)". I am not sure where in OB40 and OBXB I have
> to define these accounts. Or is it enough if I just
> define tax account for down payment under OB40 and
> don't do anything in OBXB.
> <b>Once u make the above settings then the system will tell you whether you need to define other accounts for postings once you make postings.</b>> I appreciate your help.
>
> Thank you

Error In MIRO GL account allows only output tax

Similar Messages

Maybe you are looking for